Ahmed, R., Priimagi, A., Faul, C. F. J., & Manners, I. (2012). Redox-active, organometallic surface-relief gratings from azobenzene-containing polyferrocenylsilane block copolymers. Advanced Materials, 24(7), 926-931. https://doi.org/10.1002/adma.201103793

Ahonen, T., Hanski, J., Hyvärinen, M., Kortelainen, H., Uusitalo, T., Vainio, H., ... Koskinen, K. (2019). Enablers and barriers of smart data-based asset management services in industrial business networks. teoksessa Lecture Notes in Mechanical Engineering (Sivut 51-60). (Lecture Notes in Mechanical Engineering). Pleiades Publishing. https://doi.org/10.1007/978-3-319-95711-1_6

Alanen, J., Ruiz Morales, E., Muhammad, A., Saarinen, H., & Minkkinen, J. (2019). Remote diagnostics application software for remote handling equipment. Fusion Engineering and Design. https://doi.org/10.1016/j.fusengdes.2019.01.125

Alatalo, M., Pitkänen, H., Ropo, M., Kokko, K., & Vitos, L. (2013). Modeling of steels and steel surfaces using quantum mechanical first principles methods. teoksessa Physical and Numerical Simulation of Materials Processing VII (Vuosikerta 762, Sivut 445-450). (Materials Science Forum; Vuosikerta 762). https://doi.org/10.4028/www.scientific.net/MSF.762.445

Andersson, P., Kilpi, L., Holmberg, K., Vaajoki, A., & Oksanen, V. (2016). Static friction measurements on steel against uncoated and coated cast iron. Tribologia, 34(1-2), 5-40.

Antin, K. N., & Pärnänen, T. (2017). Democratizing composites manufacturing -inexpensive tooling empowers new players. SAMPE Journal, 53(4), 6-10.

Backas, J., & Ghabcheloo, R. (2019). Nonlinear model predictive energy management of hydrostatic drive transmissions. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 233(3), 335-347. https://doi.org/10.1177/0959651818793454

Banichuk, N., Ivanova, S., & Jeronen, J. (2020). Moving Web and Dynamic Problem of Aerothermoelastic Vibrations and Instability. teoksessa D. A. Indeitsev, & A. M. Krivtsov (Toimittajat), Advanced Problems in Mechanics: Proceedings of the 47th International Summer School-Conference on Advanced Problems in Mechanics, APM 2019 (Sivut 66-71). (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-030-49882-5_7

Barreca, D., Carraro, G., Gasparotto, A., Maccato, C., Warwick, M. E. A., Kaunisto, K., ... Mathur, S. (2015). Fe2O3-TiO2 Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation. Advanced Materials Interfaces, 2(17). https://doi.org/10.1002/admi.201500313

Barreca, D., Carraro, G., Gasparotto, A., Maccato, C., Altantzis, T., Sada, C., ... Bals, S. (2017). Vapor Phase Fabrication of Nanoheterostructures Based on ZnO for Photoelectrochemical Water Splitting. Advanced Materials Interfaces, 4(18), [1700161]. https://doi.org/10.1002/admi.201700161

Bautista, G., Mäkitalo, J., Chen, Y., Dhaka, V., Grasso, M., Karvonen, L., ... Kauranen, M. (2015). Second-harmonic generation imaging of semiconductor nanowires with focused vector beams. Nano Letters, 15(3), 1564-1569. https://doi.org/10.1021/nl503984b

Belardini, A., Leahu, G., Petronijevic, E., Hakkarainen, T., Koivusalo, E., Piton, M. R., ... Sibilia, C. (2020). Circular dichroism in the second harmonic field evidenced by asymmetric AU coated gaas nanowires. Micromachines, 11(2), 1-8. https://doi.org/10.3390/mi11020225

Björling, M., Miettinen, J., Marklund, P., Lehtovaara, A., & Larsson, R. (2015). The correlation between gear contact friction and ball on disc friction measurements. Tribology International, 83, 114-119. https://doi.org/10.1016/j.triboint.2014.11.007

Boardman, A. D., Alberucci, A., Assanto, G., Grimalsky, V. V., Kibler, B., McNiff, J., ... Valagiannopoulos, C. A. (2017). Waves in hyperbolic and double negative metamaterials including rogues and solitons. Nanotechnology, 28(44), [444001]. https://doi.org/10.1088/1361-6528/aa6792

Bolelli, G., Milanti, A., Lusvarghi, L., Trombi, L., Koivuluoto, H., & Vuoristo, P. (2016). Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings. Tribology International, 95, 372-390. https://doi.org/10.1016/j.triboint.2015.11.036

Borah, D., Rasappa, S., Senthamaraikannan, R., Holmes, J. D., & Morris, M. A. (2014). Graphoepitaxial Directed Self-Assembly of Polystyrene-Block-Polydimethylsiloxane Block Copolymer on Substrates Functionalized with Hexamethyldisilazane to Fabricate Nanoscale Silicon Patterns. Advanced Materials Interfaces, 1(3), [1300102]. https://doi.org/10.1002/admi.201300102

Borah, D., Rasappa, S., Kosmala, B., Holmes, J. D., & Morris, M. A. (2012). Block copolymer self-assembly on ethylene glycol (EG) self-assembled monolayer (SAM) for nanofabrication. teoksessa Nanoscale Materials Modification by Photon, Ion, and Electron Beams (Vuosikerta 1450, Sivut 8-13) https://doi.org/10.1557/opl.2012.1224

Bourhis, K., Massera, J., Petit, L., Koponen, J., Fargues, A., Cardinal, T., ... Ferraris, M. (2015). Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties. Materials Research Bulletin, 70, 47-54. https://doi.org/10.1016/j.materresbull.2015.04.017

Cao, X., Aref, M. M., & Mattila, J. (2019). Design and Control of a Flexible Joint as a Hydraulic Series Elastic Actuator for Manipulation Applications. teoksessa Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019 (Sivut 553-558). [9095773] (IEEE International Conference on Cybernetics and Intelligent Systems). IEEE. https://doi.org/10.1109/CIS-RAM47153.2019.9095773

Caraffi, C., Vojir, T., Trefný, J., Šochman, J., & Matas, J. (2012). A system for real-time detection and tracking of vehicles from a single car-mounted camera. teoksessa 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012 (Sivut 975-982). [6338748] https://doi.org/10.1109/ITSC.2012.6338748

Carfora, D., Di Gironimo, G., Järvenpää, J., Huhtala, K., Määttä, T., & Siuko, M. (2015). Divertor remote handling for DEMO: Concept design and preliminary FMECA studies. Fusion Engineering and Design, 98-99, 1437-1441. https://doi.org/10.1016/j.fusengdes.2015.06.056

Carfora, D., Gironimo, G. D., Esposito, G., Huhtala, K., Määttä, T., Mäkinen, H., ... Mozzillo, R. (2016). Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach. Fusion Engineering and Design, 112, 324-331. https://doi.org/10.1016/j.fusengdes.2016.08.023

Chang, B., Routa, I., Sariola, V., & Zhou, Q. (2011). Self-alignment of RFID dies on four-pad patterns with water droplet for sparse self-assembly. Journal of Micromechanics and Microengineering, 21(9), [095024]. https://doi.org/10.1088/0960-1317/21/9/095024

Chang, B., Sariola, V., Jääskeläinen, M., & Zhou, Q. (2011). Self-alignment in the stacking of microchips with mist-induced water droplets. Journal of Micromechanics and Microengineering, 21(1), [015016]. https://doi.org/10.1088/0960-1317/21/1/015016

Cheng, Y. C., Lu, H. C., Lee, X., Zeng, H., & Priimagi, A. (2019). Kirigami-Based Light-Induced Shape-Morphing and Locomotion. Advanced Materials, [1906233]. https://doi.org/10.1002/adma.201906233

Christophe, F., Ritola, T., Coatanéa, E., & Bernard, A. (2011). Semantic analysis of function-solution duality. teoksessa ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (Vuosikerta 3, Sivut 611-619) https://doi.org/10.1115/IMECE2011-63546

Chronopoulos, A., Thorpe, S. D., Cortes, E., Lachowski, D., Rice, A. J., Mykuliak, V. V., ... del Río Hernández, A. E. (2020). Syndecan-4 tunes cell mechanics by activating the kindlin-integrin-RhoA pathway. Nature Materials. https://doi.org/10.1038/s41563-019-0567-1

Claude, S., Ginestet, S., Bonhomme, M., Escadeillas, G., Taylor, J., Marincioni, V., ... Altamirano, H. (2019). Evaluating retrofit options in a historical city center: Relevance of bio-based insulation and the need to consider complex urban form in decision-making. Energy and Buildings, 182, 196-204. https://doi.org/10.1016/j.enbuild.2018.10.026

Coatanéa, E., Ritola, T., Tumer, I. Y., & Jensen, D. (2010). A framework for building behavioral models for design-stage failure identification using dimensional analysis. teoksessa Proceedings of the ASME Design Engineering Technical Conference (Vuosikerta 5, Sivut 591-601). AMER SOC MECHANICAL ENGINEERS. https://doi.org/10.1115/DETC2010-28864

Coatanéa, E., Yannou, B., Honkala, S., Lajunen, A., Saarelainen, T., & Makkonen, P. (2008). Measurement theory and dimensional analysis: Methodological impact on the comparison and evaluation process. teoksessa 19th International Conference on Design Theory and Methodology and 1st International Conference on Micro and Nano Systems, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007 (Sivut 173-182). AMER SOC MECHANICAL ENGINEERS. https://doi.org/10.1115/DETC2007-34364

Coatanéa, E., Nonsiri, S., Christophe, F., & Mokammel, F. (2014). Graph based representation and analyses for conceptual stages. teoksessa 34th Computers and Information in Engineering Conference (Vuosikerta 1A). The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201435652

Coatanéa, E., Wu, D., Tsarkov, V., Gary Wang, G., Modi, S., & Jafarian, H. (2018). Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs. teoksessa 38th Computers and Information in Engineering Conference (Vuosikerta 1B-2018). The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201885895

Cochrane, C., Mordon, S. R., Lesage, J. C., & Koncar, V. (2013). New design of textile light diffusers for photodynamic therapy. Materials Science and Engineering C: Materials for Biological Applications, 33(3), 1170-1175. https://doi.org/10.1016/j.msec.2012.12.007

Colace, L., Santoni, F., & Assanto, G. (2013). A near-infrared optoelectronic approach to detection of road conditions. Optics and Lasers in Engineering, 51(5), 633-636. https://doi.org/10.1016/j.optlaseng.2013.01.003

Czaplicki, R., Mäkitalo, J., Siikanen, R., Husu, H., Lehtolahti, J., Kuittinen, M., & Kauranen, M. (2015). Second-Harmonic Generation from Metal Nanoparticles: Resonance Enhancement versus Particle Geometry. Nano Letters, 15(1), 530-534. https://doi.org/10.1021/nl503901e

Czaplicki, R., Kiviniemi, A., Huttunen, M. J., Zang, X., Stolt, T., Vartiainen, I., ... Kauranen, M. (2018). Less Is More: Enhancement of Second-Harmonic Generation from Metasurfaces by Reduced Nanoparticle Density. Nano Letters, 18(12), 7709-7714. https://doi.org/10.1021/acs.nanolett.8b03378

Debnath, S. C., Das, A., Basu, D., & Heinrich, G. (2013). Naturally occurring amino acids: A suitable substitute of N-N/-di-phenyl guanidine (DPG) in silica tyre formulation? KGK: KAUTSCHUK GUMMI KUNSTSTOFFE, 66(1-2), 25-31.

Di Vito, D., Mosallaei, M., Vahed, B. K., Kanerva, M., & Mäntysalo, M. (2020). Deformability analysis and improvement in stretchable electronics systems through finite element analysis. teoksessa A. Carcaterra, G. Graziani, & A. Paolone (Toimittajat), Proceedings of XXIV AIMETA Conference 2019 (Sivut 755-763). (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-030-41057-5_61

Doddapaneni, T. R. K. C., Praveenkumar, R., Tolvanen, H., Rintala, J., & Konttinen, J. (2018). Techno-economic evaluation of integrating torrefaction with anaerobic digestion. Applied Energy, 213, 272-284. https://doi.org/10.1016/j.apenergy.2018.01.045

Ellman, A., Wendrich, R., & Tiainen, T. (2016). Framework and feasibility study for pairwise comparison tool. teoksessa Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016 [DETC2016-59886] Charlotte, North Carolina: ASME. https://doi.org/10.1115/DETC2016-59886

Evans, D. M., Holstad, T. S., Mosberg, A. B., Småbråten, D. R., Vullum, P. E., Dadlani, A. L., ... Meier, D. (2020). Conductivity control via minimally invasive anti-Frenkel defects in a functional oxide. Nature Materials. https://doi.org/10.1038/s41563-020-0765-x

Fafarman, A. T., Hong, S. H., Caglayan, H., Ye, X., Diroll, B. T., Paik, T., ... Kagan, C. R. (2013). Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals. Nano Letters, 13(2), 350-357. https://doi.org/10.1021/nl303161d

Far, M. F., Mustafa, B., Martin, F., Rasilo, P., & Belahcen, A. (2018). Flux-Weakening Control for IPMSM Employing Model Order Reduction. teoksessa 2018 23rd International Conference on Electrical Machines, ICEM 2018 (Sivut 1510-1516). IEEE. https://doi.org/10.1109/ICELMACH.2018.8506693

Far, M. F., Mukherjee, V., Martin, F., Rasilo, P., & Belahcen, A. (2018). Model Order Reduction of Bearingless Reluctance Motor Including Eccentricity. teoksessa 2018 23rd International Conference on Electrical Machines, ICEM 2018 (Sivut 2243-2249). IEEE. https://doi.org/10.1109/ICELMACH.2018.8506758

Fedorik, F., Malaska, M., Hannila, R., & Haapala, A. (2015). Improving the thermal performance of concrete-sandwich envelopes in relation to the moisture behaviour of building structures in boreal conditions. Energy and Buildings, 107, 226-233. https://doi.org/10.1016/j.enbuild.2015.08.020

Gao, Q., Linjama, M., Paloniitty, M., & Zhu, Y. (2019). Investigation on positioning control strategy and switching optimization of an equal coded digital valve system. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. https://doi.org/10.1177/0959651819884749

Gashti, E. H. N., Malaska, M., & Kujala, K. (2015). Analysis of thermo-active pile structures and their performance under groundwater flow conditions. Energy and Buildings, 105, 1-8. https://doi.org/10.1016/j.enbuild.2015.07.026

Ghabcheloo, R., & Siddiqui, S. (2018). Complete Odometry Estimation of a Vehicle Using Single Automotive Radar and a Gyroscope. teoksessa MED 2018 - 26th Mediterranean Conference on Control and Automation (Sivut 855-860). [8442474] IEEE. https://doi.org/10.1109/MED.2018.8442474

Gordon, T. R., Paik, T., Klein, D. R., Naik, G. V., Caglayan, H., Boltasseva, A., & Murray, C. B. (2013). Shape-dependent plasmonic response and directed self-assembly in a new semiconductor building block, indium-doped cadmium oxide (ICO). Nano Letters, 13(6), 2857-2863. https://doi.org/10.1021/nl4012003

Gusrialdi, A., Xu, Y., Qu, Z., & Simaan, M. A. (2020). Resilient Cooperative Voltage Control for Distribution Network with High Penetration Distributed Energy Resources. teoksessa European Control Conference 2020, ECC 2020 (Sivut 1533-1539). IEEE.

Haaparanta, A-M., Uppstu, P., Hannula, M., Ellä, V., Rosling, A., & Kellomäki, M. (2015). Improved dimensional stability with bioactive glass fibre skeleton in poly(lactide-co-glycolide) porous scaffolds for tissue engineering. Materials Science and Engineering C: Materials for Biological Applications, 56, 457-466. [5584]. https://doi.org/10.1016/j.msec.2015.07.013

Haiko, O., Miettunen, I., Porter, D., Ojala, N., Ratia, V., Heino, V., & Kemppainen, A. (2017). Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel. Tribologia, 35(1-2), 5-21.

Haiko, O., Heino, V., Porter, D. A., Uusitalo, J., & Kömi, J. (2019). Effect of microstructure on the abrasive wear resistance of steels with hardness 450 HV. Tribologia, 36(1), 54-57. https://doi.org/10.30678/FJT.82443

Hakkarainen, T. V., Schramm, A., Mäkelä, J., Laukkanen, P., & Guina, M. (2015). Lithography-free oxide patterns as templates for self-catalyzed growth of highly uniform GaAs nanowires on Si(111). Nanotechnology, 26(27), [275301]. https://doi.org/10.1088/0957-4484/26/27/275301

Hartikainen, J., Kolari, K., & Kouhia, R. (2016). Development and numerical implementation of an anisotropic continuum damage model for concrete. teoksessa Advances in Fracture and Damage Mechanics XV (Sivut 115-118). (Key Engineering Materials; Vuosikerta 713). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.713.115

Heininen, A., Aaltonen, J., & Koskinen, K. T. (2017). Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle. teoksessa J. Aaltonen, R. Virkkunen, K. T. Koskinen, & R. Kuivanen (Toimittajat), Proceedings of the 2nd Annual SMACC Research Seminar 2017 (Vuosikerta 2, Sivut 53-56). [14] Tampere: Tampere University of Technology.

Hilliaho, K., Köliö, A., Pakkala, T., Lahdensivu, J., & Vinha, J. (2016). Effects of added glazing on Balcony indoor temperatures: Field measurements. Energy and Buildings, 128, 458-472. https://doi.org/10.1016/j.enbuild.2016.07.025

Hintikka, J., Lehtovaara, A., & Mäntylä, A. (2015). Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel. Tribology International, 92, 191-202. https://doi.org/10.1016/j.triboint.2015.06.008

Hintikka, J., Lehtovaara, A., & Mäntylä, A. (2016). Normal displacements in non-Coulomb friction conditions during fretting. Tribology International, 94, 633-639. https://doi.org/10.1016/j.triboint.2015.10.029

Hintikka, J., Lehtovaara, A., & Mäntylä, A. (2017). Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact. TRIBOLOGY TRANSACTIONS, 60(1), 70-78. https://doi.org/10.1080/10402004.2016.1146813

Hintikka, J., Mäntylä, A., Vaara, J., Frondelius, T., & Lehtovaara, A. (2019). Stable and unstable friction in fretting contacts. Tribology International, 131, 73-82. https://doi.org/10.1016/j.triboint.2018.10.014

Hintikka, J., Mäntylä, A., Vaara, J., Frondelius, T., Juoksukangas, J., & Lehtovaara, A. (2019). Running-in in fretting, transition from near-stable friction regime to gross sliding. Tribology International, 143, [106073]. https://doi.org/10.1016/j.triboint.2019.106073

Hokka, M., Östman, K., Rämö, J., & Kuokkala, V. T. (2015). High Temperature Tension HSB Device Based on Direct Electrical Heating. teoksessa B. Song, D. Casem, & J. Kimberley (Toimittajat), Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics (Vuosikerta 65, Sivut 227-233). (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. https://doi.org/10.1007/978-3-319-06995-1_34

Hokka, M., Black, J., Tkalich, D., Fourmeau, M., Kane, A., Hoang, N. H., ... Kuokkala, V-T. (2016). Effects of strain rate and confining pressure on the compressive behavior of Kuru granite. International Journal of Impact Engineering, 91, 183-193. https://doi.org/10.1016/j.ijimpeng.2016.01.010

Hokka, M., Mirow, N., Nagel, H., Vogt, S., & Kuokkala, V-T. (2016). DIC measurements of the human heart during cardiopulmonary bypass surgery. teoksessa Conference Proceedings of the Society for Experimental Mechanics Series (Vuosikerta 6, Sivut 51-59). Springer New York LLC. https://doi.org/10.1007/978-3-319-21455-9_6

Holmberg, K., Kivikytö-Reponen, P., Härkisaari, P., Valtonen, K., & Erdemir, A. (2017). Global energy consumption due to friction and wear in the mining industry. Tribology International, 115, 116-139. https://doi.org/10.1016/j.triboint.2017.05.010

Holopainen, S. (2020). Käyräviivaiset koordinaatistot kontinuumimekaniikassa. Rakenteiden Mekaniikka, 53(2), 53-66. https://doi.org/10.23998/rm.83338

Houaoui, A., Lyyra, I., Agniel, R., Pauthe, E., Massera, J., & Boissière, M. (2019). Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass. Materials Science and Engineering C, 107, [110340]. https://doi.org/10.1016/j.msec.2019.110340

Huova, M., Aalto, A., Linjama, M., Huhtala, K., Lantela, T., & Pietola, M. (2017). Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results. International Journal of Fluid Power, 18(3), 141-152. https://doi.org/10.1080/14399776.2017.1302775

Huttunen-Saarivirta, E., Isotahdon, E., Metsäjoki, J., Salminen, T., Ronkainen, H., & Carpén, L. (2019). Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion. Tribology International, 129, 257-271. https://doi.org/10.1016/j.triboint.2018.08.021

Huttunen-Saarivirta, E., Kilpi, L., Pasanen, A. T., Salminen, T., & Ronkainen, H. (2020). Tribocorrosion behaviour of tin bronze CuSn12 under a sliding motion in NaCl containing environment: Contact to inert vs. reactive counterbody. Tribology International, 151, [106389]. https://doi.org/10.1016/j.triboint.2020.106389

Ihalainen, T. O., Aires, L., Herzog, F. A., Schwartlander, R., Moeller, J., & Vogel, V. (2015). Differential basal-to-apical accessibility of lamin A/C epitopes in the nuclear lamina regulated by changes in cytoskeletal tension. Nature Materials, 14(12), 1252-1261. https://doi.org/10.1038/nmat4389

Isotahdon, E., Huttunen-Saarivirta, E., Heinonen, S., Kuokkala, V. T., & Paju, M. (2015). Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid. Journal of Alloys and Compounds, 626, 349-359. https://doi.org/10.1016/j.jallcom.2014.12.048

Isotahdon, E., Huttunen-Saarivirta, E., & Kuokkala, V. (2017). Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets. Journal of Alloys and Compounds, 692, 190-197. https://doi.org/10.1016/j.jallcom.2016.09.058

Itävuo, P., Hulthén, E., & Vilkko, M. (2017). Feed-hopper level estimation and control in cone crushers. Minerals Engineering, 110, 82-95. https://doi.org/10.1016/j.mineng.2017.04.010

Itävuo, P., Hulthén, E., Yahyaei, M., & Vilkko, M. (2019). Mass balance control of crushing circuits. Minerals Engineering, 135, 37-47. https://doi.org/10.1016/j.mineng.2019.02.033

Janka, L., Norpoth, J., Eicher, S., Rodríguez Ripoll, M., & Vuoristo, P. (2016). Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment. Materials and Design, 98, 135-142. https://doi.org/10.1016/j.matdes.2016.03.007

Järvinen, H., Isakov, M., Nyyssönen, T., Järvenpää, M., & Peura, P. (2016). The effect of initial microstructure on the final properties of press hardened 22MnB5 steels. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 676, 109-120. https://doi.org/10.1016/j.msea.2016.08.096

Jaurola, M., Hedin, A., Tikkanen, S., & Huhtala, K. (2018). TOpti: a flexible framework for optimising energy management for various ship machinery topologies. Journal of Marine Science and Technology (Japan). https://doi.org/10.1007/s00773-018-0617-4

Jaurola, M., Hedin, A., Tikkanen, S., & Huhtala, K. (2019). A TOpti simulation for finding fuel saving by optimising propulsion control and power management. Journal of Marine Science and Technology (Japan). https://doi.org/10.1007/s00773-019-00651-2

Javaheri, V., Nyyssönen, T., Grande, B., & Porter, D. (2018). Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium. Journal of Materials Engineering and Performance, 27(6), 2978-2992. https://doi.org/10.1007/s11665-018-3376-9

Jowett, G. M., Norman, M. D. A., Yu, T. T. L., Rosell Arévalo, P., Hoogland, D., Lust, S. T., ... Gentleman, E. (2020). ILC1 drive intestinal epithelial and matrix remodelling. Nature Materials. https://doi.org/10.1038/s41563-020-0783-8

Juoksukangas, J., Lehtovaara, A., & Mäntylä, A. (2016). A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact. Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 230(10), 1273-1287. https://doi.org/10.1177/1350650116633573

Juoksukangas, J., Lehtovaara, A., & Mäntylä, A. (2016). Experimental and numerical investigation of fretting fatigue behavior in bolted joints. Tribology International, 103, 440-448. https://doi.org/10.1016/j.triboint.2016.07.021

Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., ... Frondelius, T. (2019). Characterization of cracks formed in large flat-on-flat fretting contact. International Journal of Fatigue, 124, 361-370. https://doi.org/10.1016/j.ijfatigue.2019.03.004

Juoksukangas, J., Hintikka, J., Lehtovaara, A., Mäntylä, A., Vaara, J., & Frondelius, T. (2020). Avoiding the high friction peak in fretting contact. Rakenteiden Mekaniikka, 53(1), 12-19. https://doi.org/10.23998/rm.76266

Kanerva, U., Karhu, M., Lagerbom, J., Kronlöf, A., Honkanen, M., Turunen, E., & Laitinen, T. (2016). Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis. International Journal of Refractory Metals and Hard Materials, 56, 69-75. https://doi.org/10.1016/j.ijrmhm.2015.11.014

Kezilebieke, S., Žitko, R., Dvorak, M., Ojanen, T., & Liljeroth, P. (2019). Observation of Coexistence of Yu-Shiba-Rusinov States and Spin-Flip Excitations. Nano Letters, 19(7), 4614-4619. https://doi.org/10.1021/acs.nanolett.9b01583

Kivelä, T., Mattila, J., Puura, J., & Launis, S. (2017). Redundant robotic manipulator path planning for real-time obstacle and self-collision avoidance. teoksessa C. Ferraresi, & G. Quaglia (Toimittajat), Advances in Service and Industrial Robotics: Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017 (Sivut 208-216). (Mechanisms and Machine Science; Vuosikerta 49). Springer International Publishing. https://doi.org/10.1007/978-3-319-61276-8_24

Kivioja, H., & Vinha, J. (2020). Hot-box measurements to investigate the internal convection of highly insulated loose-fill insulation roof structures. Energy and Buildings, 216, [109934]. https://doi.org/10.1016/j.enbuild.2020.109934

Koivikko, A., & Sariola, V. (2019). Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds. teoksessa 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft) (Sivut 509-513). IEEE. https://doi.org/10.1109/ROBOSOFT.2019.8722741

Koivuluoto, H., Milanti, A., Bolelli, G., Latokartano, J., Marra, F., Pulci, G., ... Vuoristo, P. (2017). Structures and properties of laser-assisted cold-sprayed aluminum coatings. teoksessa THERMEC 2016 (Vuosikerta 879, Sivut 984-989). (Materials Science Forum; Vuosikerta 879). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.879.984

Koivumäki, J., & Mattila, J. (2017). Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps. Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME, 139(10), [101008]. https://doi.org/10.1115/1.4036537

Koivusalo, L., Karvinen, J., Sorsa, E., Jönkkäri, I., Väliaho, J., Kallio, P., ... Kellomäki, M. (2018). Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects. Materials Science and Engineering C, 85, 68-78. https://doi.org/10.1016/j.msec.2017.12.013

Korkiakoski, S., Brøndsted, P., Sarlin, E., & Saarela, O. (2016). Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates. International Journal of Fatigue, 85, 114-129. https://doi.org/10.1016/j.ijfatigue.2015.12.008

Kouhia, R., Tůma, M., Mäkinen, J., Fedoroff, A., & Marjamäki, H. (2012). Implementation of a direct procedure for critical point computations using preconditioned iterative solvers. Computers & Structures, 108-109, 110-117. https://doi.org/10.1016/j.compstruc.2012.02.009

Kravchenko, A., Shevchenko, A., Ovchinnikov, V., Priimagi, A., & Kaivola, M. (2011). Optical interference lithography using azobenzene-functionalized polymers for micro-and nanopatterning of silicon. Advanced Materials, 23(36), 4174-4177. https://doi.org/10.1002/adma.201101888

Kreutzer, J., Viehrig, M., Maki, A-J., Kallio, P., Rahikainen, R., & Hytönen, V. (2017). Pneumatically actuated elastomeric device for simultaneous mechanobiological studies & live-cell fluorescent microscopy. teoksessa International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings IEEE. https://doi.org/10.1109/MARSS.2017.8001929

Kreutzer, J., Viehrig, M., Pölönen, R. P., Zhao, F., Ojala, M., Aalto-Setälä, K., & Kallio, P. (2019). Pneumatic unidirectional cell stretching device for mechanobiological studies of cardiomyocytes. BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. https://doi.org/10.1007/s10237-019-01211-8

Krogerus, T., Hyvönen, M., & Huhtala, K. (2018). Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors. Fuel, 216, 1-9. https://doi.org/10.1016/j.fuel.2017.11.152

Kurnitski, J., Saari, A., Kalamees, T., Vuolle, M., Niemelä, J., & Tark, T. (2011). Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with REHVA definition for nZEB national implementation. Energy and Buildings, 43(11), 3279-3288. https://doi.org/10.1016/j.enbuild.2011.08.033

Kuusipalo, J., & Lahti, J. (2017). Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland. teoksessa 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017 (Vuosikerta May-2017). TAPPI Press.

Kuzmin, M., Laukkanen, P., Mäkelä, J., Yasir, M., Tuominen, M., Dahl, J., ... Guina, M. (2016). Toward the Atomically Abrupt Interfaces of SiOx/Semiconductor Junctions. Advanced Materials Interfaces, 3(11), [1500510]. https://doi.org/10.1002/admi.201500510

Laakkonen, P., & Quadrat, A. (2017). A fractional representation approach to the robust regulation problem for SISO systems. Systems and Control Letters, 103, 32-37. https://doi.org/10.1016/j.sysconle.2017.02.006

Lahti, J., Johansson, P., Lahtinen, K., Cameron, D. C., & Seppänen, T. (2014). Improving the effect of nanoscale barrier coating on BOPP film properties: Influence of substrate contamination, web handling and pretreatments. teoksessa TAPPI PLACE Conference 2014 (Vuosikerta 2, Sivut 1039-1061). TAPPI Press.

Lahti, J. (2016). Nanoscale barrier coating on BOPP packaging film by ALD. teoksessa TAPPI PLACE Conference 2016: Exploring New Frontiers (Sivut 493-505). TAPPI Press.

Lahti, J., Tuominen, M., Penttinen, T., Räsänen, J. P., & Kuusipalo, J. (2009). The effects of corona and flame treatment: Part 2. PE-HD and PP coated papers. teoksessa TAPPI Press - 12th European PLACE Conference 2009 (Vuosikerta 1, Sivut 278-314)

Lahti, J., Kuusipalo, J., & Auvinen, S. (2017). Novel equipment to simulate hot air heat sealability of packaging materials. teoksessa 16th TAPPI European PLACE Conference 2017 (Sivut 237-248). TAPPI Press.

Lahti, J., Kamppuri, T., & Kuusipalo, J. (2017). Novel bio-based materials for active and intelligent packaging. teoksessa 16th TAPPI European PLACE Conference 2017 TAPPI Press.

Lahti, J. (2019). Nanocellulose and Polylactic Acid Based Multilayer Coatings for Barrier Applications. teoksessa 17th Biennial TAPPI European PLACE Conference 2019 (Sivut 446-455). TAPPI Press.

Lahti, J. (2019). Market implementation of active and intelligent packaging-opportunities from a socio-economic perspective. teoksessa 17th Biennial TAPPI European PLACE Conference 2019 (Sivut 419-427). TAPPI Press.

Lahtinen, K., & Kuusipalo, J. (2008). Statistical modeling of water vapor transmission rates for extrusion-coated papers. teoksessa TAPPI 2008 PLACE Conference: Innovations in Flexible Consumer Packaging

Lahtinen, K., Lahti, J., Johansson, P., Seppänen, T., & Cameron, D. C. (2013). Improving the effect of a nanoscale barrier coating on BOPP film properties by surface pretreatments. teoksessa 14th European PLACE Conference 2013 (Vuosikerta 1, Sivut 469-493). TAPPI Press.

Lanz, M., & Tuokko, R. (2017). Concepts, methods and tools for individualized production. PRODUCTION ENGINEERING, 11(2), 205-212. https://doi.org/10.1007/s11740-017-0728-5

Lappalainen, K., Wang, G. C., & Kleissl, J. (2020). Estimation of the largest expected photovoltaic power ramp rates. Applied Energy, 278, [115636]. https://doi.org/10.1016/j.apenergy.2020.115636

Lauri, M., Pajarinen, J., Peters, J., & Frintrop, S. (2020). Multi-sensor next-best-view planning as matroid-constrained submodular maximization. IEEE Robotics and Automation Letters, 5(4), 5323-5330. https://doi.org/10.1109/LRA.2020.3007445

Laurila, M. M., Khorramdel, B., Dastpak, A., & Mäntysalo, M. (2017). Statistical analysis of E-jet print parameter effects on Ag-nanoparticle ink droplet size. Journal of Micromechanics and Microengineering, 27(9), [095005]. https://doi.org/10.1088/1361-6439/aa7a71

Layek, R. K., Uddin, M. E., Kim, N. H., Tak Lau, A. K., & Lee, J. H. (2017). Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic. Composites Part B : Engineering, 128, 155-163. https://doi.org/10.1016/j.compositesb.2017.07.010

Le, T., Lin, Z., Wong, C. P., & Tentzeris, M. M. (2015). Smart Skins: Could they be the ultimate sensing tool? Today\uFFFDs industry and personal medical care both strongly demand accurate, reliable, robust, lo. IEEE Nanotechnology Magazine, 9(2), 4-10. [7080864]. https://doi.org/10.1109/MNANO.2015.2410474

Lehmusto, J., Olin, M., Viljanen, J., Kalliokoski, J., Mylläri, F., Toivonen, J., ... Hupa, L. (2019). Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF. Materials and Corrosion. https://doi.org/10.1002/maco.201910964

Lemougna, P. N., Yliniemi, J., Ismailov, A., Levänen, E., Tanskanen, P., Kinnunen, P., ... Illikainen, M. (Hyväksytty/painossa). Spodumene tailings for porcelain and structural materials: Effect of temperature (1050–1200 °C) on the sintering and properties. Minerals Engineering, [105843]. https://doi.org/10.1016/j.mineng.2019.105843

Liikanen, H., Aref, M. M., & Mattila, J. (2019). M-Estimator Application in Real-Time Sensor Fusion for Smooth Position Feedback of Heavy-Duty Field Robots. teoksessa Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Automation and Mechatronics (RAM) (Sivut 368-373). (IEEE International Conference on Cybernetics and Intelligent Systems). IEEE. https://doi.org/10.1109/CIS-RAM47153.2019.9095821

Liimatainen, V., Sariola, V., & Zhou, Q. (2013). Controlling liquid spreading using microfabricated undercut edges. Advanced Materials, 25(16), 2275-2278. https://doi.org/10.1002/adma.201204696

Liimatainen, H., van Vliet, O., & Aplyn, D. (2019). The potential of electric trucks – An international commodity-level analysis. Applied Energy, 236, 804-814. https://doi.org/10.1016/j.apenergy.2018.12.017

Lindgren, M., Santa-aho, S., & Vippola, M. (2016). Barkhausen noise response of three different welded duplex stainless steels. Insight, 58(9), 480-486. https://doi.org/10.1784/insi.2016.58.9.480

Lindroos, M., Apostol, M., Kuokkala, V. T., Laukkanen, A., Valtonen, K., Holmberg, K., & Oja, O. (2015). Experimental study on the behavior of wear resistant steels under high velocity single particle impacts. International Journal of Impact Engineering, 78, 114-127. https://doi.org/10.1016/j.ijimpeng.2014.12.002

Lindroos, M., Apostol, M., Heino, V., Valtonen, K., Laukkanen, A., Holmberg, K., & Kuokkala, V. T. (2015). The deformation, strain hardening, and wear behavior of chromium-alloyed hadfield steel in abrasive and impact conditions. Tribology Letters, 57(3), [24]. https://doi.org/10.1007/s11249-015-0477-6

Lindroos, M., Laukkanen, A., Cailletaud, G., & Kuokkala, V-T. (2017). On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains. International Journal of Solids and Structures, 125, 68-76. https://doi.org/10.1016/j.ijsolstr.2017.07.015

Linjama, M. (2019). Variable speed digital hydraulic transformer–based servo drive. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. https://doi.org/10.1177/0959651819869145

Linjama, M. (2019). Variable speed drive with hydraulic boost. International Journal of Fluid Power, 20(1), 99-123. https://doi.org/10.13052/ijfp1439-9776.2014

Linjamaa, A., Lehtovaara, A., Kallio, M., & Léger, A. (2019). Running-in effects on friction of journal bearings under slow sliding speeds. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. https://doi.org/10.1177/1350650119864758

Linko, V., Leppiniemi, J., Paasonen, S. T., Hytönen, V. P., & Jussi Toppari, J. (2011). Defined-size DNA triple crossover construct for molecular electronics: Modification, positioning and conductance properties. Nanotechnology, 22(27), [275610]. https://doi.org/10.1088/0957-4484/22/27/275610

Lisjak, D., Lintunen, P., Hujanen, A., Varis, T., Bolelli, G., Lusvarghi, L., ... Drofenik, M. (2011). Hexaferrite/polyethylene Composite coatings prepared with flame spraying. Materials Letters, 65(3), 534-536. https://doi.org/10.1016/j.matlet.2010.10.076

Lorimer, G. W., Dicken, R., Peura, P., Pilkington, R., Younes, C. M., Allen, G. C., & Holt, M. J. (1996). The effect of phosphorous and arsenic on the fracture behaviour of a 2,25% Cr-1% Mo Steel. Materials Science Forum, 207-209(PART 2), 645-648.

Luna, E., Wu, M., Hanke, M., Puustinen, J., Guina, M., & Trampert, A. (2016). Spontaneous formation of three-dimensionally ordered Bi-rich nanostructures within GaAs1-xBix/GaAs quantum wells. Nanotechnology, 27(32), [325603]. https://doi.org/10.1088/0957-4484/27/32/325603

Mäenpää, P., Aref, M. M., & Mattila, J. (2019). FORMI: A Fast Holonomic Path Planning and Obstacle Representation Method Based on Interval Analysis. teoksessa Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019 (Sivut 398-403). (IEEE International Conference on Cybernetics and Intelligent Systems). IEEE. https://doi.org/10.1109/CIS-RAM47153.2019.9095822

Magliulo, M., Mallardi, A., Mulla, M. Y., Cotrone, S., Pistillo, B. R., Favia, P., ... Torsi, L. (2013). Electrolyte-gated organic field-effect transistor sensors based on supported biotinylated phospholipid bilayer. Advanced Materials, 25(14), 2090-2094. https://doi.org/10.1002/adma.201203587

Mahmoodpour, M., Lobov, A., Lanz, M., Mäkelä, P., & Rundas, N. (2018). Role-based visualization of industrial IoT-based systems. teoksessa 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018 [8449183] IEEE. https://doi.org/10.1109/MESA.2018.8449183

Mäkelä, J. M., Haapanen, J., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., ... Kuusipalo, J. (2015). Roll-to-roll coating by liquid flame spray nanoparticle deposition. teoksessa Materials Research Society Symposium Proceedings (Vuosikerta 1747, Sivut 37-42). MATERIALS RESEARCH SOCIETY. https://doi.org/10.1557/opl.2015.530

Mäkinen, J., Fränti, K., Korhonen, M., Fillion, J., & Heinisuo, M. (2016). End-plate connections in Bi-axial bending - Measurements. teoksessa F. M. Mazzolani, A. Squillace, B. Faggiano, & F. Bellucci (Toimittajat), 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016 (Vuosikerta 710, Sivut 275-280). (Key Engineering Materials; Vuosikerta 710). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.710.275

Mäkinen, P., Mononen, T., & Mattila, J. (2018). Inertial Sensor-Based State Estimation of Flexible Links Subject to Bending and Torsion. teoksessa 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018 [8449188] IEEE. https://doi.org/10.1109/MESA.2018.8449188

Malas, A., Das, C. K., Das, A., & Heinrich, G. (2012). Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties. Materials and Design, 39, 410-417. https://doi.org/10.1016/j.matdes.2012.03.007

Mäntylä, A., Hintikka, J., Frondelius, T., Vaara, J., Lehtovaara, A., & Juoksukangas, J. (2019). Prediction of contact condition and surface damage by simulating variable friction coefficient and wear. Tribology International, [106054]. https://doi.org/10.1016/j.triboint.2019.106054

Mäntylä, A., Juoksukangas, J., Hintikka, J., Frondelius, T., & Lehtovaara, A. (2020). FEM-based wear simulation for fretting contacts. Rakenteiden Mekaniikka, 53(1), 20-27. https://doi.org/10.23998/rm.76261

Mäntyranta, A., Heino, V., Isotahdon, E., Salminen, T., & Huttunen-Saarivirta, E. (2019). Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution. Tribology International, 138, 250-262. https://doi.org/10.1016/j.triboint.2019.05.032

Martinez, F., Neculqueo, G., Vasquez, S. O., Lemmetyinen, H., Efimov, A., & Vivo, P. (2015). Branched thiophene oligomer/polymer bulk heterojunction organic solar cell. teoksessa Materials Research Society Symposium Proceedings (Vuosikerta 1737, Sivut 19-25). MATERIALS RESEARCH SOCIETY. https://doi.org/10.1557/opl.2015.529

Mashayekhi, M., Winchester, L., Laurila, M-M., Mäntysalo, M., Ogier, S., Terés, L., & Carrabina, J. (2017). Chip-by-chip configurable interconnection using digital printing techniques. Journal of Micromechanics and Microengineering, 27(4), [045009]. https://doi.org/10.1088/1361-6439/aa5ef3

Matikainen, V., Rubio Peregrina, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdková, & Vuoristo, P. (2019). Slurry and dry particle erosion wear properties of WC-10Co4Cr and Cr3C2-25NiCr hardmetal coatings deposited by HVOF and HVAF spray processes. Tribologia, 36(1-2), 58-61. https://doi.org/10.30678/FJT.83590

Medyna, G., Coatanea, E., & Millet, D. (2011). Evaluation of parts of a boat cabin based on exergy - Focusing on environmental and economic assessments. teoksessa ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (PARTS A AND B toim., Vuosikerta 4, Sivut 1083-1092). AMER SOC MECHANICAL ENGINEERS.

Mendes, M. R., Subramaniyam, N. P., & Wendel-Mitoraj, K. (2015). Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes. teoksessa International IEEE/EMBS Conference on Neural Engineering, NER (Vuosikerta 2015-July, Sivut 1092-1095). IEEE COMPUTER SOCIETY PRESS. https://doi.org/10.1109/NER.2015.7146818

Mettänen, M., & Hirn, U. (2015). A comparison of five optical surface topography measurement methods. TAPPI Journal, 14(1), 27-38.

Mikkonen, A., & Karvinen, R. (2016). Solar Panel Breakage During Heavy Rain Caused by Thermal Stress. teoksessa Engineered Transparency 2016: Glass in Architechture and Structural Engineering Wiley.

Mikkonen, A., & Karvinen, R. (2017). Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production. teoksessa IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)

Mishra, A., Petit, L., Pihl, M., Andersson, M., Salminen, T., Rocherullé, J., & Massera, J. (2017). Thermal, structural and in vitro dissolution of antimicrobial copper-doped and slow resorbable iron-doped phosphate glasses. Journal of Materials Science, 52(15), 8957–8972. https://doi.org/10.1007/s10853-017-0805-3

Mohammed, W. M., Ramis Ferrer, B., Iarovyi, S., Negri, E., Fumagalli, L., Lobov, A., & Martinez Lastra, J. L. (2018). Generic platform for manufacturing execution system functions in knowledge-driven manufacturing systems. International Journal of Computer Integrated Manufacturing, 1-13. https://doi.org/10.1080/0951192X.2017.1407874

Mokammel, F., Coatanea, E., Christophe, F., Ba Khouya, M., & Medyna, G. (2013). Towards an approach for evaluating the quality of requirements. teoksessa 33rd Computers and Information in Engineering Conference (Vuosikerta 2 B). [V02BT02A024] American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2013-13708

Motlagh, H. D. K., Lotfi, F., Taghirad, H. D., & Germi, S. B. (2019). Position Estimation for Drones based on Visual SLAM and IMU in GPS-denied Environment. teoksessa ICRoM 2019 - 7th International Conference on Robotics and Mechatronics (Sivut 120-124). IEEE. https://doi.org/10.1109/ICRoM48714.2019.9071826

Netzev, M., Angleraud, A., & Pieters, R. (2020). Soft robotic gripper with compliant cell stacks for industrial part handling. IEEE Robotics and Automation Letters, 5(4), 6821-6828. https://doi.org/10.1109/LRA.2020.3020546

Niemelä-Anttonen, H., Koivuluoto, H., Tuominen, M., Teisala, H., Juuti, P., Haapanen, J., ... Vuoristo, P. (2018). Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles. Advanced Materials Interfaces, 5(20). https://doi.org/10.1002/admi.201800828

Nommeots-Nomm, A., Boetti, N. G., Salminen, T., Massera, J., Hokka, M., & Petit, L. (2018). Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds, 751, 224-230. https://doi.org/10.1016/j.jallcom.2018.04.101

Nommeots-Nomm, A., Houaoui, A., Pradeepan Packiyanathar, A., Chen, X., Hokka, M., Hill, R., ... Massera, J. (2020). Phosphate/oxyfluorophosphate glass crystallization and its impact on dissolution and cytotoxicity. Materials Science and Engineering C, 117, [111269]. https://doi.org/10.1016/j.msec.2020.111269

Nurmi, V., Hintikka, J., Juoksukangas, J., Honkanen, M., Vippola, M., Lehtovaara, A., ... Frondelius, T. (2019). The formation and characterization of fretting-induced degradation layers using quenched and tempered steel. Tribology International, 131, 258-267. https://doi.org/10.1016/j.triboint.2018.09.012

Olin, M., & Dal Maso, M. (2020). CFD modeling the diffusional losses of nanocluster-sized particles and condensing vapors in 90° bends of circular tubes. Journal of Aerosol Science, 150, [105618]. https://doi.org/10.1016/j.jaerosci.2020.105618

Oluoti, K., Doddapaneni, T. R. K. C., & Richards, T. (2018). Investigating the kinetics and biofuel properties of Alstonia congensis and Ceiba pentandra via torrefaction. Energy, 150, 134-141. https://doi.org/10.1016/j.energy.2018.02.086

Ottosen, N. S., Ristinmaa, M., & Kouhia, R. (2018). Enhanced multiaxial fatigue criterion that considers stress gradient effects. International Journal of Fatigue, 116, 128-139. https://doi.org/10.1016/j.ijfatigue.2018.05.024

Pajarinen, J., Arenz, O., Peters, J., & Neumann, G. (2020). Probabilistic approach to physical object disentangling. IEEE Robotics and Automation Letters, 5(4), 5510-5517. https://doi.org/10.1109/LRA.2020.3006789

Palagi, S., Mark, A. G., Melde, K., Qiu, T., Zeng, H., Parmeggiani, C., ... Fischer, P. (2017). Locomotion of light-driven soft microrobots through a hydrogel via local melting. teoksessa International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings IEEE. https://doi.org/10.1109/MARSS.2017.8001916

Palazzo, G., De Tullio, D., Magliulo, M., Mallardi, A., Intranuovo, F., Mulla, M. Y., ... Torsi, L. (2015). Detection beyond Debye's length with an electrolyte-gated organic field-effect transistor. Advanced Materials, 27(5), 911-916. https://doi.org/10.1002/adma.201403541

Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M., & Ituarte, I. F. (2016). Comparative environmental impacts of additive and subtractive manufacturing technologies. CIRP Annals: Manufacturing Technology, 65(1), 29-32. https://doi.org/10.1016/j.cirp.2016.04.036

Paunonen, L., & Seifert, D. (2020). Asymptotics and approximation of large systems of ordinary differential equations. Systems and Control Letters, 140, [104703]. https://doi.org/10.1016/j.sysconle.2020.104703

Pekkanen, T. T., Timonen, R. S., Lendvay, G., Rissanen, M. P., & Eskola, A. J. (2019). Kinetics and thermochemistry of the reaction of 3-methylpropargyl radical with molecular oxygen. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 37(1), 299-306. https://doi.org/10.1016/j.proci.2018.05.050

Perttula, A., Nguyen, N., Collin, J., & Jokinen, J-P. (2019). Vehicle type detection and passenger satisfaction analysis using smartphone sensors and digital surveys. IET Intelligent Transport Systems, 13(10), 1499-1506. https://doi.org/10.1049/iet-its.2018.5349

Philippi, P. C., Siebert, D. N., Hegele, L. A., & Mattila, K. K. (2016). High-order lattice-Boltzmann. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38(5), 1401-1419. https://doi.org/10.1007/s40430-015-0441-2

Pirjola, L., Kuuluvainen, H., Timonen, H., Saarikoski, S., Teinilä, K., Salo, L., ... Rönkkö, T. (2019). Potential of renewable fuel to reduce diesel exhaust particle emissions. Applied Energy, 254, [113636]. https://doi.org/10.1016/j.apenergy.2019.113636

Priimägi, A., & Hecht, S. (Toimittajat) (2020). From Responsive Molecules to Interactive Materials. Advanced Materials, 32(20), [2000215]. https://doi.org/10.1002/adma.202000215

Priimägi, A., & Hecht, S. (Toimittajat) (2020). Special Issue: From Responsive Materials to Interactive Materials. Advanced Materials, 32(20).

Pylkkänen, K., Nurmikolu, A., Guthrie, W. S., & Argyle, H. M. (2015). Measurements and Modeling of Frost Depth in Railway Tracks. teoksessa Proceedings of the International Conference on Cold Regions Engineering: 16th International Conference on Cold Regions Engineering 2015 (Sivut 123-134). American Society of Civil Engineers ASCE. https://doi.org/10.1061/9780784479315.012

Pyrhönen, V-P., Koivisto, H., & Vilkko, M. (2017). A Reduced-Order Two-Degree-of-Freedom Composite Nonlinear Feedback Control for a Rotary DC Servo Motor. teoksessa Proceedings of the 56th IEEE Conference on Decision and Control (Sivut 2065-2071). Melbourne, Australia. https://doi.org/10.1109/CDC.2017.8263951

Rasappa, S., Borah, D., Faulkner, C. C., Lutz, T., Shaw, M. T., Holmes, J. D., & Morris, M. A. (2013). Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography. Nanotechnology, 24(6), [065503]. https://doi.org/10.1088/0957-4484/24/6/065503

Rasilo, P., Belahcen, A., & Arkkio, A. (2012). Effect of rotor pole-shoe construction on losses of inverter-fed synchronous motors. teoksessa Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012 (Sivut 1282-1286) https://doi.org/10.1109/ICElMach.2012.6350042

Ratia, V., Rojacz, H., Terva, J., Valtonen, K., Badisch, E., & Kuokkala, V. T. (2015). Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels. Tribology Letters, 57(2), [15]. https://doi.org/10.1007/s11249-014-0460-7

Reshef, O., Saad-Bin-Alam, M., Huttunen, M. J., Carlow, G., Sullivan, B. T., Ménard, J. M., ... Boyd, R. W. (2019). Multiresonant High-Q Plasmonic Metasurfaces. Nano Letters, 19(9), 6429-6434. https://doi.org/10.1021/acs.nanolett.9b02638

Rodríguez Ripoll, M., Ojala, N., Katsich, C., Totolin, V., Tomastik, C., & Hradil, K. (2016). The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings. Materials and Design, 99, 509-520. https://doi.org/10.1016/j.matdes.2016.03.081

Roldán Del Cerro, P., Salminen, T., Lastusaari, M., & Petit, L. (2018). Persistent luminescent borosilicate glasses using direct particles doping method. Scripta Materialia, 151, 38-41. https://doi.org/10.1016/j.scriptamat.2018.03.034

Ronkainen, H., Kanerva, U., Varis, T., Ruusuvuori, K., Turunen, E., Peräntie, J., ... Jantunen, H. (2013). Materials for electronics by thermal spraying. teoksessa Physical and Numerical Simulation of Materials Processing VII (Vuosikerta 762, Sivut 451-456). (Materials Science Forum; Vuosikerta 762). https://doi.org/10.4028/www.scientific.net/MSF.762.451

Rossi, M., Liegmann, E., Karamanakos, P., Castelli-Dezza, F., & Kennel, R. (2019). Direct model predictive power control of a series-connected modular rectifier. teoksessa PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (Sivut 1-6). IEEE. https://doi.org/10.1109/PRECEDE.2019.8753318

Ryynänen, T., Mzezewa, R., Meriläinen, E., Hyvärinen, T., Lekkala, J., Narkilahti, S., & Kallio, P. (2020). Transparent microelectrode arrays fabricated by ion beam assisted deposition for neuronal cell in vitro recordings. Micromachines, 11(5), [497]. https://doi.org/10.3390/MI11050497

Saarimaa, V., Fuertes, N., Persson, D., Zavalis, T., Kaleva, A., Nikkanen, J-P., ... Heydari, G. (2020). Assessment of pitting corrosion in bare and passivated (wet scCO2-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS). Materials and Corrosion. https://doi.org/10.1002/maco.202011653

Saintsing, C. D., Cook, B. S., & Tentzeris, M. M. (2014). An origami inspired reconfigurable spiral antenna. teoksessa 38th Mechanisms and Robotics Conference (Vuosikerta 5B). The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201435353

Sajna, M. S., Perumbilavil, S., Prakashan, V. P., Sanu, M. S., Joseph, C., Biju, P. R., & Unnikrishnan, N. V. (2018). Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses. Materials Research Bulletin, 104, 227-235. https://doi.org/10.1016/j.materresbull.2018.04.026

Sanchez-Guevara, C., Núñez Peiró, M., Taylor, J., Mavrogianni, A., & Neila González, J. (2019). Assessing population vulnerability towards summer energy poverty: Case studies of Madrid and London. Energy and Buildings, 190, 132-143. https://doi.org/10.1016/j.enbuild.2019.02.024

Santa-aho, S., Laitinen, A., Sorsa, A., & Vippola, M. (2019). Barkhausen Noise Probes and Modelling: A Review. Journal of Nondestructive Evaluation, 38(4), [94]. https://doi.org/10.1007/s10921-019-0636-z

Sariola, V., & Sitti, M. (2014). Mechanically Switchable Elastomeric Microfibrillar Adhesive Surfaces for Transfer Printing. Advanced Materials Interfaces, 1(4), [1300159]. https://doi.org/10.1002/admi.201300159

Sautter, J. D., Xu, L., Miroshnichenko, A. E., Lysevych, M., Volkovskaya, I., Smirnova, D. A., ... Rahmani, M. (2019). Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas. Nano Letters, 19(6), 3905-3911. https://doi.org/10.1021/acs.nanolett.9b01112

Schoeppner, R. L., Mohanty, G., Polyakov, M. N., Petho, L., Maeder, X., & Michler, J. (2020). An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films. Materials and Design, 195, [108907]. https://doi.org/10.1016/j.matdes.2020.108907

Seidt, J. D., Kuokkala, V-T., Smith, J. L., & Gilat, A. (2017). Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates. Experimental Mechanics, 57(2), 219–229. https://doi.org/10.1007/s11340-016-0237-z

Sekki, T., Andelin, M., Airaksinen, M., & Saari, A. (2016). Consideration of energy consumption, energy costs, and space occupancy in Finnish daycare centres and school buildings. Energy and Buildings, 129, 199-206. https://doi.org/10.1016/j.enbuild.2016.08.015

Sekki, T., Airaksinen, M., & Saari, A. (2015). Impact of building usage and occupancy on energy consumption in Finnish daycare and school buildings. Energy and Buildings, 105, 247-257. https://doi.org/10.1016/j.enbuild.2015.07.036

Sekki, T., Airaksinen, M., & Saari, A. (2015). Measured energy consumption of educational buildings in a Finnish city. Energy and Buildings, 87, 105-115. https://doi.org/10.1016/j.enbuild.2014.11.032

Sekki, T., Airaksinen, M., & Saari, A. (2017). Effect of energy measures on the values of energy efficiency indicators in Finnish daycare and school buildings. Energy and Buildings, 139, 124-132. https://doi.org/10.1016/j.enbuild.2017.01.005

Seppälä, J., & Salmenperä, M. (2015). Towards dependable automation. teoksessa Cyber Security: Analytics, Technology and Automation: Part IV (Sivut 229-249). (Intelligent Systems, Control and Automation: Science and Engineering; Vuosikerta 78). Springer International Publishing. https://doi.org/10.1007/978-3-319-18302-2_15

Shevkunov, I., Katkovnik, V., Claus, D., Pedrini, G., Petrov, N. V., & Egiazarian, K. (2020). Hyperspectral phase imaging based on denoising in complex-valued eigensubspace. Optics and Lasers in Engineering, 127, [105973]. https://doi.org/10.1016/j.optlaseng.2019.105973

Singh, A. K., Ahonen, A., Ghabcheloo, R., & Mueller, A. (2020). Introducing Multi-Convexity in Path Constrained Trajectory Optimization for Mobile Manipulators. teoksessa European Control Conference 2020, ECC 2020 (Sivut 1178-1185). IEEE.

Sippola, P., Kolehmainen, J., Ozel, A., Liu, X., Saarenrinne, P., & Sundaresan, S. (2018). Experimental and numerical study of wall layer development in a tribocharged fluidized bed. Journal of Fluid Mechanics, 849, 860-884. https://doi.org/10.1017/jfm.2018.412

Soltani, A., Curtze, S., Lahti, J., Järvelä, K., Laurikka, J., Hokka, M., & Kuokkala, V. T. (2018). Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery. teoksessa Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics (Vuosikerta 4, Sivut 19-27). (Conference Proceedings of the Society for Experimental Mechanics). Springer New York LLC. https://doi.org/10.1007/978-3-319-63552-1_4

Stoykova, E., Berberova, N., Kim, Y., Nazarova, D., Ivanov, B., Gotchev, A., ... Kang, H. (2017). Dynamic speckle analysis with smoothed intensity-based activity maps. Optics and Lasers in Engineering, 93, 55-65. https://doi.org/10.1016/j.optlaseng.2017.01.012

Subramaniam, K., Das, A., & Heinrich, G. (2012). Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide. KGK: KAUTSCHUK GUMMI KUNSTSTOFFE, 65(7-8), 44-46.

Subramaniyam, N. P., Hyttinen, J., Hatsopoulos, N. G., & Takahashi, K. (2015). Recurrence network analysis of wide band oscillations of local field potentials from the primary motor cortex reveals rich dynamics. teoksessa International IEEE/EMBS Conference on Neural Engineering, NER (Sivut 960-963). IEEE COMPUTER SOCIETY PRESS. https://doi.org/10.1109/NER.2015.7146785

Suokas, E. (2017). Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating. teoksessa 16th TAPPI European PLACE Conference 2017 (Sivut 529-544). TAPPI Press.

Suokas, E. (2019). Effect of polyolefin molecular structure on product properties in extrusion coating. teoksessa 17th Biennial TAPPI European PLACE Conference 2019 (Sivut 89-98). TAPPI Press.

Šutka, A., Käämbre, T., Joost, U., Kooser, K., Kook, M., Duarte, R. F., ... Smits, K. (2018). Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals. Journal of Alloys and Compounds, 763, 164-172. https://doi.org/10.1016/j.jallcom.2018.05.036

Syrjärinne, P., Nummenmaa, J., Thanisch, P., Kerminen, R., & Hakulinen, E. (2015). Analysing traffic fluency from bus data. IET Intelligent Transport Systems, 9(6), 566-572. https://doi.org/10.1049/iet-its.2014.0192

Szczodra, A., Mardoukhi, A., Hokka, M., Boetti, N. G., & Petit, L. (2019). Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds, 797, 797-803. https://doi.org/10.1016/j.jallcom.2019.05.151

Taddeo, R., Prajapati, S., & Lepistö, R. (2017). Optimizing ammonium adsorption on natural zeolite for wastewaters with high loads of ammonium and solids. Journal of Porous Materials, 24(6), 1545–1554. https://doi.org/10.1007/s10934-017-0394-1

Tanskanen, J. M. A., Kapucu, F. E., & Hyttinen, J. A. K. (2015). On the threshold based neuronal spike detection, and an objective criterion for setting the threshold. teoksessa International IEEE/EMBS Conference on Neural Engineering, NER (Sivut 1016-1019). IEEE COMPUTER SOCIETY PRESS. https://doi.org/10.1109/NER.2015.7146799

Teisala, H., Tuominen, M., & Kuusipalo, J. (2014). Superhydrophobic Coatings on Cellulose-Based Materials: Fabrication, Properties, and Applications. Advanced Materials Interfaces, 1(1), 1-20. [1300026]. https://doi.org/10.1002/admi.201300026

Teisala, H., Tuominen, M., Aromaa, M., Mäkelä, J. M., Stepien, M., Saarinen, J. J., ... Kuusipalo, J. (2011). Nanoparticle deposition on packaging materials by the liquid flame spray. teoksessa 13th European PLACE Conference 2011 (Vuosikerta 1)

Teisala, H., Geyer, F., Haapanen, J., Juuti, P., Mäkelä, J. M., Vollmer, D., & Butt, H. J. (2018). Ultrafast Processing of Hierarchical Nanotexture for a Transparent Superamphiphobic Coating with Extremely Low Roll-Off Angle and High Impalement Pressure. Advanced Materials, 30(14), [1706529]. https://doi.org/10.1002/adma.201706529

Teke, B., Lanz, M., Kämäräinen, J-K., & Hietanen, A. (2018). Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2. teoksessa 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018 [8449156] IEEE. https://doi.org/10.1109/MESA.2018.8449156

Thomas, K., Mohanty, G., Wehrs, J., Taylor, A. A., Pathak, S., Casari, D., ... Michler, J. (2019). Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films. Journal of Materials Science, 54(15), 10884-10901. https://doi.org/10.1007/s10853-019-03422-x

Tuurna, S., Varis, T., Penttilä, K., Ruusuvuori, K., Holmström, S., & Yli-Olli, S. (2011). Optimised selection of new protective coatings for biofuel boiler applications. Materials and Corrosion-Werkstoffe und Korrosion, 62(7), 642-649. https://doi.org/10.1002/maco.201005898

Tzounis, L., Debnath, S., Rooj, S., Fischer, D., Mäder, E., Das, A., ... Heinrich, G. (2014). High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers. Materials and Design, 58, 1-11. https://doi.org/10.1016/j.matdes.2014.01.071

Vähä-Nissi, M., Hirvikorpi, T., Sievänen, J., Salo, E., Harlin, A., Johansson, P., & Kuusipalo, J. (2011). Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates. teoksessa 13th European PLACE Conference 2011 (Vuosikerta 1, Sivut 447)

Välikangas, T., & Karvinen, R. (2018). Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger. Heat Transfer Engineering, 39(13-14), 1192-1200. https://doi.org/10.1080/01457632.2017.1363628

Välikangas, T., Singh, S., Sørensen, K., & Condra, T. (2018). Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design. International Journal of Heat and Mass Transfer, 118, 602-616. https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.006

Välikangas, T., Hærvig, J., Kuuluvainen, H., Dal Maso, M., Peltonen, P., & Vuorinen, V. (2019). Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD. International Journal of Heat and Mass Transfer, [119046]. https://doi.org/10.1016/j.ijheatmasstransfer.2019.119046

Valtonen, K., Ratia, V., Ramakrishnan, K. R., Apostol, M., Terva, J., & Kuokkala, V-T. (2019). Impact wear and mechanical behavior of steels at subzero temperatures. Tribology International, 129, 476-493. https://doi.org/10.1016/j.triboint.2018.08.016

Vazquez Fernandez, N., Isakov, M., Hokka, M., & Kuokkala, V. T. (2018). Effects of adiabatic heating estimated from tensile tests with continuous heating. teoksessa Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics (Vuosikerta 1, Sivut 1-7). (Conference Proceedings of the Society for Experimental Mechanics). Springer New York LLC. https://doi.org/10.1007/978-3-319-62956-8_1

Vitola, V., Lahti, V., Bite, I., Spustaka, A., Millers, D., Lastusaari, M., ... Smits, K. (2020). Low temperature afterglow from SrAl2O4: Eu, Dy, B containing glass. Scripta Materialia, 190, 86-90. https://doi.org/10.1016/j.scriptamat.2020.08.023

Vuorinen, E., Heino, V., Ojala, N., Haiko, O., & Hedayati, A. (2018). Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232(1), 3-13. https://doi.org/10.1177/1350650117739125

Vuornos, K., Ojansivu, M., Koivisto, J. T., Häkkänen, H., Belay, B., Montonen, T., ... Miettinen, S. (2019). Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels. Materials Science and Engineering C, 99, 905-918. https://doi.org/10.1016/j.msec.2019.02.035

Wang, X., Fagerlund, S., Massera, J., Södergård, B., & Hupa, L. (2017). Do properties of bioactive glasses exhibit mixed alkali behavior? Journal of Materials Science, 52(15), 8986–8997. https://doi.org/10.1007/s10853-017-0915-y

Wang, H., Feng, Y., Fang, Z., Yuan, W., & Khan, M. (2012). Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering. Materials Science and Engineering C: Materials for Biological Applications, 32(8), 2306-2315. https://doi.org/10.1016/j.msec.2012.07.001

Wani, O. M., Verpaalen, R., Zeng, H., Priimagi, A., & Schenning, A. P. H. J. (2019). An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks. Advanced Materials, 31(2), [1805985]. https://doi.org/10.1002/adma.201805985

Wendel, S., Karamanakos, P., Dietz, A., & Kennel, R. (2019). Operating point dependent variable switching point predictive current control for PMSM drives. teoksessa PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (Sivut 1-6). IEEE. https://doi.org/10.1109/PRECEDE.2019.8753362

Wu, H., Sariola, V., Zhu, C., Zhao, J., Sitti, M., & Bettinger, C. J. (2015). Transfer printing of metallic microstructures on adhesion-promoting hydrogel substrates. Advanced Materials, 27(22), 3398-3404. https://doi.org/10.1002/adma.201500954

Wu, D., Coatanea, E., & Wang, G. G. (2017). Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization. teoksessa 43rd Design Automation Conference The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201767601

Wu, D., Coatanea, E., & Wang, G. G. (2019). Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization. Journal of Mechanical Design, Transactions of the ASME, 141(4), [041402]. https://doi.org/10.1115/1.4042342

Yang, D., Feng, Y., Behl, M., Lendlein, A., Zhao, H., Khan, M., & Guo, J. (2012). Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate). teoksessa Multifunctional Polymer-Based Materials (Vuosikerta 1403, Sivut 171-176) https://doi.org/10.1557/opl.2012.702

Ylönen, M., Franc, J. P., Miettinen, J., Saarenrinne, P., & Fivel, M. (2019). Shedding frequency in cavitation erosion evolution tracking. International Journal of Multiphase Flow, 118, 141-149. https://doi.org/10.1016/j.ijmultiphaseflow.2019.06.009

Zeng, H., Wasylczyk, P., Wiersma, D. S., & Priimagi, A. (2018). Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials. Advanced Materials, 30(24), [1703554]. https://doi.org/10.1002/adma.201703554

Zhang, H., Zeng, H., Priimägi, A., & Ikkala, O. (2020). Viewpoint: Pavlovian Materials—Functional Biomimetics Inspired by Classical Conditioning. Advanced Materials, [1906619]. https://doi.org/10.1002/adma.201906619