Huttunen-Saarivirta E, Kilpi L, Pasanen AT, Salminen T, Ronkainen H. Tribocorrosion behaviour of tin bronze CuSn12 under a sliding motion in NaCl containing environment: Contact to inert vs. reactive counterbody. Tribology International. 2020 marras 1;151. 106389.

Kivioja H, Vinha J. Hot-box measurements to investigate the internal convection of highly insulated loose-fill insulation roof structures. Energy and Buildings. 2020 kesä 1;216. 109934.

Ryynänen T, Mzezewa R, Meriläinen E, Hyvärinen T, Lekkala J, Narkilahti S et al. Transparent microelectrode arrays fabricated by ion beam assisted deposition for neuronal cell in vitro recordings. Micromachines. 2020 touko 1;11(5). 497.

Shevkunov I, Katkovnik V, Claus D, Pedrini G, Petrov NV, Egiazarian K. Hyperspectral phase imaging based on denoising in complex-valued eigensubspace. Optics and Lasers in Engineering. 2020 huhti 1;127. 105973.

Belardini A, Leahu G, Petronijevic E, Hakkarainen T, Koivusalo E, Piton MR et al. Circular dichroism in the second harmonic field evidenced by asymmetric AU coated gaas nanowires. Micromachines. 2020 helmi 1;11(2):1-8.

Mäntylä A, Juoksukangas J, Hintikka J, Frondelius T, Lehtovaara A. FEM-based wear simulation for fretting contacts. Rakenteiden Mekaniikka. 2020 tammi 1;53(1):20-27.

Saarimaa V, Fuertes N, Persson D, Zavalis T, Kaleva A, Nikkanen J-P et al. Assessment of pitting corrosion in bare and passivated (wet scCO2-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS). Materials and Corrosion. 2020.

Paunonen L, Seifert D. Asymptotics and approximation of large systems of ordinary differential equations. Systems and Control Letters. 2020;140. 104703.

Juoksukangas J, Hintikka J, Lehtovaara A, Mäntylä A, Vaara J, Frondelius T. Avoiding the high friction peak in fretting contact. Rakenteiden Mekaniikka. 2020;53(1):12-19.

Di Vito D, Mosallaei M, Vahed BK, Kanerva M, Mäntysalo M. Deformability analysis and improvement in stretchable electronics systems through finite element analysis. julkaisussa Carcaterra A, Graziani G, Paolone A, toimittajat, Proceedings of XXIV AIMETA Conference 2019. Springer. 2020. s. 755-763. (Lecture Notes in Mechanical Engineering).

Priimägi A, (ed.), Hecht S, (ed.). From Responsive Molecules to Interactive Materials. Advanced Materials. 2020;32(20). 2000215.

Holopainen S. Käyräviivaiset koordinaatistot kontinuumimekaniikassa. Rakenteiden Mekaniikka. 2020;53(2):53-66.

Priimägi A, (ed.), Hecht S, (ed.). Special Issue: From Responsive Materials to Interactive Materials. Advanced Materials. 2020;32(20).

Chronopoulos A, Thorpe SD, Cortes E, Lachowski D, Rice AJ, Mykuliak VV et al. Syndecan-4 tunes cell mechanics by activating the kindlin-integrin-RhoA pathway. Nature Materials. 2020.

Zhang H, Zeng H, Priimägi A, Ikkala O. Viewpoint: Pavlovian Materials—Functional Biomimetics Inspired by Classical Conditioning. Advanced Materials. 2020. 1906619.

Santa-aho S, Laitinen A, Sorsa A, Vippola M. Barkhausen Noise Probes and Modelling: A Review. Journal of Nondestructive Evaluation. 2019 joulu 1;38(4). 94.

Pirjola L, Kuuluvainen H, Timonen H, Saarikoski S, Teinilä K, Salo L et al. Potential of renewable fuel to reduce diesel exhaust particle emissions. Applied Energy. 2019 marras 15;254. 113636.

Mäntylä A, Hintikka J, Frondelius T, Vaara J, Lehtovaara A, Juoksukangas J. Prediction of contact condition and surface damage by simulating variable friction coefficient and wear. Tribology International. 2019 marras 5. 106054.

Mäenpää P, Aref MM, Mattila J. FORMI: A Fast Holonomic Path Planning and Obstacle Representation Method Based on Interval Analysis. julkaisussa Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE. 2019. s. 398-403

Motlagh HDK, Lotfi F, Taghirad HD, Germi SB. Position Estimation for Drones based on Visual SLAM and IMU in GPS-denied Environment. julkaisussa ICRoM 2019 - 7th International Conference on Robotics and Mechatronics. IEEE. 2019. s. 120-124

Hintikka J, Mäntylä A, Vaara J, Frondelius T, Juoksukangas J, Lehtovaara A. Running-in in fretting, transition from near-stable friction regime to gross sliding. Tribology International. 2019 marras;143. 106073.

Mäntyranta A, Heino V, Isotahdon E, Salminen T, Huttunen-Saarivirta E. Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution. Tribology International. 2019 loka 1;138:250-262.

Perttula A, Nguyen N, Collin J, Jokinen J-P. Vehicle type detection and passenger satisfaction analysis using smartphone sensors and digital surveys. IET Intelligent Transport Systems. 2019 loka 1;13(10):1499-1506.

Reshef O, Saad-Bin-Alam M, Huttunen MJ, Carlow G, Sullivan BT, Ménard JM et al. Multiresonant High-Q Plasmonic Metasurfaces. Nano Letters. 2019 syys 11;19(9):6429-6434.

Ylönen M, Franc JP, Miettinen J, Saarenrinne P, Fivel M. Shedding frequency in cavitation erosion evolution tracking. International Journal of Multiphase Flow. 2019 syys 1;118:141-149.

Lehmusto J, Olin M, Viljanen J, Kalliokoski J, Mylläri F, Toivonen J et al. Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF. Materials and Corrosion. 2019 elo 30.

Kreutzer J, Viehrig M, Pölönen RP, Zhao F, Ojala M, Aalto-Setälä K et al. Pneumatic unidirectional cell stretching device for mechanobiological studies of cardiomyocytes. BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. 2019 elo 23.

Thomas K, Mohanty G, Wehrs J, Taylor AA, Pathak S, Casari D et al. Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films. Journal of Materials Science. 2019 elo 15;54(15):10884-10901.

Szczodra A, Mardoukhi A, Hokka M, Boetti NG, Petit L. Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds. 2019 elo 15;797:797-803.

Kezilebieke S, Žitko R, Dvorak M, Ojanen T, Liljeroth P. Observation of Coexistence of Yu-Shiba-Rusinov States and Spin-Flip Excitations. Nano Letters. 2019 heinä 10;19(7):4614-4619.

Juoksukangas J, Nurmi V, Hintikka J, Vippola M, Lehtovaara A, Mäntylä A et al. Characterization of cracks formed in large flat-on-flat fretting contact. International Journal of Fatigue. 2019 heinä;124:361-370.

Sautter JD, Xu L, Miroshnichenko AE, Lysevych M, Volkovskaya I, Smirnova DA et al. Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas. Nano Letters. 2019 kesä 12;19(6):3905-3911.

Vuornos K, Ojansivu M, Koivisto JT, Häkkänen H, Belay B, Montonen T et al. Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels. Materials Science and Engineering C. 2019 kesä 1;99:905-918.

Koivikko A, Sariola V. Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds. julkaisussa 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). IEEE. 2019. s. 509-513

Sanchez-Guevara C, Núñez Peiró M, Taylor J, Mavrogianni A, Neila González J. Assessing population vulnerability towards summer energy poverty: Case studies of Madrid and London. Energy and Buildings. 2019 touko 1;190:132-143.

Rossi M, Liegmann E, Karamanakos P, Castelli-Dezza F, Kennel R. Direct model predictive power control of a series-connected modular rectifier. julkaisussa PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE. 2019. s. 1-6

Wendel S, Karamanakos P, Dietz A, Kennel R. Operating point dependent variable switching point predictive current control for PMSM drives. julkaisussa PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE. 2019. s. 1-6

Itävuo P, Hulthén E, Yahyaei M, Vilkko M. Mass balance control of crushing circuits. Minerals Engineering. 2019 touko;135:37-47.

Wu D, Coatanea E, Wang GG. Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization. Journal of Mechanical Design, Transactions of the ASME. 2019 huhti;141(4). 041402.

Backas J, Ghabcheloo R. Nonlinear model predictive energy management of hydrostatic drive transmissions. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 2019 maalis 1;233(3):335-347.

Hintikka J, Mäntylä A, Vaara J, Frondelius T, Lehtovaara A. Stable and unstable friction in fretting contacts. Tribology International. 2019 maalis 1;131:73-82.

Nurmi V, Hintikka J, Juoksukangas J, Honkanen M, Vippola M, Lehtovaara A et al. The formation and characterization of fretting-induced degradation layers using quenched and tempered steel. Tribology International. 2019 maalis 1;131:258-267.

Liimatainen H, van Vliet O, Aplyn D. The potential of electric trucks – An international commodity-level analysis. Applied Energy. 2019 helmi 15;236:804-814.

Claude S, Ginestet S, Bonhomme M, Escadeillas G, Taylor J, Marincioni V et al. Evaluating retrofit options in a historical city center: Relevance of bio-based insulation and the need to consider complex urban form in decision-making. Energy and Buildings. 2019 tammi 1;182:196-204.

Pekkanen TT, Timonen RS, Lendvay G, Rissanen MP, Eskola AJ. Kinetics and thermochemistry of the reaction of 3-methylpropargyl radical with molecular oxygen. PROCEEDINGS OF THE COMBUSTION INSTITUTE. 2019 tammi 1;37(1):299-306.

Wani OM, Verpaalen R, Zeng H, Priimagi A, Schenning APHJ. An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks. Advanced Materials. 2019 tammi;31(2). 1805985.

Jaurola M, Hedin A, Tikkanen S, Huhtala K. A TOpti simulation for finding fuel saving by optimising propulsion control and power management. Journal of Marine Science and Technology (Japan). 2019.

Huttunen-Saarivirta E, Isotahdon E, Metsäjoki J, Salminen T, Ronkainen H, Carpén L. Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion. Tribology International. 2019;129:257-271.

Välikangas T, Hærvig J, Kuuluvainen H, Dal Maso M, Peltonen P, Vuorinen V. Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD. International Journal of Heat and Mass Transfer. 2019. 119046.

Houaoui A, Lyyra I, Agniel R, Pauthe E, Massera J, Boissière M. Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass. Materials Science and Engineering C. 2019;107. 110340.

Haiko O, Heino V, Porter DA, Uusitalo J, Kömi J. Effect of microstructure on the abrasive wear resistance of steels with hardness 450 HV. Tribologia. 2019;36(1):54-57.

Suokas E. Effect of polyolefin molecular structure on product properties in extrusion coating. julkaisussa 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press. 2019. s. 89-98

Ahonen T, Hanski J, Hyvärinen M, Kortelainen H, Uusitalo T, Vainio H et al. Enablers and barriers of smart data-based asset management services in industrial business networks. julkaisussa Lecture Notes in Mechanical Engineering. Pleiades Publishing. 2019. s. 51-60. (Lecture Notes in Mechanical Engineering).

Valtonen K, Ratia V, Ramakrishnan KR, Apostol M, Terva J, Kuokkala V-T. Impact wear and mechanical behavior of steels at subzero temperatures. Tribology International. 2019;129:476-493.

Gao Q, Linjama M, Paloniitty M, Zhu Y. Investigation on positioning control strategy and switching optimization of an equal coded digital valve system. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 2019.

Cheng YC, Lu HC, Lee X, Zeng H, Priimagi A. Kirigami-Based Light-Induced Shape-Morphing and Locomotion. Advanced Materials. 2019. 1906233.

Lahti J. Market implementation of active and intelligent packaging-opportunities from a socio-economic perspective. julkaisussa 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press. 2019. s. 419-427

Lahti J. Nanocellulose and Polylactic Acid Based Multilayer Coatings for Barrier Applications. julkaisussa 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press. 2019. s. 446-455

Alanen J, Ruiz Morales E, Muhammad A, Saarinen H, Minkkinen J. Remote diagnostics application software for remote handling equipment. Fusion Engineering and Design. 2019.

Linjamaa A, Lehtovaara A, Kallio M, Léger A. Running-in effects on friction of journal bearings under slow sliding speeds. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2019.

Matikainen V, Rubio Peregrina S, Ojala N, Koivuluoto H, Schubert J, Houdková et al. Slurry and dry particle erosion wear properties of WC-10Co4Cr and Cr3C2-25NiCr hardmetal coatings deposited by HVOF and HVAF spray processes. Tribologia. 2019;36(1-2):58-61.

Lemougna PN, Yliniemi J, Ismailov A, Levänen E, Tanskanen P, Kinnunen P et al. Spodumene tailings for porcelain and structural materials: Effect of temperature (1050–1200 °C) on the sintering and properties. Minerals Engineering. 2019. 105843.

Linjama M. Variable speed digital hydraulic transformer–based servo drive. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 2019.

Czaplicki R, Kiviniemi A, Huttunen MJ, Zang X, Stolt T, Vartiainen I et al. Less Is More: Enhancement of Second-Harmonic Generation from Metasurfaces by Reduced Nanoparticle Density. Nano Letters. 2018 joulu 12;18(12):7709-7714.

Ottosen NS, Ristinmaa M, Kouhia R. Enhanced multiaxial fatigue criterion that considers stress gradient effects. International Journal of Fatigue. 2018 marras 1;116:128-139.

Far MF, Mustafa B, Martin F, Rasilo P, Belahcen A. Flux-Weakening Control for IPMSM Employing Model Order Reduction. julkaisussa 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE. 2018. s. 1510-1516

Far MF, Mukherjee V, Martin F, Rasilo P, Belahcen A. Model Order Reduction of Bearingless Reluctance Motor Including Eccentricity. julkaisussa 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE. 2018. s. 2243-2249

Niemelä-Anttonen H, Koivuluoto H, Tuominen M, Teisala H, Juuti P, Haapanen J et al. Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles. Advanced Materials Interfaces. 2018 loka;5(20).

Šutka A, Käämbre T, Joost U, Kooser K, Kook M, Duarte RF et al. Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals. Journal of Alloys and Compounds. 2018 syys 30;763:164-172.

Mäkinen P, Mononen T, Mattila J. Inertial Sensor-Based State Estimation of Flexible Links Subject to Bending and Torsion. julkaisussa 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE. 2018. 8449188

Teke B, Lanz M, Kämäräinen J-K, Hietanen A. Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2. julkaisussa 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE. 2018. 8449156

Mahmoodpour M, Lobov A, Lanz M, Mäkelä P, Rundas N. Role-based visualization of industrial IoT-based systems. julkaisussa 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE. 2018. 8449183

Sippola P, Kolehmainen J, Ozel A, Liu X, Saarenrinne P, Sundaresan S. Experimental and numerical study of wall layer development in a tribocharged fluidized bed. Journal of Fluid Mechanics. 2018 elo 25;849:860-884.

Ghabcheloo R, Siddiqui S. Complete Odometry Estimation of a Vehicle Using Single Automotive Radar and a Gyroscope. julkaisussa MED 2018 - 26th Mediterranean Conference on Control and Automation. IEEE. 2018. s. 855-860. 8442474

Sajna MS, Perumbilavil S, Prakashan VP, Sanu MS, Joseph C, Biju PR et al. Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses. Materials Research Bulletin. 2018 elo 1;104:227-235.

Roldán Del Cerro P, Salminen T, Lastusaari M, Petit L. Persistent luminescent borosilicate glasses using direct particles doping method. Scripta Materialia. 2018 heinä 1;151:38-41.

Nommeots-Nomm A, Boetti NG, Salminen T, Massera J, Hokka M, Petit L. Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds. 2018 kesä 30;751:224-230.

Javaheri V, Nyyssönen T, Grande B, Porter D. Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium. Journal of Materials Engineering and Performance. 2018 kesä;27(6):2978-2992.

Oluoti K, Doddapaneni TRKC, Richards T. Investigating the kinetics and biofuel properties of Alstonia congensis and Ceiba pentandra via torrefaction. Energy. 2018 touko 1;150:134-141.

Koivusalo L, Karvinen J, Sorsa E, Jönkkäri I, Väliaho J, Kallio P et al. Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects. Materials Science and Engineering C. 2018 huhti;85:68-78.

Mohammed WM, Ramis Ferrer B, Iarovyi S, Negri E, Fumagalli L, Lobov A et al. Generic platform for manufacturing execution system functions in knowledge-driven manufacturing systems. International Journal of Computer Integrated Manufacturing. 2018 maalis 4;1-13.

Krogerus T, Hyvönen M, Huhtala K. Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors. Fuel. 2018 maalis;216:1-9.

Välikangas T, Karvinen R. Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger. Heat Transfer Engineering. 2018;39(13-14):1192-1200.

Soltani A, Curtze S, Lahti J, Järvelä K, Laurikka J, Hokka M et al. Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery. julkaisussa Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vuosikerta 4. Springer New York LLC. 2018. s. 19-27. (Conference Proceedings of the Society for Experimental Mechanics).

Vazquez Fernandez N, Isakov M, Hokka M, Kuokkala VT. Effects of adiabatic heating estimated from tensile tests with continuous heating. julkaisussa Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vuosikerta 1. Springer New York LLC. 2018. s. 1-7. (Conference Proceedings of the Society for Experimental Mechanics).

Vuorinen E, Heino V, Ojala N, Haiko O, Hedayati A. Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2018;232(1):3-13.

Välikangas T, Singh S, Sørensen K, Condra T. Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design. International Journal of Heat and Mass Transfer. 2018;118:602-616.

Coatanéa E, Wu D, Tsarkov V, Gary Wang G, Modi S, Jafarian H. Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs. julkaisussa 38th Computers and Information in Engineering Conference. Vuosikerta 1B-2018. The American Society of Mechanical Engineers ASME. 2018

Zeng H, Wasylczyk P, Wiersma DS, Priimagi A. Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials. Advanced Materials. 2018;30(24). 1703554.

Doddapaneni TRKC, Praveenkumar R, Tolvanen H, Rintala J, Konttinen J. Techno-economic evaluation of integrating torrefaction with anaerobic digestion. Applied Energy. 2018;213:272-284.

Jaurola M, Hedin A, Tikkanen S, Huhtala K. TOpti: a flexible framework for optimising energy management for various ship machinery topologies. Journal of Marine Science and Technology (Japan). 2018.

Teisala H, Geyer F, Haapanen J, Juuti P, Mäkelä JM, Vollmer D et al. Ultrafast Processing of Hierarchical Nanotexture for a Transparent Superamphiphobic Coating with Extremely Low Roll-Off Angle and High Impalement Pressure. Advanced Materials. 2018;30(14). 1706529.

Pyrhönen V-P, Koivisto H, Vilkko M. A Reduced-Order Two-Degree-of-Freedom Composite Nonlinear Feedback Control for a Rotary DC Servo Motor. julkaisussa Proceedings of the 56th IEEE Conference on Decision and Control. Melbourne, Australia. 2017. s. 2065-2071

Holmberg K, Kivikytö-Reponen P, Härkisaari P, Valtonen K, Erdemir A. Global energy consumption due to friction and wear in the mining industry. Tribology International. 2017 marras 1;115:116-139.

Layek RK, Uddin ME, Kim NH, Tak Lau AK, Lee JH. Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic. Composites Part B : Engineering. 2017 marras 1;128:155-163.

Heininen A, Aaltonen J, Koskinen KT. Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle. julkaisussa Aaltonen J, Virkkunen R, Koskinen KT, Kuivanen R, toimittajat, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Vuosikerta 2. Tampere: Tampere University of Technology. 2017. s. 53-56. 14

Boardman AD, Alberucci A, Assanto G, Grimalsky VV, Kibler B, McNiff J et al. Waves in hyperbolic and double negative metamaterials including rogues and solitons. Nanotechnology. 2017 loka 9;28(44). 444001.

Koivumäki J, Mattila J. Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps. Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 2017 loka 1;139(10). 101008.

Itävuo P, Hulthén E, Vilkko M. Feed-hopper level estimation and control in cone crushers. Minerals Engineering. 2017 elo 15;110:82-95.

Palagi S, Mark AG, Melde K, Qiu T, Zeng H, Parmeggiani C et al. Locomotion of light-driven soft microrobots through a hydrogel via local melting. julkaisussa International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE. 2017

Kreutzer J, Viehrig M, Maki A-J, Kallio P, Rahikainen R, Hytönen V. Pneumatically actuated elastomeric device for simultaneous mechanobiological studies & live-cell fluorescent microscopy. julkaisussa International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE. 2017

Laurila MM, Khorramdel B, Dastpak A, Mäntysalo M. Statistical analysis of E-jet print parameter effects on Ag-nanoparticle ink droplet size. Journal of Micromechanics and Microengineering. 2017 elo 2;27(9). 095005.

Antin KN, Pärnänen T. Democratizing composites manufacturing -inexpensive tooling empowers new players. SAMPE Journal. 2017 heinä 1;53(4):6-10.

Kivelä T, Mattila J, Puura J, Launis S. Redundant robotic manipulator path planning for real-time obstacle and self-collision avoidance. julkaisussa Ferraresi C, Quaglia G, toimittajat, Advances in Service and Industrial Robotics: Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Springer International Publishing. 2017. s. 208-216. (Mechanisms and Machine Science).

Stoykova E, Berberova N, Kim Y, Nazarova D, Ivanov B, Gotchev A et al. Dynamic speckle analysis with smoothed intensity-based activity maps. Optics and Lasers in Engineering. 2017 kesä 1;93:55-65.

Laakkonen P, Quadrat A. A fractional representation approach to the robust regulation problem for SISO systems. Systems and Control Letters. 2017 touko 1;103:32-37.

Lanz M, Tuokko R. Concepts, methods and tools for individualized production. PRODUCTION ENGINEERING. 2017 huhti 1;11(2):205-212.

Sekki T, Airaksinen M, Saari A. Effect of energy measures on the values of energy efficiency indicators in Finnish daycare and school buildings. Energy and Buildings. 2017 maalis 15;139:124-132.

Mashayekhi M, Winchester L, Laurila M-M, Mäntysalo M, Ogier S, Terés L et al. Chip-by-chip configurable interconnection using digital printing techniques. Journal of Micromechanics and Microengineering. 2017 maalis 6;27(4). 045009.

Seidt JD, Kuokkala V-T, Smith JL, Gilat A. Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates. Experimental Mechanics. 2017 helmi;57(2):219–229.

Suokas E. Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating. julkaisussa 16th TAPPI European PLACE Conference 2017. TAPPI Press. 2017. s. 529-544

Lahti J, Kamppuri T, Kuusipalo J. Novel bio-based materials for active and intelligent packaging. julkaisussa 16th TAPPI European PLACE Conference 2017. TAPPI Press. 2017

Lahti J, Kuusipalo J, Auvinen S. Novel equipment to simulate hot air heat sealability of packaging materials. julkaisussa 16th TAPPI European PLACE Conference 2017. TAPPI Press. 2017. s. 237-248

Kuusipalo J, Lahti J. Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland. julkaisussa 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017. Vuosikerta May-2017. TAPPI Press. 2017

Isotahdon E, Huttunen-Saarivirta E, Kuokkala V. Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets. Journal of Alloys and Compounds. 2017 tammi;692:190-197.

Huova M, Aalto A, Linjama M, Huhtala K, Lantela T, Pietola M. Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results. International Journal of Fluid Power. 2017;18(3):141-152.

Wu D, Coatanea E, Wang GG. Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization. julkaisussa 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME. 2017

Wang X, Fagerlund S, Massera J, Södergård B, Hupa L. Do properties of bioactive glasses exhibit mixed alkali behavior? Journal of Materials Science. 2017;52(15):8986–8997.

Haiko O, Miettunen I, Porter D, Ojala N, Ratia V, Heino V et al. Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel. Tribologia. 2017;35(1-2):5-21.

Mikkonen A, Karvinen R. Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production. julkaisussa IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) . 2017

Lindroos M, Laukkanen A, Cailletaud G, Kuokkala V-T. On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains. International Journal of Solids and Structures. 2017;125:68-76.

Taddeo R, Prajapati S, Lepistö R. Optimizing ammonium adsorption on natural zeolite for wastewaters with high loads of ammonium and solids. Journal of Porous Materials. 2017;24(6):1545–1554.

Koivuluoto H, Milanti A, Bolelli G, Latokartano J, Marra F, Pulci G et al. Structures and properties of laser-assisted cold-sprayed aluminum coatings. julkaisussa THERMEC 2016. Vuosikerta 879. Trans Tech Publications Ltd. 2017. s. 984-989. (Materials Science Forum).

Mishra A, Petit L, Pihl M, Andersson M, Salminen T, Rocherullé J et al. Thermal, structural and in vitro dissolution of antimicrobial copper-doped and slow resorbable iron-doped phosphate glasses. Journal of Materials Science. 2017;52(15):8957–8972.

Hintikka J, Lehtovaara A, Mäntylä A. Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact. TRIBOLOGY TRANSACTIONS. 2017;60(1):70-78.

Barreca D, Carraro G, Gasparotto A, Maccato C, Altantzis T, Sada C et al. Vapor Phase Fabrication of Nanoheterostructures Based on ZnO for Photoelectrochemical Water Splitting. Advanced Materials Interfaces. 2017;4(18). 1700161.

Carfora D, Gironimo GD, Esposito G, Huhtala K, Määttä T, Mäkinen H et al. Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach. Fusion Engineering and Design. 2016 marras 15;112:324-331.

Juoksukangas J, Lehtovaara A, Mäntylä A. Experimental and numerical investigation of fretting fatigue behavior in bolted joints. Tribology International. 2016 marras 1;103:440-448.

Järvinen H, Isakov M, Nyyssönen T, Järvenpää M, Peura P. The effect of initial microstructure on the final properties of press hardened 22MnB5 steels. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing. 2016 loka 31;676:109-120.

Juoksukangas J, Lehtovaara A, Mäntylä A. A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact. Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 2016 loka 1;230(10):1273-1287.

Sekki T, Andelin M, Airaksinen M, Saari A. Consideration of energy consumption, energy costs, and space occupancy in Finnish daycare centres and school buildings. Energy and Buildings. 2016 loka 1;129:199-206.

Mikkonen A, Karvinen R. Solar Panel Breakage During Heavy Rain Caused by Thermal Stress. julkaisussa Engineered Transparency 2016: Glass in Architechture and Structural Engineering. Wiley. 2016

Lindgren M, Santa-aho S, Vippola M. Barkhausen noise response of three different welded duplex stainless steels. Insight. 2016 syys 1;58(9):480-486.

Ellman A, Wendrich R, Tiainen T. Framework and feasibility study for pairwise comparison tool. julkaisussa Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina: ASME. 2016. DETC2016-59886

Luna E, Wu M, Hanke M, Puustinen J, Guina M, Trampert A. Spontaneous formation of three-dimensionally ordered Bi-rich nanostructures within GaAs1-xBix/GaAs quantum wells. Nanotechnology. 2016 heinä 1;27(32). 325603.

Rodríguez Ripoll M, Ojala N, Katsich C, Totolin V, Tomastik C, Hradil K. The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings. Materials and Design. 2016 kesä 5;99:509-520.

Philippi PC, Siebert DN, Hegele LA, Mattila KK. High-order lattice-Boltzmann. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2016 kesä 1;38(5):1401-1419.

Kuzmin M, Laukkanen P, Mäkelä J, Yasir M, Tuominen M, Dahl J et al. Toward the Atomically Abrupt Interfaces of SiOx/Semiconductor Junctions. Advanced Materials Interfaces. 2016 kesä;3(11). 1500510.

Janka L, Norpoth J, Eicher S, Rodríguez Ripoll M, Vuoristo P. Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment. Materials and Design. 2016 touko 15;98:135-142.

Hokka M, Black J, Tkalich D, Fourmeau M, Kane A, Hoang NH et al. Effects of strain rate and confining pressure on the compressive behavior of Kuru granite. International Journal of Impact Engineering. 2016 touko 1;91:183-193.

Kanerva U, Karhu M, Lagerbom J, Kronlöf A, Honkanen M, Turunen E et al. Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis. International Journal of Refractory Metals and Hard Materials. 2016 huhti 1;56:69-75.

Korkiakoski S, Brøndsted P, Sarlin E, Saarela O. Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates. International Journal of Fatigue. 2016 huhti 1;85:114-129.

Andersson P, Kilpi L, Holmberg K, Vaajoki A, Oksanen V. Static friction measurements on steel against uncoated and coated cast iron. Tribologia. 2016 tammi 1;34(1-2):5-40.

Paris H, Mokhtarian H, Coatanéa E, Museau M, Ituarte IF. Comparative environmental impacts of additive and subtractive manufacturing technologies. CIRP Annals: Manufacturing Technology. 2016;65(1):29-32.

Hartikainen J, Kolari K, Kouhia R. Development and numerical implementation of an anisotropic continuum damage model for concrete. julkaisussa Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd. 2016. s. 115-118. (Key Engineering Materials).

Hokka M, Mirow N, Nagel H, Vogt S, Kuokkala V-T. DIC measurements of the human heart during cardiopulmonary bypass surgery. julkaisussa Conference Proceedings of the Society for Experimental Mechanics Series. Vuosikerta 6. Springer New York LLC. 2016. s. 51-59

Hilliaho K, Köliö A, Pakkala T, Lahdensivu J, Vinha J. Effects of added glazing on Balcony indoor temperatures: Field measurements. Energy and Buildings. 2016;128:458-472.

Mäkinen J, Fränti K, Korhonen M, Fillion J, Heinisuo M. End-plate connections in Bi-axial bending - Measurements. julkaisussa Mazzolani FM, Squillace A, Faggiano B, Bellucci F, toimittajat, 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016. Vuosikerta 710. Trans Tech Publications Ltd. 2016. s. 275-280. (Key Engineering Materials).

Lahti J. Nanoscale barrier coating on BOPP packaging film by ALD. julkaisussa TAPPI PLACE Conference 2016: Exploring New Frontiers. TAPPI Press. 2016. s. 493-505

Hintikka J, Lehtovaara A, Mäntylä A. Normal displacements in non-Coulomb friction conditions during fretting. Tribology International. 2016;94:633-639.

Bolelli G, Milanti A, Lusvarghi L, Trombi L, Koivuluoto H, Vuoristo P. Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings. Tribology International. 2016;95:372-390.

Ihalainen TO, Aires L, Herzog FA, Schwartlander R, Moeller J, Vogel V. Differential basal-to-apical accessibility of lamin A/C epitopes in the nuclear lamina regulated by changes in cytoskeletal tension. Nature Materials. 2015 joulu 1;14(12):1252-1261.

Fedorik F, Malaska M, Hannila R, Haapala A. Improving the thermal performance of concrete-sandwich envelopes in relation to the moisture behaviour of building structures in boreal conditions. Energy and Buildings. 2015 marras 15;107:226-233.

Bourhis K, Massera J, Petit L, Koponen J, Fargues A, Cardinal T et al. Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties. Materials Research Bulletin. 2015 loka 1;70:47-54.

Sekki T, Airaksinen M, Saari A. Impact of building usage and occupancy on energy consumption in Finnish daycare and school buildings. Energy and Buildings. 2015 elo 18;105:247-257.

Gashti EHN, Malaska M, Kujala K. Analysis of thermo-active pile structures and their performance under groundwater flow conditions. Energy and Buildings. 2015 elo 11;105:1-8.

Syrjärinne P, Nummenmaa J, Thanisch P, Kerminen R, Hakulinen E. Analysing traffic fluency from bus data. IET Intelligent Transport Systems. 2015 elo 1;9(6):566-572.

Haaparanta A-M, Uppstu P, Hannula M, Ellä V, Rosling A, Kellomäki M. Improved dimensional stability with bioactive glass fibre skeleton in poly(lactide-co-glycolide) porous scaffolds for tissue engineering. Materials Science and Engineering C: Materials for Biological Applications. 2015 heinä 20;56:457-466. 5584.

Hakkarainen TV, Schramm A, Mäkelä J, Laukkanen P, Guina M. Lithography-free oxide patterns as templates for self-catalyzed growth of highly uniform GaAs nanowires on Si(111). Nanotechnology. 2015 heinä 18;26(27). 275301.

Carfora D, Di Gironimo G, Järvenpää J, Huhtala K, Määttä T, Siuko M. Divertor remote handling for DEMO: Concept design and preliminary FMECA studies. Fusion Engineering and Design. 2015 heinä 9;98-99:1437-1441.

Hintikka J, Lehtovaara A, Mäntylä A. Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel. Tribology International. 2015 heinä 2;92:191-202.

Mendes MR, Subramaniyam NP, Wendel-Mitoraj K. Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes. julkaisussa International IEEE/EMBS Conference on Neural Engineering, NER. Vuosikerta 2015-July. IEEE COMPUTER SOCIETY PRESS. 2015. s. 1092-1095

Tanskanen JMA, Kapucu FE, Hyttinen JAK. On the threshold based neuronal spike detection, and an objective criterion for setting the threshold. julkaisussa International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS. 2015. s. 1016-1019

Subramaniyam NP, Hyttinen J, Hatsopoulos NG, Takahashi K. Recurrence network analysis of wide band oscillations of local field potentials from the primary motor cortex reveals rich dynamics. julkaisussa International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS. 2015. s. 960-963

Le T, Lin Z, Wong CP, Tentzeris MM. Smart Skins: Could they be the ultimate sensing tool? Today\uFFFDs industry and personal medical care both strongly demand accurate, reliable, robust, lo. IEEE Nanotechnology Magazine. 2015 kesä 1;9(2):4-10. 7080864.

Wu H, Sariola V, Zhu C, Zhao J, Sitti M, Bettinger CJ. Transfer printing of metallic microstructures on adhesion-promoting hydrogel substrates. Advanced Materials. 2015 kesä 1;27(22):3398-3404.

Isotahdon E, Huttunen-Saarivirta E, Heinonen S, Kuokkala VT, Paju M. Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid. Journal of Alloys and Compounds. 2015 maalis 25;626:349-359.

Bautista G, Mäkitalo J, Chen Y, Dhaka V, Grasso M, Karvonen L et al. Second-harmonic generation imaging of semiconductor nanowires with focused vector beams. Nano Letters. 2015 helmi 6;15(3):1564-1569.

Ratia V, Rojacz H, Terva J, Valtonen K, Badisch E, Kuokkala VT. Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels. Tribology Letters. 2015 tammi 21;57(2). 15.

Czaplicki R, Mäkitalo J, Siikanen R, Husu H, Lehtolahti J, Kuittinen M et al. Second-Harmonic Generation from Metal Nanoparticles: Resonance Enhancement versus Particle Geometry. Nano Letters. 2015 tammi 14;15(1):530-534.

Mettänen M, Hirn U. A comparison of five optical surface topography measurement methods. TAPPI Journal. 2015 tammi 1;14(1):27-38.

Sekki T, Airaksinen M, Saari A. Measured energy consumption of educational buildings in a Finnish city. Energy and Buildings. 2015 tammi 1;87:105-115.

Martinez F, Neculqueo G, Vasquez SO, Lemmetyinen H, Efimov A, Vivo P. Branched thiophene oligomer/polymer bulk heterojunction organic solar cell. julkaisussa Materials Research Society Symposium Proceedings. Vuosikerta 1737. MATERIALS RESEARCH SOCIETY. 2015. s. 19-25

Palazzo G, De Tullio D, Magliulo M, Mallardi A, Intranuovo F, Mulla MY et al. Detection beyond Debye's length with an electrolyte-gated organic field-effect transistor. Advanced Materials. 2015;27(5):911-916.

Lindroos M, Apostol M, Kuokkala VT, Laukkanen A, Valtonen K, Holmberg K et al. Experimental study on the behavior of wear resistant steels under high velocity single particle impacts. International Journal of Impact Engineering. 2015;78:114-127.

Barreca D, Carraro G, Gasparotto A, Maccato C, Warwick MEA, Kaunisto K et al. Fe2O3-TiO2 Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation. Advanced Materials Interfaces. 2015;2(17).

Hokka M, Östman K, Rämö J, Kuokkala VT. High Temperature Tension HSB Device Based on Direct Electrical Heating. julkaisussa Song B, Casem D, Kimberley J, toimittajat, Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Vuosikerta 65. Springer. 2015. s. 227-233. (Conference Proceedings of the Society for Experimental Mechanics Series).

Pylkkänen K, Nurmikolu A, Guthrie WS, Argyle HM. Measurements and Modeling of Frost Depth in Railway Tracks. julkaisussa Proceedings of the International Conference on Cold Regions Engineering: 16th International Conference on Cold Regions Engineering 2015. American Society of Civil Engineers ASCE. 2015. s. 123-134

Mäkelä JM, Haapanen J, Aromaa M, Teisala H, Tuominen M, Stepien M et al. Roll-to-roll coating by liquid flame spray nanoparticle deposition. julkaisussa Materials Research Society Symposium Proceedings. Vuosikerta 1747. MATERIALS RESEARCH SOCIETY. 2015. s. 37-42

Björling M, Miettinen J, Marklund P, Lehtovaara A, Larsson R. The correlation between gear contact friction and ball on disc friction measurements. Tribology International. 2015;83:114-119.

Lindroos M, Apostol M, Heino V, Valtonen K, Laukkanen A, Holmberg K et al. The deformation, strain hardening, and wear behavior of chromium-alloyed hadfield steel in abrasive and impact conditions. Tribology Letters. 2015;57(3). 24.

Seppälä J, Salmenperä M. Towards dependable automation. julkaisussa Cyber Security: Analytics, Technology and Automation: Part IV. Springer International Publishing. 2015. s. 229-249. (Intelligent Systems, Control and Automation: Science and Engineering).

Sariola V, Sitti M. Mechanically Switchable Elastomeric Microfibrillar Adhesive Surfaces for Transfer Printing. Advanced Materials Interfaces. 2014 heinä 1;1(4). 1300159.

Borah D, Rasappa S, Senthamaraikannan R, Holmes JD, Morris MA. Graphoepitaxial Directed Self-Assembly of Polystyrene-Block-Polydimethylsiloxane Block Copolymer on Substrates Functionalized with Hexamethyldisilazane to Fabricate Nanoscale Silicon Patterns. Advanced Materials Interfaces. 2014 kesä 1;1(3). 1300102.

Teisala H, Tuominen M, Kuusipalo J. Superhydrophobic Coatings on Cellulose-Based Materials: Fabrication, Properties, and Applications. Advanced Materials Interfaces. 2014 helmi 1;1(1):1-20. 1300026.

Saintsing CD, Cook BS, Tentzeris MM. An origami inspired reconfigurable spiral antenna. julkaisussa 38th Mechanisms and Robotics Conference. Vuosikerta 5B. The American Society of Mechanical Engineers ASME. 2014

Coatanéa E, Nonsiri S, Christophe F, Mokammel F. Graph based representation and analyses for conceptual stages. julkaisussa 34th Computers and Information in Engineering Conference. Vuosikerta 1A. The American Society of Mechanical Engineers ASME. 2014

Tzounis L, Debnath S, Rooj S, Fischer D, Mäder E, Das A et al. High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers. Materials and Design. 2014;58:1-11.

Lahti J, Johansson P, Lahtinen K, Cameron DC, Seppänen T. Improving the effect of nanoscale barrier coating on BOPP film properties: Influence of substrate contamination, web handling and pretreatments. julkaisussa TAPPI PLACE Conference 2014. Vuosikerta 2. TAPPI Press. 2014. s. 1039-1061

Gordon TR, Paik T, Klein DR, Naik GV, Caglayan H, Boltasseva A et al. Shape-dependent plasmonic response and directed self-assembly in a new semiconductor building block, indium-doped cadmium oxide (ICO). Nano Letters. 2013 kesä 12;13(6):2857-2863.

Colace L, Santoni F, Assanto G. A near-infrared optoelectronic approach to detection of road conditions. Optics and Lasers in Engineering. 2013 touko;51(5):633-636.

Liimatainen V, Sariola V, Zhou Q. Controlling liquid spreading using microfabricated undercut edges. Advanced Materials. 2013 huhti 24;25(16):2275-2278.

Magliulo M, Mallardi A, Mulla MY, Cotrone S, Pistillo BR, Favia P et al. Electrolyte-gated organic field-effect transistor sensors based on supported biotinylated phospholipid bilayer. Advanced Materials. 2013 huhti 11;25(14):2090-2094.

Cochrane C, Mordon SR, Lesage JC, Koncar V. New design of textile light diffusers for photodynamic therapy. Materials Science and Engineering C: Materials for Biological Applications. 2013 huhti 1;33(3):1170-1175.

Rasappa S, Borah D, Faulkner CC, Lutz T, Shaw MT, Holmes JD et al. Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography. Nanotechnology. 2013 helmi 15;24(6). 065503.

Fafarman AT, Hong SH, Caglayan H, Ye X, Diroll BT, Paik T et al. Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals. Nano Letters. 2013 helmi 13;13(2):350-357.

Debnath SC, Das A, Basu D, Heinrich G. Naturally occurring amino acids: A suitable substitute of N-N/-di-phenyl guanidine (DPG) in silica tyre formulation? KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 2013 tammi;66(1-2):25-31.

Lahtinen K, Lahti J, Johansson P, Seppänen T, Cameron DC. Improving the effect of a nanoscale barrier coating on BOPP film properties by surface pretreatments. julkaisussa 14th European PLACE Conference 2013. Vuosikerta 1. TAPPI Press. 2013. s. 469-493

Ronkainen H, Kanerva U, Varis T, Ruusuvuori K, Turunen E, Peräntie J et al. Materials for electronics by thermal spraying. julkaisussa Physical and Numerical Simulation of Materials Processing VII. Vuosikerta 762. 2013. s. 451-456. (Materials Science Forum).

Alatalo M, Pitkänen H, Ropo M, Kokko K, Vitos L. Modeling of steels and steel surfaces using quantum mechanical first principles methods. julkaisussa Physical and Numerical Simulation of Materials Processing VII. Vuosikerta 762. 2013. s. 445-450. (Materials Science Forum).

Mokammel F, Coatanea E, Christophe F, Ba Khouya M, Medyna G. Towards an approach for evaluating the quality of requirements. julkaisussa 33rd Computers and Information in Engineering Conference. Vuosikerta 2 B. American Society of Mechanical Engineers. 2013. V02BT02A024

Wang H, Feng Y, Fang Z, Yuan W, Khan M. Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering. Materials Science and Engineering C: Materials for Biological Applications. 2012 joulu 1;32(8):2306-2315.

Kouhia R, Tůma M, Mäkinen J, Fedoroff A, Marjamäki H. Implementation of a direct procedure for critical point computations using preconditioned iterative solvers. Computers & Structures. 2012 loka;108-109:110-117.

Subramaniam K, Das A, Heinrich G. Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide. KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 2012 heinä;65(7-8):44-46.

Ahmed R, Priimagi A, Faul CFJ, Manners I. Redox-active, organometallic surface-relief gratings from azobenzene-containing polyferrocenylsilane block copolymers. Advanced Materials. 2012 helmi 14;24(7):926-931.

Caraffi C, Vojir T, Trefný J, Šochman J, Matas J. A system for real-time detection and tracking of vehicles from a single car-mounted camera. julkaisussa 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012. 2012. s. 975-982. 6338748

Yang D, Feng Y, Behl M, Lendlein A, Zhao H, Khan M et al. Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate). julkaisussa Multifunctional Polymer-Based Materials. Vuosikerta 1403. 2012. s. 171-176

Borah D, Rasappa S, Kosmala B, Holmes JD, Morris MA. Block copolymer self-assembly on ethylene glycol (EG) self-assembled monolayer (SAM) for nanofabrication. julkaisussa Nanoscale Materials Modification by Photon, Ion, and Electron Beams. Vuosikerta 1450. 2012. s. 8-13

Malas A, Das CK, Das A, Heinrich G. Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties. Materials and Design. 2012;39:410-417.

Rasilo P, Belahcen A, Arkkio A. Effect of rotor pole-shoe construction on losses of inverter-fed synchronous motors. julkaisussa Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. 2012. s. 1282-1286

Kurnitski J, Saari A, Kalamees T, Vuolle M, Niemelä J, Tark T. Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with REHVA definition for nZEB national implementation. Energy and Buildings. 2011 marras;43(11):3279-3288.

Kravchenko A, Shevchenko A, Ovchinnikov V, Priimagi A, Kaivola M. Optical interference lithography using azobenzene-functionalized polymers for micro-and nanopatterning of silicon. Advanced Materials. 2011 syys 22;23(36):4174-4177.

Chang B, Routa I, Sariola V, Zhou Q. Self-alignment of RFID dies on four-pad patterns with water droplet for sparse self-assembly. Journal of Micromechanics and Microengineering. 2011 syys;21(9). 095024.

Linko V, Leppiniemi J, Paasonen ST, Hytönen VP, Jussi Toppari J. Defined-size DNA triple crossover construct for molecular electronics: Modification, positioning and conductance properties. Nanotechnology. 2011 heinä 8;22(27). 275610.

Tuurna S, Varis T, Penttilä K, Ruusuvuori K, Holmström S, Yli-Olli S. Optimised selection of new protective coatings for biofuel boiler applications. Materials and Corrosion-Werkstoffe und Korrosion. 2011 heinä;62(7):642-649.

Lisjak D, Lintunen P, Hujanen A, Varis T, Bolelli G, Lusvarghi L et al. Hexaferrite/polyethylene Composite coatings prepared with flame spraying. Materials Letters. 2011 helmi 15;65(3):534-536.

Chang B, Sariola V, Jääskeläinen M, Zhou Q. Self-alignment in the stacking of microchips with mist-induced water droplets. Journal of Micromechanics and Microengineering. 2011 tammi;21(1). 015016.

Vähä-Nissi M, Hirvikorpi T, Sievänen J, Salo E, Harlin A, Johansson P et al. Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates. julkaisussa 13th European PLACE Conference 2011. Vuosikerta 1. 2011. s. 447

Medyna G, Coatanea E, Millet D. Evaluation of parts of a boat cabin based on exergy - Focusing on environmental and economic assessments. julkaisussa ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B toim. Vuosikerta 4. AMER SOC MECHANICAL ENGINEERS. 2011. s. 1083-1092

Teisala H, Tuominen M, Aromaa M, Mäkelä JM, Stepien M, Saarinen JJ et al. Nanoparticle deposition on packaging materials by the liquid flame spray. julkaisussa 13th European PLACE Conference 2011. Vuosikerta 1. 2011

Christophe F, Ritola T, Coatanéa E, Bernard A. Semantic analysis of function-solution duality. julkaisussa ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. Vuosikerta 3. 2011. s. 611-619

Coatanéa E, Ritola T, Tumer IY, Jensen D. A framework for building behavioral models for design-stage failure identification using dimensional analysis. julkaisussa Proceedings of the ASME Design Engineering Technical Conference. Vuosikerta 5. AMER SOC MECHANICAL ENGINEERS. 2010. s. 591-601

Lahti J, Tuominen M, Penttinen T, Räsänen JP, Kuusipalo J. The effects of corona and flame treatment: Part 2. PE-HD and PP coated papers. julkaisussa TAPPI Press - 12th European PLACE Conference 2009. Vuosikerta 1. 2009. s. 278-314

Coatanéa E, Yannou B, Honkala S, Lajunen A, Saarelainen T, Makkonen P. Measurement theory and dimensional analysis: Methodological impact on the comparison and evaluation process. julkaisussa 19th International Conference on Design Theory and Methodology and 1st International Conference on Micro and Nano Systems, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007. AMER SOC MECHANICAL ENGINEERS. 2008. s. 173-182

Lahtinen K, Kuusipalo J. Statistical modeling of water vapor transmission rates for extrusion-coated papers. julkaisussa TAPPI 2008 PLACE Conference: Innovations in Flexible Consumer Packaging. 2008

Lorimer GW, Dicken R, Peura P, Pilkington R, Younes CM, Allen GC et al. The effect of phosphorous and arsenic on the fracture behaviour of a 2,25% Cr-1% Mo Steel. Materials Science Forum. 1996 joulu 1;207-209(PART 2):645-648.