Temerov, F., Pham, K., Juuti, P., Mäkelä, J. M., Grachova, E. V., Kumar, S., ... Saarinen, J. J. (2020). Silver-Decorated TiO2 Inverse Opal Structure for Visible Light-Induced Photocatalytic Degradation of Organic Pollutants and Hydrogen Evolution. ACS Applied Materials & Interfaces, 12(37), 41200-41210. https://doi.org/10.1021/acsami.0c08624

Sriplai, N., Mangayil, R., Pammo, A., Santala, V., Tuukkanen, S., & Pinitsoontorn, S. (2019). Enhancing piezoelectric properties of bacterial cellulose films by incorporation of MnFe2O4 nanoparticles. Carbohydrate Polymers, 231. https://doi.org/10.1016/j.carbpol.2019.115730

Zeng, H., Lahikainen, M., Liu, L., Ahmed, Z., Wani, O. M., Wang, M., ... Priimagi, A. (2019). Light-fuelled freestyle self-oscillators. Nature Communications, 10(1), [5057]. https://doi.org/10.1038/s41467-019-13077-6

Kastinen, T., da Silva Filho, D. A., Paunonen, L., Linares, M., Ribeiro Junior, L. A., Cramariuc, O., & Hukka, T. I. (2019). Electronic couplings and rates of excited state charge transfer processes at poly(thiophene-co-quinoxaline)–PC71BM interfaces: two- versus multi-state treatments. Physical Chemistry Chemical Physics, 21(46), 25606-25625. https://doi.org/10.1039/C9CP04837E

Leduc, J., Gönüllü, Y., Ruoko, T-P., Fischer, T., Mayrhofer, L., Tkachenko, N. V., ... Mathur, S. (2019). Electronically Coupled Uranium and Iron Oxide Heterojunctions as Efficient Water Oxidation Catalysts. Advanced Functional Materials, [1905005]. https://doi.org/10.1002/adfm.201905005

Ali-Löytty, H., Valden, M., Hannula, M., Eilert, A., Ogasawara, H., & Nilsson, A. (2019). Chemical Dissolution of Pt(111) During Potential Cycling Under Negative pH Conditions Studied by Operando X-ray Photoelectron Spectroscopy. Journal of Physical Chemistry C, 123(41), 25128-25134. https://doi.org/10.1021/acs.jpcc.9b05201

Mahtabani, A., Rytöluoto, I., He, X., Saarimäki, E., Lahti, K., Paajanen, M., ... Blume, A. (2019). Solution Modified Fumed Silica and Its Effect on Charge Trapping Behavior of PP/POE/Silica Nanodielectrics. teoksessa Proceedings of the 26th Nordic Insulation Symposium (Sivut 129-133). (Proceedings of the Nordic Insulation Symposium ). NTNU, Norway: Nordic Insulation Symposium. https://doi.org/10.5324/nordis.v0i26.3292

Eregowda, T. (2019). Anaerobic treatment and resource recovery from methanol rich waste gases and wastewaters. (Tampere University Dissertations). Tampere University.

Assoah, B., Veiros, L. F., & R. Candeias, N. (2019). Pinacol-Derived Chlorohydrosilane in Metal-Free Reductive Amination for the Preparation of Tertiary Alkylphenolmethyl Amines. Organic Letters, 21(5), 1402-1406. https://doi.org/10.1021/acs.orglett.9b00121

Järvinen, H., Honkanen, M., Oja, O., Järvenpää, M., & Peura, P. (2019). Microstructure-property relationships of novel ultra-high strength press hardening steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50(2), 816-836. https://doi.org/10.1007/s11661-018-4967-7

Levänen, E., & Singh, A. (2018). Titanium oxide based nanoparticles by laser ablation in supercritical carbon dioxide. Julkaisun esittämispaikka: The 8th International Conference on Manipulation, Manufacturing and measurement on the Nanoscale, Kiina.

Nikkanen, J-P., Kaleva, A., Saarimaa, V., Honkanen, M., Vuorinen, T., Heinonen, S., ... Levänen, E. (2018). Utilization of CO2 in modification of galvanized steel surface. Julkaisun esittämispaikka: The International Symposium on Inorganic and Environmental Materials 2018, Ghent, Belgia.

Khan, M., Koivisto, J., Hukka, T., Hokka, M., & Kellomäki, M. (2018). Composite Hydrogels Using Bioinspired Approach with in Situ Fast Gelation and Self-Healing Ability as Future Injectable Biomaterial. ACS Applied Materials & Interfaces, 10(14), 11950-11960. https://doi.org/10.1021/acsami.8b01351

Keipi, T., Tolvanen, H., & Konttinen, J. (2018). Economic analysis of hydrogen production by methane thermal decomposition: Comparison to competing technologies. Energy Conversion and Management, 159, 264-273. https://doi.org/10.1016/j.enconman.2017.12.063

He, X., Benniston, A. C., Lemmetyinen, H., & Tkachenko, N. V. (2018). Charge Shift/Recombination and Triplet Formation in a Closely-Spaced Molecular Dyad based on a Borondipyrromethene (Bodipy) and an Expanded Acridinium Cation. ChemPhotoChem, 2(3), 277-282. https://doi.org/10.1002/cptc.201700184

Vaikuntam, S. R., Stöckelhuber, K. W., Subramani Bhagavatheswaran, E., Wießner, S., Scheler, U., Saalwächter, K., ... Das, A. (2018). Entrapped Styrene Butadiene Polymer Chains by Sol-Gel-Derived Silica Nanoparticles with Hierarchical Raspberry Structures. Journal of Physical Chemistry B, 122(6), 2010-2022. https://doi.org/10.1021/acs.jpcb.7b11792

Saarimaa, V., Kaleva, A., Paunikallio, T., Nikkanen, J-P., Heinonen, S., Levänen, E., ... Markkula, A. (2018). Convenient extraction method for quantification of thin zinc patina layers. Surface and Interface Analysis, 50(5), 564-570. https://doi.org/10.1002/sia.6429

Solismaa, S., Ismailov, A., Karhu, M., Sreenivasan, H., Lehtonen, M., Kinnunen, P., ... Räisänen, M-L. (2018). Valorization of Finnish mining tailings for use in the ceramics industry. BULLETIN OF THE GEOLOGICAL SOCIETY OF FINLAND, 90(1), 33-54. https://doi.org/10.17741/bgsf/90.1.002

Layek, R. K., Uddin, M. E., Kim, N. H., Tak Lau, A. K., & Lee, J. H. (2017). Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic. Composites Part B : Engineering, 128, 155-163. https://doi.org/10.1016/j.compositesb.2017.07.010

Keipi, T., Li, T., Løvås , T., Tolvanen, H., & Konttinen, J. (2017). Methane thermal decomposition in regenerative heat exchanger reactor: Experimental and modeling study. Energy, 135, 823-832. https://doi.org/10.1016/j.energy.2017.06.176

Mangayil, R., Rajala, S., Pammo, A., Sarlin, E., Luo, J., Santala, V., ... Tuukkanen, S. (2017). Engineering and Characterization of Bacterial Nanocellulose Films as Low Cost and Flexible Sensor Material. ACS Applied Materials & Interfaces, 9(22), 19048–19056. https://doi.org/10.1021/acsami.7b04927

Lindroos, M., Laukkanen, A., Cailletaud, G., & Kuokkala, V-T. (2017). On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains. International Journal of Solids and Structures, 125, 68-76. https://doi.org/10.1016/j.ijsolstr.2017.07.015

Hiltunen, A., Lahtonen, K., Saari, J., Ojanperä, A., Sarlin, E., Wondraczek, H., ... Lemmetyinen, H. (2017). Tailored Fabrication of Transferable and Hollow Weblike Titanium Dioxide Structures. ChemPhysChem, 18, 64-71. https://doi.org/10.1002/cphc.201600930

Kamppuri, T., Vehviläinen, M., Backfolk, K., & Heiskanen, I. (2016). Characterization of endoglucanase rich Trichoderma reesei cellulase mixtures and their effect on alkaline solubility of dissolving pulp. Cellulose, 23(6), 3901–3911. https://doi.org/10.1007/s10570-016-1055-2

Heinonen, S., Kannisto, M., Nikkanen, J-P., Huttunen-Saarivirta, E., Karp, M., & Levänen, E. (2016). Photocatalytic and antibacterial properties of ZnO films with different surface topographies on stainless steel substrate. Thin Solid Films, 616, 842-849. https://doi.org/10.1016/j.tsf.2016.10.002

Keipi, T., Tolvanen, K. E. S., Tolvanen, H., & Konttinen, J. (2016). Thermo-catalytic decomposition of methane: The effect of reaction parameters on process design and the utilization possibilities of the produced carbon. Energy Conversion and Management, 126, 923-934. https://doi.org/10.1016/j.enconman.2016.08.060

Taddeo, R., Kolppo, K., & Lepistö, R. (2016). Sustainable nutrients recovery and recycling by optimizing the chemical addition sequence for struvite precipitation from raw swine slurries. Journal of Environmental Management, 180, 52-58. https://doi.org/10.1016/j.jenvman.2016.05.009

Leppänen, A., & Välimäki, E. (2016). Improving Recovery Boiler Availability through Understanding Fume Behavior. TAPPI Journal, 15(3), 187-193.

Koivula, H. M., Jalkanen, L., Saukkonen, E., Ovaska, S-S., Lahti, J., Christophliemk, H., & Mikkonen, K. S. (2016). Machine-coated starch-based dispersion coatings prevent mineral oil migration from paperboard. Progress in Organic Coatings, 99, 173-181. https://doi.org/10.1016/j.porgcoat.2016.05.017

Higashino, T., Yamada, T., Yamamoto, M., Furube, A., Tkachenko, N. V., Miura, T., ... Imahori, H. (2016). Remarkable Dependence of the Final Charge Separation Efficiency on the Donor-Acceptor Interaction in Photoinduced Electron Transfer. Angewandte Chemie (International Edition), 55(2), 629-633. https://doi.org/10.1002/anie.201509067

Keipi, T., Hankalin, V., Nummelin, J., & Raiko, R. (2016). Techno-economic analysis of four concepts for thermal decomposition of methane: Reduction of CO2 emissions in natural gas combustion. Energy Conversion and Management, 110, 1-12. https://doi.org/10.1016/j.enconman.2015.11.057

Timonen, J., Antikainen, M., Das, A., Sarlin, E., & Vuorinen, J. (2016). Towards material excellence: Evaluation of Tekes' programmes on materials. Tekes.

Köliö, A., Honkanen, M., Lahdensivu, J., Vippola, M., & Pentti, M. (2015). Corrosion products of carbonation induced corrosion in existing reinforced concrete facades. Cement and Concrete Research, 78, 200-207. https://doi.org/10.1016/j.cemconres.2015.07.009

Grönqvist, S., Kamppuri, T., Maloney, T., Vehviläinen, M., Liitiä, T., & Suurnäkki, A. (2015). Enhanced pre-treatment of cellulose pulp prior to dissolution into NaOH/ZnO. Cellulose, 22(6), 3981-3990. https://doi.org/10.1007/s10570-015-0742-8

Mayrhofer, E., Janka, L., Mayr, W. P., Norpoth, J., Rodriguez Ripoll, M., & Gröschl, M. (2015). Cracking resistance of Cr3C2–NiCr and WC–Cr3C2–Ni thermally sprayed coatings under tensile bending stress. Surface and Coatings Technology, 281, 169-175. https://doi.org/10.1016/j.surfcoat.2015.09.002

Kärkkäinen, M., Kolli, T., Honkanen, M., Heikkinen, O., Huuhtanen, M., Kallinen, K., ... Keiski, R. L. (2015). The Effect of Phosphorus Exposure on Diesel Oxidation Catalysts-Part I: Activity Measurements, Elementary and Surface Analyses. Topics in Catalysis, 58(14), 961-970. https://doi.org/10.1007/s11244-015-0464-z

Honkanen, M., Kärkkäinen, M., Heikkinen, O., Kallinen, K., Kolli, T., Huuhtanen, M., ... Vippola, M. (2015). The Effect of Phosphorus Exposure on Diesel Oxidation Catalysts-Part II: Characterization of Structural Changes by Transmission Electron Microscopy. Topics in Catalysis, 58(14), 971-976. https://doi.org/10.1007/s11244-015-0465-y

Harra, J., Juuti, P., Haapanen, J., Sorvali, M., Roumeli, E., Honkanen, M., ... Mäkelä, J. M. (2015). Coating of Silica and Titania Aerosol Nanoparticles by Silver Vapor Condensation. Aerosol Science and Technology, 49(9), 767-776. https://doi.org/10.1080/02786826.2015.1072263

Frankberg, E. J., George, L., Efimov, A., Honkanen, M., Pessi, J., & Levänen, E. (2015). Measuring synthesis yield in graphene oxide synthesis by modified hummers method. Fullerenes Nanotubes and Carbon Nanostructures, 23(9), 755-759. https://doi.org/10.1080/1536383X.2014.993754

Lepcha, A., Maccato, C., Mettenbörger, A., Andreu, T., Mayrhofer, L., Walter, M., ... Mathur, S. (2015). Electrospun Black Titania Nanofibers: Influence of Hydrogen Plasma-Induced Disorder on the Electronic Structure and Photoelectrochemical Performance. Journal of Physical Chemistry C, 119(33), 18835-18842. https://doi.org/10.1021/acs.jpcc.5b02767

Aghaee, M., Maydannik, P. S., Johansson, P., Kuusipalo, J., Creatore, M., Homola, T., & Cameron, D. C. (2015). Low temperature temporal and spatial atomic layer deposition of TiO2 films. Journal of Vacuum Science & Technology A, 33(4), [041512]. https://doi.org/10.1116/1.4922588

Vehviläinen, M., Kamppuri, T., Gronqvist, S., Rissanen, M., Maloney, T., Honkanen, M., & Nousiainen, P. (2015). Dissolution of enzyme-treated cellulose using freezing thawing method and the properties of fibres regenerated from the solution. Cellulose, 22(3), 1653-1674. https://doi.org/10.1007/s10570-015-0632-0

Virtanen, T., Penttilä, P. A., Maloney, T. C., Grönqvist, S., Kamppuri, T., Vehviläinen, M., ... Maunu, S. L. (2015). Impact of mechanical and enzymatic pretreatments on softwood pulp fiber wall structure studied with NMR spectroscopy and X-ray scattering. Cellulose, 22(3), 1565-1576. https://doi.org/10.1007/s10570-015-0619-x

Puranen, J., Laakso, J., Honkanen, M., Heinonen, S., Kylmälahti, M., Lugowski, S., ... Vuoristo, P. (2015). High temperature oxidation tests for the high velocity solution precursor flame sprayed manganese-cobalt oxide spinel protective coatings on SOFC interconnector steel. International Journal of Hydrogen Energy, 40(18), 6216-6227. https://doi.org/10.1016/j.ijhydene.2015.02.129

Diao, F., Liang, W., Tian, F., Wang, Y., Vivo, P., Efimov, A., & Lemmetyinen, H. (2015). Preferential Attachments of Organic Dyes onto {101} Facets of TiO2 Nanoparticles. Journal of Physical Chemistry C, 119(16), 8960-8965. https://doi.org/10.1021/acs.jpcc.5b01369

Carver, S. M., Nelson, M. C., Yu, Z., & Tuovinen, O. H. (2015). Fermentative metabolism of an anaerobic, thermophilic consortium on plant polymers and commercial paper samples. Biomass & Bioenergy, 75, 11-22. https://doi.org/10.1016/j.biombioe.2015.02.005

Saarikoski, E., Rissanen, M., & Seppälä, J. (2015). Effect of rheological properties of dissolved cellulose/microfibrillated cellulose blend suspensions on film forming. Carbohydrate Polymers, 119, 62-70. https://doi.org/10.1016/j.carbpol.2014.11.033

Leppänen, A. (2015). Modeling Fume Particle Dynamics and Deposition with Alkali Metal Chemistry in Kraft Recovery Boilers. (Tampere University of Technology. Publication; Vuosikerta 1273). Tampere: Tampere University of Technology.

Yi, H., Albrecht, M., Valkonen, A., & Rissanen, K. (2015). Perfluoro-1,1′-biphenyl and perfluoronaphthalene and their derivatives as π-acceptors for anions. New Journal of Chemistry, 39(1), 746-749. https://doi.org/10.1039/c4nj01654h

Tuominen, J., Näkki, J., Pajukoski, H., Nyyssönen, T., Ristonen, T., Peltola, T., & Vuoristo, P. (2015). High performance wear and corrosion resistant coatings by novel cladding techniques. teoksessa T. S. Sudarshan, P. Vuoristo, & H. Koivuluoto (Toimittajat), Surface Modification Technologies XXVIII: Proceedings of the 28th International Conference on Surface Modification Technologies (Sivut 105-117). Valardocs.

Köliö, A., Honkanen, M., & Lahdensivu, J. (2015). Corrosion propagation phase studies on Finnish reinforced concrete facades. teoksessa 1st International Symposium on Building Pathology: ISBP 2015 Porto: FEUP Edicoes (Faculdade de Engenharia da Universidade do Porto Edicoes).

Sarlin, E., Rosling, A., Mustakangas, M., Laihonen, P., Lindgren, M., & Vuorinen, J. (2015). Diffusion of acidic solution through rubber at high temperature and its effect on metal-rubber interface degradation. teoksessa Proceedings of SAMPE Europe Conference

Ramamoorthy, S. K., Skrifvars, M., & Rissanen, M. (2015). Effect of alkali and silane surface treatments on regenerated cellulose fibre type (Lyocell) intended for composites. Cellulose, 22(1), 637-654. https://doi.org/10.1007/s10570-014-0526-6

Vapaavuori, J., Ras, R. H. A., Kaivola, M., Bazuin, C. G., & Priimägi, A. (2015). From partial to complete optical erasure of azobenzene-polymer gratings: effect of molecular weight. Journal of Materials Chemistry C, 3(42), 11011-11016. https://doi.org/10.1039/C5TC01776A

Sarlin, E. L., Lindgren, M., Suihkonen, R. J., Siljander, S. M. K., Kakkonen, M. M. S., & Vuorinen, J. E. (2015). High-temperature slurry erosion of vinylester matrix composites – The effect of test parameters. Wear, 328-329, 488-497. https://doi.org/10.1016/j.wear.2015.03.021

Beyeh, N. K., Valkonen, A., Bhowmik, S., Pan, F., & Rissanen, K. (2015). N-Alkyl ammonium resorcinarene salts: multivalent halogen-bonded deep-cavity cavitands. Organic chemistry frontiers, 2(4), 340-345. https://doi.org/10.1039/c4qo00326h

Koivuluoto, H., Stenroos, C., Ruohomaa, R., Bolelli, G., Lusvarghi, L., & Vuoristo, P. (2015). Research on icing behavior and ice adhesion testing of icephobic surfaces. teoksessa 16th International Workshop on Atmospheric Icing of Structures, IWAIS 2015, June 28-July 3, 2015, Uppsala, Sweden (Sivut 183-188)

Leppänen, A., Välimäki, E., & Oksanen, A. (2015). Simulation of ash-forming compounds in the kraft recovery boiler. teoksessa 10th European Conference on Industrial Furnaces and Boilers Porto, Portugal.

Wacharine, I., Valkonen, A., Rzaigui, M., & Smirani, W. (2015). Synthesis, crystal structure, spectral, dielectric characteristics and conduction mechanism of two novel carboxylates of 1-benzhydrylpiperazine. Monatshefte fur Chemie, 146(12), 2007-2020. https://doi.org/10.1007/s00706-015-1553-1

Siljander, S., Lehmonen, J., Tanaka, A., Ketoja, J., Heikkilä, P., Lahti, J., ... Vuorinen, J. (2015). The effect of physical adhesion promotion treatments on interfacial adhesion in cellulose-epoxy composite. teoksessa Proceedings of the 20th International Conference on Composite Materials

Grönqvist, S., Treimanis, A., Kamppuri, T., Maloney, T., Skute, M., Grinfelds, U., ... Suurnäkki, A. (2015). The effect of the outermost fibre layers on solubility of dissolving grade pulp. Cellulose, 22(6), 3955-3965. https://doi.org/10.1007/s10570-015-0709-9

Leppänen, A., Tran, H., Taipale, R., Välimäki, E., & Oksanen, A. (2014). Numerical modeling of fine particle and deposit formation in a recovery boiler. Fuel, 129, 45-53. https://doi.org/10.1016/j.fuel.2014.03.046

Tuominen, M., Teisala, H., Aromaa, M., Stepien, M., Mäkelä, J. M., Saarinen, J. J., ... Kuusipalo, J. (2014). Creation of superhydrophilic surfaces of paper and board. Journal of Adhesion Science and Technology, 28(8-9), 864-879. https://doi.org/10.1080/01694243.2012.697744

Qvintus, P., Kataja, K., Heikkilä, P., Salmela, J., Lehmonen, J., Ketoja, J., ... Vuorinen, T. (2014). Design driven world of cellulose-from bulk to luxury? teoksessa Fibre Value Chain Conference and Expo 2014: Pulp and Paper Bioenergy Bioproducts (Sivut 67-74). Appita Inc..

Vishtal, A., & Retulainen, E. (2014). Improving the extensibility, wet web and dry strength of paper by addition of agar. Nordic Pulp and Paper Research Journal, 29(3), 434-443.

Leppänen, A., Tran, H., Välimäki, E., & Oksanen, A. (2014). Modelling fume deposit growth in recovery boilers: effect of flue gas and deposit temperature. Journal of Science and Technology for Forest Products and Processes, 4(1), 50-57.

Mylläri, V., Ruoko, T. P., & Järvelä, P. (2014). The effects of UV irradiation to polyetheretherketone fibres: Characterization by different techniques. Polymer Degradation and Stability, 109, 278-284. https://doi.org/10.1016/j.polymdegradstab.2014.08.003

Teisala, H., Tuominen, M., Aromaa, M., Stepien, M., Mäkelä, J. M., Saarinen, J. J., ... Kuusipalo, J. (2013). High- and low-adhesive superhydrophobicity on the liquid flame spray-coated board and paper: structural effects on surface wetting and transition between the low- and high-adhesive states. Colloid and Polymer Science, 291(2), 447-455. https://doi.org/10.1007/s00396-012-2833-5

Tuominen, M., Ek, M., Saloranta, P., Toivakka, M., & Kuusipalo, J. (2013). The effect of flame treatment on surface properties and heat sealability of low-density polyethylene coating. Packaging Technology and Science, 26(4), 201-214. https://doi.org/10.1002/pts.1975

Teisala, H., Tuominen, M., Stepien, M., Haapanen, J., Mäkelä, J. M., Saarinen, J. J., ... Kuusipalo, J. (2013). Wettability conversion on the liquid flame spray generated superhydrophobic TiO2 nanoparticle coating on paper and board by photocatalytic decomposition of spontaneously accumulated carbonaceous overlayer. Cellulose, 20(1), 391-408. https://doi.org/10.1007/s10570-012-9825-y

Lahtinen, K., Johansson, P., Kääriäinen, T., & Cameron, D. C. (2012). Adhesion of Extrusion-Coated Polymer Sealing Layers to a Fiber-Based Packaging Material with an Atomic Layer Deposited Aluminum Oxide Surface Coating. Polymer Engineering and Science, 52(9), 1985-1990. https://doi.org/10.1002/pen.23148

Aromaa, M., Arffman, A., Suhonen, H., Haapanen, J., Keskinen, J., Honkanen, M., ... Mäkelä, J. M. (2012). Atmospheric synthesis of superhydrophobic TiO2 nanoparticle deposits in a single step using Liquid Flame Spray. Journal of Aerosol Science, 52, 57-68. https://doi.org/10.1016/j.jaerosci.2012.04.009

Aromaa, M., Haapanen, J., Teisala, H., Tuominen, M., Kuusipalo, J., Stepien, M., ... Mäkelä, J. M. (2012). Flame deposition of superhydrophobic and superhydrophilic nanoparticle coating on paperboard materials. teoksessa Nanotechnology 2012: Advanced Materials, CNTs, Particles, Films and Composites - 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2012, Santa Clara, CA, USA, 18-21 June 2012 (Sivut 365-367). (Nanotechnology Conference and Expo Nanotech). Nano Science and Technology Institute NSTI.

Lahti, J., & Lavonen, J. (2012). Nanoscale surface processing of extrusion coated substrates and plastic films with atmospheric plasma activation and deposition. teoksessa TAPPI PLACE Conference 2012, Helping Me Do My Job Better, Seattle, Washington, USA, 6-9 May 2012 (Sivut 588-600). (TAPPI PLACE Conference). TAPPI Press; Curran Associates, Inc.

Teisala, H., Tuominen, M., Aromaa, M., Stepien, M., Mäkelä, J. M., Saarinen, J. J., ... Kuusipalo, J. (2012). Nanostructures Increase Water Droplet Adhesion on Hierarchically Rough Superhydrophobic Surfaces. Langmuir, 28(6), 3138-3145. https://doi.org/10.1021/la203155d

Stepien, M., Saarinen, J. J., Teisala, H., Tuominen, M., Aromaa, M., Kuusipalo, J., ... Toivakka, M. (2012). Surface chemical analysis of photocatalytic wettability conversion of TiO2 nanoparticle coating. Surface and Coatings Technology, 208, 73-79. https://doi.org/10.1016/j.surfcoat.2012.08.008

Stepien, M., Saarinen, J. J., Teisala, H., Tuominen, M., Aromaa, M., Kuusipalo, J., ... Toivakka, M. (2012). Surface chemical characterization of nanoparticle coated paperboard. Applied Surface Science, 258(7), 3119-3125. https://doi.org/10.1016/j.apsusc.2011.11.048

Gonzalez, J. A., Tarao, H., & Korpinen, L. (2012). The Effect of ELF electric fields on Implantable Cardioverter Defibrillators (ICD). teoksessa The Bioelectromagnetics Society 34th Annual Meeting, June 17, 2012 - June 22, 2012, Brisbane, Australia (Sivut 104-106). (The Bioelectromagnetics Society Annual Meeting). The Bioelectromagnetics Society.

Johansson, K., Christophliemk, H., Johansson, C., Jönsson, L. J., & Järnström, L. (2012). The effects of coating structure and water-holding capacity on the oxygen-scavenging capacity of enzymes embedded in the coating layer. teoksessa 12th TAPPI Advanced Coating Fundamentals Symposium Proceedings, September 10-12, 2012, Atlanta, USA (Sivut 57-69). (TAPPI Advanced Coating Fundamentals Symposium). TAPPI.

Bollström, R., Tuominen, M., Määttänen, A., Peltonen, J., & Toivakka, M. (2012). Top layer coatability on barrier coatings. Progress in Organic Coatings, 73(1), 26-32. https://doi.org/10.1016/j.porgcoat.2011.08.015

Lahtinen, K., Johansson, P., Kääriäinen, T., Maydannik, P., Cameron, D., & Kuusipalo, J. (2012). Toward more controlled, nanoscale barrier layers in packaging. Plastics Research Online, (17th August), 1-3. https://doi.org/10.2417/spepro.004237

Haapanen, J., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., Saarinen, J. J., ... Mäkelä, J. M. (2012). Two-component aerosol nanoparticle coating for paperboard on roll-to-roll process. teoksessa EAC-2012 Granada, European Aerosol Conference, 2-7 Sept 2012, Granada, Spain (Sivut 1-1). (European Aerosol Conference EAC). EAA, AECTA.

Teisala, H., Tuominen, M., & Kuusipalo, J. (2011). Adhesion Mechanism of Water Droplets on Hierarchically Rough Superhydrophobic Rose Petal Surface. Journal of Nanomaterials, 2011, 1-6. [818707]. https://doi.org/10.1155/2011/818707

Lahti, J., Eiroma, K., Tenhunen, T-M., Pykönen, M., Toivakka, M., & Tuominen, M. (2011). Atmospheric Plasma Treatment of Plastic Packaging Film: Effects on Surface Properties and UV Inkjet Printability. teoksessa 13th TAPPI European PLACE Conference, Bregenz, Austria, 30 May - 1 June, 2011 (Sivut 1-31). (TAPPI European PLACE Conference). Norcross, GA: TAPPI.

Kääriäinen, T. O., Maydannik, P., Cameron, D. C., Lahtinen, K., Johansson, P., & Kuusipalo, J. (2011). Atomic layer deposition on polymer based flexible packaging materials: Growth characteristics and diffusion barrier properties. Thin Solid Films, 519(10), 3146-3154. https://doi.org/10.1016/j.tsf.2010.12.171

Aromaa, M., Haapanen, J., Teisala, H., Tuominen, M., Kuusipalo, J., Stepien, M., ... Mäkelä, J. (2011). Deposition of flame synthesised nanoparticles on paperboard surface. teoksessa NOSA & FAAR 2011, Nordic Aerosol Symposium, November 9-11, 2011, Tampere, Finland (Sivut 17-17). (Nordic Aerosol Symposium NOSA & FAAR). Tampere: Nordic Society for Aerosol Research.

Tuominen, M., Lahti, J., & Kuusipalo, J. (2011). Effects of flame and corona treatment on extrusion coated paper properties. TAPPI Journal, 10(10), 29-36.

Mäkelä, J. M., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., Saarinen, J. J., ... Kuusipalo, J. (2011). Nanoparticle Deposition from Liquid Flame Spray onto Moving Roll-to-Roll Paperboard Material. Aerosol Science and Technology, 45(7), 827-837. https://doi.org/10.1080/02786826.2011.566292

Lahti, J., & Lavonen, J. (2011). Nanoscale Surface Processing of Extrusion Coated Substrates and Plastic Films with Atmospheric Plasma Activation and Deposition. teoksessa M. Vähä-Nissi (Toimittaja), Novel nanostructured polymeric materials for food packaging and beyond, International COST Workshop, Espoo, Finland, September 15-16, 2011. VTT Symposium (Sivut 29-30). (International COST Workshop; Vuosikerta 270). Espoo: VTT.

Tuominen, M. (2011). The name of the thesis: Atmospheric Plasma Treatment in Extrusion Coating, Topic: The Effect of Flame Treatment on the Sealability of Extrusion Coated Paper. teoksessa S. Kärkkäinen (Toimittaja), PaPSaT, International Doctoral Programme in Pulp and Paper Science and Technology in Finland, Yearbook 2011 (Sivut 1-5). Espoo: Aalto University School of science and technology.

Bollström, R., Tuominen, M., Määttänen, A., Peltonen, J., & Toivakka, M. (2011). Top layer coatability on barrier coatings. teoksessa TAPPI’s PaperCon 2011, May 1-4, 2011, Covington, KY, USA. Paper 360 - Special PaperCon Edition (Sivut 1-11). (TAPPI International Conference Papercon). Norcross, GA: TAPPI.

Lahtinen, K., Maydannik, P., Johansson, P., Kääriäinen, T., Cameron, D. C., & Kuusipalo, J. (2011). Utilisation of continuous atomic layer deposition process for barrier enhancement of extrusion-coated paper. Surface and Coatings Technology, 205(15), 3916-3922. https://doi.org/10.1016/j.surfcoat.2011.02.009

Johansson, P., Lahtinen, K., Kuusipalo, J., Kääriäinen, T., Maydannik, P., & Cameron, D. (2010). Atomic layer deposition process for barrier applications of flexible packaging. teoksessa TAPPI 2010 PLACE Conference, April 18-21, 2010, Albuquerque NM, USA (Sivut 1-12)

Vartiainen, J., Tuominen, M., & Nättinen, K. (2010). Bio-Hybrid Nanocomposite Coatingas from Sonicated Chitosan and Nanoclay. Journal of Applied Polymer Science, 116(6), 3638-3647. https://doi.org/10.1002/app.31922

Markert, F., Breedveld, L., Lahti, J., & Vangeneugden, D. (2010). Development of sustainable paper coatings using nanoscale industrial. teoksessa i-SUP 2010, Innovation for Sustainable Production, Conference 4, Materials for Sustainable Production, Bruges, Belgium, 18-21 April, 2010 (Sivut 80-84)

Honkanen, M., Eloranta, H., & Saarenrinne, P. (2010). Digital imaging measurement of dense multiphase flows in industrial processes. Flow Measurement and Instrumentation, 21(1), 25-32. https://doi.org/10.1016/j.flowmeasinst.2009.11.001

Larkomaa, J., Niinimäki, J., Honkanen, M., Hanif, M., & Saarenrinne, P. (2010). Effect of fibre properties on flocculation and fractionation of cellulosic fibres in dry state. Journal of Engineered Fibers and Fabrics, 5(1), 1-10.

Johansson, K., Christophliemk, H., Jönsson, L. J., & Järnström, L. (2010). Effect of Pigment Volume Concentration and Drying Aspects on the Enzyme Activity of Clay Coatings. teoksessa 11th Advanced Coating Fundamentals Symposium Proceedings, The Latest Advances in Coating Research and Development, 11-13 October 2010, Munich, Germany (Sivut 129-143). (TAPPI Advanced Coating Fundamentals Symposium). USA: TAPPI Press.

Peltola, J., Kallio, S., Honkanen, M., & Saarenrinne, P. (2010). Image based measurement of particle phase reynolds stresses in a laboratory scale circulating fluidized bed. teoksessa 7th International Conference on Multiphase Flow ICMF2010, May 30 - June 4, 2010, Tampa, Florida (Sivut 1-9)

Lahti, J., Eiroma, K., Tenhunen, T-M., Pykönen, M., & Toivakka, M. (2010). Influence of Atmospheric Plasma Treatment on Surface Properties and Inkjet Printability of Plastic Packaging Film. teoksessa N. Enlund, & M. Lovrecek (Toimittajat), Advances in Printing and Media Technology (Sivut 197-203)

Tuominen, M. (2010). The name of the thesis: Surface Treatment in Extrusion Coating, Topic: The Influence of Corona and Flame Treatment on Sealability of Extrusion Coated Paper. teoksessa S. Kärkkäinen (Toimittaja), PaPSaT, International Doctoral Programme in Pulp and Paper Science and Technology in Finland, Yearbook 2010 (Sivut 1-5)

Honkanen, M., Jung, J., Kuo, C. J., Peles, Y., & Amitay, M. (2010). Two-phase PIV/PTV measurement of bubbly flow across pin fins in a micro-channel. teoksessa 7th International Conference on Multiphase Flow ICMF2010, May 30 - June 4, 2010, Tampa, Florida (Sivut 1-9)