Viheriälä, Jukka et al. "1180 nm GaInNAs quantum well based high power DBR laser diodes". Zediker, Mark S. (toim.). High-Power Diode Laser Technology XV. Proceedings of SPIE. SPIE. 2017. https://doi.org/10.1117/12.2251317

Kantola, Emmi et al. "1180nm VECSEL with 50 W output power". Proceedings of SPIE - The International Society for Optical Engineering. SPIE. 2015. https://doi.org/10.1117/12.2079480

Viheriälä, Jukka et al. "1.3μm U-bend traveling wave SOA devices for high efficiency coupling to silicon photonics". ja Reed, Graham T. Knights, Andrew P. (toimittaneet). Silicon Photonics XIV. Proceedings of SPIE - The International Society for Optical Engineering. SPIE, IEEE. 2019. https://doi.org/10.1117/12.2505935

Mereuta, Alexandru et al. "1.55-μm wavelength wafer-fused OP-VECSELs in flip-chip configuration". Keller, Ursula (toim.). Vertical External Cavity Surface Emitting Lasers (VECSELs) IX. Proceedings of SPIE - The International Society for Optical Engineering. SPIE, IEEE. 2019. https://doi.org/10.1117/12.2508342

Niemi, Henry et al. "1800-luvun Helsingin kadonneiden konserttitilojen akustiikan mallintaminen". Akustiikkapäivät 2015. Akustiikkapäivät. Kuopio. 2015, 77-82.

Schwarz, Sebastian et al. "2D Video Coding of Volumetric Video Data". 2018 Picture Coding Symposium, PCS 2018 - Proceedings. IEEE. 2018, 61-65. https://doi.org/10.1109/PCS.2018.8456265

Fakour-Sevom, Vida, Esin Guldogan, ja Joni-Kristian Kämäräinen "360 panorama super-resolution using deep convolutional networks". VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications . SCITEPRESS. 2018, 159-165. https://doi.org/10.5220/0006618901590165

Yadav, Amit et al. "405-nm pumped Ce 3+ -doped silica fiber for broadband fluorescence from cyan to red". ja Digonnet, Michel J. F. Jiang, Shibin (toimittaneet). Optical Components and Materials XVI. Proceedings of SPIE - The International Society for Optical Engineering. SPIE, IEEE. 2019. https://doi.org/10.1117/12.2509599

Kantola, E. et al. "50 W VECSEL emitting at 1180 nm". 2015 Conference on Lasers and Electro-Optics Europe - European Quantum Electronics Conference, 21.-25.6. Munich, Germany: CB_3_1. OSA. 2015.

Kähkönen, Kalle, toim. "8th Nordic Conference on Construction Economics and Organization". Procedia Economics and Finance. 2015. 21.

Saarinen, Esa J. et al. "A 1.5-W frequency doubled semiconductor disk laser tunable over 40 nm at around 745 nm". Proceedings of SPIE: Vertical External Cavity Surface Emitting Lasers (VECSELs) VI. Spie conference proceedings. SPIE. 2016. https://doi.org/10.1117/12.2209384

Jussila, Jari J. et al. "A bibliometric study on authorship trends and research themes in knowledge management literature". 12th International Forum on Knowledge Asset Dynamics, St. Petersburg, Russia 7-9 June 2017: Knowledge Management in the 21th Century: Resilience, Creativity and Co-creation. St. Petersburg, Russia. 2017, 389-397.

Laukkarinen, Teemu Abstracting Application Development for Resource Constrained Wireless Sensor Networks Tampere University of Technology. Publication. Tampere: Tampere University of Technology. 2015.

Galinina, Olga et al. "A Capacity Bound for mmWave-based Channel Access in Ultra-Dense Wearable Deployments". 2015 7th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). IEEE. 2015, 298-304. https://doi.org/10.1109/ICUMT.2015.7382446

Drossos, Konstantinos et al. "Accessible Games for Blind Children, Empowered by Binaural Sound". Proceedings of the 8th ACM International Conference on PErvasive Technologies Related to Assistive Environments. PETRA '15. New York, NY, USA: Association for Computing Machinery (ACM). 2015, 5:1-5:8. https://doi.org/10.1145/2769493.2769546

Davidson, P., J. P. Raunio, ja R. Piché "Accurate depth estimation from a sequence of monocular images supported by proprioceptive sensors". 23rd Saint Petersburg International Conference on Integrated Navigation Systems, ICINS 2016 - Proceedings. State Research Center of the Russian Federation. 2016, 249-257.

Messo, Tuomas et al. "Accurate impedance model of grid-connected inverter for small-signal stability assessment in high-impedance grid". IEEJ JOURNAL OF INDUSTRY APPLICATIONS. 2019. 8(3). https://doi.org/10.23919/IPEC.2018.8507573

Huhtelin, Mervi ja Suvi Nenonen. "A Co-creation Centre for University–Industry Collaboration – A Framework for Concept Development". Procedia Economics and Finance. 2015, 21. 137 - 145. https://doi.org/10.1016/S2212-5671(15)00160-4

Vehmas, Risto et al. "A computationally feasible optimization approach to inverse SAR translational motion compensation". Proceedings of the 12th European Radar Conference (EuRAD 2015). IEEE. 2015, 17-20. https://doi.org/10.1109/EuRAD.2015.7346226

Kauppila, Petteri et al. "A continuum damage model for creep fracture and fatigue analyses". 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy. Procedia Structural Integrity. 2016, 887–894. https://doi.org/10.1016/j.prostr.2016.06.114

Aldawood, Sarah et al. "A coordination-based brokerage architecture for multi-cloud resource markets". Proceedings - 2016 4th International Conference on Future Internet of Things and Cloud Workshops, W-FiCloud 2016. Institute of Electrical and Electronics Engineers Inc. 2016, 7-14. https://doi.org/10.1109/W-FiCloud.2016.19

Stepanova, Ekaterina, Ilya Kudryavtsev, ja Elena-Simona Lohan. "Acquisition of E5 Galileo signals in Matlab". Procedia Engineering. 2015, 104. 36-42. https://doi.org/10.1016/j.proeng.2015.04.094

Chaudhary, Sunil et al. "A Cross-Cultural and Gender-Based Perspective for Online Security: Exploring Knowledge, Skills and Attitudes of Higher Education Students.". IADIS International Journal on WWW/Internet. 2015, 13(1). 57-71.

Georgiev, Georgi Yordanov et al. "Action and power efficiency in self-organization: The case for growth efficiency as a cellular objective in escherichia coli"., Flores Martinez, Claudio L. ja Georgiev, Georgi Yordanov Smart, John M. Price, Michael E. (toimittaneet). Evolution, Development and Complexity - Multiscale Evolutionary Models of Complex Adaptive Systems. Springer Proceedings in Complexity. Springer. 2019, 229-244. https://doi.org/10.1007/978-3-030-00075-2_8

Voronin, V. et al. "Action recognition using the 3D dense microblock difference". Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies II. Proceedings of SPIE. SPIE. 2018. https://doi.org/10.1117/12.2326801

Köliö, Arto, Jukka Lahdensivu, ja Matti Pentti "Active corrosion phase as a service life extension of concrete facades". Proceedings of the Eurocorr 2015, European corrosion congress. Austrian Society for Metallurgy and Materials (ASMET); EFC; DECHEMA. 2015.

Martinsuo, Miia ja Lauri Vuorinen "Actors’ agency in the routines of innovation project portfolio management". Proceedings of the EURAM European Academy of Management Conference 2019: 26-28 June 2019, Lisbon, Portugal. EURAM conference. European Academy of Management, EURAM. 2019.

Ketonen-Oksi, Sanna "Adapting service-based working culture as the key driver for organisational creativity and innovation". Towards a new architecture of knowledge : Big Data, culture and creativity: IFKAD 2016-11th International Forum on Knowledge Asset Dynamics, Dresden 15-17.6.2016, Germany. 2016.

M. Aref, Mohammad et al. "Adaptive Feedback in Local Coordinates for Real-time Vision-Based Motion Control Over Long Distances". International Conference on Robotics and Mechantronics : (ICRoM 2017). IOP conference series : materials science and engineering. IOP Publishing Ltd. 2018. https://doi.org/10.1088/1757-899X/320/1/012009

Habib, Muhammad et al. "Adaptive fuzzy inference system based directional median filter for impulse noise removal". AEU International Journal of Electronics and Communication. 2016, 70(5). 689-697. https://doi.org/10.1016/j.aeue.2016.02.005

Matikainen, Ville et al. "Advanced coatings by novel high-kinetic thermal spray processes". Materia. 2015, 73(1). 46-50.

Ketonen-Oksi, Sanna ja Harri Jalonen "Advocator, jester, spokesperson, provocateur and boundary spanner? Exploring different communication styles at twitter". 12th Conference proceedings of IFKAD2017: St.Petersburg, Russia, 7-9 June 2017. Proceedings IFKAD. 2017.

Lenarduzzi, Valentina et al. "A dynamical quality model to continuously monitor software maintenance". Proceedings of the 11th European Conference on Information Systems Management, ECISM 2017. Academic Conferences and Publishing International Limited. 2017, 168-178.

Yli-Fossi, Timo ja Risto Kuusisto "A dynamic paper machine simulator for testing of model predictive control applications". Proceedings of AutomaatioXXI seminaari. SAS julkaisusarja; 42. Suomen Automaatioseura ry. 2015, 1-6.

Helander, N. et al. "Affective experiences and student engagement in higher education". 44th Annual Conference Of The European Society For Engineering Education: 12-15 September 2016, Tampere, Finland. Tampere. 2016.

Vainio, Ville V. ja Antti Pulkkinen "A follow-up case study of the relation of PLM Architecture, Maturity and Business processes". Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. IFIP Advances in Information and Communication Technology. Springer New York LLC. 2016, 867-873. https://doi.org/10.1007/978-3-319-33111-9_79

Ahola, Tuomas, Matias Ståhle, ja Miia Martinsuo "Agency relationships in global project business". Proceedings of EURAM18 European Academy of Management conference 2018. EURAM conference. European Academy of Management, EURAM. 2018.

Stormi, Kati , Teemu Laine, ja Tuomas Korhonen "Agile methods in performance management system development process". 10th Conference On New Directions In Management Accounting, Brussels, Belgium, December 14-16, 2016. 2016.

Leivo, Virpi et al. "Air pressure difference between indoor and outdoor or staircase in multi-family buildings with exhaust ventilation system in Finland". Energy Procedia. 2015, 78C. 1218-1223. https://doi.org/10.1016/j.egypro.2015.11.188

Hongisto, Valtteri, Mikko Kylliäinen ja Jukka Hyönä "ÄKK-hankkeen suositukset tulevaisuuden ääneneristysmääräyksiä koskien". Rakennusfysiikka 2015. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015, 561-566.

Salo, Juha, Petteri Huttunen, ja Juha Vinha "Alipaineistetun tuulettuvan ryömintätilan rakennusfysikaaliset FEM-simuloinnit". ja Vinha, Juha Kivioja, Henna (toimittaneet). Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24-26.10.2017, Tampere. Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka. . Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017, 413-422.

Rojas, Vania et al. "Alkyl thiophene vinylene electropolymerization in C8mimPF6, potential use in solar cells". Materials Sciences and Applications. 2017, 8(5). 405-417. https://doi.org/10.4236/msa.2017.85013

Kerst, Thomas ja Juha Toivonen "Alpha radiation induced luminescence in solar blind spectral region". CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_AT.2018.ATh4O.8

Nisula, Jaakko ja Arto Saari "Aluetehokkuuden kustannusvaikutukset". Nollaa parempi – Townhouse energiatehokkaassa asuinrakentamisessa. Aalto University publication series Crossover; 9/2015. Aalto-yliopisto. 2015, 102-107.

Nykänen, Lasse, Erika Kallionpää, ja Heikki Liimatainen Älykäs kaupunkilogistiikka – CityLog Tampereen teknillinen yliopisto. Liikenteen tutkimuskeskus Verne. Tutkimusraportti. Tampereen teknillinen yliopisto. Liikenteen tutkimuskeskus Verne. 2015.

Van Mellaert, R. et al. "A mixed-integer linear programming approach for global discrete size optimization of frame structures". ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering: Crete; Greece; 5 June 2016 through 10 June 2016. National Technical University of Athens. 2016, 3395-3408.

Salpavaara, Timo ja Jukka Lekkala "A model based analysis of the measurement errors in inductively coupled passive resonance sensors". Holub, Jan (toim.). IMEKO XXI World Congress, Proceedings, August 30 - September 4, 2015, Prague, Czech Republic. 2015.

Belahcen, Anouar et al. "A model for anisotropic magnetostriction". Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry. 2015, 201-203.

Jääskeläinen, Aki, Virpi Sillanpää, ja Nina Helander "A model for profiling information and knowledge management in the public sector". Proceedings of 14th IFKAD 2019 conference: Matera, Italy, 5-7 June. . Proceedings IFKAD. 2019.

Aapro, Aapo, Tuomas Messo, ja Teuvo Suntio "An accurate small-signal model of a three-phase VSI-based photovoltaic inverter with LCL-filter". 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia). 2015, 2267-2274. https://doi.org/10.1109/ICPE.2015.7168092

Ho-Van, Khuong et al. "Analysis of Cognitive Cooperative Networks with Best Relay Selection and Diversity Reception". 2015 International Conference on Advanced Technologies for Communications (ATC). IEEE. 2015, 651-656. https://doi.org/10.1109/ATC.2015.7388412

Peng, Zhe et al. "Analysis of Crowdsensed WiFi Fingerprints for Indoor Localization". Proceedings of the 21st Conference of Open Innovations Association FRUCT. Helsinki, Finland: FRUCT. 2017, 268-277.

Sheikh, Muhammad Usman ja Jukka Lempiainen. "Analysis of outdoor and indoor propagation at 15 GHz and millimeter wave frequencies in microcellular environment". Advances in Science, Technology and Engineering Systems. 2018, 3(1). 160-167. https://doi.org/10.25046/aj030120

Alexandru, Rusu Casandra ja Elena-Simona Lohan "Analysis of Real Mobility Records in Urban and Suburban Environments". 26TH DAAAM International Symposium on Intelligent Manufacturing and Automation. DAAAM International. 2016, 0688-0692. https://doi.org/10.2507/26th.daaam.proceedings.094

Laitinen, Jouko ja Arto Niemi "Analysis of the aircraft operational reliability research series: From statistical models to avionics data monitoring". Proceedings of the 9th World congress on engineering asset management (WCEAM 2014), Pretoria, South Africa 28-31 Oct, 2014. 2015.

Fedotov, Andrei et al. "Analysis of upconversion nanoparticles as an active medium for upconversion light sources". Proceedings of SPIE: Optical Components and Materials XVI. Proceedings of SPIE : the International Society for Optical Engineering. S P I E - International Society for Optical Engineering. 2019. https://doi.org/10.1117/12.2507599

Monakhov, Dmitrii et al. "Analysis of User Exploration Patterns during Scene Cuts in Omnidirectional Videos". SMPTE 2018. SMPTE. 2018. https://doi.org/10.5594/M001845

Kerminen, Riitta, Chenlu Wang, ja Ari Visa "Analysis on bus travel time through traffic light intersection". ITS World Congress 2015 Proceedings: Towards Intelligent Mobility – Better Use of Space. 2015.

Yaghoubi, Saba Tahaei et al. "An anisotropic continuum damage model for concrete"., Kouhia, Reijo ja Mäkinen, Jari Pajunen, Sami Saksala, Timo (toimittaneet). Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Rakenteiden Mekaniikan Seura ry. 2015, 51.

Varheenmaa, Minna "A new generation sweating thermal manikin for the evaluation of the thermal comfort of protective clothing in Arctic Conditions". ja Konola, Sanna Kähkönen, Päivi (toimittaneet). Arctic Wears - Perspectives on Arctic Clothing. Liiketoiminta ja yrittäjyys Sarja B. Raportit ja selvitykset 10/2015. Lapland University of Applied Sciences. 2015, 154-161.

Lampio, Kaj ja Reijo Karvinen "A new method to calculate natural convection heat transfer from a non-isothermal fin array". ja Neshumayev, Dmitri Sunden, Bengt (toimittaneet). Proceedings of the 7th Baltic Heat Transfer Conference, August 24-26 2015, Tallinn Estonia. Baltic Heat Transfer Conference BHTC. Tallinn: Tallinn University of Technology. 2015.

Alberucci, Alessandro et al. "A new waveguiding mechanism based upon geometric phase". Frontiers in Optics 2016. Optical Society of America (OSA). 2016.

Suojanen, Marko et al. "An example of scenario-based evaluation of military capability areas An impact assessment of alternative systems on operations". 9th Annual IEEE International Systems Conference, SysCon 2015 - Proceedings. The Institute of Electrical and Electronics Engineers, Inc. 2015, 601-607. https://doi.org/10.1109/SYSCON.2015.7116817

Mardoukhi, Ahmad et al. "An experimental and numerical study of the dynamic Brazilian disc test on Kuru granite". Proceedings of the XII Finnish Mechanics Day. 2015, 210-215.

Rivero-Rodriguez, Alejandro, Paolo Pileggi ja Ossi Nykänen "An Initial Homophily Indicator to Reinforce Context-Aware Semantic Computing". 7th International Conference on Computational Intelligence, Communication Systems and Networks (CICSyN). International Conference on Computational Intelligence, Communications and Networks. Riga: IEEE. 2015, 89-93. https://doi.org/10.1109/CICSyN.2015.26

Nurminen, Henri et al. "A NLOS-robust TOA positioning filter based on a skew-t measurement noise model". 2015 International Conference on Indoor Positioning and Indoor Navigation (IPIN). IEEE. 2015, 1-7. https://doi.org/10.1109/IPIN.2015.7346786

Krogerus, Tomi et al. "Anomaly Detection and Diagnostics of a Wheel Loader Using Dynamic Mathematical Model and Joint Probability Distributions". Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. The Scandinavian International Conference on Fluid Power. Tampere University of Technology. Department of Intelligent Hydraulics and Automation. 2015.

Kivimäki, Jyri ja Teuvo Suntio "Appearance of a Drift Problem in Variable-step Perturbative MPPT Algorithms". 31st European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC). 2015, 1602-1608. https://doi.org/10.4229/EUPVSEC20152015-5AO.9.2

Devillers, Raymond ja Antti Valmari, toim. Application and Theory of Petri Nets and Concurrency: 36th International Conference, PETRI NETS 2015 Brussels, Belgium, June 21-26, 2015 Proceedings Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Springer Verlag. 2015. https://doi.org/10.1007/978-3-319-19488-2

Lau Sarmiento, Alvaro et al. "Application of terrestrial LiDAR and modelling of tree branching structure for plant- scaling models in tropical forest trees". Proceedings of SilviLaser 2015: 14th conference on Lidar Applications for Assessing and Managing Forest Ecosystems. 2015, 96-98.

Saari, M., T. Mäkinen, ja P. Linna "Applying third-party moocs in programming education: a case study". 9th International Conference on Education and New Learning Technologies: 3-5 July, 2017 Barcelona, Spain. Barcelona, Spain: IATED. 2017, 53-59. https://doi.org/10.21125/edulearn.2017.1014

Ferrer, B. R. "A Proposal of Decentralized Architecture for OKD-MES"., Strzelczak, S. ja Balda, Pavel Garetti, Marco Lobov, Andrei (toimittaneet). Open Knowledge-Driven Manufacturing & Logistics: The eScop Approach. Warsaw: Warsaw University of Technology Publishing House. 2015, 331-340.

Tewfik, Magdy ja Alia'a Amr. "Arbitrary Land Use Policy in Jordan between Legal Brand and Property Control". European International Journal of Science and Technology. 2014, 3(9). 86-93.

Taibi, Davide, Valentina Lenarduzzi ja Claus Pahl "Architectural patterns for microservices: A systematic mapping study". CLOSER 2018 - Proceedings of the 8th International Conference on Cloud Computing and Services Science. SCITEPRESS. 2018, 221-232. https://doi.org/10.5220/0006798302210232

Passinmäki, Pekka . "Architecture beyond signs and symbols : Zumthor's response to the problems of aesthetics". ARQ-Architectural Research Quarterly. 2016, 19(4). 325-328. https://doi.org/10.1017/S1359135516000038

Iarovyi, Sergii et al. "Architecture for Open, Knowledge-Driven Manufacturing Execution System". Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth. Springer. 2015, 519-527. https://doi.org/10.1007/978-3-319-22759-7_60

Takala, Annina ja Kati Korhonen-Yrjänheikki "Are Finns walking the talk? : Examining the national collaboration process on engineering education for sustainable development five years later". Conference on Engineering Education for Sustainable Development (7th : 2015 : Vancouver, B.C.). 2015. https://doi.org/10.14288/1.0064702

El-Khozondar, Hala et al. "A review study of photovoltoltaic array maximum power point tracking algorithms". Renewables: Wind, Water, and Solar. 2016. 3(1). https://doi.org/10.1186/s40807-016-0022-8

Tartia, Jani . "Arkinen liikkuminen kontekstina kaupunkitilan tarkasteluun". Versus. 2015.

Silverajan, B., Hanning Zhao ja Arjun Kamath "A Semantic Meta-Model Repository for Lightweight M2M". 2018 IEEE International Conference on Communication Systems, ICCS 2018. IEEE. 2019, 468-472. https://doi.org/10.1109/ICCS.2018.8689185

Jääskeläinen, Aki, Holger Schiele, ja Leena Aarikka-Stenroos "A social capital perspective on gaining optimal solutions from suppliers as preferred customer". Academy of Management Proceedings. 1 udg., Academy of Management Proceedings; 1. Academy of Management AOM. 2018. https://doi.org/10.5465/AMBPP.2018.16278abstract

Drossos, Konstantinos et al. "A Socially-Intelligent Multi-Robot Service Team for In-Home Monitoring". Information, Intelligence, Systems and Applications, IISA 2014, The 5th International Conference on. IEEE. 2014, 159-164. https://doi.org/10.1109/IISA.2014.6878763

Nisula, Karoliina ja Samuli Pekkola "Assessing business learning by analysing ERP simulation log files". AIS SIGED 2016 Conference on IS education and Research. : Dublin, Ireland, December 10-11, 2016. Dublin. 2016.

Gómez-Herrero, Germán et al. "Assessing coupling dynamics from an ensemble of time series". Entropy. 2015, 17(4). 1958-1970. https://doi.org/10.3390/e17041958

Saari, Ulla et al. "Assessing the usefulness of an early idea development tool among experienced researchers". CERN IdeaSquare Journal of Experimental Innovation. 2017, 1(2). 3-8. https://doi.org/10.23726/cij.2017.476

Einolander, Jarno ja Hannu Vanharanta "Assessment of student retention using the Evolute approach, an overview". 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015. Procedia Manufacturing. Elsevier. 2015, 581–586. https://doi.org/10.1016/j.promfg.2015.07.269

Grigonyte, J. et al. "A study of a condensing heat exchanger and electrostatic precipitator combination for small-scale wood combustion". European Aerosol Conference 2015: EAC 2015, Milan, Italy. 2015.

D'Ignazio, Marco, Bruno Di Buo, ja Tim Länsivaara "A study on the behaviour of the weathered crust in the Perniö failure test". Proceedings of the XVI ECSMGE 2015: 13-17 September 2015 - Edinburgh, Geotechnical Engineering for Infrastructure and Development. ICE Publishing. 2015, 3639-3644.

Kylliäinen, Mikko et al. "Asuinhuoneistojen betonivälipohjien askelääneneristyksen subjektiivinen ja objektiivinen arviointi". Akustiikkapäivät 2015. Akustiikkapäivät. Kuopio: Akustinen seura. 2015, 204-207.

Lohan, Elena-Simona, Tomi Kauppinen ja Sree Bash Chandra Debnath "A Survey of People Movement Analytics Studies in the Context of Smart Cities". Proceedings of the FRUCT’19. 2016, 151-158. https://doi.org/10.23919/FRUCT.2016.7892195

Prudanov, Anton et al. "A trial of yoking-proof protocol in RFID-based smart-home environment". Distributed Computer and Communication Networks - 19th International Conference, DCCN 2016, Revised Selected Papers. Communications in Computer and Information Science. Springer Verlag. 2016, 25-34. https://doi.org/10.1007/978-3-319-51917-3_3

Heinimäki, Teemu J. ja Tapio Elomaa "Augmenting Technology Trees: Automation and Tool Support". Proceedings of the Seventh International Conference on Virtual Worlds and Games for Serious Applications (VS-Games 2015). IEEE. 2015, 68-75. https://doi.org/10.1109/VS-GAMES.2015.7295765

Kouhia, Reijo et al. A unified lcf-hcf model based on continuum mechanics. 2016. 4 s.

Pöllänen, Markus ja Lasse Nykänen "Automated driving and the key megatrends of future". ITS European Congress: 10th ITS EUROPEAN CONGRESS, Helsinki, Finland 16-19 June 2014. 2014.

Halbach, Eric, Antti Kolu, ja Reza Ghabcheloo "Automated pile transfer work cycles with a robotic wheel loader"., Mela, K. Pajunen, S. Raasakka, V. (toimittaneet). 17th International Conference on Computing in Civil and Building Engineering (ICCCBE): Tampere, 5-7 June 2018. Tampere, Finland: RIL. 2018.

Mimilakis, Stylianos - Ioannis et al. "Automated Tonal Balance Enhancement for Audio Mastering Applications". Audio Engineering Society Convention 134. AES Audio Engineering Society. 2013.

Zare, Marzieh et al. "Automatic Classification of Z-ring Formation Stages at the Single Cell Level in Escherichia Coli by Machine Learning"., Silveira, M ja Fred, A Gamboa, H Vaz, M (toimittaneet). Proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies, Vol 2: Bioimaging. SCITEPRESS. 2017, 72-76.

Kanerva, M. et al. "Automatization and stress analysis data of CoCr laser weld fatigue tests". Data in Brief. 2019. 26. https://doi.org/10.1016/j.dib.2019.104374

Fouladi, Arash et al. "A Variable Battery Supply DC-DC Buck Converter Designed for 45nm-CMOS Technology". 2016 IEEE Canadian Conference on Electrical and Computer Engineering (CCECE), Vancouver, May 15-18, 2016.. 2016. https://doi.org/10.1109/CCECE.2016.7726839

Lehtonen, V. ja T. Länsivaara "Back-calculation of the Saint-Alban A test embankment with a new modelling approach in LEM". Proceedings of the The 17th Nordic Geotechnical Meeting, Reykjavik Iceland: 25th - 28th of May 2016. 2016, 691-699.

Salo, Kari, Diana Giova ja Tommi Mikkonen "Backend infrastructure supporting audio augmented reality and storytelling". Human Interface and the Management of Information: Applications and Services: 18th International Conference, HCI International 2016 Toronto, Canada, July 17-22, 2016. Proceedings, Part II. Lecture Notes in Computer Science. Springer Verlag. 2016, 325-335. https://doi.org/10.1007/978-3-319-40397-7_31

Bautista, Godofredo S. et al. "Background-Free Second-Harmonic Generation Microscopy of Individual Carbon Nanotubes". Nonlinear Optics 2015: Kauai, Hawaii United States 26–31 July 2015. Nonlinear Optics Conference Series. OSA. 2015. https://doi.org/10.1364/NLO.2015.NW1A.5

Värri, Alpo "Balancing Expectations to the Health Software Production Process Standard". The 3rd International Virtual Research Conference In Technical Disciplines. RCITD - Proceedings in Research Conference in Technical Disciplines. 2015. https://doi.org/10.18638/rcitd.2015.3.1.71

Laitinen, Arttu et al. "Barkhausen noise Potcore sensor simulations with Comsol". 12th International Conference on Barkhausen Noise and Micromagnetic Testing. ICBM. 2017, 97-107.

Tariq, Ali Bin "Beaconing in a highway scenario: Vulnerable vehicles problem". Proceedings of the 11th Conference of Open Innovations Association FRUCT, FRUCT 2012. IEEE. 2012, 169-175. https://doi.org/10.23919/FRUCT.2012.8253122

Drossos, K., A. Floros ja Andreas Giannakoulopoulos "BEADS: A dataset of Binaural Emotionally Annotated Digital Sounds". Information, Intelligence, Systems and Applications, IISA 2014, The 5th International Conference on. IEEE. 2014, 158-163. https://doi.org/10.1109/IISA.2014.6878749

Michele Felicetti, Alberto et al. "Being a start-upper in Italy: Motivations, obstacles and success factors". Proceedings of the 11th forum on knowledge asset dynamics: Towards a new architecture of knowledge: big data, culture and creativity. Dresden. 2016, 1370-1383.

Viheriäkoski, Toni et al. "Benchmarking of Factory Level ESD Control". Electrical Overstress/Electrostatic Discharge Symposium Proceedings 2015. USA: IEEE COMPUTER SOC. 2015. https://doi.org/10.1109/EOSESD.2015.7314769

Zakeri, Faezeh Sadat et al. "Benchmarking of several disparity estimation algorithms for light field processing"., Bazeille, Stephane Verrier, Nicolas Cudel, Christophe (toimittaneet). Fourteenth International Conference on Quality Control by Artificial Vision. Proceedings of SPIE - The International Society for Optical Engineering. SPIE, IEEE. 2019. https://doi.org/10.1117/12.2521747

Ojala, Mika ja Tommi Mahlamäki "Benefits of digitally guided buying in B2B markets". 25th annual IPSERA Conference: Dortmund, Sunday 20 March - Wednesday 23 March 2016. Dortmund. 2016.

Vänttinen, Kari, Eero Tuominen, ja Juha Vinha "Betonin kosteusteknisten materiaaliominaisuuksien määrittäminen". ja Vinha, Juha Kivioja, Henna (toimittaneet). Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017, 461-470.

Ratia, Milla ja Jussi Myllärniemi "Beyond ic 4.0 : the future potential of bi-tool utilization in the private healthcare". 13th International Forum on Knowledge Asset Dynamics, IFKAD 2018: Delft, Netherlands, 4-6 July 2018. Proceedings IFKAD. 2018.

Kekonen, Atte et al. "Bioimpedance measurement system for evaluation of the status of wound healing". 2016 15th Biennial Baltic Electronics Conference (BEC) . IEEE. 2016, 175-178. https://doi.org/10.1109/BEC.2016.7743757

Naumenko, V. et al. "Bispectrum-based demodulation technique using triple-channel heterodyning of triplet-signal". 2015 Second International Scientific-Practical Conference Problems of Infocommunications Science and Technology (PIC S&T). IEEE. 2015, 224-226. https://doi.org/10.1109/INFOCOMMST.2015.7357319

Abramova, V. V. et al. "Blind estimation of speckle variance in synthetic aperture radar images". 2015 International Conference on Antenna Theory and Techniques: Dedicated to 95 Year Jubilee of Prof. Yakov S. Shifrin, ICATT 2015 - Proceedings. The Institute of Electrical and Electronics Engineers, Inc. 2015. https://doi.org/10.1109/ICATT.2015.7136846

Mäkitalo, Jouni Boundary Integral Operators in Linear and Second-order Nonlinear Nano-optics Tampere University of Technology. Publication. Tampere University of Technology. 2015.

Toenger, S. et al. "Breathers Emergence in Spontaneous Modulation Instability". European Quantum Electronics Conference 2015. Optical Society of America (OSA). 2015.

Pakkanen, Jarkko Brownfield Process: A Method for the Rationalisation of Existing Product Variety towards a Modular Product Family Tampere University of Technology. Publication. Tampere University of Technology. 2015.

Sorri, Jaakko et al. "Building Codes and Demand Response of Energy Use". ja Nenonen, Suvi Junnonen, Juha-Matti (toimittaneet). Proceedings of the CIB World Building Congress 2016: Volume IV: Understanding Impacts and Functioning of Different Solutions. Tampere University of Technology. Department of Civil Engineering. 2016, 8-21.

Haverinen-Shaughnessy, Ulla et al. "Building energy retrofits, occupant health and wellbeing"., Prins, Matthijs , Wamelink, Hans Giddings, Bob Ku, Kihong Feenstra, Manon (toimittaneet). CIB World Building Congress 2016 Proceedings : Volume 2 Environmental Opportunities and challenges - Constructing commitment and acknowledging human experiences. Tampere University of Technology. Department of Civil Engineering. 2016, 679-687.

Spruijt-Metz, Donna et al. "Building new computational models to support health behavior change and maintenance: new opportunities in behavioral research". Translational Behavioral Medicine. 2015, 5(3). 335-346. https://doi.org/10.1007/s13142-015-0324-1

Myllärniemi, J. et al. "Business intelligence approach – a practical tool for competence based curriculum development". EDULEARN17 Proceedings. 9th International Conference on Education and New Learning Technologies: 3-5 July, 2017, Barcelona, Spain. IATED. 2017, 6387-6393. https://doi.org/10.21125/edulearn.2017.2451

Ranta, Valtteri, Leena Aarikka-Stenroos, ja Saku Mäkinen "Business models in the circular economy: a structured multiple-case analysis". Proceedings of ISPIM Innovation Summit, Kuala Lumpur, Malaysia. The International Society for Professional Innovation Management (ISPIM): 4-7 December 2016. 2016.

Kurvinen, Antti ja Jaakko Sorri "Bus Transportation Accessibility - Does It Impact Housing Values?". ja Nenonen, Suvi Junnonen, Juha-Matti (toimittaneet). Proceedings of the CIB World Building Congress 2016: Understanding impacts and functioning of different solutions. Tampere: Tampere University of Technology. Department of Civil Engineering. 2016, 321-331.

Annila, Petri et al. "By64 Tuulettuvat julkisivut 2016 -suunnittelu- ja toteusohjeen laadinta". ja Vinha, Juha Ruuska, Tiina (toimittaneet). Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015, 109-114.

Toivari, Eeva et al. "Calcium signaling in astrocytes: modeling Fura-2AM measurements". Frontiers in Neuroscience. 2010. https://doi.org/10.3389/conf.fnins.2010.13.00061

Nenonen, Suvi et al. "Campus retrofitting (CARE) methodology: a way to co-create future learning environments". Proceedings of the 20th CIB World Building Congress 2016: May 30-June 3, 2016, Tampere, Finland. 2016, 738-749.

Yli-Hietanen, Jari, Antti Ylipää, ja Olli Yli-Harja. "Cancer research in the era of next-generation sequencing and big data calls for intelligent modeling". Chinese Journal of Cancer. 2015. 34(10). https://doi.org/10.1186/s40880-015-0008-8

Machado, Marcelo A., Remy Magnier-Watanabe ja Tero Peltola "Capturing knowledge from research projects: From project reports to storytelling". 2016 Portland International Conference on Management of Engineering and Technology (PICMET). IEEE. 2016, 2048-2057. https://doi.org/10.1109/PICMET.2016.7806602

Huttunen, Heikki, Fatemeh Shokrollahi Yancheshmeh ja Ke Chen "Car Type Recognition with Deep Neural Networks". 2016 IEEE Intelligent Vehicles Symposium, IV 2016. IEEE. 2016, 1115-1120. https://doi.org/10.1109/IVS.2016.7535529

Sorsa, Aki et al. "Case depth prediction of nitrided components". 12th International Conference on Barkhausen Noise and Micromagnetic Testing. ICBM. 2017, 65-72.

Matikainen, Ville et al. "Cavitation erosion, slurry erosion and solid particle erosion performance of metal matrix composite (MMC) coatings sprayed with modern high velocity thermal spray processes". Materials Science and Technology Conference and Exhibition 2017, MS and T 2017: October 8-12, 2017, Pittsburgh, Pennsylvania USA. Association for Iron and Steel Technology, AISTECH. 2017, 1161-1163.

Kiilakoski, Jarkko et al. "Cavitation wear characteristics of Al2O3-ZrO2-ceramic coatings deposited by APS and HVOF -processes". Internationl Thermal Spray Conference ITSC 2017, Conference Proceedings: June 7-9, 2017, Düsseldorf, Germany.. DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V.. Düsseldorf: DVS Media GmbH. 2017, 928-933.

Saarinen, Esa "CBRN Defense Using THz Pulse Trains from Semiconductor Disk Lasers". NATO ARW on THz Diagnostics of CBRN effects and Detection of Explosives & CBRN: Proceedings of the NATO ARW on Detection of Explosives and CBRN. NATO Science for Peace and Security Series B: Physics and Biophysics. 2015.

Kähkönen, Kalle , Pekka Huovinen, ja Marko Keinänen, toim. CEO 2015: Proceedings of the 8th Nordic Conference on Construction Economics and Organization Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics. Report. Tampere University of Technology. Department of Civil Engineering. 2015.

Puolitaival, Taija, Perry Forsythe, ja Kalle Kähkönen "Challenges Facing BIM Education: Development of Appropriate Teaching and Learning Resources". RICS COBRA AUBEA 2015: The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors . London: Royal Institution of Chartered Surveyors. 2015.

Pöllänen, Markus, Roni Utriainen, ja Riku Viri "Challenges in the paradigm change from mobility as a self-service to mobility as a service". Conference Proceedings 1st International Conference of Mobility as a Service: ICoMaaS, Tampere 28.-29.11.2017. Tampere University of Technology. 2017, 246-265.

Martinsuo, Miia, Olli Ahvenniemi ja Eija Vaittinen "Changes in operations when introducing disruptive technologies". 22nd EurOMA Conference: Operations management for sustainable competitiveness. Switzerland: European Operations Management Association. 2015.

Pulkkinen, Antti et al. "Characterising the industrial context of engineering change management". Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. IFIP Advances in Information and Communication Technology. Springer New York LLC. 2016, 618-627. https://doi.org/10.1007/978-3-319-33111-9_56

Huova, Mikko et al. "Characteristics of Digital Hydraulics with Commercial Controllers". The Seventh Workshop on Digital Fluid Power . Linz Center of Mechatronics. 2015, 114-128.

Väätäjä, Heli "Characterizing the Context of Use in Mobile Work". Human Work Interaction Design. Work Analysis and Interaction Design Methods for Pervasive and Smart Workplaces: 4th IFIP 13.6 Working Conference, HWID 2015, London, UK, June 25-26, 2015, Revised Selected Papers. IFIP Advances in Information and Communication Technology. Springer Verlag. 2015, 97-113. https://doi.org/10.1007/978-3-319-27048-7_7

Tamminen, Pasi ja Toni Viheriäkoski "Charged cable-system ESD event". 2016 38th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD). IEEE. 2016. https://doi.org/10.1109/EOSESD.2016.7592559

Viheriäkoski, Toni et al. "Charge relaxation of slowly dissipative polymers". 2016 38th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD). IEEE. 2016, 1-9. https://doi.org/10.1109/EOSESD.2016.7592533

Rizwan, Muhammad, Yahya Rahmat-Samii, ja Leena Ukkonen "Circularly Polarized Textile Antenna For 2.45 GHz". Circularly Polarized Textile Antenna For 2.45 GHz. IEEE. 2015, 51-52. https://doi.org/10.1109/IMWS-BIO.2015.7303755

Ramis Ferrer, Borja "Classification of Knowledge Representation Implementations in the Manufacturing Systems Domain"., Strzelczak, S. ja Balda, Pavel Garetti, Marco Lobov, Andrei (toimittaneet). Open Knowledge-Driven Manufacturing & Logistics: The eScop Approach. Warsaw University of Technology Publishing House. 2015, 235-244.

Rinkinen, Jari ja Lauri Elo "Clean Components of Fluid Power System Reduce Maintenance Costs". Maintenance, Condition Monitoring and Diagnostics; Maintenance Performance Measurement and Management: MCMD 2015 and MPMM 2015. 2015.

Knyazev, S. et al. "Coarse-grained model of protein interaction for bio-inspired nano-communication". 2014 6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). 2015, 260-262. https://doi.org/10.1109/ICUMT.2014.7002112

Garifullin, M. et al. "Cold-formed RHS T joints with initial geometrical imperfections". Magazine of Civil Engineering. 2018, 80(4). 81-94. https://doi.org/10.18720/MCE.80.8

Teymouri, Shokoufeh et al. "Collagen-immobilized polyimide membranes for retinal pigment epithelial cell adherence and proliferation". Cogent Chemistry. 2017. 3(1). https://doi.org/10.1080/23312009.2017.1292593

Bautista, Godofredo et al. "Collective nonlinear optical effects in plasmonic nanohole ensembles of different rotational symmetries". CLEO: QELS_Fundamental Science 2018. The Optical Society; OSA. 2018. https://doi.org/10.1364/CLEO_QELS.2018.FW3G.3

Murayama, Mizuki et al. "Color-distribution similarity by information theoretic divergence for color images". 2016 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2016. IEEE. 2017. https://doi.org/10.1109/APSIPA.2016.7820681

Ritola, Tuomas ja Eric Coatanea "Combining Product Innovation With Service Innovation to Increase Value Created With a System". Proceedings of the ASME international mechanical engineering congress and exposition, 2013, vol 12. AMER SOC MECHANICAL ENGINEERS. 2014.

Koivisto, K. et al. "Commercialising reclaimed materials in earthworks – guidelines for productization and the process of appending these materials in the Finnish national code of practice". Proceedings of the 17th Nordic Geotechnical Meeting Reykjavik Iceland: Challenges in Nordic Geotechnic 25th - 28th of May. Reykjavik: Icelandic Geotechnical Society. 2016.

Solomitckii, D. et al. "Comparative evaluation of radio propagation properties at 15 GHz and 60 GHz frequencies". 2017 9th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). IEEE. 2017, 91-95. https://doi.org/10.1109/ICUMT.2017.8255207

Munir, M. W. et al. "Comparative investigation of remote tracking devices for aging care". INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY. 2017, 9(3). 261-266. https://doi.org/10.1007/s41870-017-0034-7

López Baeza, Jesús, Damiano Cerrone ja Kristjan Männigo "Comparing two methods for Urban Complexity calculation using Shannon-Wiener index". Comparing two methods for Urban Complexity calculation using Shannon-Wiener index. WIT Transactions on Ecology and The Environment. WIT Press. 2017, 369-378. https://doi.org/10.2495/SDP170321

Alexandru, Rusu-Casandra ja Elena-Simona Lohan. "Comparison of Detection Techniques for Multipath Propagation of Pseudolite Signals Used in Dense Industrial Environments". Procedia Engineering. 2015, 100(C). 1294-1300. https://doi.org/10.1016/j.proeng.2015.01.496

Kallonen, Antti et al. "Comparison of food frequency questionnaire data and shopping records for the assessment of food intake". Proceedings of Seventh International Conference on Well-Being in the Information Society: Fighting Inequalities (WIS 2018). TUCS Lecture Notes. 2018, 25-30.

Niittynen, Juha Comparison of Sintering Methods and Conductive Adhesives for Interconnections in Inkjet-Printed Flexible Electronics Tampere University of Technology. Publication. Tampere University of Technology. 2015.

Schnabel, Julius ja Seppo Valkealahti "Compensation of PV generator output power fluctuations with energy storage systems". 31st European Photovoltaic Solar Energy Conference and Exhibition (31st EU PVSEC), 14– 18 September, 2015, Hamburg, Germany. 2015, 2177-2181. https://doi.org/10.4229/EUPVSEC20152015-5BV.2.6

Salminen, Vesa, Jussi I. Kantola ja Hannu Vanharanta "Competence portfolio assessment of research and development center for regional development". 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015 . Procedia Manufacturing. Elsevier. 2015, 701-708. https://doi.org/10.1016/j.promfg.2015.07.310

Partanen, Jenni, toim. Complexity and Digitalisation of Cities - Challenges for Urban Planning and Design: Conference Proceedings of 13th AESOP Complexity and Planning Thematic Group Meeting 15th-16th January 2015, Tampere, Finland Tampere University of Technology. School of Architecture. 2015.

Pyrhönen, Veli-Pekka ja Hannu Koivisto "Composite Nonlinear Feedback Control of a Chemical Reactor". Proceedings of AutomaatioXXI, The Industrial Revolution of Internet – From Intelligent Devices to Networked Intelligence. SAS julkaisusarja. Helsinki, Finland: Suomen Automaatioseura ry. 2015.

Minaev, Georgy, Ari Visa, ja Robert Piche "Comprehensive survey of similarity measures for ranked based location fingerprinting algorithm". Indoor Positioning and Indoor Navigation (IPIN), 2017 International Conference on. IEEE. 2017. https://doi.org/10.1109/IPIN.2017.8115922

Holopainen, Sami et al. "Computational modelling of high-cycle fatigue using a continuum based model". Proceedings of the NSCM28: 28th Nordic Seminar on Computational Mechanics, October 22 – 23, 2015, Tallinn, Estonia. 2015, 71-74.

Katkovnik, Vladimir et al. "Computational wavelength resolution for in-line lensless holography: Phase-coded diffraction patterns and wavefront group-sparsity". Digital Optical Technologies 2017. Proceedings of SPIE. SPIE. 2017. https://doi.org/10.1117/12.2269327

Pyrhönen, Veli-Pekka, Jari Seppälä, ja Mikko Salmenperä "Computer-supported collaborative learning: Praxes in new cell-oriented configurable PC-classroom". SEFI conference 2016: Engineering Education on Top of the World: Industry University Cooperation. 2016.

Davidson, P. ja I. Merkulova "Computer vision aided navigation systems". 23rd Saint Petersburg International Conference on Integrated Navigation Systems, ICINS 2016 - Proceedings. State Research Center of the Russian Federation. 2016, 560-562.

Niemi, Jarkko V. et al. "Concentration and composition gradients of exhaust and non-exhaust particles near a major road". EAC 2015, European Aerosol Conference, 6-11 September, 2015, Milan, Italy. 2015.

Keinänen, Marko et al. "Consensus building in the pre-design phase of building projects"., Prins, Matthijs, Wamelink, Hans Giddings, Bob Ku, Kihong Feenstra, Manon (toimittaneet). WBC16 Proceedings of the CIB World Building Congress 2016 Volume II : Environmental Opportunties and challenges, Constructing commitment and acknowledging human experiences. Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics.. Tampere University of Technology. Department of Civil Engineering. 2016, 561-572.

Ortombina, L. et al. "Constrained Long-Horizon Direct Model Predictive Control for Synchronous Reluctance Motor Drives". 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018. IEEE. 2018. https://doi.org/10.1109/COMPEL.2018.8460173

Vaittinen, Eija ja Sanna Nenonen "Consumer acceptance in new service innovation: Enhancing consumer durables with new product-related services.". Proceedings of the 22nd Innovation Product Development Management Conference (IPDMC) . International Product Development Management Conference. 2015.

Saari, Ulla , Saku Mäkinen ja Petteri Alinikula "Consumers' Views on Eco-Friendliness as a Dimension of a High-Tech Brand". Going Green - CARE INNOVATION 2014 . SAT Austrian Society for Systems Engineering and Automation. 2014, 1-8.

Perttola, Henri, Hilkka Ronni ja Markku Heinisuo "Contact analysis included in a 3D FEA of tube splices". Eurosteel 2014 7th European conference on steel and composite structures. 2014.

Holopainen, Sami ja Reijo Kouhia Continuum approach for modeling fatigue in amorphous glassy polymers. Applications to the investigation of damage mechanisms in polycarbonate. 2016.

Rautiainen, Antti et al. "Control of Electric Vehicle Charging in Domestic Real Estates as Part of Demand Response Functionality". Cired Workshop 2016. 2016.

Cakir, Emre ja Tuomas Virtanen "Convolutional Recurrent Neural Networks for Rare Sound Event Detection". Proceedings of the Detection and Classification of Acoustic Scenes and Events 2017 Workshop (DCASE2017). Tampere University of Technology. Laboratory of Signal Processing. 2017, 27-31.

Helander, Nina , Jukka Vesalainen ja Puskala Juha "Coopetition and company performance". IMP 2015 Conference. 2015.

Keinänen, Marko ja Kalle Kähkönen. "Core Project Team As a Management Entity for Construction Projects". In_bo: Ricerche e progetti per il territorio, la citta e l'architettura. Construction Management. 2018, 9(13). 208-217.

Brechet, Nicolas et al. "Cost- and time-effective sewing patterns for embroidered passive UHF RFID tags". Proceedings of IEEE 2017 International Workshop on Antenna Technology. IEEE. 2017, 30-33. https://doi.org/10.1109/IWAT.2017.7915289

Martinsuo, Miia, Jesse Kivilä, ja Jussi Heikkilä "Creating sustainable value in manufacturing operations: the role of an external service provider". 22nd EurOMA Conference: Operations management for sustainable competitiveness. Switzerland: European Operations Management Association. 2015.

Vainio, Teija, Tanja Walsh, ja Jari Varsaluoma. "Cross-Cultural Design of Mobile Mathematics Learning Service for South African Schools". IADIS International Journal on WWW/Internet. 2015, 12(1). 81-93.

Niemi, Hannele, Jari Multisilta ja Erika Löfström Crossing Boundaries for Learning – through Technology and Human Efforts CICERO Learning Network, University of Helsinki. 2014.

Bernhardt, Julia et al. "Crowdsourcing in Business-to-Business Markets: A Value Creation and Business Model Perspective". Encyclopedia of E-Commerce Development, Implementation, and Management. United States: IGI Global. 2016, 933-943. https://doi.org/10.4018/978-1-4666-9787-4.ch066

Jarusriboonchai, Pradthana et al. "CueSense: a Wearable Proximity-Aware Display Enhancing Encounters". CHI EA '15 Proceedings of the 33rd Annual ACM Conference Extended Abstracts on Human Factors in Computing Systems . ACM. 2015. https://doi.org/10.1145/2702613.2732833

Jaakkola, Hannu ja Bernhard Thalheim "Culture-Aware Web Information System Development"., Welzer, Tatjana, Hölbl, Marko Kiyoki, Yasushi Thalheim, Bernhard Jaakkola, Hannu (toimittaneet). 25th International Conference on Information Modelling and Knowledge Bases EJC 2015 June 9-12, 2015, Maribor, Slovenia. Maribor: University of Maribor, Faculty of Electrical Engineering and Computer Science. 2015, 121-138.

Jaakkola, Hannu ja Bernhard Thalheim "Culture-Aware Web Information Systems in Dependence of Context"., Sornlertlamvanich, Virach , Chawakitchareon, Petchporn , Hansuebsai, Aran ja Koopipat, Chawan Kiyoki, Yasushi Jaakkola, Hannu Thalheim, Bernhard Yoshida, Naofum (toimittaneet). The Proceedings of the 27th International Conference on Information Modelling and Knowledge Bases. Sirindhorn International Institute of Technology, Thammasat University, Thailand. 2017, 309-331.

Stormi, Kati , Teemu Laine ja Petri Suomala "Customer lifetime value in manufacturing services". Proceedings of the Manufacturing Accounting Research Conference 2016: Lisbon, Portugal, June 15-17, 2016. Belgium: European Institute for Advanced Studies in Management EIASM. 2016.

Helander, Nina et al. "Customer Perceived Value - A Key in Marketing of Integrated Solutions"., Kavoura, A. Sakas, D. Tomaras, P. (toimittaneet). The 5th International Conference on Strategic Innovative Marketing., At Athens, Greece, Volume: 5: September 23-26, 2016. Springer Proceedings in Business and Economics. Springer. 2017, 37-42. https://doi.org/10.1007/978-3-319-56288-9_6

Vanharanta, Hannu, Jussi Kantola ja Sami Seikola "Customers’ conscious experience in a coffee shop". 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015 . Procedia Manufacturing. Elsevier. 2015, 618-625. https://doi.org/10.1016/j.promfg.2015.07.283

Ala-Maakala, Mariikka ja Heikki Liimatainen "Customer value management framework for supply chains". Pawar, Kulwant (toim.). The proceedings of 21st international symposium on logistics (ISL 2016): Sustainable transport and supply chain innovation, Kaohsiung, Taiwan 3-6 July 2016. 2016, 447-456.

Martinsuo, Miia ja Khadijeh Momeni "Customized service solutions for project business". 23rd Nordic Academy of Management Conference 2015. Nordic Academy of Management. 2015.

Devos, Mathieu et al. "D2D communications for mobile devices: Technology overview and prototype implementation". 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). IEEE. 2016, 124-129. https://doi.org/10.1109/ICUMT.2016.7765344

Väyrynen, Teemu et al. "Data-Driven Approach for Analysis of Performance Indices in Mobile Work Machines". ja Klemas, Thomas Chan, Steve (toimittaneet). DATA ANALYTICS 2015, The Fourth International Conference on Data Analytics. 2015, 81-86.

Róg, Tomasz et al. "Data including GROMACS input files for atomistic molecular dynamics simulations of mixed, asymmetric bilayers including molecular topologies, equilibrated structures, and force field for lipids compatible with OPLS-AA parameters". Data in Brief. 2016, 7. 1171-1174. https://doi.org/10.1016/j.dib.2016.03.067

Valenti, Michele et al. "DCASE 2016 Acoustic Scene Classification Using Convolutional Neural Networks". Proceedings of the Detection and Classification of Acoustic Scenes and Events 2016 Workshop (DCASE2016). Tampere University of Technology. Department of Signal Processing. 2016.

Martinsuo, Miia ja Ilkka Arvio "Decision making on sustainability in product development projects". 15th Annual Conference of EURAM European Academy of Management: EURAM 2015. Warsaw: European Academy of Management, EURAM. 2015.

Martinsuo, Miia, Ilmari Sukanen ja Jesse Kivilä "Defining product end-of-life strategies in new product development.". 23rd Nordic Academy of Management Conference NFF 2015- Business in society: NFF 2015. Nordic Academy of Management. 2015.

Huuhka, Satu "Demolished buildings: Empirical evidence on types, ages and construction materials"., Hajek, Petr ja Tywoniak, Jan Lupisek, Antonin Sojkova, Katerina (toimittaneet). CESB16 - Central Europe towards Sustainable Building 2016: Innovations for Sustainable Future, June 22-24, 2016, Prague. Prague: Czech Technical University in Prague. 2016, 1105-1112.

Huuhka, Satu "Demolition Rates of Buildings with Different Functions and Construction Materials"., Zelezna, Julie, Hajek, Petr Tywoniak, Jan Lupisek, Antonin Sojkova, Katerina (toimittaneet). YRSB16 - iiSBE Forum of Young Researchers in Sustainable Building 2016: Innovations for Sustainable Future June 21, 2016, Prague. Prague: Czech Technical University in Prague. 2016, 301-307.

Bernard, Alain et al. "Design: A Key Stage of Product Lifecycle". Procedia CIRP. 2014, 21. 3-9. https://doi.org/10.1016/j.procir.2014.06.146

Mäki, Antti-Juhana et al. "Design and simulation of a thermal flow sensor for gravity-driven microfluidic applications". IEEE 11th Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS). IEEE. 2016, 125-129. https://doi.org/10.1109/NEMS.2016.7758214

Järvinen, Samu T. et al. "Detailed analysis of laser-induced breakdown spectroscopy of single particles using electrodynamic balance trapping". The European Conference on Lasers and Electro-Optics 2015. Optical Society of America. 2015, CH_7_5.

Tenhunen, Mirja Detection and Assessment of Sleep-Disordered Breathing with Special Interest of Prolonged Partial Obstruction Tampere University of Technology. Publication. Tampere: Tampere University of Technology. 2015.

Höjbjerg Clarke, Ann, Majbritt Rostgaard Evald, ja Leena Aarikka-Stenroos "Developing commercialization plans through stakeholder interaction: Patterns identified from Public-Private Innovation Projects". ja Vagn Freytag, Per Höjbjerg Clarke, Ann (toimittaneet). The 31st Annual IMP Conference and Doctoral Colloquium 2015, Kolding, Denmark.. 2015.

Joutsenlahti, Jorma, Simo Ali-Löytty ja Seppo Pohjolainen "Developing Learning and Teaching in Engineering Mathematics with and without Technology". SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation. European Society for Engineering Education SEFI. 2016.

Sislian, Rodrigo et al. "Development of a Low-Cost Fuzzy Gain Schedule Neutralization Control System". WCECS 2015 - World Congress on Engineering and Computer Science 2015. Lecture Notes in Engineering and Computer Science. Newswood Limited. 2015, 575-578.

Sasaki, Yuichiro et al. "Development of chip-surface stimulus electrode array for fully-implantable subretinal prosthesis chip". Transactions of Japanese Society for Medical and Biological Engineering. 2014, 52. O-253-O-254. https://doi.org/10.11239/jsmbe.52.O-253

Fang, Cheng Yi et al. "Development of efficient electrically pumped nanolasers based on InAlGaAs tunnel junction". CLEO: Science and Innovations, CLEO_SI 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_SI.2018.SW4Q.4

Cardin, Julien et al. "Development of New Kinds of Plasmonics Materials Through Swift Heavy Ion Shaping Technique". 7th International Conference on Materials for Advanced Technologies (ICMAT 2013), Jun 2013, Suntec, Singapore. Singapore. 2013.

Tani, Takaharu et al. "Development of Si neural probe module with adjustable gain amplifier for neuronal signal recording". Transactions of Japanese Society for Medical and Biological Engineering. 2014, 52. O-377-O-378. https://doi.org/10.11239/jsmbe.52.O-377

Salmisto, Alpo, Marko Keinänen, ja Kalle Kähkönen "Development of students’ multidisciplinary collaboration skills by simulation of the design process". Proceedings of the CIB World Building Congress 2016: Volume I - Creating built environments of new opportunities.. 2016, 348-360.

Hokka, Mikko et al. "DIC measurements of the human heart during cardiopulmonary bypass surgery". Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC. 2016, 51-59. https://doi.org/10.1007/978-3-319-21455-9_6

Kuuluvainen, Heino et al. "Diesel engine exhaust particle measurements using a particle size magnifier (PSM)". EAC 2015, European Aerosol Conference, 6-11 September, 2015, Milan, Italy. 2015.

Uusitalo, Topi et al. "Difference frequency modulation of multi-section dual-mode lasers with nanoscale surface gratings". ja Belyanin, Alexey A. Smowton, Peter M. (toimittaneet). SPIE Proceedings: Novel In-Plane Semiconductor Lasers XV. Proceedings of SPIE. SPIE. 2016. https://doi.org/10.1117/12.2213888

Kärkkäinen, Hannu ja Anneli Silventoinen "Different approaches of the PLM maturity concept and their use domains –analysis of the state of the art". Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. IFIP Advances in Information and Communication Technology. Springer New York LLC. 2016, 89-102. https://doi.org/10.1007/978-3-319-33111-9_9

Kuuluvainen, Heino et al. "Different types of non-volatile nanoparticles in off-road diesel engine exhaust". EAC 2015, European Aerosol Conference, 6-11 September, 2015, Milan, Italy. 2015.

Pannian, Jisha C. et al. "Diffraction compensation of finite beams in hyperbolic metamaterials". Laser science 2016. Optical Society of America (OSA). 2016.

Ellman, Asko ja Tarja Tiainen. "Diffusion of innovation: Case of co-design of cabins in mobile work machine industry". Computers. 2019. 8(2). https://doi.org/10.3390/computers8020039

Fischer, Helmut et al. "Digital Hydraulics on Rails – Pilot Project of Improving Reliability on Railway Rolling Stock by Utilizing Digital Valve System". ja Laamanen, Arto Huhtala, Kalevi (toimittaneet). Proceedings of The Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. 2015, 644-654.

Soltani, Ayat et al. "Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery". Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Conference Proceedings of the Society for Experimental Mechanics. Springer New York LLC. 2018, 19-27. https://doi.org/10.1007/978-3-319-63552-1_4

Karimi, Nazanin, Puskal Kunwar, ja Juha Toivonen "Direct Laser Writing of Fluorescent Silver Nanoclusters in Polyvinyl Alcohol Films". Frontiers in Optics 2015: Proceedings. 2015. https://doi.org/10.1364/FIO.2015.FTu5E.4

Narhi, Mikko et al. "Direct Measurement of Temporal Rogue Waves Generated by Spontaneous Modulation Instability". Frontiers in Optics 2016. Optical Society of America. 2016.

Ritala, Paavo ja Leena Aarikka-Stenroos "Disruptive innovation in ecosystems: Path-creation and institutional barriers". XXVI ISPIM Conference: Porto, Portugal (2016) Blending Tomorrow’s Innovation Vintage.: The International Society for Professional Innovation Management, Jun. 2016. Manchester: International Society for Professional Innovation Management ISPIM. 2016, 1-16.

Kriesi, Carlo et al. "Distributed Experiments in Design Sciences, a Next Step in Design Observation Studies?"., Weber, C, Husung, S ja Cantamessa, M Cascini, G Marjanovic, D Venkataraman, S (toimittaneet). DS 80-2 Proceedings of the 20th International Conference on Engineering Design (ICED 15) Vol 2: Design Theory and Research Methodology Design Processes. International Conference on Engineering Design. DESIGN SOC. 2015.

Fei, Ze Song et al. "Distributed power allocation over indoor multi-pico stations". Journal of the Beijing Institute of Technology. 2015, 24(2). 227-232. https://doi.org/10.15918/j.jbit1004-0579.201524.0214

Aarikka-Stenroos, Leena ja Miika Talvitie "Distributors As Market Orientation Agents in Innovation Development and Commercialization.". The Proceedings of the XXVI ISPIM Conference 2015 Budapest, Hungary . Denmark: International Society for Professional Innovation Management ISPIM. 2015.

Jussila, Jari et al. "Does Strategic and Innovative Fit Indicate Smart Social Media use in a Company?". Proceedings of the 11th International Forum on Knowledge Asset Dynamics: Towards a New Architecture of Knowledge: Big Data, Culture and Creativity, Dresden -Germany 15-17 June 2016. Dresden. 2016, 1973-1983.

Isotalo, Tero J. ja Tapio Niemi "Dots-on-the-fly electron beam lithography". Bencher, Christopher (toim.). SPIE Proceedings: Alternative Lithographic Technologies VIII. Proceedings of SPIE. SPIE. 2016. https://doi.org/10.1117/12.2219136

Kahle, Hermann et al. "Double-side pumped membrane external-cavity surface-emitting laser (MECSEL) with increased efficiency emitting > 3 W in the 780 nm region". 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings. IEEE. 2019. https://doi.org/10.23919/CLEO.2019.8749958

Allahham, MHD Saria et al. "DroneRF dataset: A dataset of drones for RF-based detection, classification and identification". Data in Brief. 2019. 26. https://doi.org/10.1016/j.dib.2019.104313

Bolla, Padma ja Elena-Simona Lohan "Dual-frequency signal processing architecture for robust and precise positioning applications". 2018 IEEE/ION Position, Location and Navigation Symposium, PLANS 2018. IEEE. 2018, 72-80. https://doi.org/10.1109/PLANS.2018.8373367

Uusitalo, Topi et al. "Dual-Mode Behavior in Multi-Section DFB Semiconductor Lasers with Laterally-Coupled Ridge-Waveguide Surface Gratings". The European Conference on Lasers and Electro-Optics 2015. OSA - The Optical Society. 2015.

Paloniitty, Miika "Durability study on high speed water hydraulic miniature on/off-valve". DFP16, Proceedings of the eighth workshop on digital fluid power, May 24-25, 2016, Tampere, Finland. Tampere. 2016, 201-211.

Jokipii, Juha ja Teuvo Suntio "Dynamic characteristics of three-phase Z-source-based photovoltaic inverter with asymmetric impedance network". 9th International Confernce on Power Electronics ECCE Asia (ICPE-ECCE Asia). IEEE. 2015, 1976-1983. https://doi.org/10.1109/ICPE.2015.7168049

Stoykova, Elena et al. "Dynamic laser speckle metrology with binarization of speckle patterns". 19th International Conference and School on Quantum Electronics: Laser Physics and Applications. Proceedings of SPIE. SPIE. 2017. https://doi.org/10.1117/12.2262330

Toenger, S. et al. "Dynamics of rogue wave and soliton emergence in spontaneous modulation instability". CLEO: QELS - Fundamental Science, CLEO_QELS 2015. Optical Society of America (OSA). 2015. https://doi.org/10.1364/CLEO_QELS.2015.FW4D.2

Tiitola, Vesa et al. "Dynamics of value in technology inspired value co-creation: Case in homecare value network". 14th IFKAD 2019 Proceedings: 5-7 June 2019, Matera, Italy. PROCEEDINGS IFKAD. IKAM Centro Studi & Ricerche. 2019.

Mela, Kristo ja Markku Heinisuo "Economical utilization of high strength steel: Welded slim floor box beams". Eurosteel 2014 7th European conference on steel and composite structures. 2014.

Kähkönen, Kalle, Pekka Huovinen, ja Marko Keinänen. "Editorial". Procedia Economics and Finance. 2015, 21. 1-5.

Christiansen, John et al. "Editorial: Experiments in an Organisational Context". CERN IdeaSquare Journal of Experimental Innovation. 2017. 1(2). https://doi.org/10.23726/cij.2017.684

Juuti, Petri S. "Editorial: Information to support decision-making". Ympäristöhistoria: Finnish Journal of Environmental History. 2017, 2017(1). 5-6.

Partanen, Tiina et al. "Educating Computer Science Educators Online - A Racket MOOC for Elementary Math Teachers of Finland". Proceedings of the 9th International Conference on Computer Supported Education. SCITEPRESS - Science and Technology Publications. 2017, 47-58. https://doi.org/10.5220/0006257800470058

Niemelä, Pia et al. "Educating future coders with a holistic ICT curriculum and new learning solutions". 7th International Multi-Conference on Complexity, Informatics and Cybernetics, IMCIC 2016 and 7th International Conference on Society and Information Technologies, ICSIT 2016. IIIS. 2016, 132-136.

Peura, Pasi, Petri Vuoristo, ja Jorma Vihinen. "Education and Materials Joining Research methods at Tampere University of Technology". Hitsaustekniikka. 2015, 65(2-3/2015). 73-76.

Kuula, Pirjo et al. "Education on the utilization of secondary materials in earthworks". ja Lahtinen, Pentti Raasakka, Ville (toimittaneet). Proceedings of the 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials: No Gradle no Grave Circular Economy into practice. RIL - Finnish Association of Civil Engineers. 2018, 177-187.

Aapro, Aapo, Tuomas Messo, ja Teuvo Suntio "Effect of active damping on the output impedance of PV inverter". IEEE 16th Workshop on Control and Modeling for Power Electronics (COMPEL). 2015. https://doi.org/10.1109/COMPEL.2015.7236463

Suokas, Esa "Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating". 16th TAPPI European PLACE Conference 2017. TAPPI Press. 2017, 529-544.

Tan, Lea Chua et al. "Effect of elevated nitrate and sulfate concentrations on selenate removal by mesophilic anaerobic granular sludge bed reactors". Environmental Science: Water Research & Technology. 2018, 4(2). 303-314 . https://doi.org/10.1039/C7EW00307B

Viinamäki, Jukka, Juha Jokipii, ja Teuvo Suntio "Effect of Inductor Saturation on the Harmonic Currents of Grid-Connected Three-Phase VSI in PV Application". 2015 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), 1-5 June 2015, Seoul. IEEE. 2015, 1209-1216. https://doi.org/10.1109/ICPE.2015.7167934

Singh, A. et al. "Effect of Laser Power on Yield of TiO2 Nanoparticles Synthesized by Pulsed Laser Ablation in Water". Journal of Ceramic Science and Technology. 2017, 8(1). 39-43. https://doi.org/10.4416/JCST2016-00071

Baczkiewicz, Jolanta, Sami Pajunen ja Markku Heinisuo. "Effect of radiation inside square hollow section under moderate non-symmetric fire". Fire Research. 2018, 2(1). 25-30. https://doi.org/10.4081/fire.2018.42

Vazquez Fernandez, N. et al. "Effects of adiabatic heating estimated from tensile tests with continuous heating". Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Conference Proceedings of the Society for Experimental Mechanics. Springer New York LLC. 2018, 1-7. https://doi.org/10.1007/978-3-319-62956-8_1

Munnukka, Juha et al. "Effects of Social Media on Consumers' Sports Brand Experiences and Loyalty". Stieler, Maximilian (toim.). Creating Marketing Magic and Innovative Future Marketing Trends: Proceedings of the 2016 Academy of Marketing Science (AMS) Annual Conference. Developments in Marketing Science: Proceedings of the Academy of Marketing Science. Springer International Publishing. 2017, 1051-1064. https://doi.org/10.1007/978-3-319-45596-9_194

Stupnikov, Alexey, Galina V. Glazko, ja Frank Emmert-Streib. "Effects of subsampling on characteristics of RNA‑seq data from triple‑negative breast cancer patients". Chinese Journal of Cancer. 2015. 34(10). https://doi.org/10.1186/s40880-015-0040-8

Mardoukhi, Ahmad, Mikko Hokka, ja Veli-Tapani Kuokkala "Effects of surface cracks and strain rate on the tensile behavior of Balmoral Red granite". 11th International Conference on the Mechanical and Physical Behaviour of Materials Under Dynamic Loading. EDP Sciences. 2015.

Koskinen, Jukka Antero "E-learning of ethics, awareness, hacking and research by information security majors". Proceedings of SEFI Annual Conferences. European Society for Engineering Education SEFI. 2015.

Lummi, Kimmo et al. "Electricity Distribution Network Tariffs - Present Practices, Future Challenges and Development Possibilities". CIRED Workshop 2016. 2016.

Laine, Katja et al. "Electronic Exam in Electronics Studies". SEFI Annual Conference 2016: Engineering Education on Top of the Wolrd: Industry University Cooperation. 2016.

Assanto, Gaetano et al. "Electro-optic steering of random laser emission in liquid crystals". Photonics Letters of Poland. 2018, 10(4). 103-105. https://doi.org/10.4302/plp.v10i4.852

Viheriäkoski, Toni et al. "Electrostatic discharge characteristics of conductive polymers". Electrical Overstress/Electrostatic Discharge Symposium Proceedings 2017, EOS/ESD 2017. ESD Association. 2017.

Viheriäkoski, Toni et al. "Electrostatic Threats in Hospital Environment". 2014 36TH Electrical overstress/electrostatic discharge symposium (EOS/ESD). Electrical Overstress Electrostatic Discharge Symposium. IEEE COMPUTER SOC. 2014.

Niemelä, Pia ja Antti Valmari "Elementary math to close the digital skills gap". CSEDU 2018 - Proceedings of the 10th International Conference on Computer Supported Education. SCITEPRESS. 2018, 154-165. https://doi.org/10.5220/0006800201540165

Virkki, Johanna et al. "Embroidered antennas and antenna-electronics interfaces for wearable RFID tags". IMWS-AMP 2017 International Microwave Workshop Series on Advanced Materials and Processes. IEEE. 2017. https://doi.org/10.1109/IMWS-AMP.2017.8247437

Sand, Johan et al. "EMCCD imaging of strongly ionizing radioactive materials for safety and security". 2013 Conference on Lasers and Electro-Optics - International Quantum Electronics Conference. Optical Society of America. 2013, JSII_P_1.

Sariola, Rami "Emergence of relationship triads in construction project networks". 23rd Nordic Academy of Management conference, NFF, 12-14 August 2015, Copenhagen, Denmark. Nordic Academy of Management Conference. Copenhagen, Denmark: Nordic Academy of Management. 2015, 1-13.

Drossos, Konstantinos et al. "Emergency Voice/Stress - level Combined Recognition for Intelligent House Applications". Audio Engineering Society Convention 132. AES Audio Engineering Society. 2012.

Andersson, Tuula , Mika Boedeker, ja Vilma Vuori "Emotion-Gauge: Analyzing affective experiences in B2B customer journeys"., Kavoura, Androniki Sakas, Damianos Tomaras, Petros (toimittaneet). Strategic Innovative Marketing : 5th IC-SIM, Athens, Greece, September 23-26, 2016. Springer Proceedings in Business and Economics. Springer. 2017, 31-36.

Vuolle, Maiju et al. "Emotion measurement services for knowledge workers". RESER2015: 25th Annual RESER Conference, September 10-12, 2015 Copenhagen, Denmark. Copenhagen: RESER European Association for Research on Services. 2015.

Juuti, Tero, Jarkko Pakkanen, ja Timo Lehtonen "Empirical study of good, bad and ugly modular engineering solutions in machinery manufacturing industry". Proceedings of the Design Society: International Conference on Engineering Design: The 22nd International Conference on Engineering Design, ICED19, Delft, The Netherlands, 5-8 August 2019. Proceedings of the Design Society: International Conference on Engineering Design . Cambridge University Press. 2019, 2981-2990. https://doi.org/10.1017/dsi.2019.305

Viita, Jussi ja Juha-Matti Junnonen "Empowerment in construction: a qualitative analysis of subcontractors' quality assurance". Proceedings of the CIB World Building Congress 2016: Volume II - Environmental Opportunies and Challenges. Constructing Commitment and Acknowledging Human Experiences. Tampere University of Technology. Department of Civil Engineering. 2016, 436-448.

Suominen, Anu "Enablers and barriers of inter-organizational network’s formation for new market entry: case Finnish maritime industry". 31st EGOS Colloquium, General Theme, Organizations and the Examined Life: Reason, Reflexivity and Responsibility, July 2–4, 2015 Athens, Greece. Organization Studies. SAGE Publications. 2015.

Helander, Nina et al. "Enablers and Restraints of Knowledge Work – Does profession make a difference?". Towards a new architecture of knowledge : Big Data, culture and creativity: IFKAD 2016-11th International Forum on Knowledge Asset Dynamics, Dresden 15-17.6.2016, Germany. 2016, 40-52.

Sorri, Jaakko et al. "Energiatehokkuusinformaatio palvelurakennuksissa". Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut : 24.-26.10.2017, Tampere. Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017, 325-330.

Heljo, Juhani, Jaakko Sorri ja Pirkko Harsia "Energiatehokkuus on entistä enemmän sähkötehon hallintaa". ja Vinha, Juha Kivioja, Henna (toimittaneet). Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.. Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017, 281-286.

Teriö, Olli ja Jaakko Sorri "Energiatehokkuus rakennusalan ammattityövoiman täydennyskoulutuksessa". ja Vinha, Juha Ruuska, Tiina (toimittaneet). Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015, 97-102.

Ikkala, Kimmo et al. "Energy efficiency evaluation method for machine tools". Flexible Automation and Intelligent Manufacturing 2015. The Choir Press. 2015, 58-65.

Du, Liuliu et al. "Energy Retrofits in Multi-family Buildings in North-east Europe: The Impacts on Thermal Conditions". Energy Procedia. 2015, 78. 860-864. https://doi.org/10.1016/j.egypro.2015.11.008

Laine, Teemu, Petri Suomala, ja Natalia Saukkonen "Engaging facts and feelings in management accounting practices". IFKAD 2015 : 10th International Forum on Knowledge Asset Dynamics, Bari, Italy, June 10th-12th. International forum on knowledge asset dynamics. Italy: Institute of Knowledge Asset Management & Arts for Business Institute. 2015.

Kylliäinen, Mikko et al. "Engelin teatterin huoneakustiikan mallintaminen". Akustiikkapäivät 2015. Akustiikkapäivät. Akustinen seura. 2015, 145-150.

Sheikh, Muhammad Usman, Kimmo Hiltunen, ja Jukka Lempiainen. "Enhanced outdoor to indoor propagation models and impact of different ray tracing approaches at higher frequencies". Advances in Science, Technology and Engineering Systems. 2018, 3(2). 58-68. https://doi.org/10.25046/aj030207

Kauranen, Martti et al. "Enhancement mechanisms for second-harmonic generation from metal nanostructures". PROCEEDINGS OF SPIE: Ultrafast Phenomena and Nanophotonics XX. 2015.

Pyrhönen, Veli-Pekka "Enhancing old laboratory experiment using flipped learning: Towards self-regulating collaborative groups in blended learning environment". SEFI conference 2016: Engineering Education on Top of the World: Industry University Cooperation. 2016.

Vaittinen, Eija , Miia Martinsuo, ja Sanna Nenonen "Enhancing the acceptance of advanced services among users of complex systems"., Baines, Tim Harrison, Dave Zolkiewski, Judy (toimittaneet). Servitization: Shift, Transform, Grow: Proceedings of the Spring Servitization Conference, 16-17 May 2016 (SSC2016). 2016, 162-170.

Sariola, Rami ja Miia Martinsuo "Enhancing the supplier’s third-party relationships in construction projects". The Bartlett IRNOP 2015: International Research Network on Organizing by Projects Conference . IRNOP. 2015.

Dang, Duong ja Samuli Pekkola "Enterprise architecture and organizational reform: a project debrief". Proceedings the 21st Pacific Asian Conference on Information Systems 2017 (PACIS’2017): Langkawi, Malay, 16-20 July, 2017. Association for Information Systems AIS. 2017.

Pekkola, Samuli "Enterprise architecture as strategy, practice, or approach". 4th Innovation in Information Infrastructures (III) Workshop. Warwick, UK: University of Warwick. 2015.

Chen, Zengqiang et al. "Entropy of weighted graphs with Randić weights". Entropy. 2015, 17(6). 3710-3723. https://doi.org/10.3390/e17063710

Halinoja, Markku Environment Interpretation for Business Continuity in a Project Supplier’s Networks – Critical Factors in International Industrial Upgrades Tampere University of Technology. Publication. Tampere: Tampere University of Technology. 2015.

Siljander, Sanna et al. "Erosion testing of filled and/or reinforced vinyl ester composites in water medium at elevated temperature". Proceedings of the 20th International Conference on Composite Materials. 2015.

Tamminen, Pasi et al. "ESD and Disturbance Cases in Electrostatic Protected Areas". Electrical Overstress / Electrostatic Discharge Symposium Proceedings 2015. USA: IEEE COMPUTER SOC. 2015. https://doi.org/10.1109/EOSESD.2015.7314792

Tamminen, Pasi, Lauri Sydänheimo, ja Leena Ukkonen "ESD Sensitivity of 01005 Chip Resistors and Capacitors". 2014 36TH Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD). Electrical Overstress Electrostatic Discharge Symposium. IEEE COMPUTER SOC. 2014.

Einolander, Jarno "Evaluating organizational commitment in support of organizational leadership". 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015. Procedia Manufacturing. Elsevier. 2015, 668–673. https://doi.org/10.1016/j.promfg.2015.07.300

Raunio, Jukka-Pekka et al. "Evaluating the contrast of planar periodic patterns on paper". Paper Conference and Trade Show, PaperCon 2018. TAPPI Press. 2018, 294-302.

Mendes, Miguel Rodrigues, Narayan Puthanmadam Subramaniyam ja Katrina Wendel-Mitoraj "Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes". International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS. 2015, 1092-1095. https://doi.org/10.1109/NER.2015.7146818

Us, Defne et al. "Evaluation of Median Root Prior for Robust In-Beam PET Reconstruction". IEEE Transactions on Radiation and Plasma Medical Sciences. 2018, 2(5). 490-498. https://doi.org/10.1109/TRPMS.2018.2854231

Kart, Ugur et al. "Evaluation of visual object trackers on equirectangular panorama". VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications . SCITEPRESS. 2018, 25-32. https://doi.org/10.5220/0006526200250032

Li, Lin et al. "Evolutionary multiobjective optimization for adaptive dataflow-based digital predistortion architectures". EAI Endorsed Transactions on Cognitive Communications. 2017. 17(10). https://doi.org/10.4108/eai.23-2-2017.152187

Holopainen, Sami "Evolution equations based approach for modeling of fatigue in amorphous glassy polymers. On the investigation of fatigue damage development in polycarbonate"., Papadrakakis, M. ja Papadopoulos, V. Stefanou, G. Plevris , V. (toimittaneet). Proc. of VII European Congress on Computational Methods in Applied Sciences and Engineering , ECCOMAS Congress 2016. : M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) . Crete Island, Greece, 5 – 10 June 2016. 2016, 6675-6687. https://doi.org/10.7712/100016.2289.11047

Mäkitalo-Keinonen, Tiina ja Leena Aarikka-Stenroos "Examining Innovation Barriers along Innovation Process in Multi-Industry Hygiene-Technology Network.". The Proceedings of the XXVI ISPIM Conference 2015 Budapest, Hungary . Denmark: International Society for Professional Innovation Management ISPIM. 2015.

Saari, Sampo et al. "Exhaust Particles and NOx Emission Factors of a Modern Heavy Duty Truck equipped with the SCR in Real-world Driving Conditions". EAC 2015, European Aerosol Conference, 6-11 September, 2015, Milan, Italy. 2015.

Kelo, Tomi ja Juhani Eronen "Experiences from development of security audit criteria". Proceedings of the 16th European Conference on Cyber Warfare and Security, ECCWS 2017. TAPPI Press; Curran Associates, Inc. 2017, 208-215.

Ryczkowski, Piotr et al. "Experimental demonstration of temporal ghost imaging". 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference. OSA. 2015.

Garifullin, Marsel. "Experimental moment resistance of rectangular hollow section T joints". MATEC Web of Conferences. 2018. 245. https://doi.org/10.1051/matecconf/201824508003

Naumenko, V. V. et al. "Experimental study of bispectrum-based encoding in radio communication system". 2015 International Conference on Antenna Theory and Techniques: Dedicated to 95 Year Jubilee of Prof. Yakov S. Shifrin, ICATT 2015 - Proceedings. The Institute of Electrical and Electronics Engineers, Inc. 2015. https://doi.org/10.1109/ICATT.2015.7136853

Tosi, Davide et al. "Experimenting traditional and modern reliability models in a 3-years european software project". Proceedings of the 11th European Conference on Information Systems Management, ECISM 2017. Academic Conferences and Publishing International Limited. 2017, 304-314.

Abe, Shinya et al. "Exploration of different boundary conditions in the sideways falling situation in hip fracture finite element modelling". Proceeding of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry. 2015, 130-135.

Chaudhary, Sunil et al. "Exploring Attitudes, Knowledge and Competencies for Security Technology: A Cross-Cultural Survey in Higher Education". 8th International Conference on ICT, Society and Human Beings 2015. 2015, 11-18.

Mäkinen, S.J., O. Dedehayir ja R. Ortt "Exploring effects of ecosystem clockspeed on product performance". IEEE International Conference on Industrial Engineering and Engineering Management. IEEE COMPUTER SOCIETY PRESS. 2015, 1457-1461. https://doi.org/10.1109/IEEM.2014.7058880

Saari, Ulla A. ja Saku J. Mäkinen "Exploring how brand experience measurement could be used for integrating marketing and R&D". XXVII ISPIM Innovation Conference 2016: Porto, 19-22 June, 2016. 2016.

Hynynen, Ari "Extending Professional Fields. Architectural Research and Regional Development". ja Kähkönen, Kalle Keinänen, Marko (toimittaneet). Proceedings of the CIB World Building Congress 2016.: Volume I - Creating built environments of new opportunities. Tampere University of Technology. Department of Civil Engineering. 2016, 372-383.

Närhi, Mikko et al. "Extreme Nonlinear Signal Amplification". 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference. OSA. 2015.

Niu, Longchuan et al. "Eye-in-Hand Manipulation for Remote Handling: Experimental Setup". International Conference on Robotics and Mechantronics : (ICRoM 2017). IOP conference series : materials science and engineering. IOP Publishing Ltd. 2018. https://doi.org/10.1088/1757-899X/320/1/012007

Perttula, Arttu "Eye tracking studies focusing on mathematics: a literature review". INTED2017. The 11th annual International Technology, Education and Development Conference: Valencia, 6th - 8th of March, 2017.. IATED Academy. 2017. https://doi.org/10.21125/inted.2017.0639

Zia, Nouman et al. "Fabrication and characterization of broadband superluminescent diodes for 2 μm wavelength". Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XX. Proceedings of SPIE. SPIE. 2016. https://doi.org/10.1117/12.2209720

Chen, X. et al. "Fabrication and Practical Evaluation of Glove-integrated Passive UHF RFID Tags". 2018 IEEE International Conference on RFID Technology Application (RFID-TA). IEEE. 2018. https://doi.org/10.1109/RFID-TA.2018.8552814

Chen, X. et al. "Fabrication and reliability evaluation of passive UHF RFID T-shirts". 2018 IEEE International Workshop on Antenna Technology, iWAT2018 - Proceedings. IEEE. 2018, 1-4. https://doi.org/10.1109/IWAT.2018.8379146

Kunwar, Puskal et al. "Fabrication of Fluorescent Silver Nanoclusters-based Micro-Label in Polymers". The European Conference on Lasers and Electro-Optics 2015. European Conference on Lasers and Electro-Optics Europe and International Quantum Electronics Conference. OSA. 2015.

Siivonen, Lauri et al. "Fault Tolerance of Digital Hydraulics in High Dynamic Hydraulic System". The Fourteenth Scandinavian International Conference on Fluid Power. 1 udg., Tampere, Finland. 2015.

Ometov, Aleksandr et al. "Feasibility characterization of cryptographic primitives for constrained (wearable) IoT devices". 2016 IEEE International Conference on Pervasive Computing and Communication Workshops, PerCom Workshops 2016. IEEE. 2016. https://doi.org/10.1109/PERCOMW.2016.7457161

Vilppo, Olli ja Joni Markkula "Feasibility of electric buses in public transport". EVS28 28th International Electric Vehicle Symposium and Exhibition. 2015.

Petrov, Vitaly "Feasibility study of the THz band for communications between wearable electronics". 2015 17th Conference of Open Innovations Association (FRUCT), 20-24 April 2015, Yaroslavl. . Conference of Open Innovations Association (FRUCT). IEEE. 2015, 157-162. https://doi.org/10.1109/FRUCT.2015.7117987

Tamminen, Pasi et al. "Field Collapse Event ESD Test Method". 2014 36TH Electrical overstress/electrostatic discharge symposium (EOS/ESD). Electrical Overstress Electrostatic Discharge Symposium. IEEE COMPUTER SOC. 2014.

Tiihonen, Juha et al. Finite temperature path-integral modeling of quantum dot cellular automata. 2016.

Takala, Annina ja Kati Korhonen-Yrjänheikki "Finnish Engineering Education for Sustainable Development in 2016 - Call for collaborative learning". SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation. European Society for Engineering Education SEFI. 2016.

Lietzen, Jesse ja Mikko Kylliäinen "Finnish Round Robin Test on Airborne Sound Insulation". Proceedings of the 11th European Congress and Exposition on Noise Control Engineering, Euronoise 2018, May 27-31 2018, Hersonissos, Crete, Greece: Reduce Noise to Improve Life. European Congress and Exposition on Noise Control Engineering. Hersonissos, Crete, Greece: European Acoustic Association EAA. 2018, 1677-1682.

Ropo, Matti et al. "First-principles data set of 45,892 isolated and cation-coordinated conformers of 20 proteinogenic amino acids". Scientific Data. 2016. 3. https://doi.org/10.1038/sdata.2016.9

Dongho-Nguimdo, G. M. et al. "First principles prediction of the solar cell efficiency of chalcopyrite materials  AgMX2(M=In, Al; X=S, Se, Te)". Computational Condensed Matter. 2019. 21. https://doi.org/10.1016/j.cocom.2019.e00391

Kaarakka, Terhi Fractional Ornstein-Uhlenbeck Processes Tampere University of Technology. Publication. Tampere University of Technology. 2015.

Suominen, Olli et al. "Framework for optimization and scheduling of a copper production plant". 26th European Symposium on Computer Aided Process Engineering, 2016. Computer Aided Chemical Engineering. Elsevier Science B.V. 2016, 1243-1248. https://doi.org/10.1016/B978-0-444-63428-3.50212-5

Abdallah, Zeina et al. "Frequency Comb Generation in a Continuous-Wave Pumped Second-Order Nonlinear Waveguide Resonator". 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings. IEEE. 2019. https://doi.org/10.23919/CLEO.2019.8750403

Kantola, Emmi et al. "Frequency-doubled VECSEL employing a Volume Bragg Grating for linewidth narrowing". CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.17

Kantola, Emmi et al. "Frequency-doubled wafer-fused 638 nm VECSEL with an output power of 5.6 W". CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.10

Taibi, Davide ja Kari Systä "From monolithic systems to microservices: A decomposition framework based on process mining"., Ferguson, Donald ja Munoz, Victor Mendez Helfert, Markus Pahl, Claus (toimittaneet). CLOSER 2019 - Proceedings of the 9th International Conference on Cloud Computing and Services Science. SCITEPRESS. 2019, 153-164. https://doi.org/10.5220/0007755901530164

Kiili, Kristian "From theories to game mechanics: Developing a game for training rational numbers". Proceedings of the 11th European Conference on Games Based Learning, ECGBL 2017. Academic Conferences and Publishing International Limited. 2017, 328-334.

Smith, Jarrod et al. "Full-Field Temperature and Strain Measurement in Dynamic Tension Tests on SS 304". Dynamic Behavior of Materials, Volume 1: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Conference proceedings of the Society for Experimental Mechanics. Springer International Publishing. 2016, 37-44. https://doi.org/10.1007/978-3-319-41132-3_6

Vilmi, Pauliina et al. "Fully printed memristors for a self-sustainable recorder of mechanical energy". Flexible and Printed Electronics. 2016. 1(2). https://doi.org/10.1088/2058-8585/1/2/025002

Pluduma, Liene et al. "Functionalizing Surface Electrical Potential of Hydroxyapatite Coatings". 11th International Conference Medical Applications of Novel Biomaterials and Nanotechnology. Advances in Science and Technology. 2016, 12-17.

Porkka, Pasi L. "Functional model for organisational and safety culture". Chemical Engineering Transactions. Chemical Engineering Transactions. Italian Association of Chemical Engineering AIDIC. 2016, 907-912. https://doi.org/10.3303/CET1648152

Hynynen, Ari . "Future in wood? Timber construction in boosting local development.". European Spatial Research and Policy. 2016, 23(1). 127-139. https://doi.org/10.1515/esrp-2016-0007

Backas, Joni, Reza Ghabcheloo, ja Kalevi Huhtala "Gain Scheduling Full State Feedback with D-Implementation for Velocity Tracking of Hydrostatic Drive Transmission". Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation. 2015, 64-75.

Perttula, Arttu ja Pauliina Tuomi "Gamification at School". EDULEARN17: The 9th International Conference on Education and New Learning Technologies. 2017, 9334-9340. https://doi.org/10.21125/edulearn.2017.0756

Psichoudaki, Magda et al. "Gas and particle composition and properties of photochemically aged ship plumes using chemical ionization and aerosol mass spectrometry". EAC 2015, European Aerosol Conference, 6-11 September, 2015, Milan, Italy. 2015.

Eriksson, Sirkka-Liisa, Heikki Orelma ja Vesa Vuojamo "Generalized hyperbolic harmonic functions in the plane". Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2014 (ICNAAM-2014). American Institute of Physics Inc. 2015. https://doi.org/10.1063/1.4912658

Messo, Tuomas, Aapo Aapro, ja Teuvo Suntio "Generalized multivariable small-signal model of three-phase grid-connected inverter in DQ-domain". IEEE 16th Workshop on Control and Modeling for Power Electronics (COMPEL). IEEE. 2015. https://doi.org/10.1109/COMPEL.2015.7236460

Saari, Sampo et al. "Generation of characteristic traffic emission aerosol in particulate filter collection efficiency tests". The 11th International Conference on Industrial Ventilation, Shanghai, China. 2015.

Saari, Sampo et al. "Generation of Characteristic Traffic Emission Aerosol in Particulate Filter Collection Efficiency Tests". EAC 2015, European Aerosol Conference, 6-11 September, 2015, Milan, Italy. 2015.

Stankovic, Radomir S., Jaakko Astola ja Claudio Moraga "Gibbs Dyadic Differentiation on Groups - Evolution of the Concept". Computer Aided Systems Theory – EUROCAST 2017 - 16th International Conference, Revised Selected Papers. Lecture Notes in Computer Science. Springer Verlag. 2018, 229-237. https://doi.org/10.1007/978-3-319-74727-9_27

Nommeots-Nomm, Amy ja Jonathan Massera "Glass and Glass-Ceramic Scaffolds: Manufacturing Methods and the Impact of Crystallization on In-Vitro Dissolution". Scaffolds in Tissue Engineering - Materials, Technologies and Clinical Applications. InTech Open Access Publisher. 2017. https://doi.org/10.5772/intechopen.70242

Ahmed, Shahbaz et al. "Glove-integrated slotted patch antenna for wearable UHF RFID reader". 2018 IEEE International Conference on RFID Technology & Application (RFID-TA). IEEE. 2018. https://doi.org/10.1109/RFID-TA.2018.8552817

Christophe, Francois et al. "Grammatical and Semantic Disambiguation of Requirements at Elicitation and Representation Stages". Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering, 2011, vol 9. AMER SOC MECHANICAL ENGINEERS. 2012, 17-31.

Ledentsov, N. N. et al. "Green (In,Ga,Al)P-GaP light-emitting diodes grown on high-index GaAs surfaces". Proceedings of SPIE: Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XIX. SPIE. 2015. https://doi.org/10.1117/12.2083953

Amr, Alia'a ja Magdy Saad. "Growth of Urban Peripheries with Reference to Inconsistent Spatial Planning Policies: South-east Amman as case study". European International Journal of Science and Technology. 2015, 4(3). 54-68.

Leinonen, Tomi et al. ">8W GaInNAs VECSEL emitting at 615 nm". Proceedings of SPIE: Vertical External Cavity Surface Emitting Lasers (VECSELs) V. SPIE. 2015. https://doi.org/10.1117/12.2079162

Järvenpää, Eeva ja Minna Lanz "Guidelines for Designing Human-friendly User Interfaces for Factory Floor Manufacturing Operators". Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015, Proceedings, Part II. IFIP Advances in Information and Communication Technology. Springer International Publishing. 2015, 531-538. https://doi.org/10.1007/978-3-319-22759-7_61

Komar, Maria, Sviatoslav Edelev, ja Yevgeni Koucheryavy "Handheld wireless authentication key and secure documents storage for the Internet of Everything". Proceedings of the 18th Conference of Open Innovations Association FRUCT and Seminar on Information Security and Protection of Information Technolog, FRUCT-ISPIT 2016. IEEE COMPUTER SOCIETY PRESS. 2016, 120-130. https://doi.org/10.1109/FRUCT-ISPIT.2016.7561517

Kulmala, Anna ja Sami Repo "Handling exceptional situations in a distribution network congestion management algorithm". CIRED Workshop 2016. Helsinki, Finland. 2016. https://doi.org/10.1049/cp.2016.0663

Valtonen, Kati ja Tuomo Tiainen. "Hard Rock (- ei Hallelujah, vaan) Tribology: Pohjoismainen kaivosteollisuuden kulumisongelmiin keskittyvä kurssi ja seminaari Tampereella". Materia. 2015, 2015(1). 30-33.

Roncero-Sanchez, Pedro ja Enrique Acha "Harmonic and Imbalance Voltage Mitigation in Smart Grids: A DSTATCOM Based Solution". IEEE EUROCON 2015. 2015. https://doi.org/10.1109/EUROCON.2015.7313751

Vihola, Jaakko et al. "Heat Loss Rate of the Finnish Building Stock". Procedia Economics and Finance. 2015, 21. 601-608. https://doi.org/10.1016/S2212-5671(15)00218-X

Zare, Alireza et al. "HEVC-compliant viewport-adaptive streaming of stereoscopic panoramic video". 2016 Picture Coding Symposium, PCS 2016. IEEE. 2017. https://doi.org/10.1109/PCS.2016.7906401

Jäniskangas, Tapani Hiekkatekonurmipintaisten pesäpallokenttien ominaisuuksien muuttuminen ja elinkaari Tampereen teknillinen yliopisto. Rakennustekniikan laitos. Maa- ja pohjarakenteet. Tutkimusraportti. Tampereen teknillinen yliopisto. Rakennustekniikan laitos. 2015.

Yancheshmeh, Fatemeh Shokrollahi, Ke Chen, ja Joni-Kristian Kämäräinen "Hierarchical deformable part models for heads and tails". VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications . SCITEPRESS. 2018, 45-55. https://doi.org/10.5220/0006532700450055

Närhi, Mikko et al. "High Dynamic Range Single-Shot Spectral Measurements of Spontaneous Modulation Instability". Frontiers in Optics 2016. Optical Society of America (OSA). 2016.

Tukiainen, A. et al. "High efficiency dilute nitride solar cells: Simulations meet experiments". Journal of Green Engineering. 2016, 5(3-4). 113-132. https://doi.org/10.13052/jge1904-4720.5348

Kantola, Emmi et al. "High-efficiency yellow VECSEL with 20 W output power". Optics Days 2013, Helsinki, Finland: Oral presentation in Optics Days 2013, Helsinki, Finland. 2013.

Mateos, Xavier et al. "Highly-efficient Ho:KY(WO4)2 thin-disk lasers at 2.06 μm". Pacific-Rim Laser Damage 2018: Optical Materials for High-Power Lasers. Proceedings of SPIE. SPIE, IEEE. 2018. https://doi.org/10.1117/12.2316822

Zia, Nouman et al. "High performance GaSb superluminescent diodes for tunable light source at 2 μm and 2.55 μm". CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.28

Viheriälä, Jukka et al. "High-power 1550 nm tapered DBR lasers fabricated using soft UV-nanoimprint lithography". High-Power Diode Laser Technology and Applications XIV. SPIE Conference Proceedings. SPIE. 2016. https://doi.org/10.1117/12.2207423

Penttinen, Jussi-Pekka et al. "High power GaInNAs VECSEL emitting at 1230/615 nm". The European Conference on Lasers and Electro-Optics 2015. OSA. 2015.

Fedotov, Andrei et al. "High power picosecond MOPA with anisotropic ytterbium-doped tapered double-clad fiber"., Taccheo, S Mackenzie, JI Ferrari, M (toimittaneet). Proceedings of SPIE : Fiber Lasers and Glass Photonics: Materials through Applications. Proceedings of SPIE. SPIE-INT SOC OPTICAL ENGINEERING. 2018. https://doi.org/10.1117/12.2307693

Saad-Bin-Alam, Md et al. "High-Q resonance train in a plasmonic metasurface". 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings. IEEE. 2019. https://doi.org/10.23919/CLEO.2019.8750206

Nikkinen, Jari et al. "High repetition rate 1.34 µm Nd:YVO4 microchip laser Q-switched with GaInNAs SESAM". The European Conference on Lasers and Electro-Optics 2015. OSA. 2015.

Brobbey, Kofi J. et al. "High-speed manufacturing of antimicrobial paper". Paper Conference and Trade Show, PaperCon 2018. TAPPI Press. 2018, 564-566.

Matikainen, Ville et al. "High-temperature sliding wear behaviour of thermally sprayed Cr3C2-based coatings". Proceedings of The 17th Nordic Symposium on Tribology - NORDTRIB 2016. 2016.

Hokka, M. et al. "High Temperature Tension HSB Device Based on Direct Electrical Heating"., Song, Bo Casem, Daniel Kimberley, Jamie (toimittaneet). Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Conference Proceedings of the Society for Experimental Mechanics Series. Springer. 2015, 227-233. https://doi.org/10.1007/978-3-319-06995-1_34

Marttila, Tero et al. HKPro3 - Valtion tukemien homekorjaushankkeiden arviointi: Jatkotutkimus Tampereen teknillinen yliopisto. Rakennustekniikan laitos. Rakennetekniikka;Tutkimusraportti. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennustekniikka. 2015.

Silverajan, Bilhanan, Markku Vajaranta, ja Antti Kolehmainen "Home Network Security: Modelling Power Consumption to Detect and Prevent Attacks on Homenet Routers". Proceedings of the 11th Asia Joint Conference on Information Security (AsiaJCIS 2016), Fukuoka, Japan, August 4-5, 2016. IEEE. 2016, 9-16. https://doi.org/10.1109/AsiaJCIS.2016.10

Kankkunen, Tuukka ja Paavo Kero "Hometalolle suoritettavat toimenpiteet ja niiden valinta - case-esimerkki". ja Vinha, Juha Ruuska, Tiina (toimittaneet). Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015, 265-270.

Sandström, N. et al. "How is it sustainable? Identifying key indicators for sustainable educational design"., Gómes Chova, L. López Martínez, A. Candel Torres, I. (toimittaneet). 10th INTED 2016 Conference Proceedings: 7-9 March, 2016, Valencia, Spain. INTED proceedings. 2016, 4217-4219. https://doi.org/10.21125/inted.2016.2037

Baldauf, Carsten et al. "How mono-valent cations bend peptide turns and a first-principles database of amino acids and dipeptides"., Simos, Theodore E. Kalogiratou, Zacharoula Monovasilis, Theodore (toimittaneet). International Conference of Computational Methods in Sciences and Engineering 2014 (ICCMSE 2014). AIP Conference Proceedings. American Institute of Physics Inc. 2014, 119-120. https://doi.org/10.1063/1.4897692

Juuti, T. et al. "How to benefit from learning logs in engineering education?". 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016. European Society for Engineering Education SEFI. 2016.

Salmisto, Alpo "How to co-learn in campus."., Nenonen, Suvi, Kärnä, Sami Junnonen, Juha-Matti Tähtinen, Sari Sandström, Niclas (toimittaneet). Oppiva kampus - How to co-create campus?. Tampere: Suomen Yliopistokiinteistöt Oy. 2015, 320-337.

Aarikka-Stenroos, Leena et al. "How to develop a new innovation education tool: case of impact canvas". In the Proceedings of ISPIM Innovation Summit. The International Society for Professional Innovation Management (ISPIM). : 4-7 December 2016, Kuala Lumpur, Malaysia.. 2016.

Tappura, Sari, Noora Nenonen, ja Jouni Kivistö-Rahnasto "How to support managers’ commitment to safety management and leadership in organizations: good practices from the managers’ viewpoint". WOS 8th international conference - Book of Abstracts . 2015.

Reunanen, Tero. "Human Factor in Time Management". Procedia Manufacturing. 2015, 3. 709-716. https://doi.org/10.1016/j.promfg.2015.07.311

Rubel, Oleksii et al. "HVS-based local analysis of denoising efficiency for DCT-based filters". 2015 2nd International Scientific-Practical Conference Problems of Infocommunications Science and Technology, PIC S and T 2015 - Conference Proceedings. IEEE. 2015, 189-192. https://doi.org/10.1109/INFOCOMMST.2015.7357309

Linjama, Matti et al. "Hydraulic Hybrid Actuator: Theoretical Aspects and Solution Alternatives"., Laamanen, Arto Huhtala, Kalevi Uusi-Heikkilä, Janne (toimittaneet). Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power. Tampere: Tampere University of Technology. 2015.

Tuhtan, J.A. et al. "Hydrodynamic Classification of Natural Flows Using an Artificial Lateral Line and Frequency Domain Features". 36th IAHR World Congress. 2015.

Santinha, João et al. "icellfusion: Tool for fusion and analysis of live-cell images from time-lapse multimodal microscopy". Biometrics: Concepts, Methodologies, Tools, and Applications. IGI Global. 2016, 806-834. https://doi.org/10.4018/978-1-5225-0983-7.ch033

Mokhtarian, Hossein et al. "Identification of fundamental requirements for ideal metamodeling framework in additive manufacturing"., Aaltonen, Jussi ja Virkkunen, Riikka Koskinen, Kari T. Kuivanen, Risto (toimittaneet). Proceedings of the 2nd Annual SMACC Research Seminar 2017. 2017, 29-31.

Vasell, Tytti et al. "Identifying and measuring customer value - case multi-locational worker". ja Nielsen, Susanne Jensen, Per Anker (toimittaneet). Research papers for EuroFM's 15th research symposium at EFMC2016: 8-9 June 2016 in Milan, Italy. EuroFM. 2016, 143-151.

Peltola, Tero ja Saku Mäkinen "Identifying critical technology actors in waste flow management". PICMET'15 Conference, Management of the Technology Age: August 2-6, 2015, Hilton Portland and Executive Tower, Portland, Oregon, USA. United States: Portland International Center for Management of Engineering and Technology. 2015, 2027-2031. https://doi.org/10.1109/PICMET.2015.7273123

Jääskeläinen, Aki, Jussi Heikkilä ja Otto Thitz "Identifying the potential of performance measurement in supporting strategic purchasing and supply chain management". 8th conference on performance measurement and management control. Conference on Performance Measurement and Management Control. Nice, France: The European Institute for Advanced Studies in Management, EIASM. 2015, 1-21.

Jama, Teemu et al. Ideoita kaavoituksen sisällön uudistamiseen: Kaavojen merkintöjen ja määräysten kehittäminen (KAMMI-hanke) Helsinki: Ympäristöministeriö. 2018.

Aramo-Immonen, Heli, Mikko Vartio ja Jari Jussila "If you know social media, you see opportunities…". 12th International Forum on Knowledge Asset Dynamics: Knowledge Management in the 21th Century: Resilience, Creativity and Co-creation. 2017, 575-584.

Kylliäinen, Mikko , Joose Takala ja Valtteri Hongisto "Ilmaääneneristysluku sekä standardisoitu ja normalisoitu äänitasoeroluku huoneistojen välisen ilmaääneneristävyyden kuvaajina". Akustiikkapäivät 2015. Akustiikkapäivät. Kuopio: Akustinen seura. 2015, 158-161.

Pakkala, Toni et al. "Ilmastonmuutoksen vaikutus betonijulkisivujen vaurioitumisen etenemiseen". ja Vinha, Juha Ruuska, Tiina (toimittaneet). Rakennusfysiikka 2015: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut, 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015, 203-210.

Sorokin, M. et al. "Image-based characterization of the pulp flows". Pattern Recognition and Image Analysis. 2016, 26(3). 630-637. https://doi.org/10.1134/S1054661816030196

Mokammel, F. et al. "Impact analysis of graph-based requirements models using PageRank algorithm". 2013 IEEE International Systems Conference (SysCon). 2013 IEEE International Systems Conference (SysCon). IEEE. 2013, 731-736. https://doi.org/10.1109/SysCon.2013.6549964

Filippov, Valery et al. "Impact of Axial Profile of the Gain Medium on the Mode Instability in Lasers: Regular Versus Tapered Fibers". The European Conference on Lasers and Electro-Optics 2015. OSA. 2015.

Seppä, V.-P. et al. "Impedanssipneumografia pienten lasten alahengitytiesoireiden selvittelyssä". Allergiatutkimussäätiön vuosikirja 2015. Allergiakoulu. 2015.

Vajaranta, Markku, Joona Kannisto ja Jarmo Harju "Implementation Experiences and Design Challenges for Resilient SDN Based Secure WAN Overlays". 2016 11th Asia Joint Conference on Information Security (AsiaJCIS). IEEE. 2016, 17-23. https://doi.org/10.1109/AsiaJCIS.2016.25

Rekola, Jenni ja Teuvo Suntio "Implementing of Activating Learning Strategy for a Course on Electric Drives". SEFI 2016 Annual Conference Proceedings: Implementing of Activating Learning Strategy for a Course on Electric Drives. European Society for Engineering Education SEFI. 2016, 1-8.

Kurki, Vuokko et al. "Importance and challenges of sharing experiences among an international and interdisciplinary group of doctoral students". Ympäristöhistoria: Finnish Journal of Environmental History. 2015, (1/2015). 45-51.

Koponen, Pekka et al. "Improved modelling of electric loads for enabling demand response by applying physical and data-driven models: Project Response". 2018 IEEE International Energy Conference, ENERGYCON 2018. IEEE. 2018, 1-6. https://doi.org/10.1109/ENERGYCON.2018.8398794

Lahti, Johanna et al. "Improved properties for packaging materials by nanoscale surface modification and ALD barrier coating". TAPPI International Conference on Nanotechnology for Renewable Materials 2016. TAPPI Press. 2016, 684-706.

Vuorinen, Lauri ja Rami Sariola "Improving project control by combining earned value analysis and automatic data collection". International Research Network in Organizing by Projects Conference 2015: IRNOP. London, U.K. 2015, 1.

Leppänen, Aino ja Erkki Välimäki "Improving Recovery Boiler Availability through Understanding Fume Behavior". TAPPI PEERS Conference Proceedings, October 25-28, 2015. Atlanta, Georgia: TAPPI. 2015.

Galinina, Olga et al. "Improving reliability of replicated message delivery in cellular machine-type communications". 2016 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). IEEE. 2016, 106-110. https://doi.org/10.1109/ICUMT.2016.7765341

Haapanen, Jussi, Heidi Krohns-Välimäki, ja Pekka Verho "Improving the Situation Awareness of DSOs in Major Disturbances by Visualizing the State of Mobile Networks". CIRED Workshop 2016. 2016.

Wang, Yicheng et al. "In-band-pumped mode-locked Ho:YAG ceramic laser at 2.1 μm". 2016 Conference on Lasers and Electro-Optics (CLEO). IEEE. 2016, 1-2.

Amiot, Caroline G et al. "Incoherent Broadband Cavity Enhanced Absorption Spectroscopy Using a Supercontinuum Source in the Mid-IR". Laser Science 2015: Proceedings Frontiers in Optics 2015. 2015. https://doi.org/10.1364/FIO.2015.JTu4A.80

Amiot, Caroline et al. "Incoherent Broadband Cavity Enhanced Absorption Spectroscopy with a Supercontinuum Source". 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference: Proceedings. Optical Society of America. 2015, CH_P_16.

Kopra, Miia-Johanna et al. "Increasing Employee Involvement in Socially Sustainable Manufacturing: Two Methods for Capturing Employees’ Tacit Knowledge to Improve Manufacturing Processes". Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015, Proceedings, Part II. IFIP Advances in Information and Communication Technology. Springer International Publishing. 2015, 539-546. https://doi.org/10.1007/978-3-319-22759-7_62

Pertilä, Pasi ja Alessio Brutti "Increasing the environment-awareness of rake beamforming for directive acoustic sources". 15th International Workshop on Acoustic Signal Enhancement (IWAENC). 2016.

Nenonen, Sanna , Eija Vaittinen, ja Miia Martinsuo "Incremental service innovations in a manufacturing firm’s delivery chain". 23rd Innovation and Product Development Management Conference (IPDMC): Glasgow, U. K. June 12-14, 2016. Innovation and Product Development Management Conference. 2016.

Müller, Philipp et al. "Indoor Localisation using Aroma Fingerprints: A First Sniff". 2017 14th Workshop on Positioning, Navigation and Communications (WPNC). Bremen, Germany: IEEE. 2017. https://doi.org/10.1109/WPNC.2017.8250046

Martinsuo, Miia ja Eija Vaittinen "Industrial customers’ organizational readiness for service innovations: Adopting data-based advanced services". Proceedings of the 25th Innovation and Product Development Management Conference. International Product Development Management Conference. European Institute for Advanced Studies in Management, EIASM. 2018.

Järvinen, Hannu-Matti ja Tommi Mikkonen "Industrial impact on topics and types of Master's theses: Empirical study of software engineering theses made in 1990-2016". ja Järvinen, Hannu-Matti Clark, Robin (toimittaneet). Proceedings of SEFI 2016 Annual Conference. European Society for Engineering Education SEFI. 2016.

Riipinen, Tuomas et al. Industrialization of hybrid and additive manufacturing-Implementation to Finnish industry (HYBRAM) Research Reports. VTT Technical Research Centre of Finland. 2018.

Rajala, Satu ja Jukka Lekkala "Infant respiration and heart rate monitoring with EMFi sensor". Holub, Jan (toim.). IMEKO XXI World Congress, Proceedings, August 30 - September 4, 2015, Prague, Czech Republic. 2015.

Turunen, Esko ja Mirko Navara "Infinitesimals and Pavelka logic"., Alonso, JM Bustince, H Reformat, M (toimittaneet). PROCEEDINGS OF THE 2015 CONFERENCE OF THE INTERNATIONAL FUZZY SYSTEMS ASSOCIATION AND THE EUROPEAN SOCIETY FOR FUZZY LOGIC AND TECHNOLOGY. Advances in Intelligent Systems Research. PARIS: Atlantis Press. 2015, 1027-1033. https://doi.org/10.2991/ifsa-eusflat-15.2015.145

Okun, Oleksandr, Yurii Kravchenko ja Leena Korpinen. "Influence of environmental conditions on EMF levels in a span of overhead transmission lines". Progress in Electromagnetics Research C. 2016, 63. 163-171. https://doi.org/10.2528/PIERC16021106

Silwal, Bishal et al. "Influence of the rotor eccentricity on the torque of a cage induction machine". Archives of Electrical Engineering. 2017, 66(2). 383-396. https://doi.org/10.1515/aee-2017-0029

Parrotta, Daniele et al. "InGaAs-QW VECSEL emitting >1.300-nm via intracavity Raman conversion". Vertical External Cavity Surface Emitting Lasers (VECSELs) VI. Proceedings of SPIE. 2016. https://doi.org/10.1117/12.2217593

Aarikka-Stenroos, Leena, Lise Aaboen ja Aron Rolfsen "Initiation processes and initiation contributors illustrated by Norwegian-South Korean business relationships". ja Vagn Freytag, Per Höjbjerg Clarke, Ann (toimittaneet). The 31st IMP Conference 2015, Kolding, Denmark.. Kolding, Denmark. 2015.

Khorramdel, Behnam, Thomas M Kraft, ja Matti Mäntysalo. "Inkjet printed metallic micropillars for bare die flip-chip bonding". Flexible and Printed Electronics. 2017, 2(4). 045005. https://doi.org/10.1088/2058-8585/aa9171

Katko, Tapio S. ja Jarmo J. Hukka "Institutional development is the key for sustainable water services in the built environment". ja Nenonen, S. Junnonen, J-M. (toimittaneet). Proceedings of the CIB World Building Congress 2016: Volume IV - Understanding impacts and functioning of different solutions. Tampere: Tampere University of Technology. Department of Civil Engineering. 2016, 419-430.

Jaakkola, Elina, Leena Aarikka-Stenroos ja Lauri Salmivalli "Institutionalizing a service innovation in complex networks: The case of developing and diffusing electronic prescription in Finland.". ja Vagn Freytag, Per Höjbjerg Clarke, Ann (toimittaneet). The 31st Annual IMP Conference and Doctoral Colloquium 2015, Kolding, Denmark.. 2015.

Asp, Olli ja Anssi Laaksonen "Instrumentation and monitoring of large-span culvert built under a railway, in Finland". ja Madaj, Arkadiusz Jankowiak, Iwona (toimittaneet). Archives of Institute of Civil Engineering: 3rd European Conference on Buried Flexible Steel Structures, Rydzyna, Poland, 24-25 April 2017. 23 udg., Poznan: Wydawnictwo Politechniki Poznanskiej. 2017, 53-60. https://doi.org/10.21008/j.1897-4007.2017.23.05

Karioja, Pentti et al. "Integrated multi-wavelength mid-IR light source for gas sensing". Next-Generation Spectroscopic Technologies XI. SPIE Conference Proceedings. SPIE, IEEE. 2018. https://doi.org/10.1117/12.2305712

Hukka, Jarmo J., Ezekiel Nyangeri Nyanchaga, ja Tapio S. Katko "Integrated urban water management, the green economy and institutional eco-innovations". ja Saari, Arto Huovinen, P. (toimittaneet). Proceedings of the CIB World Building Congress 2016: Volume III - Building up business operations and their logic. Shaping materials and technologies. Tampere: Tampere University of Technology. Department of Civil Engineering. 2016, 260-271.

Aalto, Timo et al. "Integrating III-V, Si, and polymer waveguides for optical interconnects: RAPIDO". Optical Interconnects XVI. Proceedings of SPIE. SPIE. 2016. https://doi.org/10.1117/12.2214786

Väätäjä, Heli ja Aino Ahtinen "Integrating mobile orienteering to team forming activity in a software engineering course". SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation. European Society for Engineering Education SEFI. 2016.

Christophe, François et al. "Integration of evaluation and simulation methods for virtual prototypes". Proceedings of the 15th International Conference on Engineering and Product Design Education: Design Education - Growing Our Future, EPDE 2013. 2013, 623-628.

Toenger, Shanti et al. "Intensity Interferometry of Supercontinuum Light"., Setälä, Tero ja Turunen, Jari T. Friberg, Ari Saastamoinen, Kimmo (toimittaneet). Trends in Electromagnetic Coherence. Publications of the University of Eastern Finland. Reports and studies in forestry and natural sciences; 32. Joensuu: University of Eastern Finland. 2018.

Sörensen, Johanna et al. "Interdisciplinary water research network building within Nordic and Baltic countries.". Vatten. 2015, (71). 79-83.

Smith, Jarrod et al. "Internal Heat Generation in Tension Tests of AISI 316 Using Full-Field Temperature and Strain Measurements". Advancement of Optical Methods in Experimental Mechanics, Volume 3. Conference Proceedings of the Society for Experimental Mechanics Series. Conference Proceedings of the Society for Experimental Mechanics. Springer New York LLC. 2018, 97-103. https://doi.org/10.1007/978-3-319-63028-1_16

Tuokko, Reijo , Minna Lanz ja Pasi Luostarinen, toim. International Workshop on MicroFactories (IWMF 2012): 17th-20th June 2012 Tampere Hall Tampere, Finland Tampere University of Technology. Department of Production Engineering. 2012.

Mäkinen, S.J. "Internet-of-things disrupting business ecosystems: A case in home automation". IEEM 2014: 2014 IEEE International Conference on Industrial Engineering and Engineering Management. IEEE COMPUTER SOCIETY PRESS. 2015, 1467-1470. https://doi.org/10.1109/IEEM.2014.7058882

Balandin, Sergey, Sergey Andreev, ja Yevgeni Koucheryavy, toim. Internet of Things, Smart Spaces, and Next Generation Networks and Systems: 15th International Conference, NEW2AN 2015, and 8th Conference, ruSMART 2015, St. Petersburg, Russia, August 26-28, 2015, Proceedings Lecture Notes in Computer Science. Springer International Publishing. 2015. https://doi.org/10.1007/978-3-319-23126-6

Meriläinen, Kirsi, Vilma Vuori, ja Nina Helander "Inter-organizational knowledge sharing barriers within an sme network: a case study". Proceedings of the 18th European Conference on Knowledge Management: Barcelona, Spain, 7-8 September 2017. Reading, UK: Academic Conferences and Publishing International Limited. 2017, 690-697.

Ritola, Tuomas ja Eric Coatanea "Interplay between offering, provider and customer in product-service system design"., Lindemann, U, Venkataraman, S ja Kim, YS Lee, SW DeWeck, O Hong, YS (toimittaneet). Proceedings of the 19th International Conference on Engineering Design (ICED13), Design for Harmonies, Vol.4: Product, Service and Systems Design , Seoul, Korea, 19-22.08.2013. International Conference on Engineering Design. DESIGN SOC. 2013.

Tiira, Jonna et al. "Intracavity double diode structures with GaInP barrier layers for thermophotonic cooling". Proc. SPIE 10121: Optical and Electronic Cooling of Solids II. Proceedings of SPIE. SPIE. 2017. https://doi.org/10.1117/12.2250843

Drossos, Konstantinos et al. "Investigating Auditory Human-Machine Interaction: Analysis and Classification of Sounds Commonly Used by Consumer Devices". Audio Engineering Society Convention 134. AES Audio Engineering Society. 2013.

Palanivel, Suresh et al. "In vitro characterization of arylhydrazones of active methylene derivatives". Saudi Pharmaceutical Journal. 2018, 26(3). 430-436. https://doi.org/10.1016/j.jsps.2017.12.018

Goncalves, Nadia S.M. et al. "In vivo single-molecule dynamics of transcription of the viral T7 Phi 10 promoter in Escherichia coli". The 8th International Conference on Bioinformatics, Biocomputational Systems and Biotechnologies (BIOTECHNO2016). IARIA. 2016, 9-15.

Rundgren, Aatu, Jorma Joutsenlahti, ja Jari Mäkinen "Is languaging experienced to improve understanding of structural mechanics?". 44th SEFI 2016 Annual Conference: 12-15 September 2016 in Tampere, Finland. 2016.

Lilja, Kari "Jossakin vuoti öljy, muualla tihkuivat tiedot - etiikka katoavien rajojen ja suurten skandaalien aikakaudella". Silmät auki It-etiikkaan. Eduskunnan tulevaisuusvaliokunnan julkaisu; 12. EDUSKUNNAN TULEVAISUUSVALIOKUNTA. 2015, 85-101.

Kotilainen, Sini , Markku Hedman ja Jonna Heikkinen, toim. Joustavat asuinympäristöt: 10 visiota aikaa kestävään kaupunkiasumiseen Housing Design. Tampere: Tampereen teknillinen yliopisto. Arkkitehtuurin laitos. 2015.

Schelkens, Peter et al. "JPEG Pleno: a standard framework for representing and signaling plenoptic modalities". SPIE Proceedings Volume 10752: Applications of Digital Image Processing XLI. SPIE Conference Proceedings. SPIE. 2018.

Pakkala, Toni et al. "Julkisivujen ja parvekkeiden talvikorjausohje". ja Vinha, Juha Kivioja, Henna (toimittaneet). Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut, 24-26.10.2017, Tampere. Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017, 179-184.

Virtanen, Janne et al. "Kactus2: A graphical EDA tool built on the IP-XACT standard". The Journal of Open Source Software. 2017, 2(13). 1. https://doi.org/10.21105/joss.00151

Rajaniemi, Juho , Jon Thureson, ja Minna Chudoba, toim. Kangasalan Lamminrahka. Yhdyskuntasuunnittelun ammattikurssi 1 2015 Tampere: Tampere University of Technology, School of Architecture. 2015.

Koponen, Olli-Paavo. "Kangasala-talo: Vanhan kulttuuripitäjän uusi kulttuuritalo". Arkkitehti. 2015, 2015(4/2015). 67-69.

Tuominen, Eero ja Juha Vinha "Kapillaaristen vedenimuominaisuuksien määrittämiseen sopivan vapaan vedenimukoelaitteiston kehittäminen". ja Vinha, Juha Ruuska, Tiina (toimittaneet). Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015, 233-238.

Helamaa, Anna . "Kattavasti rivitaloista". Arkkitehti. 2015, (3). 80-81.

Rantala, Tuuli et al. Kävelystä elinvoimaa Tampere: Tampereen teknillinen yliopisto. Liikenteen tutkimuskeskus Verne. 2014.

Kaarakka, Terhi Elina, Simo Ali-Löytty ja Miika Huhtanen. "Kehittämistutkimus: vuorovaikutteisten Matlab-opetusohjelmien vaikutus minäpystyvyyteen ja oppimistuloksiin yliopistomatematiikassa". FMSERA Journal . 2018, 2(1). 67-77.

Ainasoja, Antti E. et al. "Keyframe-based video summarization with human in the loop". VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications . SCITEPRESS. 2018, 287-296. https://doi.org/10.5220/0006619202870296

Sarjala, Satu-Maaria "Kids Out! Urban environments and physical activity among children and adolescents". 2013 Active Living Research (ALR) Annual Conference in San Diego, CA. 2013.

Loukola-Ruskeeniemi, Kirsti et al. Kiviaines- ja luonnonkiviteollisuuden kehitysnäkymät Työ- ja elinkeinoministeriön julkaisuja; 54. Helsinki: Työ- ja elinkeinoministeriö. 2015.

Vuori, Vilma ja Nina Helander "Knowledge barriers in university-industry knowledge networks". 17th European Conference on Knowledge Management, At Belfast, Northern Ireland, UK.: 1-2 Sep. 2016. Academic Conferences and Publishing International Limited Reading. 2016, 952-959.

Mäenpää, Sari , Anu Suominen, ja Rainer Breite "Knowledge integration method development for multi-stakeholder innovation". Proceedings of The XXVII ISPIM Conference 2016 Porto, Portugal - 19-22 June 2016 : Blending Tomorrow’s Innovation Vintage. 2016.

Ammirato, Salvatore et al. "Knowledge Management and Emerging Collaborative Networks in Tourism Business Ecosystems". ja Massaro, Maurizzio Garlatti, Andrea (toimittaneet). Proceedings of the 16th European Conference on Knowledge Management (ECKM 2015), University of Udine, Italy, 3-4 September 2015. Reading, UK: Academic Conferences and Publishing International Limited. 2015, 19-26.

Väyrynen, Hannele ja Nina Helander "Knowledge Management operationalization – how it differs in large enterprises and SMEs in Finland". 23rd Nordic Academy of Management Conference: NFF 2015. Nordic Academy of Management. 2015, 1-27.

Väyrynen, Hannele, Nina Helander ja Marianne Kukko. "Knowledge Management Practices in Large Companies". The Macrotheme Review. 2014, 3(9). 56-72.

Vuori, Vilma ja Nina Helander "Knowledge management practices to overcome network-level knowledge barriers: an artificial intelligence powered literature review". Proceedings of International Forum on Knowledge Asset Dynamics 2019: 5-7 June 2019, Matera, Italy. IFKAD Proceedings eBooks. 2019.

Suominen, Anu Helena ja Sari Mäenpää "Knowledge sharing in knowledge collectivity: case digitalization in industrial network"., Marimon, Frederic ja Mas-Machuca, Marta Berbegal-Mirabent, Jasmina Bastida, Ramon (toimittaneet). Proceedings of the 18th European Conference on Knowledge Management ECKM 2017: 7-8 September 2017, Barcelona, Spain. Academic Conferences and Publishing International. 2017, 956-963.

Palvalin, Miikka, Vilma Vuori, ja Nina Helander "Knowledge transfer and work productivity"., Spender, JC Schiuma, Giovanni Gavrilova, Tatiana (toimittaneet). Proceedings of 12th International Forum on Knowledge Asset Dynamics: St. Petersburgh, Russia 7-9 June 2017. Proceedings IFKAD. 2017, 1120-1134.

Laak, Mikko ja Juan Del Barrio Batista, toim. Kohti kestävää Skanssia Tampereen teknillinen yliopisto. Arkkitehtuurin laitos. 2014.

Katko, Tapio S. "Kohti tasapuolisempaa tutkimuksen arviointia: Pääkirjoitus". Ympäristöhistoria: Finnish Journal of Environmental History. 2015, 5(1). 4-5.

Hilliaho, Kimmo , Birgitta Nordquist ja Petter Wallentén "Koko Julkisivua peittävän lasijulkisivun vaikutus Etelä-Ruotsissa sijaitsevan rakennuksen energiatehokkuuteen". ja Vinha, Juha Ruuska, Tiina (toimittaneet). Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu 4; 4. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015, 509-516.

Järveläinen, Matti et al. "Kolloidisten suspensioiden online -analysointi: tutkimuksesta liiketoimintaa". Materia. 2015, (5/2015). 54-57.

Annila, Petri et al. "Kosteus- ja mikrobivaurioiden laajuus kuntien rakennuksissa". ja Säteri, Jorma Ahola, Mervi (toimittaneet). Sisäilmastoseminaari 2015 SIY Raportti 33, Messukeskus, Helsinki 11.3.2015. SIY Raportti. Juva. 2015, 95-100.

Annila, Petri et al. "Kosteusvaurioiden vakavuus kuntien rakennuksissa". ja Vinha, Juha Kivioja, Henna (toimittaneet). Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017, 135-140.

Chudoba, Minna . "Koteja ja kokonaistaideteoksia". Arkkitehti. 2015, (3). 76-78.

Ruusala, Annu ja Juha Vinha "Koulujen ja päiväkotien laskettu ja toteutunut energiankulutus". ja Vinha, Juha Kivioja, Henna (toimittaneet). Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017, 267-274.

Sekki, Pauli, Lauri Korhonen, ja Juha Vinha "Kuorielementtien kuivumisen mallintaminen hydrataation huomioivalla FEM-laskennalla". ja Vinha, Juha Kivioja, Henna (toimittaneet). Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka. . Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017, 399-405.

Jokisalo, Juha et al. "Kustannusoptimaaliset energiakorjaus- ja uusiutuvan energian tuotannon ratkaisut kunnallisissa palvelurakennuksissa". ja Vinha, Juha Kivioja, Henna (toimittaneet). Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017, 287-292.

Tuominen, Eero ja Juha Vinha "Laastien vedenimukertoimen määrittämisen virhelähdekokeet". ja Vinha, Juha Ruuska, Tiina (toimittaneet). Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015, 239-244.

Ruuska, Tiina ja Juha Vinha "Laastin ja betonin lämmönjohtavuuden ja ominaislämpökapasiteetin määrittäminen lämpövirtalevylaitteella". ja Vinha, Juha Ruuska, Tiina (toimittaneet). Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015, 227-232.

Lahdelma, Ilmari Lahdelma & Mahlamäki Architects: Works Rakennustieto. 2014.

Rissanen, Joona et al. "Large mode area double clad ytterbium tapered fiber with circular birefringency". ja Carter, Adrian L. Dong, Liang (toimittaneet). Proceedings of SPIE : Fiber Lasers XVI: Technology and Systems. Proceedings of SPIE. SPIE-INT SOC OPTICAL ENGINEERING. 2019. https://doi.org/10.1117/12.2508811

Uotila, Ulrika, Arto Saari, ja Juha-Matti Junnonen "Laser Scanning Tasks of Building Refurbishment Project". Proceendings of the 17th International Conference on Computing in Civil and Building Engineering (ICCCBE). 2018.

Hilliaho, Kimmo, Jukka Hietaniemi ja Panu Visa. "Lasitettujen parvekkeiden ja terassien käyttäytyminen tulipaloissa". Palontorjuntatekniikka. 2015, (Erikoisnumero). 18-23.

Laukkarinen, Anssi ja Kimmo Hilliaho "Lasitetun parvekkeen lämpötilan ja lämpöhäviöiden laskenta". ja Vinha, Juha Ruuska, Tiina (toimittaneet). Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; 4. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015, 181-186.

Lehtonen, T. et al. "Leadership instead of grading - The new goals of assessment". 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016. European Society for Engineering Education SEFI. 2016.

Tokola, Henri, Esko Niemi ja Ville Väistö "Lean manufacturing methods in simulation literature: Review and association analysis". 2015 Winter Simulation Conference (WSC). 2016, 2239-2248. https://doi.org/10.1109/WSC.2015.7408336

Olsson, Thomas et al. "Lean Software Design, Lean Education? Lessons from a Collaborative University-Industry Seminar". SEFI’16 - 44th Annual Conference of the European Society for Engineering Education. European Society for Engineering Education SEFI. 2016.

Heikkilä, Jussi ja Miia Martinsuo. "Lean-tuotanto ja sen johtaminen: onnistuminen, haasteet ja soveltuminen Suomen yrityksiin ja muihin organisaatioihin". Työpoliittinen aikakauskirja. 2015, (3). 18-24.

Takala, Annina "Learning for sustainable water and sanitation services". Mazijn, B. (toim.). Proceedings of the 8th International Conference on Engineering Education for Sustainable Development (Bruges, 4-7 September 2016) : Building a circular economy together. Brugge: Instituut vóór Duu rzame Ontwikkeling vzw. 2016, 250-258.

Vainio, Teija ja Tanja Walsh "Learning maths with mobiles: Cross-cultural design of technology with experiences in South-Africa and Finland". Integrating Touch-Enabled and Mobile Devices into Contemporary Mathematics Education. IGI Global. 2015, 79-96. https://doi.org/10.4018/978-1-4666-8714-1.ch004

Vainio, Teija ja Tanja Walsh "Learning Maths with mobiles: Cross-cultural design of technology with experiences in South-Africa and Finland". Blended Learning: Concepts, Methodologies, Tools, and Applications. IGI Global. 2016, 741-759. https://doi.org/10.4018/978-1-5225-0783-3.ch037

Myllärniemi, Jussi, Samuli Pekkola, ja Nina Helander "Lessons for data-based value creation". 12th International Forum on Knowledge Asset Dynamics, IFKAD 2017. Proceedings IFKAD. 2017, 398-407.

Huovinen, Pekka "Leveraging concepts for environmentally sustainable business management in construction - a focused review". Egbu , Charles (toim.). CIB Proceedings 2015 : Going North for Sustainability: Leveraging Knowledge and Innovation for Sustainable Construction and Development. London, UK: IBEA Publications Ltd. 2015, 286-296.

Lepistö, Timo, toim. Life Beyond the Binary Code: Select Prose and Poetry Tampere University of Technology, Language Center. 2014.

Vihola, Jaakko ja Harry Edelman "Life-Cycle Economics of Rentable Prefabricated School Facility Units in Municipal Real Estate Procurement". Proceedings of the CIB World Building Congress 2016: Volume V: Advancing Products and Services. Tampere University of Technology. Department of Civil Engineering. 2016, 76-87.

Martinsuo, Miia et al. "Lifecycle-oriented framing of value at the front end of infrastructure projects". Proceedings of EURAM18 European Academy of Management conference 2018. EURAM conference. European Academy of Management, EURAM. 2018.