Mettänen, M & Hirn, U 2015, 'A comparison of five optical surface topography measurement methods', TAPPI Journal, Vuosikerta. 14, Nro 1, Sivut 27-38.

Juoksukangas, J, Lehtovaara, A & Mäntylä, A 2016, 'A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact', Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology, Vuosikerta. 230, Nro 10, Sivut 1273-1287. https://doi.org/10.1177/1350650116633573

Koivumäki, J & Mattila, J 2017, 'Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps', Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME, Vuosikerta. 139, Nro 10, 101008. https://doi.org/10.1115/1.4036537

Laakkonen, P & Quadrat, A 2017, 'A fractional representation approach to the robust regulation problem for SISO systems', Systems and Control Letters, Vuosikerta. 103, Sivut 32-37. https://doi.org/10.1016/j.sysconle.2017.02.006

Coatanéa, E, Ritola, T, Tumer, IY & Jensen, D 2010, A framework for building behavioral models for design-stage failure identification using dimensional analysis. julkaisussa Proceedings of the ASME Design Engineering Technical Conference. Vuosikerta. 5, AMER SOC MECHANICAL ENGINEERS, Sivut 591-601, Kanada, 15/08/10. https://doi.org/10.1115/DETC2010-28864

Syrjärinne, P, Nummenmaa, J, Thanisch, P, Kerminen, R & Hakulinen, E 2015, 'Analysing traffic fluency from bus data', IET Intelligent Transport Systems, Vuosikerta. 9, Nro 6, Sivut 566-572. https://doi.org/10.1049/iet-its.2014.0192

Krogerus, T, Hyvönen, M & Huhtala, K 2018, 'Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors', Fuel, Vuosikerta. 216, Sivut 1-9. https://doi.org/10.1016/j.fuel.2017.11.152

Gashti, EHN, Malaska, M & Kujala, K 2015, 'Analysis of thermo-active pile structures and their performance under groundwater flow conditions', Energy and Buildings, Vuosikerta. 105, Sivut 1-8. https://doi.org/10.1016/j.enbuild.2015.07.026

Wani, OM, Verpaalen, R, Zeng, H, Priimagi, A & Schenning, APHJ 2019, 'An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks', Advanced Materials, Vuosikerta. 31, Nro 2, 1805985. https://doi.org/10.1002/adma.201805985

Colace, L, Santoni, F & Assanto, G 2013, 'A near-infrared optoelectronic approach to detection of road conditions', Optics and Lasers in Engineering, Vuosikerta. 51, Nro 5, Sivut 633-636. https://doi.org/10.1016/j.optlaseng.2013.01.003

Schoeppner, RL, Mohanty, G, Polyakov, MN, Petho, L, Maeder, X & Michler, J 2020, 'An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films', Materials and Design, Vuosikerta. 195, 108907. https://doi.org/10.1016/j.matdes.2020.108907

Saintsing, CD, Cook, BS & Tentzeris, MM 2014, An origami inspired reconfigurable spiral antenna. julkaisussa 38th Mechanisms and Robotics Conference. Vuosikerta. 5B, The American Society of Mechanical Engineers ASME, Buffalo, Yhdysvallat, 17/08/14. https://doi.org/10.1115/DETC201435353

Pyrhönen, V-P, Koivisto, H & Vilkko, M 2017, A Reduced-Order Two-Degree-of-Freedom Composite Nonlinear Feedback Control for a Rotary DC Servo Motor. julkaisussa Proceedings of the 56th IEEE Conference on Decision and Control. Melbourne, Australia, Sivut 2065-2071, IEEE CONFERENCE ON DECISION AND CONTROL, 1/01/00. https://doi.org/10.1109/CDC.2017.8263951

Sanchez-Guevara, C, Núñez Peiró, M, Taylor, J, Mavrogianni, A & Neila González, J 2019, 'Assessing population vulnerability towards summer energy poverty: Case studies of Madrid and London', Energy and Buildings, Vuosikerta. 190, Sivut 132-143. https://doi.org/10.1016/j.enbuild.2019.02.024

Saarimaa, V, Fuertes, N, Persson, D, Zavalis, T, Kaleva, A, Nikkanen, J-P, Levänen, E & Heydari, G 2020, 'Assessment of pitting corrosion in bare and passivated (wet scCO2-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS)', Materials and Corrosion. https://doi.org/10.1002/maco.202011653

Paunonen, L & Seifert, D 2020, 'Asymptotics and approximation of large systems of ordinary differential equations', Systems and Control Letters, Vuosikerta. 140, 104703. https://doi.org/10.1016/j.sysconle.2020.104703

Caraffi, C, Vojir, T, Trefný, J, Šochman, J & Matas, J 2012, A system for real-time detection and tracking of vehicles from a single car-mounted camera. julkaisussa 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012., 6338748, Sivut 975-982, Anchorage, AK, Yhdysvallat, 16/09/12. https://doi.org/10.1109/ITSC.2012.6338748

Jaurola, M, Hedin, A, Tikkanen, S & Huhtala, K 2019, 'A TOpti simulation for finding fuel saving by optimising propulsion control and power management', Journal of Marine Science and Technology (Japan). https://doi.org/10.1007/s00773-019-00651-2

Juoksukangas, J, Hintikka, J, Lehtovaara, A, Mäntylä, A, Vaara, J & Frondelius, T 2020, 'Avoiding the high friction peak in fretting contact', Rakenteiden Mekaniikka, Vuosikerta. 53, Nro 1, Sivut 12-19. https://doi.org/10.23998/rm.76266

Santa-aho, S, Laitinen, A, Sorsa, A & Vippola, M 2019, 'Barkhausen Noise Probes and Modelling: A Review', Journal of Nondestructive Evaluation, Vuosikerta. 38, Nro 4, 94. https://doi.org/10.1007/s10921-019-0636-z

Lindgren, M, Santa-aho, S & Vippola, M 2016, 'Barkhausen noise response of three different welded duplex stainless steels', Insight, Vuosikerta. 58, Nro 9, Sivut 480-486. https://doi.org/10.1784/insi.2016.58.9.480

Huttunen-Saarivirta, E, Isotahdon, E, Metsäjoki, J, Salminen, T, Ronkainen, H & Carpén, L 2019, 'Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion', Tribology International, Vuosikerta. 129, Sivut 257-271. https://doi.org/10.1016/j.triboint.2018.08.021

Vuornos, K, Ojansivu, M, Koivisto, JT, Häkkänen, H, Belay, B, Montonen, T, Huhtala, H, Kääriäinen, M, Hupa, L, Kellomäki, M, Hyttinen, J, Ihalainen, JA & Miettinen, S 2019, 'Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels', Materials Science and Engineering C, Vuosikerta. 99, Sivut 905-918. https://doi.org/10.1016/j.msec.2019.02.035

Yang, D, Feng, Y, Behl, M, Lendlein, A, Zhao, H, Khan, M & Guo, J 2012, Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate). julkaisussa Multifunctional Polymer-Based Materials. Vuosikerta. 1403, Sivut 171-176, Boston, MA, Yhdysvallat, 28/11/11. https://doi.org/10.1557/opl.2012.702

Borah, D, Rasappa, S, Kosmala, B, Holmes, JD & Morris, MA 2012, Block copolymer self-assembly on ethylene glycol (EG) self-assembled monolayer (SAM) for nanofabrication. julkaisussa Nanoscale Materials Modification by Photon, Ion, and Electron Beams. Vuosikerta. 1450, Sivut 8-13, San Francisco, CA, Yhdysvallat, 9/04/12. https://doi.org/10.1557/opl.2012.1224

Martinez, F, Neculqueo, G, Vasquez, SO, Lemmetyinen, H, Efimov, A & Vivo, P 2015, Branched thiophene oligomer/polymer bulk heterojunction organic solar cell. julkaisussa Materials Research Society Symposium Proceedings. Vuosikerta. 1737, MATERIALS RESEARCH SOCIETY, Sivut 19-25, MATERIALS RESEARCH SOCIETY SYMPOSIUM, 1/01/00. https://doi.org/10.1557/opl.2015.529

Olin, M & Dal Maso, M 2020, 'CFD modeling the diffusional losses of nanocluster-sized particles and condensing vapors in 90° bends of circular tubes', Journal of Aerosol Science, Vuosikerta. 150, 105618. https://doi.org/10.1016/j.jaerosci.2020.105618

Juoksukangas, J, Nurmi, V, Hintikka, J, Vippola, M, Lehtovaara, A, Mäntylä, A, Vaara, J & Frondelius, T 2019, 'Characterization of cracks formed in large flat-on-flat fretting contact', International Journal of Fatigue, Vuosikerta. 124, Sivut 361-370. https://doi.org/10.1016/j.ijfatigue.2019.03.004

Isotahdon, E, Huttunen-Saarivirta, E & Kuokkala, V 2017, 'Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets', Journal of Alloys and Compounds, Vuosikerta. 692, Sivut 190-197. https://doi.org/10.1016/j.jallcom.2016.09.058

Fafarman, AT, Hong, SH, Caglayan, H, Ye, X, Diroll, BT, Paik, T, Engheta, N, Murray, CB & Kagan, CR 2013, 'Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals', Nano Letters, Vuosikerta. 13, Nro 2, Sivut 350-357. https://doi.org/10.1021/nl303161d

Kanerva, U, Karhu, M, Lagerbom, J, Kronlöf, A, Honkanen, M, Turunen, E & Laitinen, T 2016, 'Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis', International Journal of Refractory Metals and Hard Materials, Vuosikerta. 56, Sivut 69-75. https://doi.org/10.1016/j.ijrmhm.2015.11.014

Mashayekhi, M, Winchester, L, Laurila, M-M, Mäntysalo, M, Ogier, S, Terés, L & Carrabina, J 2017, 'Chip-by-chip configurable interconnection using digital printing techniques', Journal of Micromechanics and Microengineering, Vuosikerta. 27, Nro 4, 045009. https://doi.org/10.1088/1361-6439/aa5ef3

Belardini, A, Leahu, G, Petronijevic, E, Hakkarainen, T, Koivusalo, E, Piton, MR, Talmila, S, Guina, M & Sibilia, C 2020, 'Circular dichroism in the second harmonic field evidenced by asymmetric AU coated gaas nanowires', Micromachines, Vuosikerta. 11, Nro 2, Sivut 1-8. https://doi.org/10.3390/mi11020225

Wang, H, Feng, Y, Fang, Z, Yuan, W & Khan, M 2012, 'Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering', Materials Science and Engineering C: Materials for Biological Applications, Vuosikerta. 32, Nro 8, Sivut 2306-2315. https://doi.org/10.1016/j.msec.2012.07.001

Paris, H, Mokhtarian, H, Coatanéa, E, Museau, M & Ituarte, IF 2016, 'Comparative environmental impacts of additive and subtractive manufacturing technologies', CIRP Annals: Manufacturing Technology, Vuosikerta. 65, Nro 1, Sivut 29-32. https://doi.org/10.1016/j.cirp.2016.04.036

Ghabcheloo, R & Siddiqui, S 2018, Complete Odometry Estimation of a Vehicle Using Single Automotive Radar and a Gyroscope. julkaisussa MED 2018 - 26th Mediterranean Conference on Control and Automation., 8442474, IEEE, Sivut 855-860, Zadar, Kroatia, 19/06/18. https://doi.org/10.1109/MED.2018.8442474

Javaheri, V, Nyyssönen, T, Grande, B & Porter, D 2018, 'Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium', Journal of Materials Engineering and Performance, Vuosikerta. 27, Nro 6, Sivut 2978-2992. https://doi.org/10.1007/s11665-018-3376-9

Lanz, M & Tuokko, R 2017, 'Concepts, methods and tools for individualized production', PRODUCTION ENGINEERING, Vuosikerta. 11, Nro 2, Sivut 205-212. https://doi.org/10.1007/s11740-017-0728-5

Evans, DM, Holstad, TS, Mosberg, AB, Småbråten, DR, Vullum, PE, Dadlani, AL, Shapovalov, K, Yan, Z, Bourret, E, Gao, D, Akola, J, Torgersen, J, van Helvoort, ATJ, Selbach, SM & Meier, D 2020, 'Conductivity control via minimally invasive anti-Frenkel defects in a functional oxide', Nature Materials. https://doi.org/10.1038/s41563-020-0765-x

Välikangas, T & Karvinen, R 2018, 'Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger', Heat Transfer Engineering, Vuosikerta. 39, Nro 13-14, Sivut 1192-1200. https://doi.org/10.1080/01457632.2017.1363628

Sekki, T, Andelin, M, Airaksinen, M & Saari, A 2016, 'Consideration of energy consumption, energy costs, and space occupancy in Finnish daycare centres and school buildings', Energy and Buildings, Vuosikerta. 129, Sivut 199-206. https://doi.org/10.1016/j.enbuild.2016.08.015

Liimatainen, V, Sariola, V & Zhou, Q 2013, 'Controlling liquid spreading using microfabricated undercut edges', Advanced Materials, Vuosikerta. 25, Nro 16, Sivut 2275-2278. https://doi.org/10.1002/adma.201204696

Isotahdon, E, Huttunen-Saarivirta, E, Heinonen, S, Kuokkala, VT & Paju, M 2015, 'Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid', Journal of Alloys and Compounds, Vuosikerta. 626, Sivut 349-359. https://doi.org/10.1016/j.jallcom.2014.12.048

Kurnitski, J, Saari, A, Kalamees, T, Vuolle, M, Niemelä, J & Tark, T 2011, 'Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with REHVA definition for nZEB national implementation', Energy and Buildings, Vuosikerta. 43, Nro 11, Sivut 3279-3288. https://doi.org/10.1016/j.enbuild.2011.08.033

Linko, V, Leppiniemi, J, Paasonen, ST, Hytönen, VP & Jussi Toppari, J 2011, 'Defined-size DNA triple crossover construct for molecular electronics: Modification, positioning and conductance properties', Nanotechnology, Vuosikerta. 22, Nro 27, 275610. https://doi.org/10.1088/0957-4484/22/27/275610

Di Vito, D, Mosallaei, M, Vahed, BK, Kanerva, M & Mäntysalo, M 2020, Deformability analysis and improvement in stretchable electronics systems through finite element analysis. julkaisussa A Carcaterra, G Graziani & A Paolone (toim), Proceedings of XXIV AIMETA Conference 2019. Lecture Notes in Mechanical Engineering, Springer, Sivut 755-763, Rome, Italia, 15/09/19. https://doi.org/10.1007/978-3-030-41057-5_61

Antin, KN & Pärnänen, T 2017, 'Democratizing composites manufacturing -inexpensive tooling empowers new players', SAMPE Journal, Vuosikerta. 53, Nro 4, Sivut 6-10.

Välikangas, T, Hærvig, J, Kuuluvainen, H, Dal Maso, M, Peltonen, P & Vuorinen, V 2019, 'Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD', International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2019.119046

Cao, X, Aref, MM & Mattila, J 2019, Design and Control of a Flexible Joint as a Hydraulic Series Elastic Actuator for Manipulation Applications. julkaisussa Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019., 9095773, IEEE International Conference on Cybernetics and Intelligent Systems, IEEE, Sivut 553-558, 1/01/00. https://doi.org/10.1109/CIS-RAM47153.2019.9095773

Palazzo, G, De Tullio, D, Magliulo, M, Mallardi, A, Intranuovo, F, Mulla, MY, Favia, P, Vikholm-Lundin, I & Torsi, L 2015, 'Detection beyond Debye's length with an electrolyte-gated organic field-effect transistor', Advanced Materials, Vuosikerta. 27, Nro 5, Sivut 911-916. https://doi.org/10.1002/adma.201403541

Lehmusto, J, Olin, M, Viljanen, J, Kalliokoski, J, Mylläri, F, Toivonen, J, Dal Maso, M & Hupa, L 2019, 'Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF', Materials and Corrosion. https://doi.org/10.1002/maco.201910964

Hartikainen, J, Kolari, K & Kouhia, R 2016, Development and numerical implementation of an anisotropic continuum damage model for concrete. julkaisussa Advances in Fracture and Damage Mechanics XV. Key Engineering Materials, Vuosikerta. 713, Trans Tech Publications Ltd, Sivut 115-118, 1/01/00. https://doi.org/10.4028/www.scientific.net/KEM.713.115

Malas, A, Das, CK, Das, A & Heinrich, G 2012, 'Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties', Materials and Design, Vuosikerta. 39, Sivut 410-417. https://doi.org/10.1016/j.matdes.2012.03.007

Hokka, M, Mirow, N, Nagel, H, Vogt, S & Kuokkala, V-T 2016, DIC measurements of the human heart during cardiopulmonary bypass surgery. julkaisussa Conference Proceedings of the Society for Experimental Mechanics Series. Vuosikerta. 6, Springer New York LLC, Sivut 51-59, SOCIETY FOR EXPERIMENTAL MECHANICS ANNUAL CONFERENCE & EXPOSITION ON EXPERIMENTAL AND APPLIED MECHANICS, 1/01/00. https://doi.org/10.1007/978-3-319-21455-9_6

Ihalainen, TO, Aires, L, Herzog, FA, Schwartlander, R, Moeller, J & Vogel, V 2015, 'Differential basal-to-apical accessibility of lamin A/C epitopes in the nuclear lamina regulated by changes in cytoskeletal tension', Nature Materials, Vuosikerta. 14, Nro 12, Sivut 1252-1261. https://doi.org/10.1038/nmat4389

Huova, M, Aalto, A, Linjama, M, Huhtala, K, Lantela, T & Pietola, M 2017, 'Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results', International Journal of Fluid Power, Vuosikerta. 18, Nro 3, Sivut 141-152. https://doi.org/10.1080/14399776.2017.1302775

Soltani, A, Curtze, S, Lahti, J, Järvelä, K, Laurikka, J, Hokka, M & Kuokkala, VT 2018, Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery. julkaisussa Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vuosikerta. 4, Conference Proceedings of the Society for Experimental Mechanics, Springer New York LLC, Sivut 19-27, 1/01/00. https://doi.org/10.1007/978-3-319-63552-1_4

Wu, D, Coatanea, E & Wang, GG 2017, Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization. julkaisussa 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME, 1/01/00. https://doi.org/10.1115/DETC201767601

Rossi, M, Liegmann, E, Karamanakos, P, Castelli-Dezza, F & Kennel, R 2019, Direct model predictive power control of a series-connected modular rectifier. julkaisussa PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE, Sivut 1-6, Quanzhou, Kiina, 31/05/19. https://doi.org/10.1109/PRECEDE.2019.8753318

Houaoui, A, Lyyra, I, Agniel, R, Pauthe, E, Massera, J & Boissière, M 2019, 'Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass', Materials Science and Engineering C, Vuosikerta. 107, 110340. https://doi.org/10.1016/j.msec.2019.110340

Carfora, D, Di Gironimo, G, Järvenpää, J, Huhtala, K, Määttä, T & Siuko, M 2015, 'Divertor remote handling for DEMO: Concept design and preliminary FMECA studies', Fusion Engineering and Design, Vuosikerta. 98-99, Sivut 1437-1441. https://doi.org/10.1016/j.fusengdes.2015.06.056

Wang, X, Fagerlund, S, Massera, J, Södergård, B & Hupa, L 2017, 'Do properties of bioactive glasses exhibit mixed alkali behavior?', Journal of Materials Science, Vuosikerta. 52, Nro 15, Sivut 8986–8997. https://doi.org/10.1007/s10853-017-0915-y

Stoykova, E, Berberova, N, Kim, Y, Nazarova, D, Ivanov, B, Gotchev, A, Hong, J & Kang, H 2017, 'Dynamic speckle analysis with smoothed intensity-based activity maps', Optics and Lasers in Engineering, Vuosikerta. 93, Sivut 55-65. https://doi.org/10.1016/j.optlaseng.2017.01.012

Suokas, E 2017, Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating. julkaisussa 16th TAPPI European PLACE Conference 2017. TAPPI Press, Sivut 529-544, TAPPI EUROPEAN PLACE CONFERENCE, 1/01/00.

Sekki, T, Airaksinen, M & Saari, A 2017, 'Effect of energy measures on the values of energy efficiency indicators in Finnish daycare and school buildings', Energy and Buildings, Vuosikerta. 139, Sivut 124-132. https://doi.org/10.1016/j.enbuild.2017.01.005

Haiko, O, Miettunen, I, Porter, D, Ojala, N, Ratia, V, Heino, V & Kemppainen, A 2017, 'Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel', Tribologia, Vuosikerta. 35, Nro 1-2, Sivut 5-21.

Haiko, O, Heino, V, Porter, DA, Uusitalo, J & Kömi, J 2019, 'Effect of microstructure on the abrasive wear resistance of steels with hardness 450 HV', Tribologia, Vuosikerta. 36, Nro 1, Sivut 54-57. https://doi.org/10.30678/FJT.82443

Ratia, V, Rojacz, H, Terva, J, Valtonen, K, Badisch, E & Kuokkala, VT 2015, 'Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels', Tribology Letters, Vuosikerta. 57, Nro 2, 15. https://doi.org/10.1007/s11249-014-0460-7

Suokas, E 2019, Effect of polyolefin molecular structure on product properties in extrusion coating. julkaisussa 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, Sivut 89-98, Porto, Portugali, 20/05/19.

Vähä-Nissi, M, Hirvikorpi, T, Sievänen, J, Salo, E, Harlin, A, Johansson, P & Kuusipalo, J 2011, Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates. julkaisussa 13th European PLACE Conference 2011. Vuosikerta. 1, Sivut 447, Bregenz, Itävalta, 30/05/11.

Rasilo, P, Belahcen, A & Arkkio, A 2012, Effect of rotor pole-shoe construction on losses of inverter-fed synchronous motors. julkaisussa Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. Sivut 1282-1286, Marseille, Ranska, 2/09/12. https://doi.org/10.1109/ICElMach.2012.6350042

Hilliaho, K, Köliö, A, Pakkala, T, Lahdensivu, J & Vinha, J 2016, 'Effects of added glazing on Balcony indoor temperatures: Field measurements', Energy and Buildings, Vuosikerta. 128, Sivut 458-472. https://doi.org/10.1016/j.enbuild.2016.07.025

Vazquez Fernandez, N, Isakov, M, Hokka, M & Kuokkala, VT 2018, Effects of adiabatic heating estimated from tensile tests with continuous heating. julkaisussa Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vuosikerta. 1, Conference Proceedings of the Society for Experimental Mechanics, Springer New York LLC, Sivut 1-7, 1/01/00. https://doi.org/10.1007/978-3-319-62956-8_1

Hokka, M, Black, J, Tkalich, D, Fourmeau, M, Kane, A, Hoang, NH, Li, CC, Chen, WW & Kuokkala, V-T 2016, 'Effects of strain rate and confining pressure on the compressive behavior of Kuru granite', International Journal of Impact Engineering, Vuosikerta. 91, Sivut 183-193. https://doi.org/10.1016/j.ijimpeng.2016.01.010

Magliulo, M, Mallardi, A, Mulla, MY, Cotrone, S, Pistillo, BR, Favia, P, Vikholm-Lundin, I, Palazzo, G & Torsi, L 2013, 'Electrolyte-gated organic field-effect transistor sensors based on supported biotinylated phospholipid bilayer', Advanced Materials, Vuosikerta. 25, Nro 14, Sivut 2090-2094. https://doi.org/10.1002/adma.201203587

Thomas, K, Mohanty, G, Wehrs, J, Taylor, AA, Pathak, S, Casari, D, Schwiedrzik, J, Mara, N, Spolenak, R & Michler, J 2019, 'Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films', Journal of Materials Science, Vuosikerta. 54, Nro 15, Sivut 10884-10901. https://doi.org/10.1007/s10853-019-03422-x

Wu, D, Coatanea, E & Wang, GG 2019, 'Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization', Journal of Mechanical Design, Transactions of the ASME, Vuosikerta. 141, Nro 4, 041402. https://doi.org/10.1115/1.4042342

Ahonen, T, Hanski, J, Hyvärinen, M, Kortelainen, H, Uusitalo, T, Vainio, H, Kunttu, S & Koskinen, K 2019, Enablers and barriers of smart data-based asset management services in industrial business networks. julkaisussa Lecture Notes in Mechanical Engineering. Lecture Notes in Mechanical Engineering, Pleiades Publishing, Sivut 51-60, World Congress on Engineering Asset Management, 1/01/00. https://doi.org/10.1007/978-3-319-95711-1_6

Mäkinen, J, Fränti, K, Korhonen, M, Fillion, J & Heinisuo, M 2016, End-plate connections in Bi-axial bending - Measurements. julkaisussa FM Mazzolani, A Squillace, B Faggiano & F Bellucci (toim), 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016. Vuosikerta. 710, Key Engineering Materials, Vuosikerta. 710, Trans Tech Publications Ltd, Sivut 275-280, 7/12/16. https://doi.org/10.4028/www.scientific.net/KEM.710.275

Ottosen, NS, Ristinmaa, M & Kouhia, R 2018, 'Enhanced multiaxial fatigue criterion that considers stress gradient effects', International Journal of Fatigue, Vuosikerta. 116, Sivut 128-139. https://doi.org/10.1016/j.ijfatigue.2018.05.024

Sajna, MS, Perumbilavil, S, Prakashan, VP, Sanu, MS, Joseph, C, Biju, PR & Unnikrishnan, NV 2018, 'Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses', Materials Research Bulletin, Vuosikerta. 104, Sivut 227-235. https://doi.org/10.1016/j.materresbull.2018.04.026

Bourhis, K, Massera, J, Petit, L, Koponen, J, Fargues, A, Cardinal, T, Hupa, L, Hupa, M, Dussauze, M, Rodriguez, V & Ferraris, M 2015, 'Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties', Materials Research Bulletin, Vuosikerta. 70, Sivut 47-54. https://doi.org/10.1016/j.materresbull.2015.04.017

Vuorinen, E, Heino, V, Ojala, N, Haiko, O & Hedayati, A 2018, 'Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions', Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Vuosikerta. 232, Nro 1, Sivut 3-13. https://doi.org/10.1177/1350650117739125

Lappalainen, K, Wang, GC & Kleissl, J 2020, 'Estimation of the largest expected photovoltaic power ramp rates', Applied Energy, Vuosikerta. 278, 115636. https://doi.org/10.1016/j.apenergy.2020.115636

Claude, S, Ginestet, S, Bonhomme, M, Escadeillas, G, Taylor, J, Marincioni, V, Korolija, I & Altamirano, H 2019, 'Evaluating retrofit options in a historical city center: Relevance of bio-based insulation and the need to consider complex urban form in decision-making', Energy and Buildings, Vuosikerta. 182, Sivut 196-204. https://doi.org/10.1016/j.enbuild.2018.10.026

Mendes, MR, Subramaniyam, NP & Wendel-Mitoraj, K 2015, Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes. julkaisussa International IEEE/EMBS Conference on Neural Engineering, NER. Vuosikerta. 2015-July, IEEE COMPUTER SOCIETY PRESS, Sivut 1092-1095, International IEEE/EMBS Conference on Neural Engineering, 1/01/00. https://doi.org/10.1109/NER.2015.7146818

Medyna, G, Coatanea, E & Millet, D 2011, Evaluation of parts of a boat cabin based on exergy - Focusing on environmental and economic assessments. julkaisussa ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B toim, Vuosikerta. 4, AMER SOC MECHANICAL ENGINEERS, Sivut 1083-1092, ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 1/01/00.

Juoksukangas, J, Lehtovaara, A & Mäntylä, A 2016, 'Experimental and numerical investigation of fretting fatigue behavior in bolted joints', Tribology International, Vuosikerta. 103, Sivut 440-448. https://doi.org/10.1016/j.triboint.2016.07.021

Sippola, P, Kolehmainen, J, Ozel, A, Liu, X, Saarenrinne, P & Sundaresan, S 2018, 'Experimental and numerical study of wall layer development in a tribocharged fluidized bed', Journal of Fluid Mechanics, Vuosikerta. 849, Sivut 860-884. https://doi.org/10.1017/jfm.2018.412

Lindroos, M, Apostol, M, Kuokkala, VT, Laukkanen, A, Valtonen, K, Holmberg, K & Oja, O 2015, 'Experimental study on the behavior of wear resistant steels under high velocity single particle impacts', International Journal of Impact Engineering, Vuosikerta. 78, Sivut 114-127. https://doi.org/10.1016/j.ijimpeng.2014.12.002

Rasappa, S, Borah, D, Faulkner, CC, Lutz, T, Shaw, MT, Holmes, JD & Morris, MA 2013, 'Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography', Nanotechnology, Vuosikerta. 24, Nro 6, 065503. https://doi.org/10.1088/0957-4484/24/6/065503

Koivikko, A & Sariola, V 2019, Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds. julkaisussa 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). IEEE, Sivut 509-513, Seoul, Etelä-Korea, 14/04/19. https://doi.org/10.1109/ROBOSOFT.2019.8722741

Itävuo, P, Hulthén, E & Vilkko, M 2017, 'Feed-hopper level estimation and control in cone crushers', Minerals Engineering, Vuosikerta. 110, Sivut 82-95. https://doi.org/10.1016/j.mineng.2017.04.010

Mäntylä, A, Juoksukangas, J, Hintikka, J, Frondelius, T & Lehtovaara, A 2020, 'FEM-based wear simulation for fretting contacts', Rakenteiden Mekaniikka, Vuosikerta. 53, Nro 1, Sivut 20-27. https://doi.org/10.23998/rm.76261

Barreca, D, Carraro, G, Gasparotto, A, Maccato, C, Warwick, MEA, Kaunisto, K, Sada, C, Turner, S, Gönüllü, Y, Ruoko, T-P, Borgese, L, Bontempi, E, Van Tendeloo, G, Lemmetyinen, H & Mathur, S 2015, 'Fe2O3-TiO2 Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation', Advanced Materials Interfaces, Vuosikerta. 2, Nro 17. https://doi.org/10.1002/admi.201500313

Välikangas, T, Singh, S, Sørensen, K & Condra, T 2018, 'Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design', International Journal of Heat and Mass Transfer, Vuosikerta. 118, Sivut 602-616. https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.006

Szczodra, A, Mardoukhi, A, Hokka, M, Boetti, NG & Petit, L 2019, 'Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics', Journal of Alloys and Compounds, Vuosikerta. 797, Sivut 797-803. https://doi.org/10.1016/j.jallcom.2019.05.151

Far, MF, Mustafa, B, Martin, F, Rasilo, P & Belahcen, A 2018, Flux-Weakening Control for IPMSM Employing Model Order Reduction. julkaisussa 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE, Sivut 1510-1516, Alexandroupoli, Kreikka, 3/09/18. https://doi.org/10.1109/ICELMACH.2018.8506693

Mäenpää, P, Aref, MM & Mattila, J 2019, FORMI: A Fast Holonomic Path Planning and Obstacle Representation Method Based on Interval Analysis. julkaisussa Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE International Conference on Cybernetics and Intelligent Systems, IEEE, Sivut 398-403, Bangkok, Thaimaa, 18/11/19. https://doi.org/10.1109/CIS-RAM47153.2019.9095822

Ellman, A, Wendrich, R & Tiainen, T 2016, Framework and feasibility study for pairwise comparison tool. julkaisussa Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016., DETC2016-59886, ASME, Charlotte, North Carolina, 1/01/00. https://doi.org/10.1115/DETC2016-59886

Hintikka, J, Lehtovaara, A & Mäntylä, A 2015, 'Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel', Tribology International, Vuosikerta. 92, Sivut 191-202. https://doi.org/10.1016/j.triboint.2015.06.008

Priimägi, A & Hecht, S (toim) 2020, 'From Responsive Molecules to Interactive Materials', Advanced Materials, Vuosikerta. 32, Nro 20, 2000215. https://doi.org/10.1002/adma.202000215

Mohammed, WM, Ramis Ferrer, B, Iarovyi, S, Negri, E, Fumagalli, L, Lobov, A & Martinez Lastra, JL 2018, 'Generic platform for manufacturing execution system functions in knowledge-driven manufacturing systems', International Journal of Computer Integrated Manufacturing, Sivut 1-13. https://doi.org/10.1080/0951192X.2017.1407874

Holmberg, K, Kivikytö-Reponen, P, Härkisaari, P, Valtonen, K & Erdemir, A 2017, 'Global energy consumption due to friction and wear in the mining industry', Tribology International, Vuosikerta. 115, Sivut 116-139. https://doi.org/10.1016/j.triboint.2017.05.010

Coatanéa, E, Nonsiri, S, Christophe, F & Mokammel, F 2014, Graph based representation and analyses for conceptual stages. julkaisussa 34th Computers and Information in Engineering Conference. Vuosikerta. 1A, The American Society of Mechanical Engineers ASME, Buffalo, Yhdysvallat, 17/08/14. https://doi.org/10.1115/DETC201435652

Borah, D, Rasappa, S, Senthamaraikannan, R, Holmes, JD & Morris, MA 2014, 'Graphoepitaxial Directed Self-Assembly of Polystyrene-Block-Polydimethylsiloxane Block Copolymer on Substrates Functionalized with Hexamethyldisilazane to Fabricate Nanoscale Silicon Patterns', Advanced Materials Interfaces, Vuosikerta. 1, Nro 3, 1300102. https://doi.org/10.1002/admi.201300102

Mikkonen, A & Karvinen, R 2017, Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production. julkaisussa IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) ., Cracow, Puola, 23/05/16.

Lisjak, D, Lintunen, P, Hujanen, A, Varis, T, Bolelli, G, Lusvarghi, L, Jagodič, M & Drofenik, M 2011, 'Hexaferrite/polyethylene Composite coatings prepared with flame spraying', Materials Letters, Vuosikerta. 65, Nro 3, Sivut 534-536. https://doi.org/10.1016/j.matlet.2010.10.076

Subramaniam, K, Das, A & Heinrich, G 2012, 'Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide', KGK: KAUTSCHUK GUMMI KUNSTSTOFFE, Vuosikerta. 65, Nro 7-8, Sivut 44-46.

Philippi, PC, Siebert, DN, Hegele, LA & Mattila, KK 2016, 'High-order lattice-Boltzmann', Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vuosikerta. 38, Nro 5, Sivut 1401-1419. https://doi.org/10.1007/s40430-015-0441-2

Tzounis, L, Debnath, S, Rooj, S, Fischer, D, Mäder, E, Das, A, Stamm, M & Heinrich, G 2014, 'High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers', Materials and Design, Vuosikerta. 58, Sivut 1-11. https://doi.org/10.1016/j.matdes.2014.01.071

Hokka, M, Östman, K, Rämö, J & Kuokkala, VT 2015, High Temperature Tension HSB Device Based on Direct Electrical Heating. julkaisussa B Song, D Casem & J Kimberley (toim), Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Vuosikerta. 65, Conference Proceedings of the Society for Experimental Mechanics Series, Springer, Sivut 227-233, SOCIETY FOR EXPERIMENTAL MECHANICS ANNUAL CONFERENCE & EXPOSITION ON EXPERIMENTAL AND APPLIED MECHANICS, 1/01/00. https://doi.org/10.1007/978-3-319-06995-1_34

Kivioja, H & Vinha, J 2020, 'Hot-box measurements to investigate the internal convection of highly insulated loose-fill insulation roof structures', Energy and Buildings, Vuosikerta. 216, 109934. https://doi.org/10.1016/j.enbuild.2020.109934

Koivusalo, L, Karvinen, J, Sorsa, E, Jönkkäri, I, Väliaho, J, Kallio, P, Ilmarinen, T, Miettinen, S, Skottman, H & Kellomäki, M 2018, 'Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects', Materials Science and Engineering C, Vuosikerta. 85, Sivut 68-78. https://doi.org/10.1016/j.msec.2017.12.013

Shevkunov, I, Katkovnik, V, Claus, D, Pedrini, G, Petrov, NV & Egiazarian, K 2020, 'Hyperspectral phase imaging based on denoising in complex-valued eigensubspace', Optics and Lasers in Engineering, Vuosikerta. 127, 105973. https://doi.org/10.1016/j.optlaseng.2019.105973

Niemelä-Anttonen, H, Koivuluoto, H, Tuominen, M, Teisala, H, Juuti, P, Haapanen, J, Harra, J, Stenroos, C, Lahti, J, Kuusipalo, J, Mäkelä, JM & Vuoristo, P 2018, 'Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles', Advanced Materials Interfaces, Vuosikerta. 5, Nro 20. https://doi.org/10.1002/admi.201800828

Jowett, GM, Norman, MDA, Yu, TTL, Rosell Arévalo, P, Hoogland, D, Lust, ST, Read, E, Hamrud, E, Walters, NJ, Niazi, U, Chung, MWH, Marciano, D, Omer, OS, Zabinski, T, Danovi, D, Lord, GM, Hilborn, J, Evans, ND, Dreiss, CA, Bozec, L, Oommen, OP, Lorenz, CD, da Silva, RMP, Neves, JF & Gentleman, E 2020, 'ILC1 drive intestinal epithelial and matrix remodelling', Nature Materials. https://doi.org/10.1038/s41563-020-0783-8

Sekki, T, Airaksinen, M & Saari, A 2015, 'Impact of building usage and occupancy on energy consumption in Finnish daycare and school buildings', Energy and Buildings, Vuosikerta. 105, Sivut 247-257. https://doi.org/10.1016/j.enbuild.2015.07.036

Valtonen, K, Ratia, V, Ramakrishnan, KR, Apostol, M, Terva, J & Kuokkala, V-T 2019, 'Impact wear and mechanical behavior of steels at subzero temperatures', Tribology International, Vuosikerta. 129, Sivut 476-493. https://doi.org/10.1016/j.triboint.2018.08.016

Kouhia, R, Tůma, M, Mäkinen, J, Fedoroff, A & Marjamäki, H 2012, 'Implementation of a direct procedure for critical point computations using preconditioned iterative solvers', Computers & Structures, Vuosikerta. 108-109, Sivut 110-117. https://doi.org/10.1016/j.compstruc.2012.02.009

Haaparanta, A-M, Uppstu, P, Hannula, M, Ellä, V, Rosling, A & Kellomäki, M 2015, 'Improved dimensional stability with bioactive glass fibre skeleton in poly(lactide-co-glycolide) porous scaffolds for tissue engineering', Materials Science and Engineering C: Materials for Biological Applications, Vuosikerta. 56, 5584, Sivut 457-466. https://doi.org/10.1016/j.msec.2015.07.013

Lahtinen, K, Lahti, J, Johansson, P, Seppänen, T & Cameron, DC 2013, Improving the effect of a nanoscale barrier coating on BOPP film properties by surface pretreatments. julkaisussa 14th European PLACE Conference 2013. Vuosikerta. 1, TAPPI Press, Sivut 469-493, Dresden, Saksa, 6/05/13.

Lahti, J, Johansson, P, Lahtinen, K, Cameron, DC & Seppänen, T 2014, Improving the effect of nanoscale barrier coating on BOPP film properties: Influence of substrate contamination, web handling and pretreatments. julkaisussa TAPPI PLACE Conference 2014. Vuosikerta. 2, TAPPI Press, Sivut 1039-1061, TAPPI EUROPEAN PLACE CONFERENCE, 1/01/00.

Fedorik, F, Malaska, M, Hannila, R & Haapala, A 2015, 'Improving the thermal performance of concrete-sandwich envelopes in relation to the moisture behaviour of building structures in boreal conditions', Energy and Buildings, Vuosikerta. 107, Sivut 226-233. https://doi.org/10.1016/j.enbuild.2015.08.020

Janka, L, Norpoth, J, Eicher, S, Rodríguez Ripoll, M & Vuoristo, P 2016, 'Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment', Materials and Design, Vuosikerta. 98, Sivut 135-142. https://doi.org/10.1016/j.matdes.2016.03.007

Mäkinen, P, Mononen, T & Mattila, J 2018, Inertial Sensor-Based State Estimation of Flexible Links Subject to Bending and Torsion. julkaisussa 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018., 8449188, IEEE, Oulu, Suomi, 2/07/18. https://doi.org/10.1109/MESA.2018.8449188

Korkiakoski, S, Brøndsted, P, Sarlin, E & Saarela, O 2016, 'Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates', International Journal of Fatigue, Vuosikerta. 85, Sivut 114-129. https://doi.org/10.1016/j.ijfatigue.2015.12.008

Singh, AK, Ahonen, A, Ghabcheloo, R & Mueller, A 2020, Introducing Multi-Convexity in Path Constrained Trajectory Optimization for Mobile Manipulators. julkaisussa European Control Conference 2020, ECC 2020. IEEE, Sivut 1178-1185, Saint Petersburg, Venäjä, 12/05/20.

Oluoti, K, Doddapaneni, TRKC & Richards, T 2018, 'Investigating the kinetics and biofuel properties of Alstonia congensis and Ceiba pentandra via torrefaction', Energy, Vuosikerta. 150, Sivut 134-141. https://doi.org/10.1016/j.energy.2018.02.086

Gao, Q, Linjama, M, Paloniitty, M & Zhu, Y 2019, 'Investigation on positioning control strategy and switching optimization of an equal coded digital valve system', Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. https://doi.org/10.1177/0959651819884749

Holopainen, S 2020, 'Käyräviivaiset koordinaatistot kontinuumimekaniikassa', Rakenteiden Mekaniikka, Vuosikerta. 53, Nro 2, Sivut 53-66. https://doi.org/10.23998/rm.83338

Pekkanen, TT, Timonen, RS, Lendvay, G, Rissanen, MP & Eskola, AJ 2019, 'Kinetics and thermochemistry of the reaction of 3-methylpropargyl radical with molecular oxygen', PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vuosikerta. 37, Nro 1, Sivut 299-306. https://doi.org/10.1016/j.proci.2018.05.050

Cheng, YC, Lu, HC, Lee, X, Zeng, H & Priimagi, A 2019, 'Kirigami-Based Light-Induced Shape-Morphing and Locomotion', Advanced Materials. https://doi.org/10.1002/adma.201906233

Coatanéa, E, Wu, D, Tsarkov, V, Gary Wang, G, Modi, S & Jafarian, H 2018, Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs. julkaisussa 38th Computers and Information in Engineering Conference. Vuosikerta. 1B-2018, The American Society of Mechanical Engineers ASME, Quebec City, Kanada, 26/08/18. https://doi.org/10.1115/DETC201885895

Czaplicki, R, Kiviniemi, A, Huttunen, MJ, Zang, X, Stolt, T, Vartiainen, I, Butet, J, Kuittinen, M, Martin, OJF & Kauranen, M 2018, 'Less Is More: Enhancement of Second-Harmonic Generation from Metasurfaces by Reduced Nanoparticle Density', Nano Letters, Vuosikerta. 18, Nro 12, Sivut 7709-7714. https://doi.org/10.1021/acs.nanolett.8b03378

Zeng, H, Wasylczyk, P, Wiersma, DS & Priimagi, A 2018, 'Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials', Advanced Materials, Vuosikerta. 30, Nro 24, 1703554. https://doi.org/10.1002/adma.201703554

Hakkarainen, TV, Schramm, A, Mäkelä, J, Laukkanen, P & Guina, M 2015, 'Lithography-free oxide patterns as templates for self-catalyzed growth of highly uniform GaAs nanowires on Si(111)', Nanotechnology, Vuosikerta. 26, Nro 27, 275301. https://doi.org/10.1088/0957-4484/26/27/275301

Palagi, S, Mark, AG, Melde, K, Qiu, T, Zeng, H, Parmeggiani, C, Martella, D, Wiersma, DS & Fischer, P 2017, Locomotion of light-driven soft microrobots through a hydrogel via local melting. julkaisussa International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE, 1/01/00. https://doi.org/10.1109/MARSS.2017.8001916

Vitola, V, Lahti, V, Bite, I, Spustaka, A, Millers, D, Lastusaari, M, Petit, L & Smits, K 2020, 'Low temperature afterglow from SrAl2O4: Eu, Dy, B containing glass', Scripta Materialia, Vuosikerta. 190, Sivut 86-90. https://doi.org/10.1016/j.scriptamat.2020.08.023

Nommeots-Nomm, A, Boetti, NG, Salminen, T, Massera, J, Hokka, M & Petit, L 2018, 'Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics', Journal of Alloys and Compounds, Vuosikerta. 751, Sivut 224-230. https://doi.org/10.1016/j.jallcom.2018.04.101

Lahti, J 2019, Market implementation of active and intelligent packaging-opportunities from a socio-economic perspective. julkaisussa 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, Sivut 419-427, Porto, Portugali, 20/05/19.

Itävuo, P, Hulthén, E, Yahyaei, M & Vilkko, M 2019, 'Mass balance control of crushing circuits', Minerals Engineering, Vuosikerta. 135, Sivut 37-47. https://doi.org/10.1016/j.mineng.2019.02.033

Ronkainen, H, Kanerva, U, Varis, T, Ruusuvuori, K, Turunen, E, Peräntie, J, Putaala, J, Juuti, J & Jantunen, H 2013, Materials for electronics by thermal spraying. julkaisussa Physical and Numerical Simulation of Materials Processing VII. Vuosikerta. 762, Materials Science Forum, Vuosikerta. 762, Sivut 451-456, Oulu, Suomi, 16/06/13. https://doi.org/10.4028/www.scientific.net/MSF.762.451

Sekki, T, Airaksinen, M & Saari, A 2015, 'Measured energy consumption of educational buildings in a Finnish city', Energy and Buildings, Vuosikerta. 87, Sivut 105-115. https://doi.org/10.1016/j.enbuild.2014.11.032

Pylkkänen, K, Nurmikolu, A, Guthrie, WS & Argyle, HM 2015, Measurements and Modeling of Frost Depth in Railway Tracks. julkaisussa Proceedings of the International Conference on Cold Regions Engineering: 16th International Conference on Cold Regions Engineering 2015. American Society of Civil Engineers ASCE, Sivut 123-134, Iso-Britannia, 13/10/15. https://doi.org/10.1061/9780784479315.012

Coatanéa, E, Yannou, B, Honkala, S, Lajunen, A, Saarelainen, T & Makkonen, P 2008, Measurement theory and dimensional analysis: Methodological impact on the comparison and evaluation process. julkaisussa 19th International Conference on Design Theory and Methodology and 1st International Conference on Micro and Nano Systems, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007. AMER SOC MECHANICAL ENGINEERS, Sivut 173-182, Suomi, 4/09/07. https://doi.org/10.1115/DETC2007-34364

Sariola, V & Sitti, M 2014, 'Mechanically Switchable Elastomeric Microfibrillar Adhesive Surfaces for Transfer Printing', Advanced Materials Interfaces, Vuosikerta. 1, Nro 4, 1300159. https://doi.org/10.1002/admi.201300159

Liikanen, H, Aref, MM & Mattila, J 2019, M-Estimator Application in Real-Time Sensor Fusion for Smooth Position Feedback of Heavy-Duty Field Robots. julkaisussa Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Automation and Mechatronics (RAM). IEEE International Conference on Cybernetics and Intelligent Systems, IEEE, Sivut 368-373, 1/01/00. https://doi.org/10.1109/CIS-RAM47153.2019.9095821

Alatalo, M, Pitkänen, H, Ropo, M, Kokko, K & Vitos, L 2013, Modeling of steels and steel surfaces using quantum mechanical first principles methods. julkaisussa Physical and Numerical Simulation of Materials Processing VII. Vuosikerta. 762, Materials Science Forum, Vuosikerta. 762, Sivut 445-450, Oulu, Suomi, 16/06/13. https://doi.org/10.4028/www.scientific.net/MSF.762.445

Far, MF, Mukherjee, V, Martin, F, Rasilo, P & Belahcen, A 2018, Model Order Reduction of Bearingless Reluctance Motor Including Eccentricity. julkaisussa 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE, Sivut 2243-2249, Alexandroupoli, Kreikka, 3/09/18. https://doi.org/10.1109/ICELMACH.2018.8506758

Banichuk, N, Ivanova, S & Jeronen, J 2020, Moving Web and Dynamic Problem of Aerothermoelastic Vibrations and Instability. julkaisussa DA Indeitsev & AM Krivtsov (toim), Advanced Problems in Mechanics: Proceedings of the 47th International Summer School-Conference on Advanced Problems in Mechanics, APM 2019. Lecture Notes in Mechanical Engineering, Springer, Sivut 66-71, St. Petersburg, Venäjä, 24/06/19. https://doi.org/10.1007/978-3-030-49882-5_7

Carfora, D, Gironimo, GD, Esposito, G, Huhtala, K, Määttä, T, Mäkinen, H, Miccichè, G & Mozzillo, R 2016, 'Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach', Fusion Engineering and Design, Vuosikerta. 112, Sivut 324-331. https://doi.org/10.1016/j.fusengdes.2016.08.023

Reshef, O, Saad-Bin-Alam, M, Huttunen, MJ, Carlow, G, Sullivan, BT, Ménard, JM, Dolgaleva, K & Boyd, RW 2019, 'Multiresonant High-Q Plasmonic Metasurfaces', Nano Letters, Vuosikerta. 19, Nro 9, Sivut 6429-6434. https://doi.org/10.1021/acs.nanolett.9b02638

Lauri, M, Pajarinen, J, Peters, J & Frintrop, S 2020, 'Multi-sensor next-best-view planning as matroid-constrained submodular maximization', IEEE Robotics and Automation Letters, Vuosikerta. 5, Nro 4, Sivut 5323-5330. https://doi.org/10.1109/LRA.2020.3007445

Lahti, J 2019, Nanocellulose and Polylactic Acid Based Multilayer Coatings for Barrier Applications. julkaisussa 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, Sivut 446-455, Porto, Portugali, 20/05/19.

Teisala, H, Tuominen, M, Aromaa, M, Mäkelä, JM, Stepien, M, Saarinen, JJ, Toivakka, M & Kuusipalo, J 2011, Nanoparticle deposition on packaging materials by the liquid flame spray. julkaisussa 13th European PLACE Conference 2011. Vuosikerta. 1, TAPPI EUROPEAN PLACE CONFERENCE, 1/01/00.

Lahti, J 2016, Nanoscale barrier coating on BOPP packaging film by ALD. julkaisussa TAPPI PLACE Conference 2016: Exploring New Frontiers. TAPPI Press, Sivut 493-505, 1/01/00.

Debnath, SC, Das, A, Basu, D & Heinrich, G 2013, 'Naturally occurring amino acids: A suitable substitute of N-N/-di-phenyl guanidine (DPG) in silica tyre formulation?', KGK: KAUTSCHUK GUMMI KUNSTSTOFFE, Vuosikerta. 66, Nro 1-2, Sivut 25-31.

Cochrane, C, Mordon, SR, Lesage, JC & Koncar, V 2013, 'New design of textile light diffusers for photodynamic therapy', Materials Science and Engineering C: Materials for Biological Applications, Vuosikerta. 33, Nro 3, Sivut 1170-1175. https://doi.org/10.1016/j.msec.2012.12.007

Layek, RK, Uddin, ME, Kim, NH, Tak Lau, AK & Lee, JH 2017, 'Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic', Composites Part B : Engineering, Vuosikerta. 128, Sivut 155-163. https://doi.org/10.1016/j.compositesb.2017.07.010

Backas, J & Ghabcheloo, R 2019, 'Nonlinear model predictive energy management of hydrostatic drive transmissions', Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, Vuosikerta. 233, Nro 3, Sivut 335-347. https://doi.org/10.1177/0959651818793454

Hintikka, J, Lehtovaara, A & Mäntylä, A 2016, 'Normal displacements in non-Coulomb friction conditions during fretting', Tribology International, Vuosikerta. 94, Sivut 633-639. https://doi.org/10.1016/j.triboint.2015.10.029

Lahti, J, Kamppuri, T & Kuusipalo, J 2017, Novel bio-based materials for active and intelligent packaging. julkaisussa 16th TAPPI European PLACE Conference 2017. TAPPI Press, TAPPI EUROPEAN PLACE CONFERENCE, 1/01/00.

Lahti, J, Kuusipalo, J & Auvinen, S 2017, Novel equipment to simulate hot air heat sealability of packaging materials. julkaisussa 16th TAPPI European PLACE Conference 2017. TAPPI Press, Sivut 237-248, TAPPI EUROPEAN PLACE CONFERENCE, 1/01/00.

Kezilebieke, S, Žitko, R, Dvorak, M, Ojanen, T & Liljeroth, P 2019, 'Observation of Coexistence of Yu-Shiba-Rusinov States and Spin-Flip Excitations', Nano Letters, Vuosikerta. 19, Nro 7, Sivut 4614-4619. https://doi.org/10.1021/acs.nanolett.9b01583

Lindroos, M, Laukkanen, A, Cailletaud, G & Kuokkala, V-T 2017, 'On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains', International Journal of Solids and Structures, Vuosikerta. 125, Sivut 68-76. https://doi.org/10.1016/j.ijsolstr.2017.07.015

Tanskanen, JMA, Kapucu, FE & Hyttinen, JAK 2015, On the threshold based neuronal spike detection, and an objective criterion for setting the threshold. julkaisussa International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, Sivut 1016-1019, International IEEE/EMBS Conference on Neural Engineering, 1/01/00. https://doi.org/10.1109/NER.2015.7146799

Wendel, S, Karamanakos, P, Dietz, A & Kennel, R 2019, Operating point dependent variable switching point predictive current control for PMSM drives. julkaisussa PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE, Sivut 1-6, Quanzhou, Kiina, 31/05/19. https://doi.org/10.1109/PRECEDE.2019.8753362

Kravchenko, A, Shevchenko, A, Ovchinnikov, V, Priimagi, A & Kaivola, M 2011, 'Optical interference lithography using azobenzene-functionalized polymers for micro-and nanopatterning of silicon', Advanced Materials, Vuosikerta. 23, Nro 36, Sivut 4174-4177. https://doi.org/10.1002/adma.201101888

Tuurna, S, Varis, T, Penttilä, K, Ruusuvuori, K, Holmström, S & Yli-Olli, S 2011, 'Optimised selection of new protective coatings for biofuel boiler applications', Materials and Corrosion-Werkstoffe und Korrosion, Vuosikerta. 62, Nro 7, Sivut 642-649. https://doi.org/10.1002/maco.201005898

Taddeo, R, Prajapati, S & Lepistö, R 2017, 'Optimizing ammonium adsorption on natural zeolite for wastewaters with high loads of ammonium and solids', Journal of Porous Materials, Vuosikerta. 24, Nro 6, Sivut 1545–1554. https://doi.org/10.1007/s10934-017-0394-1

Roldán Del Cerro, P, Salminen, T, Lastusaari, M & Petit, L 2018, 'Persistent luminescent borosilicate glasses using direct particles doping method', Scripta Materialia, Vuosikerta. 151, Sivut 38-41. https://doi.org/10.1016/j.scriptamat.2018.03.034

Nommeots-Nomm, A, Houaoui, A, Pradeepan Packiyanathar, A, Chen, X, Hokka, M, Hill, R, Pauthe, E, Petit, L, Boissière, M & Massera, J 2020, 'Phosphate/oxyfluorophosphate glass crystallization and its impact on dissolution and cytotoxicity', Materials Science and Engineering C, Vuosikerta. 117, 111269. https://doi.org/10.1016/j.msec.2020.111269

Kreutzer, J, Viehrig, M, Maki, A-J, Kallio, P, Rahikainen, R & Hytönen, V 2017, Pneumatically actuated elastomeric device for simultaneous mechanobiological studies & live-cell fluorescent microscopy. julkaisussa International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE, 1/01/00. https://doi.org/10.1109/MARSS.2017.8001929

Kreutzer, J, Viehrig, M, Pölönen, RP, Zhao, F, Ojala, M, Aalto-Setälä, K & Kallio, P 2019, 'Pneumatic unidirectional cell stretching device for mechanobiological studies of cardiomyocytes', BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. https://doi.org/10.1007/s10237-019-01211-8

Motlagh, HDK, Lotfi, F, Taghirad, HD & Germi, SB 2019, Position Estimation for Drones based on Visual SLAM and IMU in GPS-denied Environment. julkaisussa ICRoM 2019 - 7th International Conference on Robotics and Mechatronics. IEEE, Sivut 120-124, Tehran, Iran, 20/11/19. https://doi.org/10.1109/ICRoM48714.2019.9071826

Pirjola, L, Kuuluvainen, H, Timonen, H, Saarikoski, S, Teinilä, K, Salo, L, Datta, A, Simonen, P, Karjalainen, P, Kulmala, K & Rönkkö, T 2019, 'Potential of renewable fuel to reduce diesel exhaust particle emissions', Applied Energy, Vuosikerta. 254, 113636. https://doi.org/10.1016/j.apenergy.2019.113636

Mäntylä, A, Hintikka, J, Frondelius, T, Vaara, J, Lehtovaara, A & Juoksukangas, J 2019, 'Prediction of contact condition and surface damage by simulating variable friction coefficient and wear', Tribology International. https://doi.org/10.1016/j.triboint.2019.106054

Pajarinen, J, Arenz, O, Peters, J & Neumann, G 2020, 'Probabilistic approach to physical object disentangling', IEEE Robotics and Automation Letters, Vuosikerta. 5, Nro 4, Sivut 5510-5517. https://doi.org/10.1109/LRA.2020.3006789

Teke, B, Lanz, M, Kämäräinen, J-K & Hietanen, A 2018, Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2. julkaisussa 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018., 8449156, IEEE, Oulu, Suomi, 2/07/18. https://doi.org/10.1109/MESA.2018.8449156

Subramaniyam, NP, Hyttinen, J, Hatsopoulos, NG & Takahashi, K 2015, Recurrence network analysis of wide band oscillations of local field potentials from the primary motor cortex reveals rich dynamics. julkaisussa International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, Sivut 960-963, International IEEE/EMBS Conference on Neural Engineering, 1/01/00. https://doi.org/10.1109/NER.2015.7146785

Ahmed, R, Priimagi, A, Faul, CFJ & Manners, I 2012, 'Redox-active, organometallic surface-relief gratings from azobenzene-containing polyferrocenylsilane block copolymers', Advanced Materials, Vuosikerta. 24, Nro 7, Sivut 926-931. https://doi.org/10.1002/adma.201103793

Kivelä, T, Mattila, J, Puura, J & Launis, S 2017, Redundant robotic manipulator path planning for real-time obstacle and self-collision avoidance. julkaisussa C Ferraresi & G Quaglia (toim), Advances in Service and Industrial Robotics: Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Mechanisms and Machine Science, Vuosikerta. 49, Springer International Publishing, Sivut 208-216, 1/01/00. https://doi.org/10.1007/978-3-319-61276-8_24

Alanen, J, Ruiz Morales, E, Muhammad, A, Saarinen, H & Minkkinen, J 2019, 'Remote diagnostics application software for remote handling equipment', Fusion Engineering and Design. https://doi.org/10.1016/j.fusengdes.2019.01.125

Gusrialdi, A, Xu, Y, Qu, Z & Simaan, MA 2020, Resilient Cooperative Voltage Control for Distribution Network with High Penetration Distributed Energy Resources. julkaisussa European Control Conference 2020, ECC 2020. IEEE, Sivut 1533-1539, Saint Petersburg, Venäjä, 12/05/20.

Mahmoodpour, M, Lobov, A, Lanz, M, Mäkelä, P & Rundas, N 2018, Role-based visualization of industrial IoT-based systems. julkaisussa 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018., 8449183, IEEE, Oulu, Suomi, 2/07/18. https://doi.org/10.1109/MESA.2018.8449183

Mäkelä, JM, Haapanen, J, Aromaa, M, Teisala, H, Tuominen, M, Stepien, M, Saarinen, JJ, Toivakka, M & Kuusipalo, J 2015, Roll-to-roll coating by liquid flame spray nanoparticle deposition. julkaisussa Materials Research Society Symposium Proceedings. Vuosikerta. 1747, MATERIALS RESEARCH SOCIETY, Sivut 37-42, MATERIALS RESEARCH SOCIETY SYMPOSIUM, 1/01/00. https://doi.org/10.1557/opl.2015.530

Linjamaa, A, Lehtovaara, A, Kallio, M & Léger, A 2019, 'Running-in effects on friction of journal bearings under slow sliding speeds', Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. https://doi.org/10.1177/1350650119864758

Hintikka, J, Mäntylä, A, Vaara, J, Frondelius, T, Juoksukangas, J & Lehtovaara, A 2019, 'Running-in in fretting, transition from near-stable friction regime to gross sliding', Tribology International, Vuosikerta. 143, 106073. https://doi.org/10.1016/j.triboint.2019.106073

Czaplicki, R, Mäkitalo, J, Siikanen, R, Husu, H, Lehtolahti, J, Kuittinen, M & Kauranen, M 2015, 'Second-Harmonic Generation from Metal Nanoparticles: Resonance Enhancement versus Particle Geometry', Nano Letters, Vuosikerta. 15, Nro 1, Sivut 530-534. https://doi.org/10.1021/nl503901e

Bautista, G, Mäkitalo, J, Chen, Y, Dhaka, V, Grasso, M, Karvonen, L, Jiang, H, Huttunen, MJ, Huhtio, T, Lipsanen, H & Kauranen, M 2015, 'Second-harmonic generation imaging of semiconductor nanowires with focused vector beams', Nano Letters, Vuosikerta. 15, Nro 3, Sivut 1564-1569. https://doi.org/10.1021/nl503984b

Chang, B, Sariola, V, Jääskeläinen, M & Zhou, Q 2011, 'Self-alignment in the stacking of microchips with mist-induced water droplets', Journal of Micromechanics and Microengineering, Vuosikerta. 21, Nro 1, 015016. https://doi.org/10.1088/0960-1317/21/1/015016

Chang, B, Routa, I, Sariola, V & Zhou, Q 2011, 'Self-alignment of RFID dies on four-pad patterns with water droplet for sparse self-assembly', Journal of Micromechanics and Microengineering, Vuosikerta. 21, Nro 9, 095024. https://doi.org/10.1088/0960-1317/21/9/095024

Christophe, F, Ritola, T, Coatanéa, E & Bernard, A 2011, Semantic analysis of function-solution duality. julkaisussa ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. Vuosikerta. 3, Sivut 611-619, ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 1/01/00. https://doi.org/10.1115/IMECE2011-63546

Gordon, TR, Paik, T, Klein, DR, Naik, GV, Caglayan, H, Boltasseva, A & Murray, CB 2013, 'Shape-dependent plasmonic response and directed self-assembly in a new semiconductor building block, indium-doped cadmium oxide (ICO)', Nano Letters, Vuosikerta. 13, Nro 6, Sivut 2857-2863. https://doi.org/10.1021/nl4012003

Ylönen, M, Franc, JP, Miettinen, J, Saarenrinne, P & Fivel, M 2019, 'Shedding frequency in cavitation erosion evolution tracking', International Journal of Multiphase Flow, Vuosikerta. 118, Sivut 141-149. https://doi.org/10.1016/j.ijmultiphaseflow.2019.06.009

Heininen, A, Aaltonen, J & Koskinen, KT 2017, Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle. julkaisussa J Aaltonen, R Virkkunen, KT Koskinen & R Kuivanen (toim), Proceedings of the 2nd Annual SMACC Research Seminar 2017. Vuosikerta. 2, 14, Tampere University of Technology, Tampere, Sivut 53-56, Tampere, 10/10/16.

Matikainen, V, Rubio Peregrina, S, Ojala, N, Koivuluoto, H, Schubert, J, Houdková, & Vuoristo, P 2019, 'Slurry and dry particle erosion wear properties of WC-10Co4Cr and Cr3C2-25NiCr hardmetal coatings deposited by HVOF and HVAF spray processes', Tribologia, Vuosikerta. 36, Nro 1-2, Sivut 58-61. https://doi.org/10.30678/FJT.83590

Le, T, Lin, Z, Wong, CP & Tentzeris, MM 2015, 'Smart Skins: Could they be the ultimate sensing tool? Today\uFFFDs industry and personal medical care both strongly demand accurate, reliable, robust, lo', IEEE Nanotechnology Magazine, Vuosikerta. 9, Nro 2, 7080864, Sivut 4-10. https://doi.org/10.1109/MNANO.2015.2410474

Netzev, M, Angleraud, A & Pieters, R 2020, 'Soft robotic gripper with compliant cell stacks for industrial part handling', IEEE Robotics and Automation Letters, Vuosikerta. 5, Nro 4, Sivut 6821-6828. https://doi.org/10.1109/LRA.2020.3020546

Mikkonen, A & Karvinen, R 2016, Solar Panel Breakage During Heavy Rain Caused by Thermal Stress. julkaisussa Engineered Transparency 2016: Glass in Architechture and Structural Engineering. Wiley, ENGINEERED TRANSPARENCY INTERNATIONAL CONFERENCE, 1/01/00.

Šutka, A, Käämbre, T, Joost, U, Kooser, K, Kook, M, Duarte, RF, Kisand, V, Maiorov, M, Döbelin, N & Smits, K 2018, 'Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals', Journal of Alloys and Compounds, Vuosikerta. 763, Sivut 164-172. https://doi.org/10.1016/j.jallcom.2018.05.036

Priimägi, A & Hecht, S (toim) 2020, 'Special Issue: From Responsive Materials to Interactive Materials', Advanced Materials, Vuosikerta. 32, Nro 20.

Lemougna, PN, Yliniemi, J, Ismailov, A, Levänen, E, Tanskanen, P, Kinnunen, P, Roning, J & Illikainen, M 2019, 'Spodumene tailings for porcelain and structural materials: Effect of temperature (1050–1200 °C) on the sintering and properties', Minerals Engineering. https://doi.org/10.1016/j.mineng.2019.105843

Luna, E, Wu, M, Hanke, M, Puustinen, J, Guina, M & Trampert, A 2016, 'Spontaneous formation of three-dimensionally ordered Bi-rich nanostructures within GaAs1-xBix/GaAs quantum wells', Nanotechnology, Vuosikerta. 27, Nro 32, 325603. https://doi.org/10.1088/0957-4484/27/32/325603

Hintikka, J, Mäntylä, A, Vaara, J, Frondelius, T & Lehtovaara, A 2019, 'Stable and unstable friction in fretting contacts', Tribology International, Vuosikerta. 131, Sivut 73-82. https://doi.org/10.1016/j.triboint.2018.10.014

Andersson, P, Kilpi, L, Holmberg, K, Vaajoki, A & Oksanen, V 2016, 'Static friction measurements on steel against uncoated and coated cast iron', Tribologia, Vuosikerta. 34, Nro 1-2, Sivut 5-40.

Laurila, MM, Khorramdel, B, Dastpak, A & Mäntysalo, M 2017, 'Statistical analysis of E-jet print parameter effects on Ag-nanoparticle ink droplet size', Journal of Micromechanics and Microengineering, Vuosikerta. 27, Nro 9, 095005. https://doi.org/10.1088/1361-6439/aa7a71

Lahtinen, K & Kuusipalo, J 2008, Statistical modeling of water vapor transmission rates for extrusion-coated papers. julkaisussa TAPPI 2008 PLACE Conference: Innovations in Flexible Consumer Packaging., Portsmouth, VA, Yhdysvallat, 14/09/08.

Koivuluoto, H, Milanti, A, Bolelli, G, Latokartano, J, Marra, F, Pulci, G, Vihinen, J, Lusvarghi, L & Vuoristo, P 2017, Structures and properties of laser-assisted cold-sprayed aluminum coatings. julkaisussa THERMEC 2016. Vuosikerta. 879, Materials Science Forum, Vuosikerta. 879, Trans Tech Publications Ltd, Sivut 984-989, 1/01/00. https://doi.org/10.4028/www.scientific.net/MSF.879.984

Teisala, H, Tuominen, M & Kuusipalo, J 2014, 'Superhydrophobic Coatings on Cellulose-Based Materials: Fabrication, Properties, and Applications', Advanced Materials Interfaces, Vuosikerta. 1, Nro 1, 1300026, Sivut 1-20. https://doi.org/10.1002/admi.201300026

Seidt, JD, Kuokkala, V-T, Smith, JL & Gilat, A 2017, 'Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates', Experimental Mechanics, Vuosikerta. 57, Nro 2, Sivut 219–229. https://doi.org/10.1007/s11340-016-0237-z

Chronopoulos, A, Thorpe, SD, Cortes, E, Lachowski, D, Rice, AJ, Mykuliak, VV, Rog, T, Lee, DA, Hytönen, VP & del Río Hernández, AE 2020, 'Syndecan-4 tunes cell mechanics by activating the kindlin-integrin-RhoA pathway', Nature Materials. https://doi.org/10.1038/s41563-019-0567-1

Sautter, JD, Xu, L, Miroshnichenko, AE, Lysevych, M, Volkovskaya, I, Smirnova, DA, Camacho-Morales, R, Zangeneh Kamali, K, Karouta, F, Vora, K, Tan, HH, Kauranen, M, Staude, I, Jagadish, C, Neshev, DN & Rahmani, M 2019, 'Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas', Nano Letters, Vuosikerta. 19, Nro 6, Sivut 3905-3911. https://doi.org/10.1021/acs.nanolett.9b01112

Kuusipalo, J & Lahti, J 2017, Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland. julkaisussa 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017. Vuosikerta. May-2017, TAPPI Press, TAPPI European PLACE Conference, 1/01/12.

Doddapaneni, TRKC, Praveenkumar, R, Tolvanen, H, Rintala, J & Konttinen, J 2018, 'Techno-economic evaluation of integrating torrefaction with anaerobic digestion', Applied Energy, Vuosikerta. 213, Sivut 272-284. https://doi.org/10.1016/j.apenergy.2018.01.045

Björling, M, Miettinen, J, Marklund, P, Lehtovaara, A & Larsson, R 2015, 'The correlation between gear contact friction and ball on disc friction measurements', Tribology International, Vuosikerta. 83, Sivut 114-119. https://doi.org/10.1016/j.triboint.2014.11.007

Lindroos, M, Apostol, M, Heino, V, Valtonen, K, Laukkanen, A, Holmberg, K & Kuokkala, VT 2015, 'The deformation, strain hardening, and wear behavior of chromium-alloyed hadfield steel in abrasive and impact conditions', Tribology Letters, Vuosikerta. 57, Nro 3, 24. https://doi.org/10.1007/s11249-015-0477-6

Järvinen, H, Isakov, M, Nyyssönen, T, Järvenpää, M & Peura, P 2016, 'The effect of initial microstructure on the final properties of press hardened 22MnB5 steels', Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, Vuosikerta. 676, Sivut 109-120. https://doi.org/10.1016/j.msea.2016.08.096

Lorimer, GW, Dicken, R, Peura, P, Pilkington, R, Younes, CM, Allen, GC & Holt, MJ 1996, 'The effect of phosphorous and arsenic on the fracture behaviour of a 2,25% Cr-1% Mo Steel', Materials Science Forum, Vuosikerta. 207-209, Nro PART 2, Sivut 645-648.

Lahti, J, Tuominen, M, Penttinen, T, Räsänen, JP & Kuusipalo, J 2009, The effects of corona and flame treatment: Part 2. PE-HD and PP coated papers. julkaisussa TAPPI Press - 12th European PLACE Conference 2009. Vuosikerta. 1, Sivut 278-314, Budapest, Unkari, 18/05/09.

Nurmi, V, Hintikka, J, Juoksukangas, J, Honkanen, M, Vippola, M, Lehtovaara, A, Mäntylä, A, Vaara, J & Frondelius, T 2019, 'The formation and characterization of fretting-induced degradation layers using quenched and tempered steel', Tribology International, Vuosikerta. 131, Sivut 258-267. https://doi.org/10.1016/j.triboint.2018.09.012

Liimatainen, H, van Vliet, O & Aplyn, D 2019, 'The potential of electric trucks – An international commodity-level analysis', Applied Energy, Vuosikerta. 236, Sivut 804-814. https://doi.org/10.1016/j.apenergy.2018.12.017

Mishra, A, Petit, L, Pihl, M, Andersson, M, Salminen, T, Rocherullé, J & Massera, J 2017, 'Thermal, structural and in vitro dissolution of antimicrobial copper-doped and slow resorbable iron-doped phosphate glasses', Journal of Materials Science, Vuosikerta. 52, Nro 15, Sivut 8957–8972. https://doi.org/10.1007/s10853-017-0805-3

Rodríguez Ripoll, M, Ojala, N, Katsich, C, Totolin, V, Tomastik, C & Hradil, K 2016, 'The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings', Materials and Design, Vuosikerta. 99, Sivut 509-520. https://doi.org/10.1016/j.matdes.2016.03.081

Hintikka, J, Lehtovaara, A & Mäntylä, A 2017, 'Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact', TRIBOLOGY TRANSACTIONS, Vuosikerta. 60, Nro 1, Sivut 70-78. https://doi.org/10.1080/10402004.2016.1146813

Jaurola, M, Hedin, A, Tikkanen, S & Huhtala, K 2018, 'TOpti: a flexible framework for optimising energy management for various ship machinery topologies', Journal of Marine Science and Technology (Japan). https://doi.org/10.1007/s00773-018-0617-4

Mokammel, F, Coatanea, E, Christophe, F, Ba Khouya, M & Medyna, G 2013, Towards an approach for evaluating the quality of requirements. julkaisussa 33rd Computers and Information in Engineering Conference. Vuosikerta. 2 B, V02BT02A024, American Society of Mechanical Engineers, Portland, OR, Yhdysvallat, 4/08/13. https://doi.org/10.1115/DETC2013-13708

Seppälä, J & Salmenperä, M 2015, Towards dependable automation. julkaisussa Cyber Security: Analytics, Technology and Automation: Part IV. Intelligent Systems, Control and Automation: Science and Engineering, Vuosikerta. 78, Springer International Publishing, Sivut 229-249. https://doi.org/10.1007/978-3-319-18302-2_15

Kuzmin, M, Laukkanen, P, Mäkelä, J, Yasir, M, Tuominen, M, Dahl, J, Punkkinen, MPJ, Kokko, K, Hedman, HP, Moon, J, Punkkinen, R, Lastusaari, M, Polojärvi, V, Korpijärvi, V-M & Guina, M 2016, 'Toward the Atomically Abrupt Interfaces of SiOx/Semiconductor Junctions', Advanced Materials Interfaces, Vuosikerta. 3, Nro 11, 1500510. https://doi.org/10.1002/admi.201500510

Wu, H, Sariola, V, Zhu, C, Zhao, J, Sitti, M & Bettinger, CJ 2015, 'Transfer printing of metallic microstructures on adhesion-promoting hydrogel substrates', Advanced Materials, Vuosikerta. 27, Nro 22, Sivut 3398-3404. https://doi.org/10.1002/adma.201500954

Ryynänen, T, Mzezewa, R, Meriläinen, E, Hyvärinen, T, Lekkala, J, Narkilahti, S & Kallio, P 2020, 'Transparent microelectrode arrays fabricated by ion beam assisted deposition for neuronal cell in vitro recordings', Micromachines, Vuosikerta. 11, Nro 5, 497. https://doi.org/10.3390/MI11050497

Huttunen-Saarivirta, E, Kilpi, L, Pasanen, AT, Salminen, T & Ronkainen, H 2020, 'Tribocorrosion behaviour of tin bronze CuSn12 under a sliding motion in NaCl containing environment: Contact to inert vs. reactive counterbody', Tribology International, Vuosikerta. 151, 106389. https://doi.org/10.1016/j.triboint.2020.106389

Mäntyranta, A, Heino, V, Isotahdon, E, Salminen, T & Huttunen-Saarivirta, E 2019, 'Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution', Tribology International, Vuosikerta. 138, Sivut 250-262. https://doi.org/10.1016/j.triboint.2019.05.032

Teisala, H, Geyer, F, Haapanen, J, Juuti, P, Mäkelä, JM, Vollmer, D & Butt, HJ 2018, 'Ultrafast Processing of Hierarchical Nanotexture for a Transparent Superamphiphobic Coating with Extremely Low Roll-Off Angle and High Impalement Pressure', Advanced Materials, Vuosikerta. 30, Nro 14, 1706529. https://doi.org/10.1002/adma.201706529

Barreca, D, Carraro, G, Gasparotto, A, Maccato, C, Altantzis, T, Sada, C, Kaunisto, K, Ruoko, T-P & Bals, S 2017, 'Vapor Phase Fabrication of Nanoheterostructures Based on ZnO for Photoelectrochemical Water Splitting', Advanced Materials Interfaces, Vuosikerta. 4, Nro 18, 1700161. https://doi.org/10.1002/admi.201700161

Linjama, M 2019, 'Variable speed digital hydraulic transformer–based servo drive', Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. https://doi.org/10.1177/0959651819869145

Linjama, M 2019, 'Variable speed drive with hydraulic boost', International Journal of Fluid Power, Vuosikerta. 20, Nro 1, Sivut 99-123. https://doi.org/10.13052/ijfp1439-9776.2014

Perttula, A, Nguyen, N, Collin, J & Jokinen, J-P 2019, 'Vehicle type detection and passenger satisfaction analysis using smartphone sensors and digital surveys', IET Intelligent Transport Systems, Vuosikerta. 13, Nro 10, Sivut 1499-1506. https://doi.org/10.1049/iet-its.2018.5349

Zhang, H, Zeng, H, Priimägi, A & Ikkala, O 2020, 'Viewpoint: Pavlovian Materials—Functional Biomimetics Inspired by Classical Conditioning', Advanced Materials. https://doi.org/10.1002/adma.201906619

Boardman, AD, Alberucci, A, Assanto, G, Grimalsky, VV, Kibler, B, McNiff, J, Nefedov, IS, Rapoport, YG & Valagiannopoulos, CA 2017, 'Waves in hyperbolic and double negative metamaterials including rogues and solitons', Nanotechnology, Vuosikerta. 28, Nro 44, 444001. https://doi.org/10.1088/1361-6528/aa6792

Bolelli, G, Milanti, A, Lusvarghi, L, Trombi, L, Koivuluoto, H & Vuoristo, P 2016, 'Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings', Tribology International, Vuosikerta. 95, Sivut 372-390. https://doi.org/10.1016/j.triboint.2015.11.036