Amr A, Saad M. Growth of Urban Peripheries with Reference to Inconsistent Spatial Planning Policies: South-east Amman as case study. European International Journal of Science and Technology. 2015 maalis;4(3):54-68. 3.

Piche RA. Mezhdunarodnaya konferencia po pozicionirovaniyu i navigacii vnutri pomeshhenij. Giroskopiya I Navigatsiya. 2015;88(1):122-124.

Ryczkowski P, Närhi M, Billet C, Merolla J-M, Genty G, Dudley JM. Real-time measurements of dissipative solitons in a mode-locked fiber laser. arXiv eprint. 2017 kesä 26.

Messo T, Roinila T, Aapro A, Luhtala R. Accurate impedance model of grid-connected inverter for small-signal stability assessment in high-impedance grid. IEEJ JOURNAL OF INDUSTRY APPLICATIONS. 2019 helmi 1;8(3). 3. https://doi.org/10.23919/IPEC.2018.8507573

Huhtelin M, Nenonen S. A Co-creation Centre for University–Industry Collaboration – A Framework for Concept Development. Procedia Economics and Finance. 2015;21:137 - 145. https://doi.org/10.1016/S2212-5671(15)00160-4

Stepanova E, Kudryavtsev I, Lohan E-S. Acquisition of E5 Galileo signals in Matlab. Procedia Engineering. 2015;104:36-42. https://doi.org/10.1016/j.proeng.2015.04.094

Chaudhary S, Zhao Y, Berki E, Valtanen J, Li L, Helenius M et al. A Cross-Cultural and Gender-Based Perspective for Online Security: Exploring Knowledge, Skills and Attitudes of Higher Education Students. IADIS International Journal on WWW/Internet. 2015;13(1):57-71.

Habib M, Hussain A, Rasheed S, Ali M. Adaptive fuzzy inference system based directional median filter for impulse noise removal. AEU International Journal of Electronics and Communication. 2016 touko 1;70(5):689-697. https://doi.org/10.1016/j.aeue.2016.02.005

Leivo V, Kiviste M, Aaltonen A, Turunen M, Haverinen-Shaughnessy U. Air pressure difference between indoor and outdoor or staircase in multi-family buildings with exhaust ventilation system in Finland. Energy Procedia. 2015;78C:1218-1223. 78C. https://doi.org/10.1016/j.egypro.2015.11.188

Rojas V, Martinez F, Bernede JC, Guenadez LC, Efimov A, Lemmetyinen H. Alkyl thiophene vinylene electropolymerization in C8mimPF6, potential use in solar cells. Materials Sciences and Applications. 2017 touko;8(5):405-417. https://doi.org/10.4236/msa.2017.85013

Sheikh MU, Lempiainen J. Analysis of outdoor and indoor propagation at 15 GHz and millimeter wave frequencies in microcellular environment. Advances in Science, Technology and Engineering Systems. 2018;3(1):160-167. https://doi.org/10.25046/aj030120

Passinmäki P. Architecture beyond signs and symbols : Zumthor's response to the problems of aesthetics. ARQ-Architectural Research Quarterly. 2016 touko 12;19(4):325-328. https://doi.org/10.1017/S1359135516000038

Gómez-Herrero G, Wu W, Rutanen K, Soriano MC, Pipa G, Vicente R. Assessing coupling dynamics from an ensemble of time series. Entropy. 2015;17(4):1958-1970. https://doi.org/10.3390/e17041958

Saari U, Aarikka-Stenroos L, Boedeker S, Köppä L, Langwaldt J. Assessing the usefulness of an early idea development tool among experienced researchers. CERN IdeaSquare Journal of Experimental Innovation. 2017 joulu 22;1(2):3-8. https://doi.org/10.23726/cij.2017.476

Kanerva M, Besharat Z, Pärnänen T, Jokinen J, Honkanen M, Sarlin E et al. Automatization and stress analysis data of CoCr laser weld fatigue tests. Data in Brief. 2019 loka 1;26. 104374. https://doi.org/10.1016/j.dib.2019.104374

Spruijt-Metz D, Hekler E, Saranummi N, Intille S, Korhonen I, Nilsen W et al. Building new computational models to support health behavior change and maintenance: new opportunities in behavioral research. Translational Behavioral Medicine. 2015 syys 17;5(3):335-346. https://doi.org/10.1007/s13142-015-0324-1

Yli-Hietanen J, Ylipää A, Yli-Harja O. Cancer research in the era of next-generation sequencing and big data calls for intelligent modeling. Chinese Journal of Cancer. 2015 huhti 11;34(10). 12. https://doi.org/10.1186/s40880-015-0008-8

Garifullin M, Bronzova MK, Heinisuo M, Mela K, Pajunen S. Cold-formed RHS T joints with initial geometrical imperfections. Magazine of Civil Engineering. 2018;80(4):81-94. https://doi.org/10.18720/MCE.80.8

Teymouri S, Calejo MT, Hiltunen M, Sorkio AE, Juuti-Uusitalo K, Skottman H et al. Collagen-immobilized polyimide membranes for retinal pigment epithelial cell adherence and proliferation. Cogent Chemistry. 2017 maalis 6;3(1). https://doi.org/10.1080/23312009.2017.1292593

Munir MW, Shahid N, Omair SM, Munir G, Ul Haque MZ. Comparative investigation of remote tracking devices for aging care. INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY. 2017 syys 1;9(3):261-266. https://doi.org/10.1007/s41870-017-0034-7

Alexandru R-C, Lohan E-S. Comparison of Detection Techniques for Multipath Propagation of Pseudolite Signals Used in Dense Industrial Environments. Procedia Engineering. 2015;100(C):1294-1300. https://doi.org/10.1016/j.proeng.2015.01.496

Keinänen M, Kähkönen K. Core Project Team As a Management Entity for Construction Projects. In_bo: Ricerche e progetti per il territorio, la citta e l'architettura. Construction Management. 2018;9(13):208-217.

Vainio T, Walsh T, Varsaluoma J. Cross-Cultural Design of Mobile Mathematics Learning Service for South African Schools. IADIS International Journal on WWW/Internet. 2015;12(1):81-93.

Róg T, Orłowski A, Llorente A, Skotland T, Sylvänne T, Kauhanen D et al. Data including GROMACS input files for atomistic molecular dynamics simulations of mixed, asymmetric bilayers including molecular topologies, equilibrated structures, and force field for lipids compatible with OPLS-AA parameters. Data in Brief. 2016 kesä 1;7:1171-1174. https://doi.org/10.1016/j.dib.2016.03.067

Bernard A, Coatanea E, Christophe F, Laroche F. Design: A Key Stage of Product Lifecycle. Procedia CIRP. 2014;21:3-9. https://doi.org/10.1016/j.procir.2014.06.146

Sasaki Y, Suzuki T, Iwagami T, Tani T, Naganuma H, Kino H et al. Development of chip-surface stimulus electrode array for fully-implantable subretinal prosthesis chip. Transactions of Japanese Society for Medical and Biological Engineering. 2014 elo 17;52:O-253-O-254. https://doi.org/10.11239/jsmbe.52.O-253

Tani T, Naganuma H, Harashima T, Iwagami T, Kino H, Kiyoyama K et al. Development of Si neural probe module with adjustable gain amplifier for neuronal signal recording. Transactions of Japanese Society for Medical and Biological Engineering. 2014 elo 17;52:O-377-O-378. https://doi.org/10.11239/jsmbe.52.O-377

Ellman A, Tiainen T. Diffusion of innovation: Case of co-design of cabins in mobile work machine industry. Computers. 2019 kesä 1;8(2). 39. https://doi.org/10.3390/computers8020039

Fei ZS, Gao Q, Fu Y, Isotalo T, Niemelä J. Distributed power allocation over indoor multi-pico stations. Journal of the Beijing Institute of Technology. 2015 kesä 1;24(2):227-232. https://doi.org/10.15918/j.jbit1004-0579.201524.0214

Allahham MHDS, Al-Sa'd MF, Al-Ali A, Mohamed A, Khattab T, Erbad A. DroneRF dataset: A dataset of drones for RF-based detection, classification and identification. Data in Brief. 2019 loka 1;26. 104313. https://doi.org/10.1016/j.dib.2019.104313

Tan LC, Nancharaiah YV, van Hullebusch ED, Lens PNL. Effect of elevated nitrate and sulfate concentrations on selenate removal by mesophilic anaerobic granular sludge bed reactors. Environmental Science: Water Research & Technology. 2018;4(2):303-314 . https://doi.org/10.1039/C7EW00307B

Singh A, Vihinen J, Frankberg E, Hyvärinen L, Honkanen M, Levänen E. Effect of Laser Power on Yield of TiO2 Nanoparticles Synthesized by Pulsed Laser Ablation in Water. Journal of Ceramic Science and Technology. 2017 maalis;8(1):39-43. https://doi.org/10.4416/JCST2016-00071

Baczkiewicz J, Pajunen S, Heinisuo M. Effect of radiation inside square hollow section under moderate non-symmetric fire. Fire Research. 2018 heinä 27;2(1):25-30. 2:42. https://doi.org/10.4081/fire.2018.42

Stupnikov A, Glazko GV, Emmert-Streib F. Effects of subsampling on characteristics of RNA‑seq data from triple‑negative breast cancer patients. Chinese Journal of Cancer. 2015 syys 8;34(10). https://doi.org/10.1186/s40880-015-0040-8

Assanto G, Perumbilavil S, Piccardi A, Kauranen M. Electro-optic steering of random laser emission in liquid crystals. Photonics Letters of Poland. 2018;10(4):103-105. https://doi.org/10.4302/plp.v10i4.852

Du L, Leivo V, Prasauskas T, Turunen M, Kiviste M, Martuzevicius D et al. Energy Retrofits in Multi-family Buildings in North-east Europe: The Impacts on Thermal Conditions. Energy Procedia. 2015 marras;78:860-864. https://doi.org/10.1016/j.egypro.2015.11.008

Sheikh MU, Hiltunen K, Lempiainen J. Enhanced outdoor to indoor propagation models and impact of different ray tracing approaches at higher frequencies. Advances in Science, Technology and Engineering Systems. 2018;3(2):58-68. https://doi.org/10.25046/aj030207

Chen Z, Dehmer M, Emmert-Streib F, Shi Y. Entropy of weighted graphs with Randić weights. Entropy. 2015;17(6):3710-3723. https://doi.org/10.3390/e17063710

Us D, Brzezinski K, Buitenhuis T, Dendooven P, Ruotsalainen U. Evaluation of Median Root Prior for Robust In-Beam PET Reconstruction. IEEE Transactions on Radiation and Plasma Medical Sciences. 2018 syys 5;2(5):490-498. https://doi.org/10.1109/TRPMS.2018.2854231

Li L, Ghazi A, Boutellier J, Anttila L, Valkama M, Bhattacharyya SS. Evolutionary multiobjective optimization for adaptive dataflow-based digital predistortion architectures. EAI Endorsed Transactions on Cognitive Communications. 2017 helmi 23;17(10). e3. https://doi.org/10.4108/eai.23-2-2017.152187

Ropo M, Schneider M, Baldauf C, Blum V. First-principles data set of 45,892 isolated and cation-coordinated conformers of 20 proteinogenic amino acids. Scientific Data. 2016 helmi 16;3. 160009. https://doi.org/10.1038/sdata.2016.9

Dongho-Nguimdo GM, Igumbor E, Zambou S, Joubert DP. First principles prediction of the solar cell efficiency of chalcopyrite materials  AgMX2(M=In, Al; X=S, Se, Te). Computational Condensed Matter. 2019 joulu 1;21. e00391. https://doi.org/10.1016/j.cocom.2019.e00391

Vilmi P, Nelo M, Voutilainen J-V, Palosaari J, Pörhönen J, Tuukkanen S et al. Fully printed memristors for a self-sustainable recorder of mechanical energy. Flexible and Printed Electronics. 2016 huhti 19;1(2). 025002. https://doi.org/10.1088/2058-8585/1/2/025002

Vihola J, Sorri J, Heljo J, Kero P. Heat Loss Rate of the Finnish Building Stock. Procedia Economics and Finance. 2015;21:601-608. https://doi.org/10.1016/S2212-5671(15)00218-X

Tukiainen A, Aho A, Polojärvi V, Ahorinta R, Guina M. High efficiency dilute nitride solar cells: Simulations meet experiments. Journal of Green Engineering. 2016;5(3-4):113-132. 8. https://doi.org/10.13052/jge1904-4720.5348

Reunanen T. Human Factor in Time Management. Procedia Manufacturing. 2015;3:709-716. https://doi.org/10.1016/j.promfg.2015.07.311

Sorokin M, Strokina N, Eerola T, Lensu L, Karttunen K, Kalviainen H. Image-based characterization of the pulp flows. Pattern Recognition and Image Analysis. 2016 heinä 1;26(3):630-637. https://doi.org/10.1134/S1054661816030196

Kurki V, Sidaraviciute R, Sörensen J, Kibocha SN, Retike I, Ikobe G et al. Importance and challenges of sharing experiences among an international and interdisciplinary group of doctoral students. Ympäristöhistoria: Finnish Journal of Environmental History. 2015;(1/2015):45-51.

Okun O, Kravchenko Y, Korpinen L. Influence of environmental conditions on EMF levels in a span of overhead transmission lines. Progress in Electromagnetics Research C. 2016;63:163-171. https://doi.org/10.2528/PIERC16021106

Silwal B, Rasilo P, Belahcen A, Arkkio A. Influence of the rotor eccentricity on the torque of a cage induction machine. Archives of Electrical Engineering. 2017 kesä;66(2):383-396. https://doi.org/10.1515/aee-2017-0029

Khorramdel B, Kraft TM, Mäntysalo M. Inkjet printed metallic micropillars for bare die flip-chip bonding. Flexible and Printed Electronics. 2017 loka 26;2(4):045005. https://doi.org/10.1088/2058-8585/aa9171

Palanivel S, Zhurina A, Doan P, Chandraseelan JG, Khandelwal VKM, Zubkov FI et al. In vitro characterization of arylhydrazones of active methylene derivatives. Saudi Pharmaceutical Journal. 2018;26(3):430-436. https://doi.org/10.1016/j.jsps.2017.12.018

Virtanen J, Kamppi A, Pekkarinen E, Määttä J-M, Järvinen J, Matilainen LJ et al. Kactus2: A graphical EDA tool built on the IP-XACT standard. The Journal of Open Source Software. 2017 touko 2;2(13):1. https://doi.org/10.21105/joss.00151

Kaarakka TE, Ali-Löytty S, Huhtanen M. Kehittämistutkimus: vuorovaikutteisten Matlab-opetusohjelmien vaikutus minäpystyvyyteen ja oppimistuloksiin yliopistomatematiikassa. FMSERA Journal . 2018;2(1):67-77.

Väyrynen H, Helander N, Kukko M. Knowledge Management Practices in Large Companies. The Macrotheme Review. 2014;3(9):56-72. 3(9).

Katko TS. Kohti tasapuolisempaa tutkimuksen arviointia: Pääkirjoitus. Ympäristöhistoria: Finnish Journal of Environmental History. 2015;5(1):4-5.

Heikkilä J, Martinsuo M. Lean-tuotanto ja sen johtaminen: onnistuminen, haasteet ja soveltuminen Suomen yrityksiin ja muihin organisaatioihin. Työpoliittinen aikakauskirja. 2015;(3):18-24.

Laudyn UA, Kwaśny M, Jung PS, Trippenbach M, Assanto G, Karpierz MA. Linear and nonlinear light beam propagation in chiral nematic liquid crystal waveguides. Photonics Letters of Poland. 2016;8(1):11-13. https://doi.org/10.4302/plp.2016.1.05

Bartsch H, Himmerlich M, Fischer M, Demko L, Hyttinen J, Schober A. LTCC-Based Multi-Electrode Arrays for 3D in Vitro Cell Cultures. Journal of Ceramic Science and Technology. 2015 joulu;6(4):315-324. https://doi.org/10.4416/JCST2015-00056

Khosravi M, Kähkönen K. Management and Planning Under Complexities of Metro Construction. Procedia Economics and Finance. 2015;21:415-421. https://doi.org/10.1016/S2212-5671(15)00194-X

Cenev Z, Zhang H, Sariola V, Rahikkala A, Liu D, Santos HA et al. Manipulating Superparamagnetic Microparticles with an Electromagnetic Needle. Advanced Materials Technologies. 2017;3(1). 1700177. https://doi.org/10.1002/admt.201700177

Pertuz S, Sassi A, Karivaara-Makela M, Holli-Helenius K, Laaperi A-L, Rinta-Kiikka I et al. Micro-parenchymal patterns for breast cancer risk assessment. Biomedical Physics & Engineering Express. 2019 loka;5(6). 065008. https://doi.org/10.1088/2057-1976/ab42f4

Latifi SK, Saketi P, Kallio P. Microrobotic system for multi-rate measurement of bio-based fibres Z-directional bond strength. Journal of Micro-Bio Robotics. 2015 touko 24;10(1):13-26. 1. https://doi.org/10.1007/s12213-015-0080-9

Pajunen S, Hautala J, Heinisuo M. Modelling the stressed skin effect by using shell elements with meta-material model. Magazine of Civil Engineering. 2019;86(2):20-29. https://doi.org/10.18720/MCE.86.3

Järvinen A, Kuuluvainen H, Niemi JV, Saari S, Dal Maso M, Pirjola L et al. Monitoring urban air quality with a diffusion charger based electrical particle sensor. Urban Climate. 2015;14(3). https://doi.org/10.1016/j.uclim.2014.10.002

Lehtoranta K, Murtonen T, Vesala H, Koponen P, Alanen J, Simonen P et al. Natural Gas Engine Emission Reduction by Catalysts. Emission Control Science and Technology. 2017 kesä;3(2):142-152. https://doi.org/10.1007/s40825-016-0057-8

Militano L, Orsino A, Araniti G, Iera A. NB-IoT for D2D-enhanced content uploading with social trustworthiness in 5G systems. Future Internet. 2017 heinä 8;9(3). 31. https://doi.org/10.3390/fi9030031

Vats S, Rissanen M. Parameters Affecting the Upcycling of Waste Cotton and PES/CO Textiles. Recycling. 2016 touko 30;1(1):166-177. https://doi.org/10.3390/recycling1010166

Kuuliala L, Pippuri T, Hultman J, Auvinen S-M, Kolppo K, Nieminen T et al. Preparation and antimicrobial characterization of silver-containing packaging materials for meat. Food Packaging and Shelf Life. 2015 joulu 1;6:53-60. 67. https://doi.org/10.1016/j.fpsl.2015.09.004

Veronese A, Racca M, Pieters R, Kyrki V. Probabilistic Mapping of Human Visual Attention from Head Pose Estimation. Frontiers in Robotics and AI. 2017 loka 30. 53. https://doi.org/10.3389/frobt.2017.00053

Viro IE, Joutsenlahti J. Projektityöskentelyn kehittäminen yläkoulun matematiikan opetuksessa. FMSERA Journal . 2018;2(1):90-99.

Karhu M, Lagerbom J, Kivikytö-Reponen P, Ismailov A, Levänen E. Reaction heat utilization in aluminosilicate-based ceramics synthesis and sintering. Journal of Ceramic Science and Technology. 2017 maalis 1;8(1):101-112. https://doi.org/10.4416/JCST2016-00094

Russell MG, Huhtamäki J, Still K, Rubens N, Basole RC. Relational Capital for Shared Vision in Innovation Ecosystems. Triple Helix: A Journal of University-Industry-Government Innovation and Entrepreneurship. 2015;2(1). https://doi.org/10.1186/s40604-015-0017-2

Hukka JJ, Katko TS. Resilient Asset Management and Governance Fordeteriorating Water Services Infrastructure. Procedia Economics and Finance. 2015;21:112-119. https://doi.org/10.1016/S2212-5671(15)00157-4

Bragadin MA, Kähkönen K. Safety, Space and Structure Quality Requirements in Construction Scheduling. Procedia Economics and Finance. 2015;21:407-414. https://doi.org/10.1016/S2212-5671(15)00193-8

Juuti P, Katko TS, Rajala R. Sata vuotta vesihuoltoa Suomessa. Vesitalous. 2017 joulu;58(6):13-15.

Marttila T, Annila P, Suonketo J, Kero P, Pentti M. Securing the flow of information in renovation projects: Sustainable synergies from buildings to the urban scale. PROCEDIA ENVIRONMENTAL SCIENCES. 2017;38:228-233. https://doi.org/10.1016/j.proenv.2017.03.109

Hackenberg J, Spiecker H, Calders K, Disney M, Raumonen P. SimpleTree: An Efficient Open Source Tool to Build Tree Models from TLS Clouds. Forests: Open Access Journal. 2015 marras 23;6(11):4245-4294. https://doi.org/10.3390/f6114245

Katko TS, Hukka JJ. Social and Economic Importance of Water Services in the Built Environment: Need for More Structured Thinking. Procedia Economics and Finance. 2015;21:217-223. https://doi.org/10.1016/S2212-5671(15)00170-7

Savolainen J, Kähkönen K, Niemi O, Poutanen J, Varis E. Stirring the Construction Project Management with Co-creation and Continuous Improvement. Procedia Economics and Finance. 2015;21:64-71. https://doi.org/10.1016/S2212-5671(15)00151-3

Katko TS. Suomen vesihuollon kehitys ja opit kansainvälisessä kontekstissa. Vesitalous. 2017;58(1):8-11.

Garifullin MR, Barabash AV, Naumova EA, Zhuvak OV, Jokinen T, Heinisuo M. Surrogate modeling for initial rotational stiffness of welded tubular joints. Magazine of Civil Engineering. 2016;63(3):53-76. https://doi.org/10.5862/MCE.63.4

Coatanéa E, Ryynänen L, Calonius O, Mokammel F, Riitahuhta A. Systematic Search and Ranking of Physical Contradictions Using Graph Theory Principles: Toward a Systematic Analysis of Design Strategies and their Impacts: TRIZ and Knowledge-Based Innovation in Science and Industry. Procedia Engineering. 2015;131:1165-1182. https://doi.org/10.1016/j.proeng.2015.12.441

Hosseini SSS, Jamali MM, Astola J, Gorsevski PV. Target tracking via combination of particle filter and optimisation techniques. International Journal of Mathematical Modelling and Numerical Optimization. 2016;7(2):212-229. https://doi.org/10.1504/IJMMNO.2016.077068

Wu L, Looi CK, Multisilta J, How ML, Choi H, Hsu TC et al. Teacher’s Perceptions and Readiness to Teach Coding Skills: A Comparative Study Between Finland, Mainland China, Singapore, Taiwan, and South Korea. Asia-Pacific Education Researcher. 2019 syys 30. https://doi.org/10.1007/s40299-019-00485-x

Helander N, Myllylä M. Teoriaa ja kokemuksia arvioinnista MOOCien aikakaudella. TAMPEREEN AMMATTIKORKEAKOULUN JULKAISUJA. SARJA B, RAPORTTEJA. 2016 heinä 11;70-77.

Koivisto AJ, Jensen ACØ, Levin M, Kling KI, Maso MD, Nielsen SH et al. Testing the near field/far field model performance for prediction of particulate matter emissions in a paint factory. Environmental Sciences: Processes and Impacts. 2015 tammi 1;17(1):62-73. https://doi.org/10.1039/c4em00532e

Hlavatý I, Kozák J, Krejci L, Samardzic I, Tuominen J. The effect of tungsten carbide particles content in a weld deposit on its abrasion resistance. Technical Gazette - Technicki vjesnik. 2017 loka;24(5):1345-1349. https://doi.org/10.17559/TV-20160503085356

Acimovic J, Mäki-Marttunen T, Linne M-L. The effects of neuron morphology on graph theoretic measures of network connectivity: The analysis of a two-level statistical model. Frontiers in Neuroanatomy. 2015 kesä 10;9(June). 76. https://doi.org/10.3389/fnana.2015.00076

Huovinen P. Theoretical 71-Concept Platform for Advancing Construction-related Business Management. Procedia Economics and Finance. 2015;21:80-87. https://doi.org/10.1016/S2212-5671(15)00153-7

Laudyn UA, Kwaśny M, Karpierz MA, Assanto G. Three-color vector nematicon. Photonics Letters of Poland. 2017;9(2):36-38. https://doi.org/10.4302/plp.v9i2.718

Karjalainen P, Timonen H, Saukko E, Kuuluvainen H, Saarikoski S, Aakko-Saksa P et al. Time-resolved characterization of primary and secondary particle emissions of a modern gasoline passenger car. Atmospheric Chemistry and Physics Discussions. 2015 marras 25;15(22):33253-33282. https://doi.org/10.5194/acpd-15-33253-2015

Taibi D, Lenarduzzi V, Dieudonne L, Plociennik C. Towards a Classification Schema for Development Technologies: an Empirical Study in the Avionic Domain. INTERNATIONAL JOURNAL ON ADVANCES IN SOFTWARE. 2015 elo 1;8(1&2):125-135.

Kekonen A, Bergelin M, Viik J. Tutkimuskatsaus: Uusia menetelmiä haavan paranemisen arviointiin ja seurantaan. HAAVA. 2018 loka 20;20(3):30-32.

Myllykoski TJ, Mattila P, Ali-Löytty S, Kaarakka T, Viro E. Yliopistomatematiikan sähköisten tehtävien ja matemaattisen ajattelun kehittäminen. FMSERA Journal . 2018;2(1):46-56.

Shao K, Zhou B, Wang G, Yu B. 基于相位旋转的SCMA码本优化方法. Xi Tong Gong Cheng Yu Dian Zi Ji Shu/Systems Engineering and Electronics. 2018;40(10):2354-2362. https://doi.org/10.3969/j.issn.1001-506X.2018.10.29

Matikainen V, Koivuluoto H, Milanti A, Vuoristo P. Advanced coatings by novel high-kinetic thermal spray processes. Materia. 2015 helmi 9;73(1):46-50.

Peura P, Vuoristo P, Vihinen J. Education and Materials Joining Research methods at Tampere University of Technology. Hitsaustekniikka. 2015 kesä;65(2-3/2015):73-76.

Valtonen K, Tiainen T. Hard Rock (- ei Hallelujah, vaan) Tribology: Pohjoismainen kaivosteollisuuden kulumisongelmiin keskittyvä kurssi ja seminaari Tampereella. Materia. 2015 syys 2;2015(1):30-33.

Koponen O-P. Kangasala-talo: Vanhan kulttuuripitäjän uusi kulttuuritalo. Arkkitehti. 2015;2015(4/2015):67-69.

Järveläinen M, Yli-Hallila T, Salpavaara T, Verho J, Vilkko M, Levänen E. Kolloidisten suspensioiden online -analysointi: tutkimuksesta liiketoimintaa. Materia. 2015 loka;(5/2015):54-57.

Chudoba M. Koteja ja kokonaistaideteoksia. Arkkitehti. 2015;(3):76-78.

Hilliaho K, Hietaniemi J, Visa P. Lasitettujen parvekkeiden ja terassien käyttäytyminen tulipaloissa. Palontorjuntatekniikka. 2015 elo 24;(Erikoisnumero):18-23.

Karjalainen P. Muuttuvat ajotilanteet aiheuttavat uudentyyppisiä ajoneuvojen hiukkaspäästöjä. Ympäristö ja terveys. 2015 loka 12;46(6):28-31.

Koponen O-P. Postmodernismi Suomen rakennusperinnössä. Arkkitehti. 2015;2015(2/2015):72-74.

Viro E, Eriksson S-L. Projektioppiminen yläkoulun matematiikassa. Lumat. 2015;3(7):1005-1009.

Ojala P, Saarenrinne P, Miettinen J, Multanen P, Kiilunen J, Hietala J-P et al. Simulointi nopeuttaa käyttöiän määritystä. Promaint. 2015;2:24-27.

Frankberg EJ. Suomen keraaminen seura - Keramiska sällskapet i Finland. Materia. 2015 loka;5:58-58.

Katko TS, Lukka A, Rajala R. Tampereelta valmistuneiden vesihuoltoalan diplomi-insinöörien sijoittuminen ja odotukset yliopisto-opetukselle. Vesitalous. 2015;(2):45-47.

Eriksson S-L, Haukkanen P, Hukka TI, Lemmetyinen H. Tampereen matemaattisten aineiden aineenopettajakoulutus. Lumat. 2015 maalis 11;3( 6):800-807.

Passinmäki P. Taskinen yksissä kansissa. Arkkitehti. 2015;(2):89-90.

Tewfik M, Amr A. Arbitrary Land Use Policy in Jordan between Legal Brand and Property Control. European International Journal of Science and Technology. 2014 joulu;3(9):86-93.

El-Khozondar H, El-Khozondar R, Matter K, Suntio T. A review study of photovoltoltaic array maximum power point tracking algorithms. Renewables: Wind, Water, and Solar. 2016 helmi 18;3(1). https://doi.org/10.1186/s40807-016-0022-8

Hynynen A. Future in wood? Timber construction in boosting local development. European Spatial Research and Policy. 2016;23(1):127-139. https://doi.org/10.1515/esrp-2016-0007

Sörensen J, Kurki V, Sidaraviciute R, Ngari Kibocha S, Retike I, Ikobe G et al. Interdisciplinary water research network building within Nordic and Baltic countries. Vatten. 2015;(71):79-83.

Juuti PS, Kurki V, Rajala R. Local narratives in the long term water conflicts: Case of Turku Region in Finland. Ympäristöhistoria: Finnish Journal of Environmental History. 2017 touko;2017(1):39-49.

Kraft T, Berger P, Lupo D. Printed and organic diodes: devices, circuits and applications. Flexible and Printed Electronics. 2017 syys 29;2(3). 033001. https://doi.org/10.1088/2058-8585/aa8ac3

Juuti P, Rajala R. Sata vuotta Suomen suurimmasta lavantautiepidemiasta. Vesitalous. 2017;2017(1):12-14.

Juuti P, Rajala R. Valkea kaupunki, mustat vedet. Vesitalous. 2017;2017(1):15-17.

Juuti P. Vesi, ongelma ennen ja nyt? Ympäristöhistoria: Finnish Journal of Environmental History. 2017 touko;2017(1):54-65.

Müller P, Raitoharju M, Ali-Löytty S, Wirola L, Piche R. Обзор параметрических методов позиционирования на основе концепции отпечатка пальца. Giroskopiya I Navigatsiya. 2016;24(1):3-35. https://doi.org/10.17285/0869-7035.2016.24.1.003-035

Garifullin M. Experimental moment resistance of rectangular hollow section T joints. MATEC Web of Conferences. 2018 joulu 5;245. 08003. https://doi.org/10.1051/matecconf/201824508003

Karimi N, Alberucci A, Virkki M, Priimägi A, Kauranen M, Assanto G. Quenching nematicon fluctuations via photo-stabilization. Photonics Letters of Poland. 2016 maalis 31;8(1):2-4. https://doi.org/10.4302/plp.2016.1.02

Helamaa A. Kattavasti rivitaloista. Arkkitehti. 2015;(3):80-81.

Kähkönen K, Huovinen P, Keinänen M. Editorial. Procedia Economics and Finance. 2015;21:1-5.

Christiansen J, Birkinshaw J, Le Massaon P, Mäkinen S. Editorial: Experiments in an Organisational Context. CERN IdeaSquare Journal of Experimental Innovation. 2017;1(2). https://doi.org/10.23726/cij.2017.684

Juuti PS. Editorial: Information to support decision-making. Ympäristöhistoria: Finnish Journal of Environmental History. 2017 touko;2017(1):5-6.

Tartia J. Arkinen liikkuminen kontekstina kaupunkitilan tarkasteluun. Versus. 2015.

Kähkönen K, (ed.). 8th Nordic Conference on Construction Economics and Organization. Procedia Economics and Finance. 2015;21.

Toivari E, Manninen T, Nahata AK, Jalonen TO, Linne M-L. Calcium signaling in astrocytes: modeling Fura-2AM measurements. Frontiers in Neuroscience. 2010. https://doi.org/10.3389/conf.fnins.2010.13.00061

Varheenmaa M. A new generation sweating thermal manikin for the evaluation of the thermal comfort of protective clothing in Arctic Conditions. julkaisussa Konola S, Kähkönen P, toimittajat, Arctic Wears - Perspectives on Arctic Clothing. Lapland University of Applied Sciences. 2015. s. 154-161. (Liiketoiminta ja yrittäjyys Sarja B. Raportit ja selvitykset 10/2015).

Koponen O-P. Meeting of Vernacular and Modern Architecture in Urbino: Giancarlo De Carlo and reading of the context. julkaisussa Mattila M, toimittaja, Italian Vernadoc 2015 – Amandola: Studying Italia and its architecture. The first 10 VERNADOC-years. Helsinki: Suomen ICOMOS, kansanrakentamisen komitea. 2015. s. 26-29

Salonen J, Laukkarinen A, Vinha J. Ulkoseinien rakennusfysikaaliset riskit ja pitkäaikaiskestävät ratkaisut. julkaisussa Soikkeli A, Koiso-Kanttila J, Sorri L, toimittajat, Korjaa ja korota: Kerrostalojen korjaamisen ja lisäkerrosten rakentamisen ratkaisuja. Vuosikerta 62. Oulu, Finland: Oulun yliopisto. 2015. s. 74-81. (Oulun yliopisto, arkkitehtuurin osasto. A. Julkaisu).

Nisula J, Saari A. Aluetehokkuuden kustannusvaikutukset. julkaisussa Nollaa parempi – Townhouse energiatehokkaassa asuinrakentamisessa. Aalto-yliopisto. 2015. s. 102-107. (Aalto University publication series Crossover; 9/2015).

Ferrer BR. A Proposal of Decentralized Architecture for OKD-MES. julkaisussa Strzelczak S, Balda P, Garetti M, Lobov A, toimittajat, Open Knowledge-Driven Manufacturing & Logistics: The eScop Approach. Warsaw: Warsaw University of Technology Publishing House. 2015. s. 331-340

Ramis Ferrer B. Classification of Knowledge Representation Implementations in the Manufacturing Systems Domain. julkaisussa Strzelczak S, Balda P, Garetti M, Lobov A, toimittajat, Open Knowledge-Driven Manufacturing & Logistics: The eScop Approach. Warsaw University of Technology Publishing House. 2015. s. 235-244

Bernhardt J, Helander N, Jussila J, Kärkkäinen H. Crowdsourcing in Business-to-Business Markets: A Value Creation and Business Model Perspective. julkaisussa Encyclopedia of E-Commerce Development, Implementation, and Management. United States: IGI Global. 2016. s. 933-943. 66 https://doi.org/10.4018/978-1-4666-9787-4.ch066

Munnukka J, Karjaluoto H, Mahlamäki T, Hokkanen V. Effects of Social Media on Consumers' Sports Brand Experiences and Loyalty. julkaisussa Stieler M, toimittaja, Creating Marketing Magic and Innovative Future Marketing Trends: Proceedings of the 2016 Academy of Marketing Science (AMS) Annual Conference. Springer International Publishing. 2017. s. 1051-1064. ( Developments in Marketing Science: Proceedings of the Academy of Marketing Science). https://doi.org/10.1007/978-3-319-45596-9_194

Suominen O, Mörsky V, Ritala R, Vilkko M. Framework for optimization and scheduling of a copper production plant. julkaisussa 26th European Symposium on Computer Aided Process Engineering, 2016. Vuosikerta 38. Elsevier Science B.V. 2016. s. 1243-1248. (Computer Aided Chemical Engineering). https://doi.org/10.1016/B978-0-444-63428-3.50212-5

Porkka PL. Functional model for organisational and safety culture. julkaisussa Chemical Engineering Transactions. Italian Association of Chemical Engineering AIDIC. 2016. s. 907-912. (Chemical Engineering Transactions). https://doi.org/10.3303/CET1648152

Nommeots-Nomm A, Massera J. Glass and Glass-Ceramic Scaffolds: Manufacturing Methods and the Impact of Crystallization on In-Vitro Dissolution. julkaisussa Scaffolds in Tissue Engineering - Materials, Technologies and Clinical Applications. InTech Open Access Publisher. 2017 https://doi.org/10.5772/intechopen.70242

Santinha J, Gupta A, Martins L, Annila T, Häkkinen A, Mora A et al. icellfusion: Tool for fusion and analysis of live-cell images from time-lapse multimodal microscopy. julkaisussa Biometrics: Concepts, Methodologies, Tools, and Applications. IGI Global. 2016. s. 806-834 https://doi.org/10.4018/978-1-5225-0983-7.ch033

Mokammel F, Coatanea E, Bakhouya M, Christophe F, Nonsiri S. Impact analysis of graph-based requirements models using PageRank algorithm. julkaisussa 2013 IEEE International Systems Conference (SysCon). IEEE. 2013. s. 731-736. (2013 IEEE International Systems Conference (SysCon)). https://doi.org/10.1109/SysCon.2013.6549964

Lilja K. Jossakin vuoti öljy, muualla tihkuivat tiedot - etiikka katoavien rajojen ja suurten skandaalien aikakaudella. julkaisussa Silmät auki It-etiikkaan. EDUSKUNNAN TULEVAISUUSVALIOKUNTA. 2015. s. 85-101. (Eduskunnan tulevaisuusvaliokunnan julkaisu; 12).

Vainio T, Walsh T. Learning maths with mobiles: Cross-cultural design of technology with experiences in South-Africa and Finland. julkaisussa Integrating Touch-Enabled and Mobile Devices into Contemporary Mathematics Education. IGI Global. 2015. s. 79-96 https://doi.org/10.4018/978-1-4666-8714-1.ch004

Vainio T, Walsh T. Learning Maths with mobiles: Cross-cultural design of technology with experiences in South-Africa and Finland. julkaisussa Blended Learning: Concepts, Methodologies, Tools, and Applications. Vuosikerta 4. IGI Global. 2016. s. 741-759 https://doi.org/10.4018/978-1-5225-0783-3.ch037

Tuukkanen S, Rajala S. Nanocellulose as a Piezoelectric Material. julkaisussa Piezoelectricity - Organic and Inorganic Materials and Applications. InTech Open Access Publisher. 2018. s. 1-14 https://doi.org/10.5772/intechopen.77025

Harmanen J, Mikkonen T. On Polyglot Programming in the Web. julkaisussa Modern Software Engineering Methodologies for Mobile and Cloud Environments. IGI Global. 2016. s. 102-119 https://doi.org/10.4018/978-1-4666-9916-8.ch006

Lobov A. On service composition - dynamic formation and orchestration of service workflows. julkaisussa Strzelczak S, Balda P, Garetti M, Lobov A, toimittajat, Open Knowledge-Driven Manufacturing and Logistics - The eScop Approach. Warsaw University of Technology Publishing House. 2015. s. 311-319

Morasca S, Taibi D, Tosi D. OSS-TMM: Guidelines for improving the testing process of open source software. julkaisussa Open Source Software Dynamics, Processes, and Applications. IGI Global. 2013. s. 59-78 https://doi.org/10.4018/978-1-4666-2937-0.ch004

Pohjola J, Turunen J, Lipping T, Ikonen ATK. Probabilistic Framework for Modelling the Evolution of Geomorphic Features in 10,000-Year Time Scale: The Eurajoki River Case. julkaisussa Geospatial Data in a Changing World: Selected papers of the 19th AGILE Conference on Geographic Information Science. Springer Verlag. 2016. s. 369-382. (Lecture Notes in Geoinformation and Cartography). https://doi.org/10.1007/978-3-319-33783-8

Kähkönen K, Brandt J. Quality evaluation on of contractor’s schedule for building renovation. julkaisussa Ciribini A, Alaimo G, Capone P, Daniotti B, Dell’Osso G, Nicolella M, toimittajat, Re‐shaping the construction industry. ISTeA Italian Society of Science, Technology and Engineering of Architecture; Maggioli Editore. 2017. s. 175-184

Ketonen-Oksi S. Reinventing organisational creativity and innovation through adapting a service-based working culture. julkaisussa Schiuma G, Lerro A, toimittajat, Integrating arts and creativity into business practice. IGI Global. 2017. s. 1-20 https://doi.org/10.4018/978-1-5225-2050-4

Ketonen-Oksi S. Re-inventing organizational creativity and innovation through adopting a service-based working culture. julkaisussa Integrating Art and Creativity into Business Practice. IGI Global. 2016. s. 1-20 https://doi.org/10.4018/978-1-5225-2050-4.ch001

Leppänen M, Sarkkila J, Hämäläinen H, Rinkinen J. Technical suitability of the fine fraction of municipal solid waste incineration bottom ash to the landfill capping liner. julkaisussa Raasakka V, Lahtinen P, toimittajat, Proceedings of the 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials WASCON 2018: No Gradle, No Grave - Circular Economy into Practice. RIL - Finnish Association of Civil Engineers. 2018. s. 168-175

Kärkkäinen H, Jussila J, Erkinheimo P. The New Era of Crowdsourcing — Industrial Crowdsourcing. julkaisussa Salmelin B, toimittaja, Open Innovation Yearbook 2015. Brussel: European Commission. 2015. s. 25-31 https://doi.org/10.2759/92658

Sislian R, da Silva FV, Gedraite R, Jokinen H, Rajan DK. The use of mathematical modeling for the development of a low cost fuzzy gain schedule neutralization control system. julkaisussa Transactions on Engineering Technologies: World Congress on Engineering and Computer Science 2015. Springer Singapore. 2017. s. 525-539 https://doi.org/10.1007/978-981-10-2717-8_37

Multisilta J, Niemi H. Tools, pedagogical models, and best practices for digital storytelling. julkaisussa Khosrow-Pour M, toimittaja, Encyclopedia of information science and technology. 4th toim. IGI Global. 2017

Saari A, Tauriainen M. Townhouse-talotyypin rakennuskustannukset: kolmen suunnitteluratkaisun taloudellisuuden analysointi. julkaisussa Nollaa parempi – Townhouse energiatehokkaassa asuinrakentamisessa. Aalto-yliopisto. 2015. s. 94-97. (Aalto University publication series Crossover; 9/2015).

Ylinen A, Mäkinen J, Kouhia R. Two models for hydraulic cylinders in flexible multibody simulations. julkaisussa Computational Methods for Solids and Fluids: Multiscale Analysis, Probability Aspects and Model Reduction. Springer. 2016. s. 463-493. (Computational Methods in Applied Sciences). https://doi.org/10.1007/978-3-319-27996-1_17

Katko TS, Juuti P, Pietilä P, Rajala R. Water services heritage and institutional diversity. julkaisussa Willems W, van Schaik H, toimittajat, Water and Heritage: material, conceptual and spiritual connections. Sidestone Press. 2015

Salmisto A. How to co-learn in campus. julkaisussa Nenonen S, Kärnä S, Junnonen J-M, Tähtinen S, Sandström N, toimittajat, Oppiva kampus - How to co-create campus?. Tampere: Suomen Yliopistokiinteistöt Oy. 2015. s. 320-337

Seppä V-P, Pelkonen AS, Kotaniemi-Syrjänen A, Viik J, Mäkelä MJ, Malmberg P. Impedanssipneumografia pienten lasten alahengitytiesoireiden selvittelyssä. julkaisussa Allergiatutkimussäätiön vuosikirja 2015. 2015. (Allergiakoulu).

Leppänen M, Välisalo T, (ed.), Laasonen J. Liite 6: Yleistä kaivannaisjätealueista ja patoturvallisuudesta. julkaisussa Kaivosten stressitesti 2013. Ympäristöministeriö. 2014. (Ympäristöministeriön raportteja).

Kotilainen S. Matkalla joustaviin asuinympäristöihin. julkaisussa Joustavat asuinympäristöt: 10 visiota aikaa kestävään kaupunkiasumiseen. Vuosikerta 16. Tampere: Tampereen teknillinen yliopisto. Arkkitehtuurin laitos. 2015. s. 10-13. 1. (Housing Design).

Hynynen A. Puurakentamisesta potkua alueiden ja kaupunkien kehittämiseen. julkaisussa Hynynen A, Panu A-M, Taanila T, toimittajat, Puu-Hubi. : Perinteestä uusiin innovaatioihin. Tampereen teknillinen yliopisto. Arkkitehtuurin laitos. 2015. s. 75-93

Vinha J. Rakennusten rakennusfysikaalisen suunnittelun ja toteutuksen periaatteet. julkaisussa Rakentajain kalenteri 2016. Rakennustieto Oy. 2015. s. 399-426. (Rakentajain kalenteri).

Kylliäinen M. Rakenteiden ääneneristyskyvystä asumismelun kokemiseen. julkaisussa Rakentajain Kalenteri. Helsinki: Rakennustieto Oy. 2015. s. 92-96

Koponen O-P. Tammerkoski ja Hämeenkatu Tampereen arkkitehtonisen identiteetin ankkureina. julkaisussa Hautamäki R, toimittaja, Tampereen tarina: Teollisuuden synnyttämä kaupunki harjujen ja järvien solmukohdassa. Vuosikerta Julkaisuja 5/2015. Kaupunkiympäristön kehittäminen: Tampereen kaupunki. 2015. s. 35-42. (Tampereen kaupunki/Kaupunkiympäristön kehittäminen).

Poutanen J, Peltoniemi S, Pihlajarinne N. Uudet arkkitehtoniset ratkaisumallit muuttavat kampuksien ilmettä. julkaisussa Nenonen S, Kärnä S, Junnonen J-M, Tähtinen S, Sandström N, toimittajat, Oppiva kampus: How to co-create campus?. Tampere: Suomen Yliopistokiinteistöt Oy. 2015. s. 72-93

Lehtovuori P. Uusia tuulia Euroopasta. julkaisussa Asukkaan ehdoilla: moninaisuutta asumamuotoihin. Helsinki: Rakennustieto Oy. 2015. s. 42-59

Niemi H, Kylliäinen M, Jäppinen J, Lindqvist M. 1800-luvun Helsingin kadonneiden konserttitilojen akustiikan mallintaminen. julkaisussa Akustiikkapäivät 2015. Kuopio. 2015. s. 77-82. (Akustiikkapäivät).

Hongisto V, Kylliäinen M, Hyönä J. ÄKK-hankkeen suositukset tulevaisuuden ääneneristysmääräyksiä koskien. julkaisussa Rakennusfysiikka 2015. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 561-566

Salo J, Huttunen P, Vinha J. Alipaineistetun tuulettuvan ryömintätilan rakennusfysikaaliset FEM-simuloinnit. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24-26.10.2017, Tampere. Vuosikerta 2. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 413-422. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka. ).

Belahcen A, Kouhia R, Rasilo P, Ristinmaa M. A model for anisotropic magnetostriction. julkaisussa Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry. 2015. s. 201-203

Yaghoubi ST, Hartikainen J, Kolari K, Kouhia R. An anisotropic continuum damage model for concrete. julkaisussa Kouhia R, Mäkinen J, Pajunen S, Saksala T, toimittajat, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Rakenteiden Mekaniikan Seura ry. 2015. s. 51

Mardoukhi A, Saksala T, Hokka M, Kuokkala V-T. An experimental and numerical study of the dynamic Brazilian disc test on Kuru granite. julkaisussa Proceedings of the XII Finnish Mechanics Day. 2015. s. 210-215

Kylliäinen M, Oliva D, Rekola L, Hongisto V. Asuinhuoneistojen betonivälipohjien askelääneneristyksen subjektiivinen ja objektiivinen arviointi. julkaisussa Akustiikkapäivät 2015. Kuopio: Akustinen seura. 2015. s. 204-207. (Akustiikkapäivät).

Mimilakis SI, Drossos K, Floros A, Katerelos D. Automated Tonal Balance Enhancement for Audio Mastering Applications. julkaisussa Audio Engineering Society Convention 134. AES Audio Engineering Society. 2013

Bautista GS, Johansson A, Parappurath N, Herranen O, Myllyperkiö P, Jiang H et al. Background-Free Second-Harmonic Generation Microscopy of Individual Carbon Nanotubes. julkaisussa Nonlinear Optics 2015: Kauai, Hawaii United States 26–31 July 2015. OSA. 2015. NW1A.5. (Nonlinear Optics Conference Series). https://doi.org/10.1364/NLO.2015.NW1A.5

Laitinen A, Santa-aho S, Lukinmaa H, Suominen L, Vippola M. Barkhausen noise Potcore sensor simulations with Comsol. julkaisussa 12th International Conference on Barkhausen Noise and Micromagnetic Testing. ICBM. 2017. s. 97-107

Vänttinen K, Tuominen E, Vinha J. Betonin kosteusteknisten materiaaliominaisuuksien määrittäminen. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Vuosikerta 2. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 461-470. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Ratia M, Myllärniemi J. Beyond ic 4.0 : the future potential of bi-tool utilization in the private healthcare. julkaisussa 13th International Forum on Knowledge Asset Dynamics, IFKAD 2018: Delft, Netherlands, 4-6 July 2018. 2018. (Proceedings IFKAD).

Toenger S, Godin T, Billet C, Dias F, Erkintalo M, Genty G et al. Breathers Emergence in Spontaneous Modulation Instability. julkaisussa European Quantum Electronics Conference 2015. Optical Society of America (OSA). 2015. EF_P_25

Annila P, Lahdensivu J, Pikkuvirta J, Pakkala T. By64 Tuulettuvat julkisivut 2016 -suunnittelu- ja toteusohjeen laadinta. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 109-114

Sorsa A, Santa-aho S, Aylott C, Shaw B, Vippola M, Leiviskä K. Case depth prediction of nitrided components. julkaisussa 12th International Conference on Barkhausen Noise and Micromagnetic Testing. ICBM. 2017. s. 65-72

Kiilakoski J, Lukac F, Koivuluoto H, Vuoristo P. Cavitation wear characteristics of Al2O3-ZrO2-ceramic coatings deposited by APS and HVOF -processes. julkaisussa Internationl Thermal Spray Conference ITSC 2017, Conference Proceedings: June 7-9, 2017, Düsseldorf, Germany.. Vuosikerta 336. Düsseldorf: DVS Media GmbH. 2017. s. 928-933. (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V.).

Huova M, Ahopelto M, Ketonen M, Ahola V, Linjama M, Huhtala K. Characteristics of Digital Hydraulics with Commercial Controllers. julkaisussa The Seventh Workshop on Digital Fluid Power . Linz Center of Mechatronics. 2015. s. 114-128

Rinkinen J, Elo L. Clean Components of Fluid Power System Reduce Maintenance Costs. julkaisussa Maintenance, Condition Monitoring and Diagnostics; Maintenance Performance Measurement and Management: MCMD 2015 and MPMM 2015. 2015. 2 (2015-10-01)

Holopainen S, Kouhia R, Könnö J, Saksala T. Computational modelling of high-cycle fatigue using a continuum based model. julkaisussa Proceedings of the NSCM28: 28th Nordic Seminar on Computational Mechanics, October 22 – 23, 2015, Tallinn, Estonia. 2015. s. 71-74

Järvinen ST, Saari S, Keskinen J, Toivonen J. Detailed analysis of laser-induced breakdown spectroscopy of single particles using electrodynamic balance trapping. julkaisussa The European Conference on Lasers and Electro-Optics 2015. Optical Society of America. 2015. s. CH_7_5

Cardin J, Dufour C, KHOMENKOV V, Fafin A, Monnet I, Rizza G et al. Development of New Kinds of Plasmonics Materials Through Swift Heavy Ion Shaping Technique. julkaisussa 7th International Conference on Materials for Advanced Technologies (ICMAT 2013), Jun 2013, Suntec, Singapore. Singapore. 2013

Fischer H, Laamanen A, Iso-Heiko A, Schäfer O, Karvonen M, Karhu O et al. Digital Hydraulics on Rails – Pilot Project of Improving Reliability on Railway Rolling Stock by Utilizing Digital Valve System. julkaisussa Laamanen A, Huhtala K, toimittajat, Proceedings of The Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. 2015. s. 644-654

Uusitalo T, Virtanen H, Viheriälä J, Salmi JO, Aho A, Dumitrescu M. Dual-Mode Behavior in Multi-Section DFB Semiconductor Lasers with Laterally-Coupled Ridge-Waveguide Surface Gratings. julkaisussa The European Conference on Lasers and Electro-Optics 2015. OSA - The Optical Society. 2015. CB_P_26

Toenger S, Godin T, Billet C, Dias F, Erkintalo M, Genty G et al. Dynamics of rogue wave and soliton emergence in spontaneous modulation instability. julkaisussa CLEO: QELS - Fundamental Science, CLEO_QELS 2015. Optical Society of America (OSA). 2015 https://doi.org/10.1364/CLEO_QELS.2015.FW4D.2

Sand J, Ihantola S, Peräjärvi K, Toivonen H, Nicholl A, Hrnecek E et al. EMCCD imaging of strongly ionizing radioactive materials for safety and security. julkaisussa 2013 Conference on Lasers and Electro-Optics - International Quantum Electronics Conference. Optical Society of America. 2013. s. JSII_P_1

Drossos K, Floros A, Agavanakis K, Tatlas N-A, Kanellopoulos N. Emergency Voice/Stress - level Combined Recognition for Intelligent House Applications. julkaisussa Audio Engineering Society Convention 132. AES Audio Engineering Society. 2012

Vuolle M, Salonius H-R, Lintinen J, Mäkinen J. Emotion measurement services for knowledge workers. julkaisussa RESER2015: 25th Annual RESER Conference, September 10-12, 2015 Copenhagen, Denmark. Copenhagen: RESER European Association for Research on Services. 2015

Sorri J, Heljo J, Uotila U, Ruusala A. Energiatehokkuusinformaatio palvelurakennuksissa. julkaisussa Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut : 24.-26.10.2017, Tampere. Vuosikerta 1. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 325-330. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Heljo J, Sorri J, Harsia P. Energiatehokkuus on entistä enemmän sähkötehon hallintaa. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Vuosikerta 1. Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 281-286. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Teriö O, Sorri J. Energiatehokkuus rakennusalan ammattityövoiman täydennyskoulutuksessa. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 97-102

Kylliäinen M, Niemi H, Jäppinen J, Lindqvist M. Engelin teatterin huoneakustiikan mallintaminen. julkaisussa Akustiikkapäivät 2015. Akustinen seura. 2015. s. 145-150. (Akustiikkapäivät).

Kauranen M, Czaplicki R, Mäkitalo J, Lehtolahti J, Koskinen K, Laukkanen J et al. Enhancement mechanisms for second-harmonic generation from metal nanostructures. julkaisussa PROCEEDINGS OF SPIE: Ultrafast Phenomena and Nanophotonics XX. Vuosikerta 9746. 2015

Ryczkowski P, Barbier M, Friberg AT, Dudley JM, Genty G. Experimental demonstration of temporal ghost imaging. julkaisussa 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference. OSA. 2015. CF6_3

Abe S, Ylinen A, Narra Girish N, Nikander R, Hyttinen J, Kouhia R et al. Exploration of different boundary conditions in the sideways falling situation in hip fracture finite element modelling. julkaisussa Proceeding of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry. 2015. s. 130-135

Kunwar P, Hassinen J, Bautista G, Ras RHA, Toivonen J. Fabrication of Fluorescent Silver Nanoclusters-based Micro-Label in Polymers. julkaisussa The European Conference on Lasers and Electro-Optics 2015. OSA. 2015. CM_P_5. (European Conference on Lasers and Electro-Optics Europe and International Quantum Electronics Conference).

Kantola E, Leinonen T, Ranta S, Tavast M, Guina M. High-efficiency yellow VECSEL with 20 W output power. julkaisussa Optics Days 2013, Helsinki, Finland: Oral presentation in Optics Days 2013, Helsinki, Finland. 2013

Kankkunen T, Kero P. Hometalolle suoritettavat toimenpiteet ja niiden valinta - case-esimerkki. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 265-270

Linjama M, Huova M, Pietola M, Juhala J, Huhtala K. Hydraulic Hybrid Actuator: Theoretical Aspects and Solution Alternatives. julkaisussa Laamanen A, Huhtala K, Uusi-Heikkilä J, toimittajat, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power. Tampere: Tampere University of Technology. 2015

Kylliäinen M, Takala J, Hongisto V. Ilmaääneneristysluku sekä standardisoitu ja normalisoitu äänitasoeroluku huoneistojen välisen ilmaääneneristävyyden kuvaajina. julkaisussa Akustiikkapäivät 2015. Kuopio: Akustinen seura. 2015. s. 158-161. (Akustiikkapäivät).

Pakkala T, Lemberg A-M, Köliö A, Lahdensivu J. Ilmastonmuutoksen vaikutus betonijulkisivujen vaurioitumisen etenemiseen. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut, 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 203-210

Toenger S, Ahvenjärvi J, Ryczkowski P, Genty G. Intensity Interferometry of Supercontinuum Light. julkaisussa Setälä T, Turunen J, T. Friberg A, Saastamoinen K, toimittajat, Trends in Electromagnetic Coherence. Joensuu: University of Eastern Finland. 2018. (Publications of the University of Eastern Finland. Reports and studies in forestry and natural sciences; 32).

Drossos K, Kotsakis R, Pappas P, Kalliris G, Floros A. Investigating Auditory Human-Machine Interaction: Analysis and Classification of Sounds Commonly Used by Consumer Devices. julkaisussa Audio Engineering Society Convention 134. AES Audio Engineering Society. 2013. 8812

Pakkala T, Lahdensivu J, Köliö A, Annila P. Julkisivujen ja parvekkeiden talvikorjausohje. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut, 24-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 179-184. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Tuominen E, Vinha J. Kapillaaristen vedenimuominaisuuksien määrittämiseen sopivan vapaan vedenimukoelaitteiston kehittäminen. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 233-238

Palvalin M, Vuori V, Helander N. Knowledge transfer and work productivity. julkaisussa Spender JC, Schiuma G, Gavrilova T, toimittajat, Proceedings of 12th International Forum on Knowledge Asset Dynamics: St. Petersburgh, Russia 7-9 June 2017. 2017. s. 1120-1134. (Proceedings IFKAD).

Hilliaho K, Nordquist B, Wallentén P. Koko Julkisivua peittävän lasijulkisivun vaikutus Etelä-Ruotsissa sijaitsevan rakennuksen energiatehokkuuteen. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 509-516. (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu 4; 4).

Annila P, Hellemaa M, Suonketo J, Pentti M. Kosteus- ja mikrobivaurioiden laajuus kuntien rakennuksissa. julkaisussa Säteri J, Ahola M, toimittajat, Sisäilmastoseminaari 2015 SIY Raportti 33, Messukeskus, Helsinki 11.3.2015. Juva. 2015. s. 95-100. (SIY Raportti).

Annila P, Lahdensivu J, Suonketo J, Pentti M, Laukkarinen A, Vinha J. Kosteusvaurioiden vakavuus kuntien rakennuksissa. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Vuosikerta 1. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 135-140. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Ruusala A, Vinha J. Koulujen ja päiväkotien laskettu ja toteutunut energiankulutus. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Vuosikerta 1. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 267-274. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Sekki P, Korhonen L, Vinha J. Kuorielementtien kuivumisen mallintaminen hydrataation huomioivalla FEM-laskennalla. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Vuosikerta 2. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 399-405. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka. ).

Jokisalo J, Sankelo P, Sirén K, Vinha J. Kustannusoptimaaliset energiakorjaus- ja uusiutuvan energian tuotannon ratkaisut kunnallisissa palvelurakennuksissa. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Vuosikerta 1. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 287-292

Tuominen E, Vinha J. Laastien vedenimukertoimen määrittämisen virhelähdekokeet. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 239-244

Ruuska T, Vinha J. Laastin ja betonin lämmönjohtavuuden ja ominaislämpökapasiteetin määrittäminen lämpövirtalevylaitteella. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 227-232

Laukkarinen A, Hilliaho K. Lasitetun parvekkeen lämpötilan ja lämpöhäviöiden laskenta. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 181-186. (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; 4).

Myllärniemi J, Pekkola S, Helander N. Lessons for data-based value creation. julkaisussa 12th International Forum on Knowledge Asset Dynamics, IFKAD 2017. 2017. s. 398-407. (Proceedings IFKAD).

Kolu A, Rajapolvi K, Hyvönen M, Multanen P, Huhtala K. Low-cost 3D lidar for the mapping of autonomous mobile work machine. julkaisussa Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. 2015

Laukkarinen A, Heiskanen R, Vinha J. Maanvastaisten seinien lämpö- ja kosteustekninen toiminta. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Vuosikerta 1. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 71-76. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Kovalainen V, Kylliäinen M. Menetelmä parvekelasien ääneneristävyyden mitoittamiseksi liikennemelualueilla. julkaisussa Rakennusfysiikka 2015. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 617-622

Saarelainen J, Kylliäinen M, Hupaniittu O. Mykkäelokuvakauden elokuvateatterien huoneakustiikka. julkaisussa Akustiikkapäivät 2015. Kuopio: Akustinen seura. 2015. s. 83-88. (Akustiikkapäivät).

Linjama M, Siivonen L, Huova M. Numerically Efficient Flow Model for On/Off Valves. julkaisussa Scheidl R, Winkler B, Kogler H, toimittajat, Proceedings of the Seventh Workshop on Digital Fluid Power. Linz, Austria: LCM GmbH. 2015. s. 164-172

Marttila T, Suonketo J, Kero P, Annila P. Onnistumistekijät valtion tukemissa homekorjaushankkeissa. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut, 20-22.10.2015, Tampere. Vuosikerta 4. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 253-258. 152

Saksala T, Holopainen S, Kouhia R. On the choice of damage variable in the continuum fatigue model based on a moving endurance surface. julkaisussa Proceedings of the XII Finnish Mechanics Day. 2015. s. 57-62

Jeronen J, Kouhia R. On the effect of damping on stability of non-conservative systems. julkaisussa Kouhia R, Mäkinen J, Pajunen S, Saksala T, toimittajat, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Rakenteiden Mekaniikan Seura ry. 2015. s. 77

Kauppinen A, Kiviste M, Pirhonen J, Vinha J. Paine-erot Pirkanmaan ja Helsingin julkisissa palvelurakennuksissa. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24-26.10.2017, Tampere. Vuosikerta 1. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 215-221. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Vuolle M, Sillanpää V. Performance management practices in construction business - a service recovery perspective. julkaisussa 8th Conference on Performance Measurement and Management Control. The European Institute for Advanced Studies in Management, EIASM. 2015. (Conference on Performance Measurement and Management Control).

Laukkarinen A, Musakka S, Penttilä O, Teriö O, Vinha J. Puukerrostalon työmaavaiheen lämpö- ja kosteusolosuhteiden mittaukset. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Vuosikerta 1. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 167-172. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Teriö O, Penttilä O, Laukkarinen A, Musakka S, Vinha J. Puukerrostalorakentamisen kosteudenhallinta. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Vuosikerta 1. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 173-178. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Junttila H, Laukkarinen A, Vinha J. Puurunkoisten tuuletettujen yläpohjien kosteustekninen toiminta. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere.. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 77-82. (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; 4).

Latvanne P, Kylliäinen M. Puuvälipohjien akustiset ominaisuudet. julkaisussa Rakennusfysiikka 2015. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 567-572

Heljo J, Kauppinen T. Pystytäänkö haitallisia ilmanvaihtovikoja havaitsemaan ja poistamaan. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 325-330

Pietilä J, Mäkinen J. Raudoitetun betonirakenteen taivutuksen mallintaminen Ansys-ohjelmalla. julkaisussa Kouhia R, Mäkinen J, Pajunen S, Saksala T, toimittajat, Proceedings of the XII Finnish Mechanics Days. Helsinki: Rakenteiden Mekaniikan Seura ry. 2015. s. 91-96

Köliö A, Hohti H, Pakkala T, Laukkarinen A, Lahdensivu J, Mattila J. Raudoitteiden korroosionopeuden määrittäminen betonijulkisivussa korkean aikaresoluution säädatan avulla. julkaisussa Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere.. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 195-202. (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; 4).

Sand J, Ihantola S, Nicholl A, Hrnecek E, Toivonen J, Toivonen H et al. Scanning of radioluminescence emission with a PMT for remote detection of alpha contamination. julkaisussa The European Conference on Lasers and Electro-Optics 2015. Optical Society of America. 2015. CN_2_3

Slablab A, Divya S, Koskinen K, Czaplicki R, Kailasnath M, Radhakrishnan P et al. Second-harmonic generation from thermally-evaporated indium selenide thin films. julkaisussa The European Conference on Lasers and Electro-Optics 2015: Munich Germany 21–25 June 2015. Optical Society of America. 2015. s. CE_12_4

Ryczkowski P, Barbier M, Friberg AT, Dudley JM, Genty G. Shadow Ghost Imaging in the Time Domain. julkaisussa Frontiers in Optics 2015. OSA. 2015. FW6C.1 https://doi.org/10.1364/FIO.2015.FW6C.1

Contreras V, Lonnqvist J, Toivonen J. Single micro-particle scattering detection based on Edge Filter Enhanced Self-Mixing Interferometry. julkaisussa 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference. Optical Society of America. 2015. s. CH_P_11

Kokkinis E, Drossos K, Tatlas N-A, Floros A, Tsilfidis A, Agavanakis K. Smart microphone sensor system platform. julkaisussa Audio Engineering Society Convention 132. AES Audio Engineering Society. 2012

Jussila J, Helander N, Vuori V, Okkonen J. Sosiaalinen media brändi- ja asiakastiedon lähteenä. julkaisussa Tuomi P, toimittaja, TiedeAreena 2016. Vuosikerta 11. Pori: Tampereen teknillinen yliopisto, Porin laitos. 2016. s. 55-56

Poikonen E, Martinsuo M, Nenonen S. Standardizing the service delivery system for repetitive industrial services. julkaisussa RESER 2015: 25th Annual RESER Conference. RESER European Association for Research on Services. 2015

Tuominen E, Vainio M, Vinha J. Suomessa markkinoilla olevien kalsiumsilikaattilevyjen rakennusfysikaaliset materiaaliominaisuudet. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Vuosikerta 2. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 455-460. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka. ).

Huttunen P, Rantala J, Vinha J. Suuren lämmöneristämättömän maanvastaisen alapohjan vaikutus rakennuksen energiankulutukseen. julkaisussa Vinha J, Kivioja H, toimittajat, Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24-26.10.2017, Tampere. Vuosikerta 1. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017. s. 335-342. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Ryczkowski P, Barbier M, Friberg AT, Dudley JM, Genty G. Temporal Ghost Imaging. julkaisussa Frontiers in Optics 2015. OSA. 2015. FTh4D.4 https://doi.org/10.1364/FIO.2015.FTh4D.4

Kraft T, Cristoferi C, Trigaud T, Nunzi J-M, Ratier B. The Parallel Diode and Trap Behaviour of Ternary Polymer Solar Cells. julkaisussa EU PVSEC Proceedings. Vuosikerta EU PVSEC 2014. EU PVSEC. 2014. 3BV.5.23

Fard Sanei MA, Kiilunen J, Pippola J, Lahokallio S, Frisk L. Thermomechanical properties of overmold epoxies in MEMS packaging. julkaisussa Proceedings of the IMAPS Nordic Annual Conference , June 8-9, 2015, Helsingør, Denmark. IMAPS Nordic. 2015. s. 175-179

Holopainen S. Transpositions and duals high-order tensors. On theory and applications in mechanics. julkaisussa Kouhia R, toimittaja, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Rakenteiden Mekaniikan Seura ry. 2015. s. 188-193. (Journal of Structural Mechanics).

Turquet L, Bautista G, Karvonen L, Dhaka V, Chen Y, Jiang H et al. Tunable nonlinear effects through focused spatially phase-shaped beams. julkaisussa European Quantum Electronics Conference 2015. Optical Society of America. 2015. EG_P_11

Ocaña Flores M, Martinsuo M. Use of equipment lifecycle data in industrial services. julkaisussa RESER 2015: 25th Annual RESER Conference. Copenhagen: RESER European Association for Research on Services. 2015

Vinha J, Hedman M, Sirén K, Harsia P, Pentti M, Teriö O et al. Uudessa COMBI-hankkeessa tutkitaan energiatehokkaan palvelurakentamisen haasteita ja ratkaisuja. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere.. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 487-496. (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; 4).

Vinha J. Uusi Rakennusfysiikan käsikirja. julkaisussa Sisäilmastoseminaari 2015. 2015. s. 167-172. (Sisäilmastoyhdistys raportti; 33).

Vinha J. Uusi Rakennusfysiikan käsikirja - perustiedot rakennusfysikaalisesta suunnittelusta ja tutkimuksista. julkaisussa Vinha J, Ruuska T, toimittajat, Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. 2015. s. 115-120

Marttila T, Suonketo J, Kero P, Annila P, Pentti M. Valtion tukemien homekorjaushankkeiden arviointi (HKPro 2). julkaisussa Säteri J, Ahola M, toimittajat, Sisäilmastoseminaari 2015 SIY Raportti 33, Messukeskus, Helsinki 11.3.2015: Sisäilmastoseminaari. Vuosikerta Sisäilmayhdistys raportti 33. Juva. 2015. s. 101-106

Annila P, Marttila T, Kero P, Suonketo J, Pentti M. Valtion tukemien homekorjaushankkeiden arviointi -jatkotutkimus (HKPro 3). julkaisussa Säteri J, Ahola M, toimittajat, Sisäilmastoseminaari 2015 SIY Raportti 33, Messukeskus, Helsinki 11.3.2015. Vuosikerta Sisäilmayhdistys raportti 33. Juva. 2015. s. 107-112. (Sisäilmayhdistys).

Moilanen C, Björkqvist T, Saarenrinne P. Wood compression model for radial compression of earlywood and latewood. julkaisussa Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry. 2015. s. 261-266

Viheriälä J, Aho A, Virtanen H, Koskinen M, Dumitrescu M, Guina M. 1180 nm GaInNAs quantum well based high power DBR laser diodes. julkaisussa Zediker MS, toimittaja, High-Power Diode Laser Technology XV. SPIE. 2017. 100860K. (Proceedings of SPIE). https://doi.org/10.1117/12.2251317

Kantola E, Leinonen T, Ranta S, Tavast M, Penttinen J-P, Guina M. 1180nm VECSEL with 50 W output power. julkaisussa Proceedings of SPIE - The International Society for Optical Engineering. Vuosikerta 9349. SPIE. 2015. 93490U https://doi.org/10.1117/12.2079480

Viheriälä J, Tuorila H, Zia N, Cherchi M, Aalto T, Guina M. 1.3μm U-bend traveling wave SOA devices for high efficiency coupling to silicon photonics. julkaisussa Reed GT, Knights AP, toimittajat, Silicon Photonics XIV. SPIE, IEEE. 2019. 109230E. (Proceedings of SPIE - The International Society for Optical Engineering). https://doi.org/10.1117/12.2505935

Mereuta A, Nechay K, Caliman A, Suruceanu G, Gallo P, Guina M et al. 1.55-μm wavelength wafer-fused OP-VECSELs in flip-chip configuration. julkaisussa Keller U, toimittaja, Vertical External Cavity Surface Emitting Lasers (VECSELs) IX. SPIE, IEEE. 2019. 1090103. (Proceedings of SPIE - The International Society for Optical Engineering). https://doi.org/10.1117/12.2508342

Schwarz S, Hannuksela MM, Fakour-Sevom V, Sheikhi-Pour N. 2D Video Coding of Volumetric Video Data. julkaisussa 2018 Picture Coding Symposium, PCS 2018 - Proceedings. IEEE. 2018. s. 61-65. 8456265 https://doi.org/10.1109/PCS.2018.8456265

Fakour-Sevom V, Guldogan E, Kämäräinen J-K. 360 panorama super-resolution using deep convolutional networks. julkaisussa VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications . Vuosikerta 4. SCITEPRESS. 2018. s. 159-165 https://doi.org/10.5220/0006618901590165

Yadav A, Chichkov NB, Gumenyuk R, Zherebtsov E, Melkumov MA, Yashkov MV et al. 405-nm pumped Ce3+-doped silica fiber for broadband fluorescence from cyan to red. julkaisussa Digonnet MJF, Jiang S, toimittajat, Optical Components and Materials XVI. SPIE, IEEE. 2019. 1091406. (Proceedings of SPIE - The International Society for Optical Engineering). https://doi.org/10.1117/12.2509599

Kantola E, Leinonen T, Penttinen J-P, Tavast M, Ranta S, Guina M. 50 W VECSEL emitting at 1180 nm. julkaisussa 2015 Conference on Lasers and Electro-Optics Europe - European Quantum Electronics Conference, 21.-25.6. Munich, Germany: CB_3_1. OSA. 2015

Saarinen EJ, Lyytikäinen J, Ranta S, Rantamäki A, Saarela A, Sirbu A et al. A 1.5-W frequency doubled semiconductor disk laser tunable over 40 nm at around 745 nm. julkaisussa Proceedings of SPIE: Vertical External Cavity Surface Emitting Lasers (VECSELs) VI. Vuosikerta 9734. SPIE. 2016. 97340P-8. (Spie conference proceedings). https://doi.org/10.1117/12.2209384

Ma S, Pournoori N, Sydänheimo L, Ukkonen L, Björninen T, Georgiadis A. A Batteryless Semi-Passive RFID Sensor Platform. julkaisussa 2019 IEEE International Conference on RFID Technology and Applications (RFID-TA). IEEE. 2019. s. 171-173 https://doi.org/10.1109/RFID-TA.2019.8892176

Jussila JJ, Mustafee N, Aramo-Immonen H, Menon K, Hajikhani A, Helander N. A bibliometric study on authorship trends and research themes in knowledge management literature. julkaisussa 12th International Forum on Knowledge Asset Dynamics, St. Petersburg, Russia 7-9 June 2017: Knowledge Management in the 21th Century: Resilience, Creativity and Co-creation. Vuosikerta 12. St. Petersburg, Russia. 2017. s. 389-397

Galinina O, Turlikov A, Pyattaev A, Johnsson K, Andreev S, Koucheryavy Y. A Capacity Bound for mmWave-based Channel Access in Ultra-Dense Wearable Deployments. julkaisussa 2015 7th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). IEEE. 2015. s. 298-304 https://doi.org/10.1109/ICUMT.2015.7382446

Drossos K, Zormpas N, Giannakopoulos G, Floros A. Accessible Games for Blind Children, Empowered by Binaural Sound. julkaisussa Proceedings of the 8th ACM International Conference on PErvasive Technologies Related to Assistive Environments. New York, NY, USA: Association for Computing Machinery (ACM). 2015. s. 5:1-5:8. (PETRA '15). https://doi.org/10.1145/2769493.2769546

Davidson P, Raunio JP, Piché R. Accurate depth estimation from a sequence of monocular images supported by proprioceptive sensors. julkaisussa 23rd Saint Petersburg International Conference on Integrated Navigation Systems, ICINS 2016 - Proceedings. State Research Center of the Russian Federation. 2016. s. 249-257

Vehmas R, Jylhä J, Väilä M, Kylmälä J. A computationally feasible optimization approach to inverse SAR translational motion compensation. julkaisussa Proceedings of the 12th European Radar Conference (EuRAD 2015). IEEE. 2015. s. 17-20 https://doi.org/10.1109/EuRAD.2015.7346226

Kauppila P, Kouhia R, Ojanperä J, Saksala T, Sorjonen T. A continuum damage model for creep fracture and fatigue analyses. julkaisussa 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy. 2016. s. 887–894. (Procedia Structural Integrity). https://doi.org/10.1016/j.prostr.2016.06.114

Aldawood S, Fowley F, Pahl C, Taibi D, Liu X. A coordination-based brokerage architecture for multi-cloud resource markets. julkaisussa Proceedings - 2016 4th International Conference on Future Internet of Things and Cloud Workshops, W-FiCloud 2016. Institute of Electrical and Electronics Engineers Inc. 2016. s. 7-14 https://doi.org/10.1109/W-FiCloud.2016.19

Georgiev GY, Aho T, Kesseli J, Yli-Harja O, Kauffman SA. Action and power efficiency in self-organization: The case for growth efficiency as a cellular objective in escherichia coli. julkaisussa Flores Martinez CL, Georgiev GY, Smart JM, Price ME, toimittajat, Evolution, Development and Complexity - Multiscale Evolutionary Models of Complex Adaptive Systems. Springer. 2019. s. 229-244. (Springer Proceedings in Complexity). https://doi.org/10.1007/978-3-030-00075-2_8

Voronin V, Pismenskova M, Zelensky A, Cen Y, Nadykto A, Egiazarian K. Action recognition using the 3D dense microblock difference. julkaisussa Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies II. SPIE. 2018. 108020O. (Proceedings of SPIE). https://doi.org/10.1117/12.2326801

Martinsuo M, Vuorinen L. Actors’ agency in the routines of innovation project portfolio management. julkaisussa Proceedings of the EURAM European Academy of Management Conference 2019: 26-28 June 2019, Lisbon, Portugal. European Academy of Management, EURAM. 2019. (EURAM conference).

Ketonen-Oksi S. Adapting service-based working culture as the key driver for organisational creativity and innovation. julkaisussa Towards a new architecture of knowledge : Big Data, culture and creativity: IFKAD 2016-11th International Forum on Knowledge Asset Dynamics, Dresden 15-17.6.2016, Germany. 2016

M. Aref M, Astola P, Vihonen J, Tabus I, Ghabcheloo R, Mattila J. Adaptive Feedback in Local Coordinates for Real-time Vision-Based Motion Control Over Long Distances. julkaisussa International Conference on Robotics and Mechantronics : (ICRoM 2017). Vuosikerta 320. IOP Publishing Ltd. 2018. 012009. (IOP conference series : materials science and engineering). https://doi.org/10.1088/1757-899X/320/1/012009

Ketonen-Oksi S, Jalonen H. Advocator, jester, spokesperson, provocateur and boundary spanner? Exploring different communication styles at twitter. julkaisussa 12th Conference proceedings of IFKAD2017: St.Petersburg, Russia, 7-9 June 2017. 2017. (Proceedings IFKAD).

Lenarduzzi V, Stan AC, Taibi D, Tosi D, Venters G. A dynamical quality model to continuously monitor software maintenance. julkaisussa Proceedings of the 11th European Conference on Information Systems Management, ECISM 2017. Academic Conferences and Publishing International Limited. 2017. s. 168-178

Yli-Fossi T, Kuusisto R. A dynamic paper machine simulator for testing of model predictive control applications. julkaisussa Proceedings of AutomaatioXXI seminaari. Suomen Automaatioseura ry. 2015. s. 1-6. (SAS julkaisusarja; 42).

Helander N, Boedeker M, Hellsten P, Jussila J, Myllärniemi J, Tukiainen M. Affective experiences and student engagement in higher education. julkaisussa 44th Annual Conference Of The European Society For Engineering Education: 12-15 September 2016, Tampere, Finland. Tampere. 2016

Vainio VV, Pulkkinen A. A follow-up case study of the relation of PLM Architecture, Maturity and Business processes. julkaisussa Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. Springer New York LLC. 2016. s. 867-873. (IFIP Advances in Information and Communication Technology). https://doi.org/10.1007/978-3-319-33111-9_79

Ahola T, Ståhle M, Martinsuo M. Agency relationships in global project business. julkaisussa Proceedings of EURAM18 European Academy of Management conference 2018. European Academy of Management, EURAM. 2018. (EURAM conference).

Stormi K, Laine T, Korhonen T. Agile methods in performance management system development process. julkaisussa 10th Conference On New Directions In Management Accounting, Brussels, Belgium, December 14-16, 2016. 2016

Kerst T, Toivonen J. Alpha radiation induced luminescence in solar blind spectral region. julkaisussa CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018 https://doi.org/10.1364/CLEO_AT.2018.ATh4O.8

Van Mellaert R, Mela K, Tiainen T, Heinisuo M, Lombaert G, Schevenels M. A mixed-integer linear programming approach for global discrete size optimization of frame structures. julkaisussa ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering: Crete; Greece; 5 June 2016 through 10 June 2016. Vuosikerta 2. National Technical University of Athens. 2016. s. 3395-3408

Salpavaara T, Lekkala J. A model based analysis of the measurement errors in inductively coupled passive resonance sensors. julkaisussa Holub J, toimittaja, IMEKO XXI World Congress, Proceedings, August 30 - September 4, 2015, Prague, Czech Republic. 2015

Jääskeläinen A, Sillanpää V, Helander N. A model for profiling information and knowledge management in the public sector. julkaisussa Proceedings of 14th IFKAD 2019 conference: Matera, Italy, 5-7 June. . 2019. (Proceedings IFKAD).

Aapro A, Messo T, Suntio T. An accurate small-signal model of a three-phase VSI-based photovoltaic inverter with LCL-filter. julkaisussa 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia). 2015. s. 2267-2274 https://doi.org/10.1109/ICPE.2015.7168092

Ho-Van K, Sofotasios PC, Que Son V, Thanh Tra L, Hong Lien P. Analysis of Cognitive Cooperative Networks with Best Relay Selection and Diversity Reception. julkaisussa 2015 International Conference on Advanced Technologies for Communications (ATC). IEEE. 2015. s. 651-656 https://doi.org/10.1109/ATC.2015.7388412

Peng Z, Richter P, Leppäkoski H, Lohan E-S. Analysis of Crowdsensed WiFi Fingerprints for Indoor Localization. julkaisussa Proceedings of the 21st Conference of Open Innovations Association FRUCT. Helsinki, Finland: FRUCT. 2017. s. 268-277

Alexandru RC, Lohan E-S. Analysis of Real Mobility Records in Urban and Suburban Environments. julkaisussa 26TH DAAAM International Symposium on Intelligent Manufacturing and Automation. DAAAM International. 2016. s. 0688-0692 https://doi.org/10.2507/26th.daaam.proceedings.094

Laitinen J, Niemi A. Analysis of the aircraft operational reliability research series: From statistical models to avionics data monitoring. julkaisussa Proceedings of the 9th World congress on engineering asset management (WCEAM 2014), Pretoria, South Africa 28-31 Oct, 2014. 2015

Fedotov A, Pominova D, Orlovskaya E, Orlovskii Y, Niemi T, Gumenyuk R. Analysis of upconversion nanoparticles as an active medium for upconversion light sources. julkaisussa Proceedings of SPIE: Optical Components and Materials XVI. Vuosikerta 10914. S P I E - International Society for Optical Engineering. 2019. 109140R. (Proceedings of SPIE : the International Society for Optical Engineering). https://doi.org/10.1117/12.2507599

Monakhov D, Naik D, Curcio IDD, Toukomaa H. Analysis of User Exploration Patterns during Scene Cuts in Omnidirectional Videos. julkaisussa SMPTE 2018. SMPTE. 2018 https://doi.org/10.5594/M001845

Lampio K, Karvinen R. A new method to calculate natural convection heat transfer from a non-isothermal fin array. julkaisussa Neshumayev D, Sunden B, toimittajat, Proceedings of the 7th Baltic Heat Transfer Conference, August 24-26 2015, Tallinn Estonia. Tallinn: Tallinn University of Technology. 2015. (Baltic Heat Transfer Conference BHTC).

Alberucci A, Pannian JC, Slussarenko S, Piccirillo B, Santamato E, Marrucci L et al. A new waveguiding mechanism based upon geometric phase. julkaisussa Frontiers in Optics 2016. Optical Society of America (OSA). 2016. FF3H.3

Suojanen M, Kuikka V, Nikkarila JP, Nurmi J. An example of scenario-based evaluation of military capability areas An impact assessment of alternative systems on operations. julkaisussa 9th Annual IEEE International Systems Conference, SysCon 2015 - Proceedings. The Institute of Electrical and Electronics Engineers, Inc. 2015. s. 601-607 https://doi.org/10.1109/SYSCON.2015.7116817

Rivero-Rodriguez A, Pileggi P, Nykänen O. An Initial Homophily Indicator to Reinforce Context-Aware Semantic Computing. julkaisussa 7th International Conference on Computational Intelligence, Communication Systems and Networks (CICSyN). Riga: IEEE. 2015. s. 89-93. (International Conference on Computational Intelligence, Communications and Networks). https://doi.org/10.1109/CICSyN.2015.26

Nurminen H, Ardeshiri T, Piche R, Gustafsson F. A NLOS-robust TOA positioning filter based on a skew-t measurement noise model. julkaisussa 2015 International Conference on Indoor Positioning and Indoor Navigation (IPIN). IEEE. 2015. s. 1-7 https://doi.org/10.1109/IPIN.2015.7346786

Krogerus T, Hyvönen M, Backas J, Huhtala K. Anomaly Detection and Diagnostics of a Wheel Loader Using Dynamic Mathematical Model and Joint Probability Distributions. julkaisussa Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation. 2015. (The Scandinavian International Conference on Fluid Power).

Kivimäki J, Suntio T. Appearance of a Drift Problem in Variable-step Perturbative MPPT Algorithms. julkaisussa 31st European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC). 2015. s. 1602-1608 https://doi.org/10.4229/EUPVSEC20152015-5AO.9.2

Saari M, Mäkinen T, Linna P. Applying third-party moocs in programming education: a case study. julkaisussa 9th International Conference on Education and New Learning Technologies: 3-5 July, 2017 Barcelona, Spain. Barcelona, Spain: IATED. 2017. s. 53-59 https://doi.org/10.21125/edulearn.2017.1014

Taibi D, Lenarduzzi V, Pahl C. Architectural patterns for microservices: A systematic mapping study. julkaisussa CLOSER 2018 - Proceedings of the 8th International Conference on Cloud Computing and Services Science. SCITEPRESS. 2018. s. 221-232 https://doi.org/10.5220/0006798302210232

Iarovyi S, Xu X, Lobov A, Lastra JLM, Strzelczak S. Architecture for Open, Knowledge-Driven Manufacturing Execution System. julkaisussa Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth. Springer. 2015. s. 519-527 https://doi.org/10.1007/978-3-319-22759-7_60

Silverajan B, Zhao H, Kamath A. A Semantic Meta-Model Repository for Lightweight M2M. julkaisussa 2018 IEEE International Conference on Communication Systems, ICCS 2018. IEEE. 2019. s. 468-472 https://doi.org/10.1109/ICCS.2018.8689185

Jääskeläinen A, Schiele H, Aarikka-Stenroos L. A social capital perspective on gaining optimal solutions from suppliers as preferred customer. julkaisussa Academy of Management Proceedings. 1 toim. Vuosikerta 2018. Academy of Management AOM. 2018. (Academy of Management Proceedings; 1). https://doi.org/10.5465/AMBPP.2018.16278abstract

Drossos K, Floros A, Potirakis S, Tatlas N-A, Tuna G. A Socially-Intelligent Multi-Robot Service Team for In-Home Monitoring. julkaisussa Information, Intelligence, Systems and Applications, IISA 2014, The 5th International Conference on. IEEE. 2014. s. 159-164 https://doi.org/10.1109/IISA.2014.6878763

Nisula K, Pekkola S. Assessing business learning by analysing ERP simulation log files. julkaisussa AIS SIGED 2016 Conference on IS education and Research. : Dublin, Ireland, December 10-11, 2016. Dublin. 2016

Einolander J, Vanharanta H. Assessment of student retention using the Evolute approach, an overview. julkaisussa 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015. Elsevier. 2015. s. 581–586. (Procedia Manufacturing). https://doi.org/10.1016/j.promfg.2015.07.269

D'Ignazio M, Di Buo B, Länsivaara T. A study on the behaviour of the weathered crust in the Perniö failure test. julkaisussa Proceedings of the XVI ECSMGE 2015: 13-17 September 2015 - Edinburgh, Geotechnical Engineering for Infrastructure and Development. ICE Publishing. 2015. s. 3639-3644

Lohan E-S, Kauppinen T, Debnath SBC. A Survey of People Movement Analytics Studies in the Context of Smart Cities. julkaisussa Proceedings of the FRUCT’19. 2016. s. 151-158 https://doi.org/10.23919/FRUCT.2016.7892195

Prudanov A, Tkachev S, Golos N, Masek P, Hosek J, Fujdiak R et al. A trial of yoking-proof protocol in RFID-based smart-home environment. julkaisussa Distributed Computer and Communication Networks - 19th International Conference, DCCN 2016, Revised Selected Papers. Vuosikerta 678. Springer Verlag. 2016. s. 25-34. (Communications in Computer and Information Science). https://doi.org/10.1007/978-3-319-51917-3_3

Heinimäki TJ, Elomaa T. Augmenting Technology Trees: Automation and Tool Support. julkaisussa Proceedings of the Seventh International Conference on Virtual Worlds and Games for Serious Applications (VS-Games 2015). IEEE. 2015. s. 68-75 https://doi.org/10.1109/VS-GAMES.2015.7295765

Halbach E, Kolu A, Ghabcheloo R. Automated pile transfer work cycles with a robotic wheel loader. julkaisussa Mela K, Pajunen S, Raasakka V, toimittajat, 17th International Conference on Computing in Civil and Building Engineering (ICCCBE): Tampere, 5-7 June 2018. Tampere, Finland: RIL. 2018

Zare M, Neeli-Venkata R, Martins L, Peltonen S, Ruotsalainen U, Ribeiro AS. Automatic Classification of Z-ring Formation Stages at the Single Cell Level in Escherichia Coli by Machine Learning. julkaisussa Silveira M, Fred A, Gamboa H, Vaz M, toimittajat, Proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies, Vol 2: Bioimaging. SCITEPRESS. 2017. s. 72-76

Fouladi A, Järvenhaara J, Filanovsky IM, Tchamov NT. A Variable Battery Supply DC-DC Buck Converter Designed for 45nm-CMOS Technology. julkaisussa 2016 IEEE Canadian Conference on Electrical and Computer Engineering (CCECE), Vancouver, May 15-18, 2016.. 2016 https://doi.org/10.1109/CCECE.2016.7726839

Lehtonen V, Länsivaara T. Back-calculation of the Saint-Alban A test embankment with a new modelling approach in LEM. julkaisussa Proceedings of the The 17th Nordic Geotechnical Meeting, Reykjavik Iceland: 25th - 28th of May 2016. 2016. s. 691-699

Salo K, Giova D, Mikkonen T. Backend infrastructure supporting audio augmented reality and storytelling. julkaisussa Human Interface and the Management of Information: Applications and Services: 18th International Conference, HCI International 2016 Toronto, Canada, July 17-22, 2016. Proceedings, Part II. Springer Verlag. 2016. s. 325-335. (Lecture Notes in Computer Science). https://doi.org/10.1007/978-3-319-40397-7_31

Värri A. Balancing Expectations to the Health Software Production Process Standard. julkaisussa The 3rd International Virtual Research Conference In Technical Disciplines. 2015. (RCITD - Proceedings in Research Conference in Technical Disciplines). https://doi.org/10.18638/rcitd.2015.3.1.71

Tariq AB. Beaconing in a highway scenario: Vulnerable vehicles problem. julkaisussa Proceedings of the 11th Conference of Open Innovations Association FRUCT, FRUCT 2012. Vuosikerta 2012-April. IEEE. 2012. s. 169-175 https://doi.org/10.23919/FRUCT.2012.8253122

Drossos K, Floros A, Giannakoulopoulos A. BEADS: A dataset of Binaural Emotionally Annotated Digital Sounds. julkaisussa Information, Intelligence, Systems and Applications, IISA 2014, The 5th International Conference on. IEEE. 2014. s. 158-163 https://doi.org/10.1109/IISA.2014.6878749

Michele Felicetti A, Ammirato S, Raso C, Aramo-Immonen H, Jussila J. Being a start-upper in Italy: Motivations, obstacles and success factors. julkaisussa Proceedings of the 11th forum on knowledge asset dynamics: Towards a new architecture of knowledge: big data, culture and creativity. Dresden. 2016. s. 1370-1383. 182

Viheriäkoski T, Kohtamäki J, Peltoniemi T, Tamminen P. Benchmarking of Factory Level ESD Control. julkaisussa Electrical Overstress/Electrostatic Discharge Symposium Proceedings 2015. Vuosikerta 2015. USA: IEEE COMPUTER SOC. 2015. 6B.1 https://doi.org/10.1109/EOSESD.2015.7314769

Zakeri FS, Bätz M, Jaschke T, Keinert J, Chuchvara A. Benchmarking of several disparity estimation algorithms for light field processing. julkaisussa Bazeille S, Verrier N, Cudel C, toimittajat, Fourteenth International Conference on Quality Control by Artificial Vision. SPIE, IEEE. 2019. 111721C. (Proceedings of SPIE - The International Society for Optical Engineering). https://doi.org/10.1117/12.2521747

Kekonen A, Bergelin M, Eriksson J-E, Ylänen H, Kielosto S, Viik J. Bioimpedance measurement system for evaluation of the status of wound healing. julkaisussa 2016 15th Biennial Baltic Electronics Conference (BEC) . IEEE. 2016. s. 175-178 https://doi.org/10.1109/BEC.2016.7743757

Naumenko V, Solodovnik V, Totsky A, Zelensky A, Astola J. Bispectrum-based demodulation technique using triple-channel heterodyning of triplet-signal. julkaisussa 2015 Second International Scientific-Practical Conference Problems of Infocommunications Science and Technology (PIC S&T). IEEE. 2015. s. 224-226 https://doi.org/10.1109/INFOCOMMST.2015.7357319

Abramova VV, Kozhemiakin R, Abramov SK, Lukin VV, Zelensky AA, Egiazarian K. Blind estimation of speckle variance in synthetic aperture radar images. julkaisussa 2015 International Conference on Antenna Theory and Techniques: Dedicated to 95 Year Jubilee of Prof. Yakov S. Shifrin, ICATT 2015 - Proceedings. The Institute of Electrical and Electronics Engineers, Inc. 2015 https://doi.org/10.1109/ICATT.2015.7136846

Sorri J, Heljo J, Järventausta P, Honkapuro S, Harsia P. Building Codes and Demand Response of Energy Use. julkaisussa Nenonen S, Junnonen J-M, toimittajat, Proceedings of the CIB World Building Congress 2016: Volume IV: Understanding Impacts and Functioning of Different Solutions. Vuosikerta 4. Tampere University of Technology. Department of Civil Engineering. 2016. s. 8-21

Haverinen-Shaughnessy U, Pekkonen M, Turunen M, Aaltonen A, Leivo V. Building energy retrofits, occupant health and wellbeing. julkaisussa Prins M, Wamelink H, Giddings B, Ku K, Feenstra M, toimittajat, CIB World Building Congress 2016 Proceedings : Volume 2 Environmental Opportunities and challenges - Constructing commitment and acknowledging human experiences. Vuosikerta 2. Tampere University of Technology. Department of Civil Engineering. 2016. s. 679-687

Myllärniemi J, Helander N, Hellsten P, Mahlamäki T, Repo S. Business intelligence approach – a practical tool for competence based curriculum development. julkaisussa EDULEARN17 Proceedings. 9th International Conference on Education and New Learning Technologies: 3-5 July, 2017, Barcelona, Spain. IATED. 2017. s. 6387-6393 https://doi.org/10.21125/edulearn.2017.2451

Hellsten P, Myllärniemi J. Business intelligence process model revisited. julkaisussa Bernardino J, Salgado A, Filipe J, toimittajat, IC3K 2019 - Proceedings of the 11th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management. SCITEPRESS. 2019. s. 341-348. (IC3K 2019 - Proceedings of the 11th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management).

Ranta V, Aarikka-Stenroos L, Mäkinen S. Business models in the circular economy: a structured multiple-case analysis. julkaisussa Proceedings of ISPIM Innovation Summit, Kuala Lumpur, Malaysia. The International Society for Professional Innovation Management (ISPIM): 4-7 December 2016. 2016

Kurvinen A, Sorri J. Bus Transportation Accessibility - Does It Impact Housing Values? julkaisussa Nenonen S, Junnonen J-M, toimittajat, Proceedings of the CIB World Building Congress 2016: Understanding impacts and functioning of different solutions. Vuosikerta IV. Tampere: Tampere University of Technology. Department of Civil Engineering. 2016. s. 321-331

Nenonen S, Eriksson R, Niemi O, Junghans A, Nielsen SB, Lindahl G. Campus retrofitting (CARE) methodology: a way to co-create future learning environments. julkaisussa Proceedings of the 20th CIB World Building Congress 2016: May 30-June 3, 2016, Tampere, Finland. 2016. s. 738-749

Machado MA, Magnier-Watanabe R, Peltola T. Capturing knowledge from research projects: From project reports to storytelling. julkaisussa 2016 Portland International Conference on Management of Engineering and Technology (PICMET). IEEE. 2016. s. 2048-2057 https://doi.org/10.1109/PICMET.2016.7806602

Huttunen H, Shokrollahi Yancheshmeh F, Chen K. Car Type Recognition with Deep Neural Networks. julkaisussa 2016 IEEE Intelligent Vehicles Symposium, IV 2016. IEEE. 2016. s. 1115-1120 https://doi.org/10.1109/IVS.2016.7535529

Matikainen V, Rubio S, Ojala N, Koivuluoto H, Schubert J, Houdková S et al. Cavitation erosion, slurry erosion and solid particle erosion performance of metal matrix composite (MMC) coatings sprayed with modern high velocity thermal spray processes. julkaisussa Materials Science and Technology Conference and Exhibition 2017, MS and T 2017: October 8-12, 2017, Pittsburgh, Pennsylvania USA. Vuosikerta 2. Association for Iron and Steel Technology, AISTECH. 2017. s. 1161-1163

Saarinen E. CBRN Defense Using THz Pulse Trains from Semiconductor Disk Lasers. julkaisussa NATO ARW on THz Diagnostics of CBRN effects and Detection of Explosives & CBRN: Proceedings of the NATO ARW on Detection of Explosives and CBRN. 2015. (NATO Science for Peace and Security Series B: Physics and Biophysics).

Puolitaival T, Forsythe P, Kähkönen K. Challenges Facing BIM Education: Development of Appropriate Teaching and Learning Resources. julkaisussa RICS COBRA AUBEA 2015: The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors . London: Royal Institution of Chartered Surveyors. 2015

Myllärniemi J, Helander N, Pekkola S. Challenges in developing data-based value creation. julkaisussa Bernardino J, Salgado A, Filipe J, toimittajat, IC3K 2019 - Proceedings of the 11th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management. SCITEPRESS. 2019. s. 370-376. (IC3K 2019 - Proceedings of the 11th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management).

Pulkkinen A, Huhtala P, Leino S-P, Anttila JP, Vainio VV. Characterising the industrial context of engineering change management. julkaisussa Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. Springer New York LLC. 2016. s. 618-627. (IFIP Advances in Information and Communication Technology). https://doi.org/10.1007/978-3-319-33111-9_56

Väätäjä H. Characterizing the Context of Use in Mobile Work. julkaisussa Human Work Interaction Design. Work Analysis and Interaction Design Methods for Pervasive and Smart Workplaces: 4th IFIP 13.6 Working Conference, HWID 2015, London, UK, June 25-26, 2015, Revised Selected Papers. Springer Verlag. 2015. s. 97-113. (IFIP Advances in Information and Communication Technology). https://doi.org/10.1007/978-3-319-27048-7_7

Tamminen P, Viheriäkoski T. Charged cable-system ESD event. julkaisussa 2016 38th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD). IEEE. 2016 https://doi.org/10.1109/EOSESD.2016.7592559

Viheriäkoski T, Kärjä E, Hillberg J, Tamminen P. Charge relaxation of slowly dissipative polymers. julkaisussa 2016 38th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD). IEEE. 2016. s. 1-9 https://doi.org/10.1109/EOSESD.2016.7592533

Rizwan M, Rahmat-Samii Y, Ukkonen L. Circularly Polarized Textile Antenna For 2.45 GHz. julkaisussa Circularly Polarized Textile Antenna For 2.45 GHz. IEEE. 2015. s. 51-52 https://doi.org/10.1109/IMWS-BIO.2015.7303755

He H, Chen X, Ukkonen L, Virkki J. Clothing-Integrated Passive RFID Strain Sensor Platform for Body Movement-Based Controlling. julkaisussa 2019 IEEE International Conference on RFID Technology and Applications (RFID-TA). IEEE. 2019. s. 236-239 https://doi.org/10.1109/RFID-TA.2019.8892118

Knyazev S, Tarakanov S, Kuznetsov V, Porozov Y, Koucheryavy Y, Stepanov E. Coarse-grained model of protein interaction for bio-inspired nano-communication. julkaisussa 2014 6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). 2015. s. 260-262 https://doi.org/10.1109/ICUMT.2014.7002112

Jussila J, Kukkamäki J, Helander N. Co-creating digital services for citizens: Activity theory analysis. julkaisussa Bernardino J, Salgado A, Filipe J, toimittajat, IC3K 2019 - Proceedings of the 11th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management. SCITEPRESS. 2019. s. 285-290. (IC3K 2019 - Proceedings of the 11th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management). https://doi.org/10.5220/0008349002850290

Murayama M, Oguro D, Kikuchi H, Huttunen H, Ho YS, Shin J. Color-distribution similarity by information theoretic divergence for color images. julkaisussa 2016 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2016. IEEE. 2017 https://doi.org/10.1109/APSIPA.2016.7820681

Ritola T, Coatanea E. Combining Product Innovation With Service Innovation to Increase Value Created With a System. julkaisussa Proceedings of the ASME international mechanical engineering congress and exposition, 2013, vol 12. AMER SOC MECHANICAL ENGINEERS. 2014

Koivisto K, Forsman J, Ronkainen M, Lahtinen P, Kolisoja P, Kuula P. Commercialising reclaimed materials in earthworks – guidelines for productization and the process of appending these materials in the Finnish national code of practice. julkaisussa Proceedings of the 17th Nordic Geotechnical Meeting Reykjavik Iceland: Challenges in Nordic Geotechnic 25th - 28th of May. Reykjavik: Icelandic Geotechnical Society. 2016

Solomitckii D, Semkin V, Naderpour R, Ometov A, Andreev S. Comparative evaluation of radio propagation properties at 15 GHz and 60 GHz frequencies. julkaisussa 2017 9th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). IEEE. 2017. s. 91-95 https://doi.org/10.1109/ICUMT.2017.8255207

López Baeza J, Cerrone D, Männigo K. Comparing two methods for Urban Complexity calculation using Shannon-Wiener index. julkaisussa Comparing two methods for Urban Complexity calculation using Shannon-Wiener index. WIT Press. 2017. s. 369-378. (WIT Transactions on Ecology and The Environment). https://doi.org/10.2495/SDP170321

Ruusala A, Laukkarinen A, Vinha J. Comparison between calculated and billed building energy consumption values of schools and daycare centers. julkaisussa Černý R, Kočí J, Kočí V, toimittajat, MATEC Web of Conferences: CESBP 2019. Vuosikerta 282. Prague, Czech Republic: EDP Sciences. 2019. 02085

Kallonen A, Nieminen H, Das S, Sallinen R. Comparison of food frequency questionnaire data and shopping records for the assessment of food intake. julkaisussa Proceedings of Seventh International Conference on Well-Being in the Information Society: Fighting Inequalities (WIS 2018). 2018. s. 25-30. (TUCS Lecture Notes).

Schnabel J, Valkealahti S. Compensation of PV generator output power fluctuations with energy storage systems. julkaisussa 31st European Photovoltaic Solar Energy Conference and Exhibition (31st EU PVSEC), 14– 18 September, 2015, Hamburg, Germany. 2015. s. 2177-2181 https://doi.org/10.4229/EUPVSEC20152015-5BV.2.6

Salminen V, Kantola JI, Vanharanta H. Competence portfolio assessment of research and development center for regional development. julkaisussa 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015 . Elsevier. 2015. s. 701-708. (Procedia Manufacturing). https://doi.org/10.1016/j.promfg.2015.07.310

Pyrhönen V-P, Koivisto H. Composite Nonlinear Feedback Control of a Chemical Reactor. julkaisussa Proceedings of AutomaatioXXI, The Industrial Revolution of Internet – From Intelligent Devices to Networked Intelligence. Helsinki, Finland: Suomen Automaatioseura ry. 2015. (SAS julkaisusarja).

Minaev G, Visa A, Piche R. Comprehensive survey of similarity measures for ranked based location fingerprinting algorithm. julkaisussa Indoor Positioning and Indoor Navigation (IPIN), 2017 International Conference on. IEEE. 2017 https://doi.org/10.1109/IPIN.2017.8115922

Katkovnik V, Shevkunov I, Petrov NV, Egiazarian K. Computational wavelength resolution for in-line lensless holography: Phase-coded diffraction patterns and wavefront group-sparsity. julkaisussa Digital Optical Technologies 2017. SPIE. 2017. 1033509. (Proceedings of SPIE). https://doi.org/10.1117/12.2269327

Pyrhönen V-P, Seppälä J, Salmenperä M. Computer-supported collaborative learning: Praxes in new cell-oriented configurable PC-classroom. julkaisussa SEFI conference 2016: Engineering Education on Top of the World: Industry University Cooperation. 2016

Davidson P, Merkulova I. Computer vision aided navigation systems. julkaisussa 23rd Saint Petersburg International Conference on Integrated Navigation Systems, ICINS 2016 - Proceedings. State Research Center of the Russian Federation. 2016. s. 560-562

Keinänen M, Uotila U, Sorri J, Teriö O, Kähkönen K. Consensus building in the pre-design phase of building projects. julkaisussa Prins M, Wamelink H, Giddings B, Ku K, Feenstra M, toimittajat, WBC16 Proceedings of the CIB World Building Congress 2016 Volume II : Environmental Opportunties and challenges, Constructing commitment and acknowledging human experiences. Vuosikerta Volume II . Tampere University of Technology. Department of Civil Engineering. 2016. s. 561-572. (Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics.).

Ortombina L, Liegmann E, Karamanakos P, Tinazzi F, Zigliotto M, Kennel R. Constrained Long-Horizon Direct Model Predictive Control for Synchronous Reluctance Motor Drives. julkaisussa 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018. IEEE. 2018. 8460173 https://doi.org/10.1109/COMPEL.2018.8460173

Vaittinen E, Nenonen S. Consumer acceptance in new service innovation: Enhancing consumer durables with new product-related services. julkaisussa Proceedings of the 22nd Innovation Product Development Management Conference (IPDMC) . 2015. (International Product Development Management Conference).

Perttola H, Ronni H, Heinisuo M. Contact analysis included in a 3D FEA of tube splices. julkaisussa Eurosteel 2014 7th European conference on steel and composite structures. 2014

Rautiainen A, Lummi K, Järventausta P, Tikka V, Lana A. Control of Electric Vehicle Charging in Domestic Real Estates as Part of Demand Response Functionality. julkaisussa Cired Workshop 2016. 2016. 0240

Cakir E, Virtanen T. Convolutional Recurrent Neural Networks for Rare Sound Event Detection. julkaisussa Proceedings of the Detection and Classification of Acoustic Scenes and Events 2017 Workshop (DCASE2017). Tampere University of Technology. Laboratory of Signal Processing. 2017. s. 27-31

Helander N, Vesalainen J, Juha P. Coopetition and company performance. julkaisussa IMP 2015 Conference. 2015

Brechet N, Ginestet G, Moradi E, Ukkonen L, Torres J, Björninen T et al. Cost- and time-effective sewing patterns for embroidered passive UHF RFID tags. julkaisussa Proceedings of IEEE 2017 International Workshop on Antenna Technology. IEEE. 2017. s. 30-33 https://doi.org/10.1109/IWAT.2017.7915289

Jarusriboonchai P, Olsson T, Prabhu V, Väänänen-Vainio-Mattila K. CueSense: a Wearable Proximity-Aware Display Enhancing Encounters. julkaisussa CHI EA '15 Proceedings of the 33rd Annual ACM Conference Extended Abstracts on Human Factors in Computing Systems . ACM. 2015 https://doi.org/10.1145/2702613.2732833

Jaakkola H, Thalheim B. Culture-Aware Web Information System Development. julkaisussa Welzer T, Hölbl M, Kiyoki Y, Thalheim B, Jaakkola H, toimittajat, 25th International Conference on Information Modelling and Knowledge Bases EJC 2015 June 9-12, 2015, Maribor, Slovenia. Maribor: University of Maribor, Faculty of Electrical Engineering and Computer Science. 2015. s. 121-138

Jaakkola H, Thalheim B. Culture-Aware Web Information Systems in Dependence of Context. julkaisussa Sornlertlamvanich V, Chawakitchareon P, Hansuebsai A, Koopipat C, Kiyoki Y, Jaakkola H, Thalheim B, Yoshida N, toimittajat, The Proceedings of the 27th International Conference on Information Modelling and Knowledge Bases. Sirindhorn International Institute of Technology, Thammasat University, Thailand. 2017. s. 309-331

Stormi K, Laine T, Suomala P. Customer lifetime value in manufacturing services. julkaisussa Proceedings of the Manufacturing Accounting Research Conference 2016: Lisbon, Portugal, June 15-17, 2016. Belgium: European Institute for Advanced Studies in Management EIASM. 2016

Helander N, Sillanpää V, Vuori V, Uusitalo O. Customer Perceived Value - A Key in Marketing of Integrated Solutions. julkaisussa Kavoura A, Sakas D, Tomaras P, toimittajat, The 5th International Conference on Strategic Innovative Marketing., At Athens, Greece, Volume: 5: September 23-26, 2016. Springer. 2017. s. 37-42. (Springer Proceedings in Business and Economics). https://doi.org/10.1007/978-3-319-56288-9_6

Vanharanta H, Kantola J, Seikola S. Customers’ conscious experience in a coffee shop. julkaisussa 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015 . Elsevier. 2015. s. 618-625. (Procedia Manufacturing). https://doi.org/10.1016/j.promfg.2015.07.283

Ala-Maakala M, Liimatainen H. Customer value management framework for supply chains. julkaisussa Pawar K, toimittaja, The proceedings of 21st international symposium on logistics (ISL 2016): Sustainable transport and supply chain innovation, Kaohsiung, Taiwan 3-6 July 2016. 2016. s. 447-456

Devos M, Ometov A, Mäkitalo N, Aaltonen T, Andreev S, Koucheryavy Y. D2D communications for mobile devices: Technology overview and prototype implementation. julkaisussa 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). IEEE. 2016. s. 124-129 https://doi.org/10.1109/ICUMT.2016.7765344

Väyrynen T, Peltokangas S, Anttila E, Vilkko M. Data-Driven Approach for Analysis of Performance Indices in Mobile Work Machines. julkaisussa Klemas T, Chan S, toimittajat, DATA ANALYTICS 2015, The Fourth International Conference on Data Analytics. 2015. s. 81-86

Valenti M, Diment A, Parascandolo G, Squartini S, Virtanen T. DCASE 2016 Acoustic Scene Classification Using Convolutional Neural Networks. julkaisussa Proceedings of the Detection and Classification of Acoustic Scenes and Events 2016 Workshop (DCASE2016). Tampere University of Technology. Department of Signal Processing. 2016

Martinsuo M, Arvio I. Decision making on sustainability in product development projects. julkaisussa 15th Annual Conference of EURAM European Academy of Management: EURAM 2015. Warsaw: European Academy of Management, EURAM. 2015

Huuhka S. Demolished buildings: Empirical evidence on types, ages and construction materials. julkaisussa Hajek P, Tywoniak J, Lupisek A, Sojkova K, toimittajat, CESB16 - Central Europe towards Sustainable Building 2016: Innovations for Sustainable Future, June 22-24, 2016, Prague. Prague: Czech Technical University in Prague. 2016. s. 1105-1112

Huuhka S. Demolition Rates of Buildings with Different Functions and Construction Materials. julkaisussa Zelezna J, Hajek P, Tywoniak J, Lupisek A, Sojkova K, toimittajat, YRSB16 - iiSBE Forum of Young Researchers in Sustainable Building 2016: Innovations for Sustainable Future June 21, 2016, Prague. Prague: Czech Technical University in Prague. 2016. s. 301-307

Mäki A-J, Kontunen A, Ryynänen T, Verho J, Kreutzer J, Lekkala J et al. Design and simulation of a thermal flow sensor for gravity-driven microfluidic applications. julkaisussa IEEE 11th Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS). IEEE. 2016. s. 125-129 https://doi.org/10.1109/NEMS.2016.7758214

Joutsenlahti J, Ali-Löytty S, Pohjolainen S. Developing Learning and Teaching in Engineering Mathematics with and without Technology. julkaisussa SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation. European Society for Engineering Education SEFI. 2016

Sislian R, Da Silva FV, Gedraite R, Jokinen H, An DKR. Development of a Low-Cost Fuzzy Gain Schedule Neutralization Control System. julkaisussa WCECS 2015 - World Congress on Engineering and Computer Science 2015. Vuosikerta II. Newswood Limited. 2015. s. 575-578. (Lecture Notes in Engineering and Computer Science).

Fang CY, Vallini F, Amili AE, Tukiainen A, Lyytikäinen J, Guina M et al. Development of efficient electrically pumped nanolasers based on InAlGaAs tunnel junction. julkaisussa CLEO: Science and Innovations, CLEO_SI 2018. OSA - The Optical Society. 2018 https://doi.org/10.1364/CLEO_SI.2018.SW4Q.4

Salmisto A, Keinänen M, Kähkönen K. Development of students’ multidisciplinary collaboration skills by simulation of the design process. julkaisussa Proceedings of the CIB World Building Congress 2016: Volume I - Creating built environments of new opportunities.. Vuosikerta 1. 2016. s. 348-360

Hokka M, Mirow N, Nagel H, Vogt S, Kuokkala V-T. DIC measurements of the human heart during cardiopulmonary bypass surgery. julkaisussa Conference Proceedings of the Society for Experimental Mechanics Series. Vuosikerta 6. Springer New York LLC. 2016. s. 51-59 https://doi.org/10.1007/978-3-319-21455-9_6

Uusitalo T, Virtanen H, Viheriälä J, Salmi J, Aho AT, Dumitrescu M. Difference frequency modulation of multi-section dual-mode lasers with nanoscale surface gratings. julkaisussa Belyanin AA, Smowton PM, toimittajat, SPIE Proceedings: Novel In-Plane Semiconductor Lasers XV. Vuosikerta 9767. SPIE. 2016. 97670S . (Proceedings of SPIE). https://doi.org/10.1117/12.2213888

Kärkkäinen H, Silventoinen A. Different approaches of the PLM maturity concept and their use domains –analysis of the state of the art. julkaisussa Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. Springer New York LLC. 2016. s. 89-102. (IFIP Advances in Information and Communication Technology). https://doi.org/10.1007/978-3-319-33111-9_9

Pannian JC, Alberucci A, Boardman A, Assanto G. Diffraction compensation of finite beams in hyperbolic metamaterials. julkaisussa Laser science 2016. Optical Society of America (OSA). 2016. JW4A.10

Soltani A, Curtze S, Lahti J, Järvelä K, Laurikka J, Hokka M et al. Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery. julkaisussa Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vuosikerta 4. Springer New York LLC. 2018. s. 19-27. (Conference Proceedings of the Society for Experimental Mechanics). https://doi.org/10.1007/978-3-319-63552-1_4

Karimi N, Kunwar P, Toivonen J. Direct Laser Writing of Fluorescent Silver Nanoclusters in Polyvinyl Alcohol Films. julkaisussa Frontiers in Optics 2015: Proceedings. 2015. FTu5E.4 https://doi.org/10.1364/FIO.2015.FTu5E.4

Narhi M, Wetzel B, Billet C, Merolla J-M, Toenger S, Sylvestre T et al. Direct Measurement of Temporal Rogue Waves Generated by Spontaneous Modulation Instability. julkaisussa Frontiers in Optics 2016. Optical Society of America. 2016. FTu3I.4

Vuori V, Bor S, Polsa P, Käpylä J, Helander N. Discovering collaborative and inclusive solutions to co-create multidimensional value in cross-sector collaboration. julkaisussa Proceedings of the 11th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management: 17-19 September, 2019, Vienna, Austria. SCITEPRESS. 2019. s. 364-369. (IC3K 2019 - Proceedings of the 11th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management).

Ritala P, Aarikka-Stenroos L. Disruptive innovation in ecosystems: Path-creation and institutional barriers. julkaisussa XXVI ISPIM Conference: Porto, Portugal (2016) Blending Tomorrow’s Innovation Vintage.: The International Society for Professional Innovation Management, Jun. 2016. Manchester: International Society for Professional Innovation Management ISPIM. 2016. s. 1-16

Kriesi C, Steinert M, Aalto-Setälä L, Anvik A, Balters S, Baracchi A et al. Distributed Experiments in Design Sciences, a Next Step in Design Observation Studies? julkaisussa Weber C, Husung S, Cantamessa M, Cascini G, Marjanovic D, Venkataraman S, toimittajat, DS 80-2 Proceedings of the 20th International Conference on Engineering Design (ICED 15) Vol 2: Design Theory and Research Methodology Design Processes. DESIGN SOC. 2015. (International Conference on Engineering Design).

Aarikka-Stenroos L, Talvitie M. Distributors As Market Orientation Agents in Innovation Development and Commercialization. julkaisussa The Proceedings of the XXVI ISPIM Conference 2015 Budapest, Hungary . Denmark: International Society for Professional Innovation Management ISPIM. 2015

Jussila J, Aramo-Immonen H, Rouvari O, Porkka P, Ammirato S. Does Strategic and Innovative Fit Indicate Smart Social Media use in a Company? julkaisussa Proceedings of the 11th International Forum on Knowledge Asset Dynamics: Towards a New Architecture of Knowledge: Big Data, Culture and Creativity, Dresden -Germany 15-17 June 2016. Dresden. 2016. s. 1973-1983. 249

Isotalo TJ, Niemi T. Dots-on-the-fly electron beam lithography. julkaisussa Bencher C, toimittaja, SPIE Proceedings: Alternative Lithographic Technologies VIII. Vuosikerta 9777. SPIE. 2016. 97771E. (Proceedings of SPIE). https://doi.org/10.1117/12.2219136

Kahle H, Phung H-M, Penttinen J-P, Rajala P, Tukiainen A, Ranta S et al. Double-side pumped membrane external-cavity surface-emitting laser (MECSEL) with increased efficiency emitting > 3 W in the 780 nm region. julkaisussa 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings. IEEE. 2019 https://doi.org/10.23919/CLEO.2019.8749958

Bolla P, Lohan E-S. Dual-frequency signal processing architecture for robust and precise positioning applications. julkaisussa 2018 IEEE/ION Position, Location and Navigation Symposium, PLANS 2018. IEEE. 2018. s. 72-80 https://doi.org/10.1109/PLANS.2018.8373367

Paloniitty M. Durability study on high speed water hydraulic miniature on/off-valve. julkaisussa DFP16, Proceedings of the eighth workshop on digital fluid power, May 24-25, 2016, Tampere, Finland. Tampere. 2016. s. 201-211

Jokipii J, Suntio T. Dynamic characteristics of three-phase Z-source-based photovoltaic inverter with asymmetric impedance network. julkaisussa 9th International Confernce on Power Electronics ECCE Asia (ICPE-ECCE Asia). IEEE. 2015. s. 1976-1983 https://doi.org/10.1109/ICPE.2015.7168049

Stoykova E, Nazarova D, Berberova N, Gotchev A, Ivanov B, Mateev G. Dynamic laser speckle metrology with binarization of speckle patterns. julkaisussa 19th International Conference and School on Quantum Electronics: Laser Physics and Applications. SPIE. 2017. 102260R. (Proceedings of SPIE). https://doi.org/10.1117/12.2262330

Tiitola V, Korhonen T, Laine T, Lyly-Yrjänäinen J. Dynamics of value in technology inspired value co-creation: Case in homecare value network. julkaisussa 14th IFKAD 2019 Proceedings: 5-7 June 2019, Matera, Italy. IKAM Centro Studi & Ricerche. 2019. (PROCEEDINGS IFKAD).

Mela K, Heinisuo M. Economical utilization of high strength steel: Welded slim floor box beams. julkaisussa Eurosteel 2014 7th European conference on steel and composite structures. 2014

Partanen T, Niemelä P, Mannila L, Poranen T. Educating Computer Science Educators Online - A Racket MOOC for Elementary Math Teachers of Finland. julkaisussa Proceedings of the 9th International Conference on Computer Supported Education. SCITEPRESS - Science and Technology Publications. 2017. s. 47-58 https://doi.org/10.5220/0006257800470058

Niemelä P, Di Flora C, Helevirta M, Isomöttönen V. Educating future coders with a holistic ICT curriculum and new learning solutions. julkaisussa 7th International Multi-Conference on Complexity, Informatics and Cybernetics, IMCIC 2016 and 7th International Conference on Society and Information Technologies, ICSIT 2016. Vuosikerta 2. IIIS. 2016. s. 132-136

Kuula P, Leppänen M, Kolisoja P, Korkiala-Tanttu L, Sorvari J, Gustavsson H. Education on the utilization of secondary materials in earthworks. julkaisussa Lahtinen P, Raasakka V, toimittajat, Proceedings of the 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials: No Gradle no Grave Circular Economy into practice. RIL - Finnish Association of Civil Engineers. 2018. s. 177-187

Aapro A, Messo T, Suntio T. Effect of active damping on the output impedance of PV inverter. julkaisussa IEEE 16th Workshop on Control and Modeling for Power Electronics (COMPEL). 2015 https://doi.org/10.1109/COMPEL.2015.7236463

Suokas E. Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating. julkaisussa 16th TAPPI European PLACE Conference 2017. TAPPI Press. 2017. s. 529-544

Viinamäki J, Jokipii J, Suntio T. Effect of Inductor Saturation on the Harmonic Currents of Grid-Connected Three-Phase VSI in PV Application. julkaisussa 2015 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), 1-5 June 2015, Seoul. IEEE. 2015. s. 1209-1216 https://doi.org/10.1109/ICPE.2015.7167934

Vazquez Fernandez N, Isakov M, Hokka M, Kuokkala VT. Effects of adiabatic heating estimated from tensile tests with continuous heating. julkaisussa Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vuosikerta 1. Springer New York LLC. 2018. s. 1-7. (Conference Proceedings of the Society for Experimental Mechanics). https://doi.org/10.1007/978-3-319-62956-8_1

Mardoukhi A, Hokka M, Kuokkala V-T. Effects of surface cracks and strain rate on the tensile behavior of Balmoral Red granite. julkaisussa 11th International Conference on the Mechanical and Physical Behaviour of Materials Under Dynamic Loading. EDP Sciences. 2015. 02007

Koskinen JA. E-learning of ethics, awareness, hacking and research by information security majors. julkaisussa Proceedings of SEFI Annual Conferences. European Society for Engineering Education SEFI. 2015

Lummi K, Rautiainen A, Järventausta P, Heine P, Lehtinen J, Hyvärinen M. Electricity Distribution Network Tariffs - Present Practices, Future Challenges and Development Possibilities. julkaisussa CIRED Workshop 2016. 2016

Laine K, Sipilä E, Anderson M, Sydänheimo L. Electronic Exam in Electronics Studies. julkaisussa SEFI Annual Conference 2016: Engineering Education on Top of the Wolrd: Industry University Cooperation. 2016

Viheriäkoski T, Kärjä E, Gärtner R, Tamminen P. Electrostatic discharge characteristics of conductive polymers. julkaisussa Electrical Overstress/Electrostatic Discharge Symposium Proceedings 2017, EOS/ESD 2017. ESD Association. 2017

Viheriäkoski T, Kokkonen M, Tamminen P, Karja E, Hillberg J, Smallwood J. Electrostatic Threats in Hospital Environment. julkaisussa 2014 36TH Electrical overstress/electrostatic discharge symposium (EOS/ESD). IEEE COMPUTER SOC. 2014. (Electrical Overstress Electrostatic Discharge Symposium).

Niemelä P, Valmari A. Elementary math to close the digital skills gap. julkaisussa CSEDU 2018 - Proceedings of the 10th International Conference on Computer Supported Education. Vuosikerta 2. SCITEPRESS. 2018. s. 154-165 https://doi.org/10.5220/0006800201540165

Virkki J, Chen X, Björninen T, Ukkonen L. Embroidered antennas and antenna-electronics interfaces for wearable RFID tags. julkaisussa IMWS-AMP 2017 International Microwave Workshop Series on Advanced Materials and Processes. IEEE. 2017 https://doi.org/10.1109/IMWS-AMP.2017.8247437

Andersson T, Boedeker M, Vuori V. Emotion-Gauge: Analyzing affective experiences in B2B customer journeys. julkaisussa Kavoura A, Sakas D, Tomaras P, toimittajat, Strategic Innovative Marketing : 5th IC-SIM, Athens, Greece, September 23-26, 2016. Springer. 2017. s. 31-36. (Springer Proceedings in Business and Economics).

Juuti T, Pakkanen J, Lehtonen T. Empirical study of good, bad and ugly modular engineering solutions in machinery manufacturing industry. julkaisussa Proceedings of the Design Society: International Conference on Engineering Design: The 22nd International Conference on Engineering Design, ICED19, Delft, The Netherlands, 5-8 August 2019. Cambridge University Press. 2019. s. 2981-2990. (Proceedings of the Design Society: International Conference on Engineering Design ). https://doi.org/10.1017/dsi.2019.305

Viita J, Junnonen J-M. Empowerment in construction: a qualitative analysis of subcontractors' quality assurance. julkaisussa Proceedings of the CIB World Building Congress 2016: Volume II - Environmental Opportunies and Challenges. Constructing Commitment and Acknowledging Human Experiences. Tampere University of Technology. Department of Civil Engineering. 2016. s. 436-448

Helander N, Okkonen J, Vuori V, Paavilainen N, Kujala J. Enablers and Restraints of Knowledge Work – Does profession make a difference? julkaisussa Towards a new architecture of knowledge : Big Data, culture and creativity: IFKAD 2016-11th International Forum on Knowledge Asset Dynamics, Dresden 15-17.6.2016, Germany. 2016. s. 40-52

Silverajan B, Vistiaho P. Enabling cybersecurity incident reporting and coordinated handling for maritime sector. julkaisussa 2019 14th Asia Joint Conference on Information Security, AsiaJCIS 2019. IEEE. 2019. s. 88-95 https://doi.org/10.1109/AsiaJCIS.2019.000-1

Ikkala K, Lanz M, Kiviö J, Coatanéa E. Energy efficiency evaluation method for machine tools. julkaisussa Flexible Automation and Intelligent Manufacturing 2015. The Choir Press. 2015. s. 58-65

Laine T, Suomala P, Saukkonen N. Engaging facts and feelings in management accounting practices. julkaisussa IFKAD 2015 : 10th International Forum on Knowledge Asset Dynamics, Bari, Italy, June 10th-12th. Italy: Institute of Knowledge Asset Management & Arts for Business Institute. 2015. (International forum on knowledge asset dynamics).

Pyrhönen V-P. Enhancing old laboratory experiment using flipped learning: Towards self-regulating collaborative groups in blended learning environment. julkaisussa SEFI conference 2016: Engineering Education on Top of the World: Industry University Cooperation. 2016

Vaittinen E, Martinsuo M, Nenonen S. Enhancing the acceptance of advanced services among users of complex systems. julkaisussa Baines T, Harrison D, Zolkiewski J, toimittajat, Servitization: Shift, Transform, Grow: Proceedings of the Spring Servitization Conference, 16-17 May 2016 (SSC2016). 2016. s. 162-170

Tamminen P, Viheriäkoski T, Ukkonen L, Sydänheimo L. ESD and Disturbance Cases in Electrostatic Protected Areas. julkaisussa Electrical Overstress / Electrostatic Discharge Symposium Proceedings 2015. Vuosikerta 2015. USA: IEEE COMPUTER SOC. 2015. 5B.2 https://doi.org/10.1109/EOSESD.2015.7314792

Tamminen P, Sydänheimo L, Ukkonen L. ESD Sensitivity of 01005 Chip Resistors and Capacitors. julkaisussa 2014 36TH Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD). IEEE COMPUTER SOC. 2014. (Electrical Overstress Electrostatic Discharge Symposium).

Einolander J. Evaluating organizational commitment in support of organizational leadership. julkaisussa 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015. Elsevier. 2015. s. 668–673. (Procedia Manufacturing). https://doi.org/10.1016/j.promfg.2015.07.300

Raunio J-P, Makela I, Mäntylä M, Ritala R. Evaluating the contrast of planar periodic patterns on paper. julkaisussa Paper Conference and Trade Show, PaperCon 2018. TAPPI Press. 2018. s. 294-302

Mendes MR, Subramaniyam NP, Wendel-Mitoraj K. Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes. julkaisussa International IEEE/EMBS Conference on Neural Engineering, NER. Vuosikerta 2015-July. IEEE COMPUTER SOCIETY PRESS. 2015. s. 1092-1095 https://doi.org/10.1109/NER.2015.7146818

Kart U, Kämäräinen JK, Fan L, Gabbouj M. Evaluation of visual object trackers on equirectangular panorama. julkaisussa VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications . Vuosikerta 5. SCITEPRESS. 2018. s. 25-32 https://doi.org/10.5220/0006526200250032

Holopainen S. Evolution equations based approach for modeling of fatigue in amorphous glassy polymers. On the investigation of fatigue damage development in polycarbonate. julkaisussa Papadrakakis M, Papadopoulos V, Stefanou G, Plevris V, toimittajat, Proc. of VII European Congress on Computational Methods in Applied Sciences and Engineering , ECCOMAS Congress 2016. : M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) . Crete Island, Greece, 5 – 10 June 2016. 2016. s. 6675-6687 https://doi.org/10.7712/100016.2289.11047

Mäkitalo-Keinonen T, Aarikka-Stenroos L. Examining Innovation Barriers along Innovation Process in Multi-Industry Hygiene-Technology Network. julkaisussa The Proceedings of the XXVI ISPIM Conference 2015 Budapest, Hungary . Denmark: International Society for Professional Innovation Management ISPIM. 2015

Kelo T, Eronen J. Experiences from development of security audit criteria. julkaisussa Proceedings of the 16th European Conference on Cyber Warfare and Security, ECCWS 2017. TAPPI Press; Curran Associates, Inc. 2017. s. 208-215

Naumenko VV, Solodovnik VF, Totsky AV, Zelensky AA, Astola JT. Experimental study of bispectrum-based encoding in radio communication system. julkaisussa 2015 International Conference on Antenna Theory and Techniques: Dedicated to 95 Year Jubilee of Prof. Yakov S. Shifrin, ICATT 2015 - Proceedings. The Institute of Electrical and Electronics Engineers, Inc. 2015 https://doi.org/10.1109/ICATT.2015.7136853

Tosi D, Lenarduzzi V, Morasca S, Taibi D. Experimenting traditional and modern reliability models in a 3-years european software project. julkaisussa Proceedings of the 11th European Conference on Information Systems Management, ECISM 2017. Academic Conferences and Publishing International Limited. 2017. s. 304-314

Chaudhary S, Zhao Y, Berki E, Valtanen J, Li L, Helenius M et al. Exploring Attitudes, Knowledge and Competencies for Security Technology: A Cross-Cultural Survey in Higher Education. julkaisussa 8th International Conference on ICT, Society and Human Beings 2015. 2015. s. 11-18

Mäkinen SJ, Dedehayir O, Ortt R. Exploring effects of ecosystem clockspeed on product performance. julkaisussa IEEE International Conference on Industrial Engineering and Engineering Management. Vuosikerta 2015-January. IEEE COMPUTER SOCIETY PRESS. 2015. s. 1457-1461. 7058880 https://doi.org/10.1109/IEEM.2014.7058880

Saari UA, Mäkinen SJ. Exploring how brand experience measurement could be used for integrating marketing and R&D. julkaisussa XXVII ISPIM Innovation Conference 2016: Porto, 19-22 June, 2016. 2016

Hynynen A. Extending Professional Fields. Architectural Research and Regional Development. julkaisussa Kähkönen K, Keinänen M, toimittajat, Proceedings of the CIB World Building Congress 2016.: Volume I - Creating built environments of new opportunities. Vuosikerta I. Tampere University of Technology. Department of Civil Engineering. 2016. s. 372-383

Närhi M, Genty G, Steinmeyer G, Sand J, Orsila L. Extreme Nonlinear Signal Amplification. julkaisussa 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference. OSA. 2015

Niu L, Suominen O, M. Aref M, Mattila J, Ruiz E, Esque S. Eye-in-Hand Manipulation for Remote Handling: Experimental Setup. julkaisussa International Conference on Robotics and Mechantronics : (ICRoM 2017). Vuosikerta 320. IOP Publishing Ltd. 2018. 012007. (IOP conference series : materials science and engineering). https://doi.org/10.1088/1757-899X/320/1/012007

Perttula A. Eye tracking studies focusing on mathematics: a literature review. julkaisussa INTED2017. The 11th annual International Technology, Education and Development Conference: Valencia, 6th - 8th of March, 2017.. IATED Academy. 2017. 2166-2173 https://doi.org/10.21125/inted.2017.0639

Zia N, Viheriälä J, Koskinen R, Koskinen M, Suomalainen S, Guina M. Fabrication and characterization of broadband superluminescent diodes for 2 μm wavelength. julkaisussa Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XX. SPIE. 2016. 97680Q. (Proceedings of SPIE). https://doi.org/10.1117/12.2209720

Chen X, He H, Ukkonen L, Virkki J, Xu J, Wang T et al. Fabrication and Practical Evaluation of Glove-integrated Passive UHF RFID Tags. julkaisussa 2018 IEEE International Conference on RFID Technology Application (RFID-TA). IEEE. 2018 https://doi.org/10.1109/RFID-TA.2018.8552814

Chen X, He H, Ukkonen L, Virkki J, Lu Y, Lam H. Fabrication and reliability evaluation of passive UHF RFID T-shirts. julkaisussa 2018 IEEE International Workshop on Antenna Technology, iWAT2018 - Proceedings. IEEE. 2018. s. 1-4 https://doi.org/10.1109/IWAT.2018.8379146

Sharifzadeh S, Tata J, Tan B. Farm detection based on deep convolutional neural nets and semi-supervised green texture detection using VIS-NIR satellite image. julkaisussa Hammoudi S, Quix C, Bernardino J, toimittajat, DATA 2019 - Proceedings of the 8th International Conference on Data Science, Technology and Applications. SCITEPRESS. 2019. s. 100-108 https://doi.org/10.5220/0007954901000108

Siivonen L, Linjama M, Huova M, Försterling H, Stamm E, Deubel T. Fault Tolerance of Digital Hydraulics in High Dynamic Hydraulic System. julkaisussa The Fourteenth Scandinavian International Conference on Fluid Power. 1 toim. Vuosikerta 1. Tampere, Finland. 2015

Ometov A, Masek P, Malina L, Florea R, Hosek J, Andreev S et al. Feasibility characterization of cryptographic primitives for constrained (wearable) IoT devices. julkaisussa 2016 IEEE International Conference on Pervasive Computing and Communication Workshops, PerCom Workshops 2016. IEEE. 2016 https://doi.org/10.1109/PERCOMW.2016.7457161

Petrov V. Feasibility study of the THz band for communications between wearable electronics. julkaisussa 2015 17th Conference of Open Innovations Association (FRUCT), 20-24 April 2015, Yaroslavl. . IEEE. 2015. s. 157-162. (Conference of Open Innovations Association (FRUCT)). https://doi.org/10.1109/FRUCT.2015.7117987

Tamminen P, Viheriäkoski T, Reinvuo T, Sydänheimo L, Ukkonen L. Field Collapse Event ESD Test Method. julkaisussa 2014 36TH Electrical overstress/electrostatic discharge symposium (EOS/ESD). IEEE COMPUTER SOC. 2014. (Electrical Overstress Electrostatic Discharge Symposium).

Takala A, Korhonen-Yrjänheikki K. Finnish Engineering Education for Sustainable Development in 2016 - Call for collaborative learning. julkaisussa SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation. European Society for Engineering Education SEFI. 2016

Lietzen J, Kylliäinen M. Finnish Round Robin Test on Airborne Sound Insulation. julkaisussa Proceedings of the 11th European Congress and Exposition on Noise Control Engineering, Euronoise 2018, May 27-31 2018, Hersonissos, Crete, Greece: Reduce Noise to Improve Life. Hersonissos, Crete, Greece: European Acoustic Association EAA. 2018. s. 1677-1682. 282.162. (European Congress and Exposition on Noise Control Engineering).

Abdallah Z, Stefszky M, Ulvila V, Silberhorn C, Vainio M. Frequency Comb Generation in a Continuous-Wave Pumped Second-Order Nonlinear Waveguide Resonator. julkaisussa 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings. IEEE. 2019 https://doi.org/10.23919/CLEO.2019.8750403

Kantola E, Penttinen J-P, Leinonen T, Ranta S, Guina M. Frequency-doubled VECSEL employing a Volume Bragg Grating for linewidth narrowing. julkaisussa CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018 https://doi.org/10.1364/CLEO_AT.2018.JTu2A.17

Kantola E, Leinonen T, Rantamäki A, Guina M, Sirbu A, Iakovlev V. Frequency-doubled wafer-fused 638 nm VECSEL with an output power of 5.6 W. julkaisussa CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018 https://doi.org/10.1364/CLEO_AT.2018.JTu2A.10

Taibi D, Systä K. From monolithic systems to microservices: A decomposition framework based on process mining. julkaisussa Ferguson D, Munoz VM, Helfert M, Pahl C, toimittajat, CLOSER 2019 - Proceedings of the 9th International Conference on Cloud Computing and Services Science. SCITEPRESS. 2019. s. 153-164 https://doi.org/10.5220/0007755901530164

Kiili K. From theories to game mechanics: Developing a game for training rational numbers. julkaisussa Proceedings of the 11th European Conference on Games Based Learning, ECGBL 2017. Academic Conferences and Publishing International Limited. 2017. s. 328-334

Smith J, Kuokkala V-T, Seidt J, Gilat A. Full-Field Temperature and Strain Measurement in Dynamic Tension Tests on SS 304. julkaisussa Dynamic Behavior of Materials, Volume 1: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Springer International Publishing. 2016. s. 37-44. (Conference proceedings of the Society for Experimental Mechanics). https://doi.org/10.1007/978-3-319-41132-3_6

Pluduma L, Freimanis E, Gross K, Koivuluoto H, Algate K, Haynes D et al. Functionalizing Surface Electrical Potential of Hydroxyapatite Coatings. julkaisussa 11th International Conference Medical Applications of Novel Biomaterials and Nanotechnology. Vuosikerta 102. 2016. s. 12-17. (Advances in Science and Technology).

Backas J, Ghabcheloo R, Huhtala K. Gain Scheduling Full State Feedback with D-Implementation for Velocity Tracking of Hydrostatic Drive Transmission. julkaisussa Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation. 2015. s. 64-75

Perttula A, Tuomi P. Gamification at School. julkaisussa EDULEARN17: The 9th International Conference on Education and New Learning Technologies. 2017. s. 9334-9340 https://doi.org/10.21125/edulearn.2017.0756

Eriksson S-L, Orelma H, Vuojamo V. Generalized hyperbolic harmonic functions in the plane. julkaisussa Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2014 (ICNAAM-2014). Vuosikerta 1648. American Institute of Physics Inc. 2015. 440007 https://doi.org/10.1063/1.4912658

Messo T, Aapro A, Suntio T. Generalized multivariable small-signal model of three-phase grid-connected inverter in DQ-domain. julkaisussa IEEE 16th Workshop on Control and Modeling for Power Electronics (COMPEL). IEEE. 2015 https://doi.org/10.1109/COMPEL.2015.7236460

Stankovic RS, Astola J, Moraga C. Gibbs Dyadic Differentiation on Groups - Evolution of the Concept. julkaisussa Computer Aided Systems Theory – EUROCAST 2017 - 16th International Conference, Revised Selected Papers. Springer Verlag. 2018. s. 229-237. (Lecture Notes in Computer Science). https://doi.org/10.1007/978-3-319-74727-9_27

Ahmed S, Musfequr Rehman SM, Ukkonen L, Björninen T. Glove-integrated slotted patch antenna for wearable UHF RFID reader. julkaisussa 2018 IEEE International Conference on RFID Technology & Application (RFID-TA). IEEE. 2018 https://doi.org/10.1109/RFID-TA.2018.8552817

Ahmed S, Mehmood A, Sydänheimo L, Ukkonen L, Björninen T. Glove-Integrated Textile Antenna with Reduced SAR for Wearable UHF RFID Reader. julkaisussa 2019 IEEE International Conference on RFID Technology and Applications (RFID-TA). IEEE. 2019. s. 231-235 https://doi.org/10.1109/RFID-TA.2019.8892251

Christophe F, Wang M, Coatanea E, Zeng Y, Bernard A. Grammatical and Semantic Disambiguation of Requirements at Elicitation and Representation Stages. julkaisussa Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering, 2011, vol 9. AMER SOC MECHANICAL ENGINEERS. 2012. s. 17-31

Ledentsov NN, Shchukin VA, Lyytikäinen J, Okhotnikov O, Cherkashin NA, Shernyakov YM et al. Green (In,Ga,Al)P-GaP light-emitting diodes grown on high-index GaAs surfaces. julkaisussa Proceedings of SPIE: Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XIX. Vuosikerta 9383. SPIE. 2015. 93830E https://doi.org/10.1117/12.2083953

Leinonen T, Penttinen JP, Korpijärvi VM, Kantola E, Guina M. >8W GaInNAs VECSEL emitting at 615 nm. julkaisussa Proceedings of SPIE: Vertical External Cavity Surface Emitting Lasers (VECSELs) V. Vuosikerta 9349. SPIE. 2015. 934909 https://doi.org/10.1117/12.2079162

Järvenpää E, Lanz M. Guidelines for Designing Human-friendly User Interfaces for Factory Floor Manufacturing Operators. julkaisussa Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015, Proceedings, Part II. Springer International Publishing. 2015. s. 531-538. (IFIP Advances in Information and Communication Technology). https://doi.org/10.1007/978-3-319-22759-7_61

Komar M, Edelev S, Koucheryavy Y. Handheld wireless authentication key and secure documents storage for the Internet of Everything. julkaisussa Proceedings of the 18th Conference of Open Innovations Association FRUCT and Seminar on Information Security and Protection of Information Technolog, FRUCT-ISPIT 2016. IEEE COMPUTER SOCIETY PRESS. 2016. s. 120-130 https://doi.org/10.1109/FRUCT-ISPIT.2016.7561517

Kulmala A, Repo S. Handling exceptional situations in a distribution network congestion management algorithm. julkaisussa CIRED Workshop 2016. Helsinki, Finland. 2016 https://doi.org/10.1049/cp.2016.0663

Roncero-Sanchez P, Acha E. Harmonic and Imbalance Voltage Mitigation in Smart Grids: A DSTATCOM Based Solution. julkaisussa IEEE EUROCON 2015. 2015 https://doi.org/10.1109/EUROCON.2015.7313751

Zare A, Sreedhar KK, Vadakital VKM, Aminlou A, Hannuksela MM, Gabbouj M. HEVC-compliant viewport-adaptive streaming of stereoscopic panoramic video. julkaisussa 2016 Picture Coding Symposium, PCS 2016. IEEE. 2017 https://doi.org/10.1109/PCS.2016.7906401

Yancheshmeh FS, Chen K, Kämäräinen J-K. Hierarchical deformable part models for heads and tails. julkaisussa VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications . Vuosikerta 5. SCITEPRESS. 2018. s. 45-55 https://doi.org/10.5220/0006532700450055

Närhi M, Tengvall M, Toivonen J, Dudley JM, Genty G. High Dynamic Range Single-Shot Spectral Measurements of Spontaneous Modulation Instability. julkaisussa Frontiers in Optics 2016. Optical Society of America (OSA). 2016. FF2B.1

Mateos X, Loiko P, Lamrini S, Scholle K, Fuhrberg P, Suomalainen S et al. Highly-efficient Ho:KY(WO4)2 thin-disk lasers at 2.06 μm. julkaisussa Pacific-Rim Laser Damage 2018: Optical Materials for High-Power Lasers. SPIE, IEEE. 2018. 107130J. (Proceedings of SPIE). https://doi.org/10.1117/12.2316822

Viheriälä J, Aho AT, Virtanen H, Reuna J, Lyytikäinen J, Guina M. High Peak Power Laser Diodes for Eye Safe LIDAR with Integrated Wavelength Locking Element. julkaisussa 2019 Conference on Lasers and Electro-Optics Europe European Quantum Electronics Conference (CLEO/Europe-EQEC). IEEE. 2019 https://doi.org/10.1109/CLEOE-EQEC.2019.8872661

Zia N, Viheriälä J, Koivusalo E, Aho A, Suomalainen S, Guina M. High performance GaSb superluminescent diodes for tunable light source at 2 μm and 2.55 μm. julkaisussa CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018 https://doi.org/10.1364/CLEO_AT.2018.JTu2A.28

Viheriälä J, Aho AT, Mäkelä J, Salmi J, Virtanen H, Leinonen T et al. High-power 1550 nm tapered DBR lasers fabricated using soft UV-nanoimprint lithography. julkaisussa High-Power Diode Laser Technology and Applications XIV. SPIE. 2016. 97330Q. (SPIE Conference Proceedings). https://doi.org/10.1117/12.2207423

Penttinen J-P, Leinonen T, Korpijärvi V-M, Kantola E, Guina M. High power GaInNAs VECSEL emitting at 1230/615 nm. julkaisussa The European Conference on Lasers and Electro-Optics 2015. OSA. 2015

Fedotov A, Noronen T, Rissanen J, Gumenyuk R, Petrov A, Chamorovskii Y et al. High power picosecond MOPA with anisotropic ytterbium-doped tapered double-clad fiber. julkaisussa Taccheo S, Mackenzie JI, Ferrari M, toimittajat, Proceedings of SPIE : Fiber Lasers and Glass Photonics: Materials through Applications. Vuosikerta 10683. SPIE-INT SOC OPTICAL ENGINEERING. 2018. (Proceedings of SPIE). https://doi.org/10.1117/12.2307693