Lubricated icephobic coatings prepared by flame spraying with hybrid feedstock injection

Avoiding the initial adhesive friction peak in fretting

Effect of heat-treatment on the upconversion of NaYF₄:Yb³⁺, Er³⁺ nanocrystals containing silver phosphate glass

Characteristics of carbide-free medium-carbon bainitic steels in high-stress abrasive wear conditions

Effect of prior austenite grain size on the abrasive wear resistance of ultra-high strength martensitic steels

Additive manufacturing of monolithic supercapacitors with biopolymer separator

Rotational Diffusion of Membrane Proteins in Crowded Membranes

A study of Cr₃C₂-based HVOF- and HVAF-sprayed coatings

Abrasion, dry particle erosion and cavitation erosion resistance

Structure and in vitro dissolution of Mg and Sr containing borosilicate bioactive glasses for bone tissue engineering

Photostable orange-red fluorescent unsymmetrical diketopyrrolopyrrole-BF₂hybrids

Transparent Yb³⁺ doped phosphate glass-ceramics

Cold gas spraying of a high-entropy CrFeNiMn equiatomic alloy

Compounding and characterization of recycled multilayer plastic films

Electronic transport in n-type modulation-doped AlGaAs/GaAsBi quantum well structures

Influence of Bi and thermal annealing on electron effective mass and electron mobility

Influence of powder properties on residual stresses formed in high-pressure liquid fuel HVOF sprayed WC-CoCr coatings

Ultrafast Photochemistry of the [Cr(NCS)₆]^3- Complex in Dimethyl Sulfoxide and Dimethylformamide upon Excitation into Ligand-Field Electronic State

Cold-Sprayed Al6061 coatings

Online spray monitoring and influence of process parameters on coating properties

Novel borosilicate bioactive scaffolds with persistent luminescence

Evaluation of Residual Stresses and Their Influence on Cavitation Erosion Resistance of High Kinetic HVOF and HVAF-Sprayed WC-CoCr Coatings

Phase-change material

Natural rubber composites for heat storage applications

Effect of carbon nanotubes and nanodiamonds on the heat storage ability of natural rubber composites

Assessment of pitting corrosion in bare and passivated (wet scCO₂-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS)

Mining tailings as a raw material for glass-bonded thermally sprayed ceramic coatings

Microstructure and properties

A bifacial colour-tunable system via combination of a cholesteric liquid crystal network and hydrogel

Energy dissipation in natural rubber latex films

The effect of stabilizers, leaching and acetone-treatment

Power loss mechanisms in n-type modulation-doped AlGaAs/GaAsBi quantum well heterostructures

Effect of tempering on the impact-abrasive and abrasive wear resistance of ultra-high strength steels

First principles prediction of the solar cell efficiency of chalcopyrite materials  AgMX₂(M=In, Al; X=S, Se, Te)

Porous polybutylene succinate films enabling adhesion of human embryonic stem cell-derived retinal pigment epithelial cells (hESC-RPE)

Antibacterial polymer fibres by rosin compounding and melt-spinning

Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF

Characterizing the micro-impact fatigue behavior of APS and HVOF-sprayed ceramic coatings

Fluorine losses in Er³⁺oxyfluoride phosphate glasses and glass-ceramics

Modelling thermodynamics in a high erature superconducting dipole magnet

An inverse problem based approach

Erosion wear performance of WC-10Co4Cr and Cr₃C₂-25NiCr coatings sprayed with high-velocity thermal spray processes

Water-Responsive and Mechanically Adaptive Natural Rubber Composites by in Situ Modification of Mineral Filler Structures

Epitaxial phases of high Bi content GaSbBi alloys

Role of fracture toughness in impact-abrasion wear

Comparison of various high-stress wear conditions and wear performance of martensitic steels

Analysis of GaAsBi growth regimes in high resolution with respect to As/Ga ratio using stationary MBE growth

Hydrolysis and drug release from poly(ethylene glycol)-modified lactone polymers with open porosity

Mining tailings as raw materials for reaction-sintered aluminosilicate ceramics

Effect of mineralogical composition on microstructure and properties

Solvent Welding and Imprinting Cellulose Nanofiber Films Using Ionic Liquids

Characterization of Powder-Precursor HVOF-Sprayed Al₂O₃-YSZ/ZrO₂ Coatings

Low-dimensional formamidinium lead perovskite architectures via controllable solvent intercalation

Design, processing, and characterization of an optical core-bioactive clad phosphate fiber for biomedical applications

Flip-chip Wafer-fused OP-VECSELs emitting 3.65 W at the 1.55-μm waveband

Temperature scanning stress relaxation behavior of water responsive and mechanically adaptive elastomer nanocomposites

Structure and Dynamics of Thermosensitive pDNA Polyplexes Studied by Time-Resolved Fluorescence Spectroscopy

Process Parameter Impact on Suspension-HVOF-Sprayed Cr₂O₃ Coatings

Mechanical characterization of pore-graded bioactive glass scaffolds produced by robocasting

How well can we predict cluster fragmentation inside a mass spectrometer?

Reversible photodoping of TiO2 nanoparticles

Optical properties of GaAs_1-xBi_x/GaAs quantum well structures grown by molecular beam epitaxy on (100) and (311)B GaAs substrates

Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals

Mechanical, thermal, and burning properties of viscose fabric composites

Influence of epoxy resin modification

Recent progress in biohydrometallurgy and microbial characterisation

Post operation inactivation of acidophilic bioleaching microorganisms using natural chloride-rich mine water

Near-threshold high spin amplification in a 1300 nm GaInNAs spin laser

Exciton localization and structural disorder of GaAs_1-xBi_x/GaAs quantum wells grown by molecular beam epitaxy on (311)B GaAs substrates

Luminescence of Er³⁺ doped oxyfluoride phosphate glasses and glass-ceramics

The effect of carbon and nickel additions on the precursor synthesis of Cr₃C₂-Ni nanopowder

The effects of laser patterning 10CeTZP-Al₂O₃ nanocomposite disc surfaces

Osseous differentiation and cellular arrangement in vitro

Influence of the phosphate glass melt on the corrosion of functional particles occurring during the preparation of glass-ceramics

A study of electric transport in n- and p-type modulation-doped GaInNAs/GaAs quantum well structures under a high electric field

Accurate Binding of Sodium and Calcium to a POPC Bilayer by Effective Inclusion of Electronic Polarization

Powering of an HTS dipole insert-magnet operated standalone in helium gas between 5 and 85 K

Membrane bound COMT isoform is an interfacial enzyme

General mechanism and new drug design paradigm

Effect of nozzle geometry on the microstructure and properties of hvaf-sprayed wc-10co4cr and cr3c2-25nicr coatings

Properties of HVOF-sprayed Stellite-6 coatings

Thermal Isomerization of Hydroxyazobenzenes as a Platform for Vapor Sensing

Improving the high temperature abrasion resistance of thermally sprayed Cr₃C₂-NiCr coatings by WC addition

Soft hydrazone crosslinked hyaluronan- and alginate-based hydrogels as 3D supportive matrices for human pluripotent stem cell-derived neuronal cells

High-performance elastomeric strain sensors based on nanostructured carbon fillers for potential tire applications

Improved Stability of Atomic Layer Deposited Amorphous TiO₂ Photoelectrode Coatings by Thermally Induced Oxygen Defects

Entrapped Styrene Butadiene Polymer Chains by Sol-Gel-Derived Silica Nanoparticles with Hierarchical Raspberry Structures

Arc-sprayed Fe-based coatings from coredwires for wear and corrosion protection in power engineering

Ortho-Fluorination of azophenols increases the mesophase stability of photoresponsive hydrogen-bonded liquid crystals

Improved electromechanical response in acrylic rubber by different carbon-based fillers

Modification of epoxy resin by silane-coupling agent to improve tensile properties of viscose fabric composites

Persistent luminescent particles containing bioactive glasses

Prospect toward tracking in-vivo implant mineralization using biophotonic ceramics

Tribology of FeVCrC coatings deposited by HVOF and HVAF thermal spray processes

Stable blue phase polymeric Langmuir-Schaefer films based on unsymmetrical hydroxyalkadiynyl N-arylcarbamate derivatives

Evaluating the toughness of APS and HVOF-sprayed Al₂O₃-ZrO₂-coatings by in-situ- and macroscopic bending

Better understanding of the role of SiO₂, P₂O₅ and Al₂O₃ on the spectroscopic properties of Yb³⁺ doped silica sol-gel glasses

Novel Online Diagnostic Analysis for In-Flight Particle Properties in Cold Spraying

Simultaneous removal of tetrathionate and copper from simulated acidic mining water in bioelectrochemical and electrochemical systems

Convenient extraction method for quantification of thin zinc patina layers

Efficient photon upconversion at remarkably low annihilator concentrations in a liquid polymer matrix: when less is more

Supercritical carbon dioxide treatment of hot dip galvanized steel as a surface treatment before coating

Time-Resolved Fluorescence Spectroscopy Reveals Fine Structure and Dynamics of Poly(l-lysine) and Polyethylenimine Based DNA Polyplexes

Oxygen and water vapor transmission rates of starch-poly(vinyl alcohol) barrier coatings for flexible packaging paper

Infrared Thermography as a Non-destructive Testing Solution for Thermal Spray Metal Coatings

Erosive wear of filled vinylester composites in water and acidic media at elevated temperature

Fluorimetric oxygen sensor with an efficient optical read-out for in vitro cell models

Starch-poly(vinyl alcohol) barrier coatings for flexible packaging paper and their effects of phase interactions

Investigation of long-term chemical stability of structured ZnO films in aqueous solutions of varying conditions

Systematic analysis of coating-substrate interactions in the presence of flow localization

Wear of cemented tungsten carbide percussive drill–bit inserts

Laboratory and field study

A Study of Cr₃C₂-Based HVOF- and HVAF-Sprayed Coatings

Microstructure and Carbide Retention

Configurational Disorder of Water Hydrogen-Bond Network at the Protein Dynamical Transition

Vegetable fillers for electric stimuli responsive elastomers

Quench absorption coils

A quench protection concept for high-field superconducting accelerator magnets

Halogen bonding stabilizes a cis-azobenzene derivative in the solid state

A crystallographic study

Effect of the addition of Al₂O₃, TiO₂ and ZnO on the thermal, structural and luminescence properties of Er³⁺-doped phosphate glasses

Hierarchical Self-Assembly of Halogen-Bonded Block Copolymer Complexes into Upright Cylindrical Domains

Electromagnetic nonlinearities in a Roebel-cable-based accelerator magnet prototype

Variational approach

Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets

Aligned Poly(ε-caprolactone) Nanofibers Guide the Orientation and Migration of Human Pluripotent Stem Cell-Derived Neurons, Astrocytes, and Oligodendrocyte Precursor Cells In Vitro

Sliding wear behaviour of HVOF and HVAF sprayed Cr₃C₂-based coatings

Load capacity of lubricated bismuth bronze bimetal bearing under elliptical sliding motion

Non-destructive and wireless monitoring of biodegradable polymers

Two cations, two mechanisms

Interactions of sodium and calcium with zwitterionic lipid membranes

HVOF- and HVAF-Sprayed Cr₃C₂-NiCr Coatings Deposited from Feedstock Powders of Spherical Morphology

Microstructure Formation and High-Stress Abrasive Wear Resistance Up to 800 °C

Abrasive-Erosive Wear of Thermally Sprayed Coatings from Experimental and Commercial Cr₃C₂-Based Powders

Optimization of HVOF Cr3C2-NiCr coating for increased fatigue performance

Improvement of actuation performance of dielectric elastomers by barium titanate and carbon black fillers

Erosion–corrosion resistance of various stainless steel grades in high-temperature sulfuric acid solution

Photocatalytic and antibacterial properties of ZnO films with different surface topographies on stainless steel substrate

Polyarginine Interacts More Strongly and Cooperatively than Polylysine with Phospholipid Bilayers

Barkhausen noise response of three different welded duplex stainless steels

Detergent impurity effect on recycled HDPE

Properties after repetitive processing

Reinforced chloroprene rubber by in situ generated silica particles

Evidence of bound rubber on the silica surface

The red, purple and blue modifications of polymeric unsymmetrical hydroxyalkadiynyl-N-arylcarbamate derivatives in Langmuir-Schaefer films

Novel oxyfluorophosphate glasses and glass-ceramics

Sliding and abrasive wear behaviour of HVOF- and HVAF-sprayed Cr₃C₂-NiCr hardmetal coatings

Erosion wear of vinylester matrix composites in aqueous and acidic environments at elevated temperatures

Characterization of High-Velocity Single Particle Impacts on Plasma-Sprayed Ceramic Coatings

Structurally Controlled Dynamics in Azobenzene-Based Supramolecular Self-Assemblies in Solid State

Effect of incorporation of CdS NPs on performance of PTB7

PCBM organic solar cells

Microstructure and Sliding Wear Behavior of Fe-Based Coatings Manufactured with HVOF and HVAF Thermal Spray Processes

Thermal, structural and optical properties of Er³⁺ doped phosphate glasses containing silver nanoparticles

Influence of heat treatment on the abrasive wear resistance of a Cr₃C₂NiCr coating deposited by an ethene-fuelled HVOF spray process

Chemical synthesis of WC-Co from water-soluble precursors

The effect of carbon and cobalt additions to WC synthesis

DFT simulations and microkinetic modelling of 1-pentyne hydrogenation on Cu₂₀ model catalysts

Stability and Function at High Temperature. What Makes a Thermophilic GTPase Different from Its Mesophilic Homologue

Phenothiazine and carbazole substituted pyrene based electroluminescent organic semiconductors for OLED devices

Guanidinium Pairing Facilitates Membrane Translocation

Chemical and bacterial leaching of metals from a smelter slag in acid solutions

Dissolution behavior of the bioactive glass S53P4 when sodium is replaced by potassium, and calcium with magnesium or strontium

Compatibilization of natural rubber/nitrile rubber blends by sol–gel nano-silica generated by in situ method

Microstructural and abrasion wear characteristics of laser-clad tool steel coatings

Photoresponsive liquid-crystalline polymer films bilayered with an inverse opal structure

Rapid and sensitive detection of norovirus antibodies in human serum with a biolayer interferometry biosensor

Processing and characterization of phosphate glasses containing CaAl2O4:Eu2+,Nd3+ and SrAl2O4:Eu2+,Dy3+ microparticles

Effect of rubber polarity on selective wetting of carbon nanotubes in ternary blends

Photomechanical Energy Transfer to Photopassive Polymers through Hydrogen and Halogen Bonds

In Situ Photocontrol of Block Copolymer Morphology during Dip-Coating of Thin Films

Comparison of laboratory rolling-sliding wear tests with in-service wear of nodular cast iron rollers against wire ropes

Production of sulfonated polyetheretherketone/polypropylene fibers for photoactive textiles

Characterization of thermally aged polyetheretherketone fibres

Mechanical, thermal, rheological and chemical property changes

PIP2 and Talin Join Forces to Activate Integrin

Effect of spraying parameters on the microstructural and corrosion properties of HVAF-sprayed Fe-Cr-Ni-B-C coatings

Molecular Design of Light-Responsive Hydrogels, for in Situ Generation of Fast and Reversible Valves for Microfluidic Applications

Unintentional boron contamination of MBE-grown GaInP/AlGaInP quantum wells

Effect of Phosphatidic Acid on Biomembrane

Experimental and Molecular Dynamics Simulations Study

Evaluation of crushing strength of spray-dried MgAl2O4 granule beds

Nonlinear Optical Properties of Fluorescent Dyes Allow for Accurate Determination of Their Molecular Orientations in Phospholipid Membranes

Role of Internal Water on Protein Thermal Stability

The Case of Homologous G Domains

Measuring optical anisotropy in poly(3,4-ethylene dioxythiophene)

poly(styrene sulfonate) films with added graphene

A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation

Synthesis and Photophysical Properties of Two Diazaporphyrin-Porphyrin Hetero Dimers in Polar and Nonpolar Solutions

Passive resonance sensor based method for monitoring particle suspensions

PEGylated liposomes as carriers of hydrophobic porphyrins

Equipment for obtaining polimeric nanofibres by electrospinning technology

II. The obtaining of polimeric nanofibers

Hydration of hydroxyl and amino groups examined by molecular dynamics and neutron scattering

Effect of melting state on the thermal shock resistance and thermal conductivity of APS ZrO₂-7.5wt.% Y₂O₃ coatings

The effect of impact conditions on the wear and deformation behavior of wear resistant steels

Erosive wear of various stainless steel grades used as impeller blade materials in high temperature aqueous slurry

Oxidation of cholesterol does not alter significantly its uptake into high-density lipoprotein particles

Effect of rheological properties of dissolved cellulose/microfibrillated cellulose blend suspensions on film forming

Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid

Tribology of HVOF- and HVAF-sprayed WC-10Co4Cr hardmetal coatings

A comparative assessment

High temperature corrosion of thermally sprayed NiCr and FeCr coatings covered with a KCl-K₂SO₄ salt mixture

Exploring the role of stearic acid in modified zinc aluminum layered double hydroxides and their acrylonitrile butadiene rubber nanocomposites

Polymer looping is controlled by macromolecular crowding, spatial confinement, and chain stiffness

Sulfonated polyetheretherketone/polypropylene polymer blends for the production of photoactive materials

Supramolecular hierarchy among halogen and hydrogen bond donors in light-induced surface patterning

Perfluoro-1,1′-biphenyl and perfluoronaphthalene and their derivatives as π-acceptors for anions

Aryl end-capped quaterthiophenes applied as anode interfacial layers in inverted organic solar cells

Are coarse-grained models apt to detect protein thermal stability? the case of OPEP force field

Dielectric Breakdown Strength of Thermally Sprayed Ceramic Coatings

Effects of Different Test Arrangements

Mechanical performance and CO2 uptake of ion-exchanged zeolite A structured by freeze-casting

Influence of the Spray Gun Type on Microstructure and Properties of HVAF Sprayed Fe-Based Corrosion Resistant Coatings

DNA lesion can facilitate base ionization

Vertical ionization energies of aqueous 8-oxoguanine and its nucleoside and nucleotide

Unmodified LDH as reinforcing filler for XNBR and the development of flame-retardant elastomer composites

Fabrication and Characterization of Amorphous Alumina-Yttria-Stabilized Zirconia Coatings by Air Plasma Spraying

Processable aromatic polyesters based on bisphenol derived from cashew nut shell liquid

synthesis and characterization

Electromagnetic interference shielding effectiveness of MWCNT filled poly(ether sulfone) and poly(ether imide) nanocomposites

A supramolecular approach to photoresponsive thermo/solvoplastic block copolymer elastomers

Rapid, Brushless Self-assembly of a PS-b-PDMS Block Copolymer for Nanolithography

Effect of head group size on the photoswitching applications of azobenzene Disperse Red 1 analogues

Recent twists in photoactuation and photoalignment control

Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels

Effect of silane integrated sol-gel derived in situ silica on the properties of nitrile rubber

Performance testing of iron based thermally sprayed HVOF coatings in a biomass-fired fluidised bed boiler

Accurate description of calcium solvation in concentrated aqueous solutions

Surface behavior of hydrated guanidinium and ammonium ions

A comparative study by photoelectron spectroscopy and molecular dynamics

Carbon nanotubes-filled thermoplastic polyurethane-urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites

Damage mechanisms and cracking behavior of thermal sprayed WC-CoCr coating under scratch testing

Microphase mechanism of "superquenching" of luminescent probes in aqueous solutions of DNA and some other polyelectrolytes

Azopolymer-based micro- and nanopatterning for photonic applications

Both zundel and eigen isomers contribute to the IR spectrum of the gas-phase H9O4 + cluster

Stearate Modified Zinc-Aluminum Layered Double Hydroxides and Acrylonitrile Butadiene Rubber Nanocomposites

The effects of UV irradiation to polyetheretherketone fibres

Characterization by different techniques

Effect of non-rubber components of NR on the carbon nanotube (CNT) localization in SBR/NR blends

Self-assembly of polystyrene-block-poly(4-vinylpyridine) block copolymer on molecularly functionalized silicon substrates

Fabrication of inorganic nanostructured etchmask for lithographic use

Proliferation and differentiation of adipose stem cells towards smooth muscle cells on poly(trimethylene carbonate) membranes

Effect of surface morphology of poly(ïμ-caprolactone) scaffolds on adipose stem cell adhesion and proliferation

Human adipose stem cells in chondrogenic differentiation medium without growth factors differentiate towards annulus fibrosus phenotype in vitro

Release of halide ions from the buried active site of the haloalkane dehalogenase LinB revealed by stopped-flow fluorescence analysis and free energy calculations

How conformational flexibility stabilizes the hyperthermophilic elongation factor G-domain

Spectroscopic study of a DNA brush synthesized in situ by surface initiated enzymatic polymerization

Reversal of the hofmeister series

Specific ion effects on peptides

Cation-specific effects on enzymatic catalysis driven by interactions at the tunnel mouth

Immobilized bioactive agents onto polyurethane surface with heparin and phosphorylcholine group

Nanoindentation study of light-induced softening of supramolecular and covalently functionalized azo polymers

Biomimetic zinc chlorin-poly(4-vinylpyridine) assemblies

Doping level dependent emission-absorption regimes

Ab initio study of the surface properties of austenitic stainless steel alloys

Aqueous guanidinium-carbonate interactions by molecular dynamics and neutron scattering

Relevance to ion-protein interactions

Naturally occurring amino acids

A suitable substitute of N-N/-di-phenyl guanidine (DPG) in silica tyre formulation?

Elastomer composites based on carbon nanotubes and ionic liquid

Transforming anion instability into stability

Contrasting photoionization of three protonation forms of the phosphate ion upon moving into water

Block copolymer lithography

Feature size control and extension by an over-etch technique

Influence of ionic liquids on the dielectric relaxation behavior of CNT based elastomer nanocomposites

Azobenzene photomechanics

Prospects and potential applications

Biomimetic surface modification of polycarbonateurethane film via phosphorylcholine-graft for resisting platelet adhesion

Effect of sol-gel derived in situ silica on the morphology and mechanical behavior of natural rubber and acrylonitrile butadiene rubber blends

Cysteine-tagged chimeric avidin forms high binding capacity layers directly on gold

Accurate description of aqueous carbonate ions

An effective polarization model verified by neutron scattering

Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide

Behavior of 4-hydroxynonenal in phospholipid membranes

Enhanced thermal stability of polychloroprene rubber composites with ionic liquid modified MWCNTs

Highly exfoliated natural rubber/Clay composites by "propping-open procedure"

The influence of fatty-acid chain length on exfoliation

A novel thermotropic elastomer based on highly-filled LDH-SSB composites

Crystallization mechanism of the bioactive glasses, 45S5 and S53P4

Printable and flexible macroporous organosilica film with high protein adsorption capacity

Location of the Azobenzene moieties within the cross-linked liquid-crystalline polymers can dictate the direction of photoinduced bending

Orientational dependence of the affinity of guanidinium ions to the water surface

Efficient surface structuring and photoalignment of supramolecular polymer-azobenzene complexes through rational chromophore design

Thermally evaporated single-crystal Germanium on Silicon

Towards universal enrichment nanocoating for IR-ATR waveguides

Detection of 3,4-methylenedioxymethamphetamine (MDMA, ecstasy) by displacement of antibodies

Urea and guanidinium induced denaturation of a Trp-cage miniprotein

Hybrid nanoparticle design based on cationized gelatin and the polyanions dextran sulfate and chondroitin sulfate for ocular gene therapy

Optimised selection of new protective coatings for biofuel boiler applications

Preparation of zinc oxide free, transparent rubber nanocomposites using a layered double hydroxide filler

Energetic origin of proton affinity to the air/water interface

Preintercalation of an organic accelerator into nanogalleries and preparation of ethylene propylene diene terpolymer rubber-clay nanocomposites

Ionization of purine tautomers in nucleobases, nucleosides, and nucleotides

From the gas phase to the aqueous environment

Calculated electronic density of states and structural properties of tetrahedral amorphous carbon

A Finite Cluster Approach to the Electron-Hole Pair Damping of the Adsorbate Vibration

CO Adsorbed on Cu(100)

Development in additive methods in aramid fiber surface modification to increase fiber-matrix adhesion

A review

Supramolecular design principles for efficient photoresponsive polymer-azobenzene complexes

Stimuli-responsive photonic polymer coatings

Formation mechanisms, structure, and properties of HVOF-sprayed WC-CoCr coatings

An approach toward process maps

Development and application of HVOF sprayed spinel protective coating for SOFC interconnects

Increased lifetime for biomass and waste to energy power plant boilers with HVOF coatings

High temperature corrosion testing under chlorine-containing molten salt

Local Mechanical Properties at the Dendrite Scale of Ni-Based Superalloys Studied by Advanced High Temperature Indentation Creep and Micropillar Compression Tests

Corrosion properties of thermally sprayed bond coatings under plasma sprayed chromia coating in sulfuric acid solutions

Process time importance in the product properties evolvement during extrusion coating of different LDPE grades

Active packaging by paper coating

Improved properties for packaging materials by nanoscale surface modification and ALD barrier coating

Abrasion and compression resistance of liquid-flame-spray-deposited functional nanoparticle coatings on paper

HVOF process control enabling strategies

Gas atomized thermal spray powders of various metals and alloys

The 5th international workshop on numerical modelling of high temperature superconductors

Vacancy-type defect distributions near argon sputtered Al(100) surface studied by variable-energy positrons and molecular dynamics simulations