Dongho-Nguimdo, G. M., Igumbor, E., Zambou, S., & Joubert, D. P. (2019). First principles prediction of the solar cell efficiency of chalcopyrite materials AgMX 2 (M=In, Al; X=S, Se, Te). Computational Condensed Matter, 21, [e00391]. https://doi.org/10.1016/j.cocom.2019.e00391

Silverajan, B., Zhao, H., & Kamath, A. (2019). A Semantic Meta-Model Repository for Lightweight M2M. teoksessa 2018 IEEE International Conference on Communication Systems, ICCS 2018 (Sivut 468-472). IEEE. https://doi.org/10.1109/ICCS.2018.8689185

Leivo, V., Sarlin, E., Suonketo, J., Pikkuvirta, J., & Pentti, M. (2019). Muovipäällysteisten lattioiden vaurioituminen kosteuden vaikutuksesta. teoksessa Sisäilmastoseminaari 2019: 14.3.2019 : Sisäilmayhdistys raportti 37 (Sivut 383-388). (SIY Raportti; Nro 37). SIY SISÄILMATIETO OY.

Fedotov, A., Pominova, D., Orlovskaya, E., Orlovskii, Y., Niemi, T., & Gumenyuk, R. (2019). Analysis of upconversion nanoparticles as an active medium for upconversion light sources. teoksessa Proceedings of SPIE: Optical Components and Materials XVI (Vuosikerta 10914). [109140R] (Proceedings of SPIE : the International Society for Optical Engineering; Vuosikerta 10914). S P I E - International Society for Optical Engineering. https://doi.org/10.1117/12.2507599

Messo, T., Roinila, T., Aapro, A., & Luhtala, R. (Hyväksytty/painossa). Accurate impedance model of grid-connected inverter for small-signal stability assessment in high-impedance grid. IEEJ JOURNAL OF INDUSTRY APPLICATIONS, 8(3), [3]. https://doi.org/10.23919/IPEC.2018.8507573

Viheriälä, J., Tuorila, H., Zia, N., Cherchi, M., Aalto, T., & Guina, M. (2019). 1.3μm U-bend traveling wave SOA devices for high efficiency coupling to silicon photonics. teoksessa G. T. Reed, & A. P. Knights (Toimittajat), Silicon Photonics XIV [109230E] (Proceedings of SPIE - The International Society for Optical Engineering; Vuosikerta 10923). SPIE, IEEE. https://doi.org/10.1117/12.2505935

Mereuta, A., Nechay, K., Caliman, A., Suruceanu, G., Gallo, P., Guina, M., & Kapon, E. (2019). 1.55-μm wavelength wafer-fused OP-VECSELs in flip-chip configuration. teoksessa U. Keller (Toimittaja), Vertical External Cavity Surface Emitting Lasers (VECSELs) IX [1090103] (Proceedings of SPIE - The International Society for Optical Engineering; Vuosikerta 10901). SPIE, IEEE. https://doi.org/10.1117/12.2508342

Yadav, A., Chichkov, N. B., Gumenyuk, R., Zherebtsov, E., Melkumov, M. A., Yashkov, M. V., ... Rafailov, E. U. (2019). 405-nm pumped Ce 3+ -doped silica fiber for broadband fluorescence from cyan to red. teoksessa M. J. F. Digonnet, & S. Jiang (Toimittajat), Optical Components and Materials XVI [1091406] (Proceedings of SPIE - The International Society for Optical Engineering; Vuosikerta 10914). SPIE, IEEE. https://doi.org/10.1117/12.2509599

Jääskeläinen, A., Sillanpää, V., & Helander, N. (2019). A model for profiling information and knowledge management in the public sector. teoksessa Proceedings of 14th IFKAD 2019 conference: Matera, Italy, 5-7 June. (Proceedings IFKAD).

Tiitola, V., Korhonen, T., Laine, T., & Lyly-Yrjänäinen, J. (2019). Dynamics of value in technology inspired value co-creation: Case in homecare value network. teoksessa 14th IFKAD 2019 Proceedings: 5-7 June 2019, Matera, Italy (PROCEEDINGS IFKAD). IKAM Centro Studi & Ricerche.

Taibi, D., & Systä, K. (2019). From monolithic systems to microservices: A decomposition framework based on process mining. teoksessa D. Ferguson, V. M. Munoz, M. Helfert, & C. Pahl (Toimittajat), CLOSER 2019 - Proceedings of the 9th International Conference on Cloud Computing and Services Science (Sivut 153-164). SCITEPRESS. https://doi.org/10.5220/0007755901530164

Almeida, B., Chauhan, V., Kandavalli, V., & Ribeiro, A. (2019). Mean and variability in RNA polymerase numbers are correlated to the mean but not the variability in size and composition of Escherichia coli cells. teoksessa E. De Maria, H. Gamboa, & A. Fred (Toimittajat), BIOINFORMATICS 2019 - 10th International Conference on Bioinformatics Models, Methods and Algorithms, Proceedings; Part of 12th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2019 (Sivut 226-233). SCITEPRESS. https://doi.org/10.5220/0007456102260233

Kahle, H., Penttinen, J. P., Phung, H. M., Rajala, P., Tukiainen, A., Ranta, S., & Guina, M. (2019). MECSELs with direct emission in the 760 nm to 810 nm spectral range: A single- and double-side pumping comparison and high-power continuous-wave operation. teoksessa U. Keller (Toimittaja), Vertical External Cavity Surface Emitting Lasers (VECSELs) IX [109010D] (Proceedings of SPIE - The International Society for Optical Engineering; Vuosikerta 10901). SPIE, IEEE. https://doi.org/10.1117/12.2512111

Radevici, I., Sadi, T., Tripurari, T., Tiira, J., Ranta, S., Tukiainen, A., ... Oksanen, J. (2019). Observation of local electroluminescent cooling and identifying the remaining challenges. teoksessa D. V. Seletskiy, R. I. Epstein, & M. Sheik-Bahae (Toimittajat), Photonic Heat Engines: Science and Applications [109360A] (Proceedings of SPIE - The International Society for Optical Engineering; Vuosikerta 10936). SPIE, IEEE. https://doi.org/10.1117/12.2505814

Piccardi, A., Perumbilavil, S., Kauranen, M., Strangi, G., & Assanto, G. (2019). Random lasing control with optical spatial solitons in nematic liquid crystals. teoksessa P. Ribeiro, M. Raposo, & D. Andrews (Toimittajat), PHOTOPTICS 2019 - Proceedings of the 7th International Conference on Photonics, Optics and Laser Technology (Sivut 289-293). SCITEPRESS. https://doi.org/10.5220/0007575102890293

Garifullin, M. (2018). Experimental moment resistance of rectangular hollow section T joints. MATEC Web of Conferences, 245, [08003]. https://doi.org/10.1051/matecconf/201824508003

Chetan Kumar, V., Shiva Prakash, S. P., & Balandin, S. (2018). Performance Enhancement Of Optimized Link State Routing Protocol For Health Care Applications In Wireless Body Area Networks. teoksessa 2018 23rd Conference of Open Innovations Association (FRUCT) (Sivut 195-203). IEEE. https://doi.org/10.23919/FRUCT.2018.8588070

Kekonen, A., Bergelin, M., & Viik, J. (2018). Tutkimuskatsaus: Uusia menetelmiä haavan paranemisen arviointiin ja seurantaan. HAAVA, 20(3), 30-32.

Kirjavainen, J., Mäkinen, S., & Sommarberg, M. (2018). The Effects of Product Line Length on Firm Performance. teoksessa 2018 Portland International Conference on Management of Engineering and Technology (PICMET) IEEE. https://doi.org/10.23919/PICMET.2018.8481780

Majuri, M., & Lanz, M. (2018). Social capital characteristics in RD project networks. teoksessa 2018 Portland International Conference on Management of Engineering and Technology (PICMET) [8481775] IEEE. https://doi.org/10.23919/PICMET.2018.8481775

Sommarberg, M., & Mäkinen, S. (2018). Technopreneurial Characteristics Rising from the Ashes of Creative Destruction. teoksessa Proceedings in 2018 Portland International Conference in Management and Engineering (PICMET): (PICMET) 19-23 August 2018 (Sivut 1-10). IEEE. https://doi.org/10.23919/PICMET.2018.8481846

Monakhov, D., Naik, D., Curcio, I. D. D., & Toukomaa, H. (2018). Analysis of User Exploration Patterns during Scene Cuts in Omnidirectional Videos. teoksessa SMPTE 2018 SMPTE. https://doi.org/10.5594/M001845

Kekonen, A., Bergelin, M., Eriksson, J-E., Vesa, M., Johansson, M., & Viik, J. (2018). Long-term monitoring of acute wound healing from beneath the primary wound dressings. teoksessa 2018 16th Biennial Baltic Electronics Conference (BEC) IEEE. https://doi.org/10.1109/BEC.2018.8600956

Ahmed, S., Musfequr Rehman, S. M., Ukkonen, L., & Björninen, T. (2018). Glove-integrated slotted patch antenna for wearable UHF RFID reader. teoksessa 2018 IEEE International Conference on RFID Technology & Application (RFID-TA) IEEE. https://doi.org/10.1109/RFID-TA.2018.8552817

Qureshi, S., Björninen, T., & Virkki, J. (2018). Referenced backscattering compression level indicator based on passive UHF RFID tags. teoksessa 2018 IEEE International Conference on RFID Technology & Application (RFID-TA) IEEE. https://doi.org/10.1109/RFID-TA.2018.8552830

Pournoori, N., Khan, W., Ukkonen, L., & Björninen, T. (2018). RF energy harvesting system with RFID-enabled charge storage monitoring. teoksessa 2018 IEEE International Conference on RFID Technology & Application (RFID-TA) IEEE. https://doi.org/10.1109/RFID-TA.2018.8552826

Ortombina, L., Liegmann, E., Karamanakos, P., Tinazzi, F., Zigliotto, M., & Kennel, R. (2018). Constrained Long-Horizon Direct Model Predictive Control for Synchronous Reluctance Motor Drives. teoksessa 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018 [8460173] IEEE. https://doi.org/10.1109/COMPEL.2018.8460173

Schwarz, S., Hannuksela, M. M., Fakour-Sevom, V., & Sheikhi-Pour, N. (2018). 2D Video Coding of Volumetric Video Data. teoksessa 2018 Picture Coding Symposium, PCS 2018 - Proceedings (Sivut 61-65). [8456265] IEEE. https://doi.org/10.1109/PCS.2018.8456265

Us, D., Brzezinski, K., Buitenhuis, T., Dendooven, P., & Ruotsalainen, U. (2018). Evaluation of Median Root Prior for Robust In-Beam PET Reconstruction. IEEE Transactions on Radiation and Plasma Medical Sciences, 2(5), 490-498. https://doi.org/10.1109/TRPMS.2018.2854231

Taivalsaari, A., Mikkonen, T., Systä, K., & Pautasso, C. (2018). Web User Interface Implementation Technologies: An Underview. teoksessa 14th International Conference on Web Information Systems and Technologies (Sivut 127-136). SCITEPRESS. https://doi.org/10.5220/0006885401270136

Chen, X., He, H., Ukkonen, L., Virkki, J., Xu, J., Wang, T., & Cheng, L. (2018). Fabrication and Practical Evaluation of Glove-integrated Passive UHF RFID Tags. teoksessa 2018 IEEE International Conference on RFID Technology Application (RFID-TA) IEEE. https://doi.org/10.1109/RFID-TA.2018.8552814

Jokinen, J., Kanerva, M., & Saarela, O. (2018). Multi-site delamination analysis using virtual crack closure technique for a composite aircraft wing flap. teoksessa 31st Congress of the International Council of the Aeronautical Sciences (Proceedings): Belo Horizonte, Brazil September 9-14, 2018 ICAS Press.

Tuukkanen, S., & Rajala, S. (2018). Nanocellulose as a Piezoelectric Material. teoksessa Piezoelectricity - Organic and Inorganic Materials and Applications (Sivut 1-14). InTech Open Access Publisher. https://doi.org/10.5772/intechopen.77025

Kallonen, A., Nieminen, H., Das, S., & Sallinen, R. (2018). Comparison of food frequency questionnaire data and shopping records for the assessment of food intake. teoksessa Proceedings of Seventh International Conference on Well-Being in the Information Society: Fighting Inequalities (WIS 2018) (Sivut 25-30). (TUCS Lecture Notes; Vuosikerta 28).

Baczkiewicz, J., Pajunen, S., & Heinisuo, M. (2018). Effect of radiation inside square hollow section under moderate non-symmetric fire. Fire Research, 2(1), 25-30. [2:42]. https://doi.org/10.4081/fire.2018.42

Geng, J., Li, H., Liu, Y., Liu, Y., Kashef, M., Candell, R., & Bhattacharyya, S. S. (2018). Model-based cosimulation for industrial wireless networks. teoksessa WFCS 2018 - 2018 14th IEEE International Workshop on Factory Communication Systems (Sivut 1-10). IEEE. https://doi.org/10.1109/WFCS.2018.8402343

Koponen, P., Hanninen, S., Mutanen, A., Koskela, J., Rautiainen, A., Järventausta, P., ... Koivisto, H. (2018). Improved modelling of electric loads for enabling demand response by applying physical and data-driven models: Project Response. teoksessa 2018 IEEE International Energy Conference, ENERGYCON 2018 (Sivut 1-6). IEEE. https://doi.org/10.1109/ENERGYCON.2018.8398794

Momeni, K., & Martinsuo, M. (2018). Moving toward integrated solutions in project-based firms: Changes in sales practices. teoksessa Proceedings of EURAM18 European Academy of Management conference 2018 (EURAM conference). European Academy of Management, EURAM.

Madhala, P., Jussila, J., Aramo-Immonen, H., & Suominen, A. (2018). Systematic literature review on customer emotions in social media. teoksessa V. Cunnane, & N. Corcoran (Toimittajat), ECSM - Proceedings of the 5th European Conference on Social Media Limerick, Ireland.

Chen, X., He, H., Ukkonen, L., Virkki, J., Lu, Y., & Lam, H. (2018). Fabrication and reliability evaluation of passive UHF RFID T-shirts. teoksessa 2018 IEEE International Workshop on Antenna Technology, iWAT2018 - Proceedings (Sivut 1-4). IEEE. https://doi.org/10.1109/IWAT.2018.8379146

Kuula, P., Leppänen, M., Kolisoja, P., Korkiala-Tanttu, L., Sorvari, J., & Gustavsson, H. (2018). Education on the utilization of secondary materials in earthworks. teoksessa P. Lahtinen, & V. Raasakka (Toimittajat), Proceedings of the 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials: No Gradle no Grave Circular Economy into practice (Sivut 177-187). RIL - Finnish Association of Civil Engineers.

Leppänen, M., Sarkkila, J., Hämäläinen, H., & Rinkinen, J. (2018). Technical suitability of the fine fraction of municipal solid waste incineration bottom ash to the landfill capping liner. teoksessa V. Raasakka, & P. Lahtinen (Toimittajat), Proceedings of the 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials WASCON 2018: No Gradle, No Grave - Circular Economy into Practice (Sivut 168-175). RIL - Finnish Association of Civil Engineers.

Bolla, P., & Lohan, E-S. (2018). Dual-frequency signal processing architecture for robust and precise positioning applications. teoksessa 2018 IEEE/ION Position, Location and Navigation Symposium, PLANS 2018 (Sivut 72-80). IEEE. https://doi.org/10.1109/PLANS.2018.8373367

Ahola, T., Ståhle, M., & Martinsuo, M. (2018). Agency relationships in global project business. teoksessa Proceedings of EURAM18 European Academy of Management conference 2018 (EURAM conference). European Academy of Management, EURAM.

Martinsuo, M., & Vaittinen, E. (2018). Industrial customers’ organizational readiness for service innovations: Adopting data-based advanced services. teoksessa Proceedings of the 25th Innovation and Product Development Management Conference (International Product Development Management Conference). European Institute for Advanced Studies in Management, EIASM.

Toenger, S., Ahvenjärvi, J., Ryczkowski, P., & Genty, G. (2018). Intensity Interferometry of Supercontinuum Light. teoksessa T. Setälä, J. Turunen, A. T. Friberg, & K. Saastamoinen (Toimittajat), Trends in Electromagnetic Coherence (Publications of the University of Eastern Finland. Reports and studies in forestry and natural sciences; Nro 32). Joensuu: University of Eastern Finland.

Martinsuo, M., Vuorinen, L., Killen, C., & Laiti, M. (2018). Lifecycle-oriented framing of value at the front end of infrastructure projects. teoksessa Proceedings of EURAM18 European Academy of Management conference 2018 (EURAM conference). European Academy of Management, EURAM.

Martinsuo, M., & Laurila, F. (2018). Requirements from industrial internet for innovations in advanced industrial services. teoksessa Proceedings of the 25th Innovation and Product Development Management Conference (International Product Development Management Conference). European Institute for Advanced Studies in Management, EIASM.

Sillberg, P. (2018). Toward Manageable Data Sources. teoksessa T. Endrjukaite, H. Kangassalo, B. Thalheim, & Y. Kiyoki (Toimittajat), EJC 2018: Proceedings of the 28th International Conference on Information Modelling and Knowledge Bases (Sivut 485-494). Transport and Telecommunication Institute.

Ellman, A., Paronen, J., Juuti, T. S., & Tiainen, T. (2018). Re-use of engineering design rationale in Finnish SME project based industry. teoksessa Proceedigns of the Design 2018 15th International Design Conference (Sivut 1825-1832). The Design Society. https://doi.org/10.21278/idc.2018.0363

Lietzen, J., & Kylliäinen, M. (2018). Finnish Round Robin Test on Airborne Sound Insulation. teoksessa Proceedings of the 11th European Congress and Exposition on Noise Control Engineering, Euronoise 2018, May 27-31 2018, Hersonissos, Crete, Greece: Reduce Noise to Improve Life (Sivut 1677-1682). [282.162] (European Congress and Exposition on Noise Control Engineering). Hersonissos, Crete, Greece: European Acoustic Association EAA.

Lietzen, J., Miettinen, J., Kylliäinen, M., & Pajunen, S. (2018). Measurements of impact force excitation on wooden floors. teoksessa Proceedings of the 11th European Congress and Exposition on Noise Control Engineering, Euronoise 2018, May 27-31 2018, Hersonissos, Crete, Greece: Reduce Noise to Improve Life, Crete, May 27-31, 2018 (Sivut 1617-1622). [272.161] (Proceedings : European Conference on Noise Control). Hersonissos, Crete, Greece: European Acoustic Association EAA.

Vaittinen, E., & Martinsuo, M. (2018). Ready to sell? Requirements for promoting service selling in a manufacturing firm. teoksessa A. Bigdeli, T. Frandsen, J. Raja, & T. Baines (Toimittajat), Proceedings of the Spring Servitization Conference, DrivingCompetitiveness through Servitization, 14-16 May 2018 (Sivut 26-34). Aston University.

Jama, T., Lehtovuori, P., Rajaniemi, J., Siikonen, M., Mäntynen, J., Rantanen, A., ... Saarniaho, K. (2018). Ideoita kaavoituksen sisällön uudistamiseen: Kaavojen merkintöjen ja määräysten kehittäminen (KAMMI-hanke). Helsinki: Ympäristöministeriö.

Katkovnik, V., Shevkunov, I., Petrov, N. V., & Eguiazarian, K. (2018). Multiwavelength surface contouring from phase-coded diffraction patterns. teoksessa Unconventional Optical Imaging 2018. Strasbourg, France (Vuosikerta 10677). [106771B] (Proceedings of SPIE - The International Society for Optical Engineering; Vuosikerta 10677). SPIE. https://doi.org/10.1117/12.2306127

Suokas, E., & Kuusipalo, J. (2018). Process time importance in the product properties evolvement during extrusion coating of different LDPE grades. teoksessa 15th TAPPI Advanced Coating Fundamentals Symposium 2018: Charlotte; United States; 14 April 2018 through 15 April 2018 (Sivut 151-159). TAPPI Press.

Zhao, Y., Wang, Y., Zhang, X., Mateos, X., Pan, Z., Loiko, P., ... Petrov, V. (2018). Sub-100 fs pulse generation from a Tm,Ho: CALYO laser mode-locked by a GaSb-based SESAM at ~2043 nm. teoksessa CLEO: Science and Innovations, CLEO_SI 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_SI.2018.SF2N.1

Noronen, T., Fedotov, A., Rissanen, J., Gumenyuk, R., Butov, O., Chamorovskii, Y., ... Filippov, V. (2018). Ultra-large mode area single frequency anisotropic MOPA with double clad Yb-doped tapered fiber. teoksessa Fiber Lasers XV: Technology and Systems [105121T] (Proceedings of SPIE; Vuosikerta 10512). SPIE, IEEE. https://doi.org/10.1117/12.2288942

Fakour-Sevom, V., Guldogan, E., & Kämäräinen, J-K. (2018). 360 panorama super-resolution using deep convolutional networks. teoksessa VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications (Vuosikerta 4, Sivut 159-165). SCITEPRESS. https://doi.org/10.5220/0006618901590165

Voronin, V., Pismenskova, M., Zelensky, A., Cen, Y., Nadykto, A., & Egiazarian, K. (2018). Action recognition using the 3D dense microblock difference. teoksessa Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies II [108020O] (Proceedings of SPIE; Vuosikerta 10802). SPIE. https://doi.org/10.1117/12.2326801

M. Aref, M., Astola, P., Vihonen, J., Tabus, I., Ghabcheloo, R., & Mattila, J. (2018). Adaptive Feedback in Local Coordinates for Real-time Vision-Based Motion Control Over Long Distances. teoksessa International Conference on Robotics and Mechantronics : (ICRoM 2017) (Vuosikerta 320). [012009] (IOP conference series : materials science and engineering). IOP Publishing Ltd.. https://doi.org/10.1088/1757-899X/320/1/012009

Kerst, T., & Toivonen, J. (2018). Alpha radiation induced luminescence in solar blind spectral region. teoksessa CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.ATh4O.8

Sheikh, M. U., & Lempiainen, J. (2018). Analysis of outdoor and indoor propagation at 15 GHz and millimeter wave frequencies in microcellular environment. Advances in Science, Technology and Engineering Systems, 3(1), 160-167. https://doi.org/10.25046/aj030120

Taibi, D., Lenarduzzi, V., & Pahl, C. (2018). Architectural patterns for microservices: A systematic mapping study. teoksessa CLOSER 2018 - Proceedings of the 8th International Conference on Cloud Computing and Services Science (Sivut 221-232). SCITEPRESS. https://doi.org/10.5220/0006798302210232

Jääskeläinen, A., Schiele, H., & Aarikka-Stenroos, L. (2018). A social capital perspective on gaining optimal solutions from suppliers as preferred customer. teoksessa Academy of Management Proceedings (1 toim., Vuosikerta 2018). (Academy of Management Proceedings; Vuosikerta 2018, Nro 1). Academy of Management AOM. https://doi.org/10.5465/AMBPP.2018.16278abstract

Halbach, E., Kolu, A., & Ghabcheloo, R. (2018). Automated pile transfer work cycles with a robotic wheel loader. teoksessa K. Mela, S. Pajunen, & V. Raasakka (Toimittajat), 17th International Conference on Computing in Civil and Building Engineering (ICCCBE): Tampere, 5-7 June 2018 Tampere, Finland: RIL.

Garifullin, M., Bronzova, M. K., Heinisuo, M., Mela, K., & Pajunen, S. (2018). Cold-formed RHS T joints with initial geometrical imperfections. Magazine of Civil Engineering, 80(4), 81-94. https://doi.org/10.18720/MCE.80.8

Bautista, G., Dreser, C., Zang, X., Kern, D., Kauranen, M., & Fleischer, M. (2018). Collective nonlinear optical effects in plasmonic nanohole ensembles of different rotational symmetries. teoksessa CLEO: QELS_Fundamental Science 2018 [FW3G.3] The Optical Society; OSA. https://doi.org/10.1364/CLEO_QELS.2018.FW3G.3

Keinänen, M., & Kähkönen, K. (2018). Core Project Team As a Management Entity for Construction Projects. In_bo: Ricerche e progetti per il territorio, la citta e l'architettura. Construction Management, 9(13), 208-217.

Fang, C. Y., Vallini, F., Amili, A. E., Tukiainen, A., Lyytikäinen, J., Guina, M., & Fainman, Y. (2018). Development of efficient electrically pumped nanolasers based on InAlGaAs tunnel junction. teoksessa CLEO: Science and Innovations, CLEO_SI 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_SI.2018.SW4Q.4

Soltani, A., Curtze, S., Lahti, J., Järvelä, K., Laurikka, J., Hokka, M., & Kuokkala, V. T. (2018). Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery. teoksessa Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics (Vuosikerta 4, Sivut 19-27). (Conference Proceedings of the Society for Experimental Mechanics). Springer New York LLC. https://doi.org/10.1007/978-3-319-63552-1_4

Tan, L. C., Nancharaiah, Y. V., van Hullebusch, E. D., & Lens, P. N. L. (2018). Effect of elevated nitrate and sulfate concentrations on selenate removal by mesophilic anaerobic granular sludge bed reactors. Environmental Science: Water Research & Technology, 4(2), 303-314 . https://doi.org/10.1039/C7EW00307B

Vazquez Fernandez, N., Isakov, M., Hokka, M., & Kuokkala, V. T. (2018). Effects of adiabatic heating estimated from tensile tests with continuous heating. teoksessa Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics (Vuosikerta 1, Sivut 1-7). (Conference Proceedings of the Society for Experimental Mechanics). Springer New York LLC. https://doi.org/10.1007/978-3-319-62956-8_1

Assanto, G., Perumbilavil, S., Piccardi, A., & Kauranen, M. (2018). Electro-optic steering of random laser emission in liquid crystals. Photonics Letters of Poland, 10(4), 103-105. https://doi.org/10.4302/plp.v10i4.852

Niemelä, P., & Valmari, A. (2018). Elementary math to close the digital skills gap. teoksessa CSEDU 2018 - Proceedings of the 10th International Conference on Computer Supported Education (Vuosikerta 2, Sivut 154-165). SCITEPRESS. https://doi.org/10.5220/0006800201540165

Sheikh, M. U., Hiltunen, K., & Lempiainen, J. (2018). Enhanced outdoor to indoor propagation models and impact of different ray tracing approaches at higher frequencies. Advances in Science, Technology and Engineering Systems, 3(2), 58-68. https://doi.org/10.25046/aj030207

Raunio, J-P., Makela, I., Mäntylä, M., & Ritala, R. (2018). Evaluating the contrast of planar periodic patterns on paper. teoksessa Paper Conference and Trade Show, PaperCon 2018 (Sivut 294-302). TAPPI Press.

Kart, U., Kämäräinen, J. K., Fan, L., & Gabbouj, M. (2018). Evaluation of visual object trackers on equirectangular panorama. teoksessa VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications (Vuosikerta 5, Sivut 25-32). SCITEPRESS. https://doi.org/10.5220/0006526200250032

Niu, L., Suominen, O., M. Aref, M., Mattila, J., Ruiz, E., & Esque, S. (2018). Eye-in-Hand Manipulation for Remote Handling: Experimental Setup. teoksessa International Conference on Robotics and Mechantronics : (ICRoM 2017) (Vuosikerta 320). [012007] (IOP conference series : materials science and engineering). IOP Publishing Ltd.. https://doi.org/10.1088/1757-899X/320/1/012007

Kantola, E., Penttinen, J-P., Leinonen, T., Ranta, S., & Guina, M. (2018). Frequency-doubled VECSEL employing a Volume Bragg Grating for linewidth narrowing. teoksessa CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.17

Kantola, E., Leinonen, T., Rantamäki, A., Guina, M., Sirbu, A., & Iakovlev, V. (2018). Frequency-doubled wafer-fused 638 nm VECSEL with an output power of 5.6 W. teoksessa CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.10

Stankovic, R. S., Astola, J., & Moraga, C. (2018). Gibbs Dyadic Differentiation on Groups - Evolution of the Concept. teoksessa Computer Aided Systems Theory – EUROCAST 2017 - 16th International Conference, Revised Selected Papers (Sivut 229-237). (Lecture Notes in Computer Science; Vuosikerta 10672). Springer Verlag. https://doi.org/10.1007/978-3-319-74727-9_27

Yancheshmeh, F. S., Chen, K., & Kämäräinen, J-K. (2018). Hierarchical deformable part models for heads and tails. teoksessa VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications (Vuosikerta 5, Sivut 45-55). SCITEPRESS. https://doi.org/10.5220/0006532700450055

Mateos, X., Loiko, P., Lamrini, S., Scholle, K., Fuhrberg, P., Suomalainen, S., ... Petrov, V. (2018). Highly-efficient Ho:KY(WO4)2 thin-disk lasers at 2.06 μm. teoksessa Pacific-Rim Laser Damage 2018: Optical Materials for High-Power Lasers [107130J] (Proceedings of SPIE; Vuosikerta 10713). SPIE, IEEE. https://doi.org/10.1117/12.2316822

Zia, N., Viheriälä, J., Koivusalo, E., Aho, A., Suomalainen, S., & Guina, M. (2018). High performance GaSb superluminescent diodes for tunable light source at 2 μm and 2.55 μm. teoksessa CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.28

Fedotov, A., Noronen, T., Rissanen, J., Gumenyuk, R., Petrov, A., Chamorovskii, Y., ... Filippov, V. (2018). High power picosecond MOPA with anisotropic ytterbium-doped tapered double-clad fiber. teoksessa S. Taccheo, JI. Mackenzie, & M. Ferrari (Toimittajat), Proceedings of SPIE : Fiber Lasers and Glass Photonics: Materials through Applications (Vuosikerta 10683). (Proceedings of SPIE; Vuosikerta 10683). SPIE-INT SOC OPTICAL ENGINEERING. https://doi.org/10.1117/12.2307693

Brobbey, K. J., Haapanen, J., Gunell, M., Mäkelä, J. M., Eerola, E., Saarinen, J. J., & Toivakka, M. (2018). High-speed manufacturing of antimicrobial paper. teoksessa Paper Conference and Trade Show, PaperCon 2018 (Sivut 564-566). TAPPI Press.

Karioja, P., Alajoki, T., Cherchi, M., Ollila, J., Harjanne, M., Heinilehto, N., ... Kalinowski, P. (2018). Integrated multi-wavelength mid-IR light source for gas sensing. teoksessa Next-Generation Spectroscopic Technologies XI [106570A] (SPIE Conference Proceedings; Vuosikerta 10657). SPIE, IEEE. https://doi.org/10.1117/12.2305712

Smith, J., Kuokkala, V-T., Seidt, J., & Gilat, A. (2018). Internal Heat Generation in Tension Tests of AISI 316 Using Full-Field Temperature and Strain Measurements. teoksessa Advancement of Optical Methods in Experimental Mechanics, Volume 3. Conference Proceedings of the Society for Experimental Mechanics Series (Vuosikerta 3, Sivut 97-103). ( Conference Proceedings of the Society for Experimental Mechanics). Springer New York LLC. https://doi.org/10.1007/978-3-319-63028-1_16

Palanivel, S., Zhurina, A., Doan, P., Chandraseelan, J. G., Khandelwal, V. K. M., Zubkov, F. I., ... Kandhavelu, M. (2018). In vitro characterization of arylhydrazones of active methylene derivatives. Saudi Pharmaceutical Journal, 26(3), 430-436. https://doi.org/10.1016/j.jsps.2017.12.018

Schelkens, P., Alpaslan, Z., Ebrahimi, T., Pereira, F., Pinheiro, A., Tabus, I., & Chen, Z. (2018). JPEG Pleno: a standard framework for representing and signaling plenoptic modalities. teoksessa SPIE Proceedings Volume 10752: Applications of Digital Image Processing XLI (Vuosikerta 10752). (SPIE Conference Proceedings). SPIE.

Kaarakka, T. E., Ali-Löytty, S., & Huhtanen, M. (2018). Kehittämistutkimus: vuorovaikutteisten Matlab-opetusohjelmien vaikutus minäpystyvyyteen ja oppimistuloksiin yliopistomatematiikassa. FMSERA Journal , 2(1), 67-77.

Ainasoja, A. E., Hietanen, A., Lankinen, J., & Kämäräinen, J-K. (2018). Keyframe-based video summarization with human in the loop. teoksessa VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications (Vuosikerta 4, Sivut 287-296). SCITEPRESS. https://doi.org/10.5220/0006619202870296

Uotila, U., Saari, A., & Junnonen, J-M. (2018). Laser Scanning Tasks of Building Refurbishment Project. teoksessa Proceendings of the 17th International Conference on Computing in Civil and Building Engineering (ICCCBE)

Rosati, P., Fowley, F., Pahl, C., Taibi, D., & Lynn, T. (2018). Making the cloud work for software producers: Linking architecture, operating cost and revenue. teoksessa CLOSER 2018 - Proceedings of the 8th International Conference on Cloud Computing and Services Science (Sivut 364-375). SCITEPRESS. https://doi.org/10.5220/0006679303640375

Kelo, T., Eronen, J., & Rousku, K. (2018). Model for efficient development of security audit criteria. teoksessa Proceedings of the 17th European Conference on Cyber Warfare and Security, ECCWS 2018 (Sivut 244-252). Curran Associates.

Koskinen, K., Scherbak, S., Chervinskii, S., Lipovskii, A., & Kauranen, M. (2018). Non-resonant enhancement of second-harmonic generation from metal nanoislands coated with dielectric layers. teoksessa CLEO: QELS_Fundamental Science 2018 [JTu2A.134] OSA. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.134

Nenonen, S., Salmisto, A., & Petrulaitiene, V. (Toimittajat) (2018). Proceedings of the 1st Transdisciplinary Workplace Research Conference. (Tampereen teknillinen yliopisto. Rakennustekniikan laboratorio. Rakennustuotanto ja -talous. Raportti; Nro 26). Tampere University of Technology. Department of Civil Engineering.

Viro, I. E., & Joutsenlahti, J. (2018). Projektityöskentelyn kehittäminen yläkoulun matematiikan opetuksessa. FMSERA Journal , 2(1), 90-99.

Linna, M., Kannala, J., & Rahtu, E. (2018). Real-time human pose estimation with convolutional neural networks. teoksessa VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications (Vuosikerta 5, Sivut 335-342). SCITEPRESS. https://doi.org/10.5220/0006624403350342

Ryczkowski, P., Närhi, M., Billet, C., Merolla, J. M., Dudley, J. M., & Genty, G. (2018). Real-time measurements of nonlinear instabilities in optical fibers. teoksessa CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.AF2Q.1

Camacho-Morales, R., Bautista, G., Zang, X., Xu, L., Turquet, L., Miroshnichenko, A., ... Kauranen, M. (2018). Resonant harmonic generation in AlGaAs nanoantennas using cylindrical vector beams. teoksessa CLEO: QELS_Fundamental Science 2018 [FF1E.6] The Optical Society; OSA. https://doi.org/10.1364/CLEO_QELS.2018.FF1E.6

Tomberg, T., Vainio, M., Hieta, T., & Halonen, L. (2018). Sub-parts-per-trillion sensitivity in trace gas detection by cantilever-enhanced photo-acoustic spectroscopy. teoksessa CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.ATh1O.8

Kangas, J., & Poutanen, J. (2018). Underpinning Interrelated Factors of Physical, Virtual, and Social Learning Environments. teoksessa ICERI2018 Proceedings (Sivut 8087-8096). (ICERI proceedings). https://doi.org/10.21125/iceri.2018.0459

Bambach, P., Deller, J., Martel, J., Vilenius, E., Goldberg, H., Sorsa, L-I., ... Karatekin, O. (2018). What's inside a rubble pile asteroid? DiSCUS - A tomographic twin radar Cubesat to find out. teoksessa 69th International Astronautical Congress, IAC 2018 (Proceedings of the International Astronautical Congress, IAC).

Myllykoski, T. J., Mattila, P., Ali-Löytty, S., Kaarakka, T., & Viro, E. (2018). Yliopistomatematiikan sähköisten tehtävien ja matemaattisen ajattelun kehittäminen. FMSERA Journal , 2(1), 46-56.

Shao, K., Zhou, B., Wang, G., & Yu, B. (2018). 基于相位旋转的SCMA码本优化方法. Xi Tong Gong Cheng Yu Dian Zi Ji Shu/Systems Engineering and Electronics, 40(10), 2354-2362. https://doi.org/10.3969/j.issn.1001-506X.2018.10.29

Saari, U., Aarikka-Stenroos, L., Boedeker, S., Köppä, L., & Langwaldt, J. (2017). Assessing the usefulness of an early idea development tool among experienced researchers. CERN IdeaSquare Journal of Experimental Innovation, 1(2), 3-8. https://doi.org/10.23726/cij.2017.476

Sommarberg, M., & Mäkinen, S. (2017). Mechanisms of disruptive technological change: Case studies in transformation of traditional industries . teoksessa Proceedings in 2017 Portland International Conference in Management and Engineering (PICMET): (PICMET) 9-13 July 2017 (Sivut 1-10). IEEE. https://doi.org/10.23919/PICMET.2017.8125297

Juuti, P., Katko, T. S., & Rajala, R. (2017). Sata vuotta vesihuoltoa Suomessa. Vesitalous, 58(6), 13-15.

Solomitckii, D., Semkin, V., Naderpour, R., Ometov, A., & Andreev, S. (2017). Comparative evaluation of radio propagation properties at 15 GHz and 60 GHz frequencies. teoksessa 2017 9th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT) (Sivut 91-95). IEEE. https://doi.org/10.1109/ICUMT.2017.8255207

Ometov, A., & Bezzateev, S. (2017). Multi-factor authentication: A survey and challenges in V2X applications. teoksessa 2017 9th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT) (Sivut 129-136). IEEE. https://doi.org/10.1109/ICUMT.2017.8255200

Burkov, A., Matveev, N., Turlikov, A., Bulanov, A., Gahnina, O., & Andreev, S. (2017). Upper bound and approximation of random access throughput over chase combining HARQ. teoksessa 2017 9th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT) (Sivut 143-147). IEEE. https://doi.org/10.1109/ICUMT.2017.8255206

Peng, Z., Richter, P., Leppäkoski, H., & Lohan, E-S. (2017). Analysis of Crowdsensed WiFi Fingerprints for Indoor Localization. teoksessa Proceedings of the 21st Conference of Open Innovations Association FRUCT (Sivut 268-277). Helsinki, Finland: FRUCT.

Ma, S., Ukkonen, L., Sydänheimo, L., & Björninen, T. (2017). Wearable e-textile split ring passive UHF RFID tag: Body-worn performance evaluation. teoksessa 2017 IEEE Asia Pacific Microwave Conference (APMC) IEEE.

Veronese, A., Racca, M., Pieters, R., & Kyrki, V. (2017). Probabilistic Mapping of Human Visual Attention from Head Pose Estimation. Frontiers in Robotics and AI, [53]. https://doi.org/10.3389/frobt.2017.00053

Khorramdel, B., Kraft, T. M., & Mäntysalo, M. (2017). Inkjet printed metallic micropillars for bare die flip-chip bonding. Flexible and Printed Electronics, 2(4), 045005. https://doi.org/10.1088/2058-8585/aa9171

Salo, J., Huttunen, P., & Vinha, J. (2017). Alipaineistetun tuulettuvan ryömintätilan rakennusfysikaaliset FEM-simuloinnit. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24-26.10.2017, Tampere (Vuosikerta 2, Sivut 413-422). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka. ). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Vänttinen, K., Tuominen, E., & Vinha, J. (2017). Betonin kosteusteknisten materiaaliominaisuuksien määrittäminen. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere (Vuosikerta 2, Sivut 461-470). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Annila, P., Lahdensivu, J., Suonketo, J., Pentti, M., Laukkarinen, A., & Vinha, J. (2017). Kosteusvaurioiden vakavuus kuntien rakennuksissa. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere (Vuosikerta 1, Sivut 135-140). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Ruusala, A., & Vinha, J. (2017). Koulujen ja päiväkotien laskettu ja toteutunut energiankulutus. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere (Vuosikerta 1, Sivut 267-274). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Sekki, P., Korhonen, L., & Vinha, J. (2017). Kuorielementtien kuivumisen mallintaminen hydrataation huomioivalla FEM-laskennalla. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere (Vuosikerta 2, Sivut 399-405). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka. ). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Jokisalo, J., Sankelo, P., Sirén, K., & Vinha, J. (2017). Kustannusoptimaaliset energiakorjaus- ja uusiutuvan energian tuotannon ratkaisut kunnallisissa palvelurakennuksissa. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere (Vuosikerta 1, Sivut 287-292). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Laukkarinen, A., Heiskanen, R., & Vinha, J. (2017). Maanvastaisten seinien lämpö- ja kosteustekninen toiminta. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere (Vuosikerta 1, Sivut 71-76). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Kauppinen, A., Kiviste, M., Pirhonen, J., & Vinha, J. (2017). Paine-erot Pirkanmaan ja Helsingin julkisissa palvelurakennuksissa. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24-26.10.2017, Tampere (Vuosikerta 1, Sivut 215-221). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Laukkarinen, A., Musakka, S., Penttilä, O., Teriö, O., & Vinha, J. (2017). Puukerrostalon työmaavaiheen lämpö- ja kosteusolosuhteiden mittaukset. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere (Vuosikerta 1, Sivut 167-172). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Teriö, O., Penttilä, O., Laukkarinen, A., Musakka, S., & Vinha, J. (2017). Puukerrostalorakentamisen kosteudenhallinta. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere (Vuosikerta 1, Sivut 173-178). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Tuominen, E., Vainio, M., & Vinha, J. (2017). Suomessa markkinoilla olevien kalsiumsilikaattilevyjen rakennusfysikaaliset materiaaliominaisuudet. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere (Vuosikerta 2, Sivut 455-460). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka. ). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Huttunen, P., Rantala, J., & Vinha, J. (2017). Suuren lämmöneristämättömän maanvastaisen alapohjan vaikutus rakennuksen energiankulutukseen. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24-26.10.2017, Tampere (Vuosikerta 1, Sivut 335-342). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Viheriäkoski, T., Kärjä, E., Gärtner, R., & Tamminen, P. (2017). Electrostatic discharge characteristics of conductive polymers. teoksessa Electrical Overstress/Electrostatic Discharge Symposium Proceedings 2017, EOS/ESD 2017 ESD Association.

Viheriäkoski, T., Jokinen, V., Smallwood, J., Korpipää, A., & Tamminen, P. (2017). Qualification challenges of footwear and flooring systems. teoksessa Electrical Overstress/Electrostatic Discharge Symposium Proceedings 2017, EOS/ESD 2017 ESD Association.

Müller, P., Lekkala, J., Ali-Löytty, S., & Piche, R. (2017). Indoor Localisation using Aroma Fingerprints: A First Sniff. teoksessa 2017 14th Workshop on Positioning, Navigation and Communications (WPNC) Bremen, Germany: IEEE. https://doi.org/10.1109/WPNC.2017.8250046

Pakkala, T., Lahdensivu, J., Köliö, A., & Annila, P. (2017). Julkisivujen ja parvekkeiden talvikorjausohje. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut, 24-26.10.2017, Tampere (Sivut 179-184). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Kiili, K., Ojansuu, K., Lindstedt, A., & Ninaus, M. (2017). Rational Number Knowledge Assessment and Training With a Game Competition. teoksessa Proceedings of The 11th European Conference on Game-Based Learning ECGBL 2017 (Sivut 320-327). Academic Conferences and Publishing International Limited.

Hlavatý, I., Kozák, J., Krejci, L., Samardzic, I., & Tuominen, J. (2017). The effect of tungsten carbide particles content in a weld deposit on its abrasion resistance. Technical Gazette - Technicki vjesnik, 24(5), 1345-1349. https://doi.org/10.17559/TV-20160503085356

Kraft, T., Berger, P., & Lupo, D. (2017). Printed and organic diodes: devices, circuits and applications. Flexible and Printed Electronics, 2(3), [033001]. https://doi.org/10.1088/2058-8585/aa8ac3

Laitinen, A., Santa-aho, S., Lukinmaa, H., Suominen, L., & Vippola, M. (2017). Barkhausen noise Potcore sensor simulations with Comsol. teoksessa 12th International Conference on Barkhausen Noise and Micromagnetic Testing (Sivut 97-107). ICBM.

Sorsa, A., Santa-aho, S., Aylott, C., Shaw, B., Vippola, M., & Leiviskä, K. (2017). Case depth prediction of nitrided components. teoksessa 12th International Conference on Barkhausen Noise and Micromagnetic Testing (Sivut 65-72). ICBM.

Virkki, J., Chen, X., Björninen, T., & Ukkonen, L. (2017). Embroidered antennas and antenna-electronics interfaces for wearable RFID tags. teoksessa IMWS-AMP 2017 International Microwave Workshop Series on Advanced Materials and Processes IEEE. https://doi.org/10.1109/IMWS-AMP.2017.8247437

Suominen, A. H., & Mäenpää, S. (2017). Knowledge sharing in knowledge collectivity: case digitalization in industrial network. teoksessa F. Marimon, M. Mas-Machuca, J. Berbegal-Mirabent, & R. Bastida (Toimittajat), Proceedings of the 18th European Conference on Knowledge Management ECKM 2017: 7-8 September 2017, Barcelona, Spain (Sivut 956-963). Academic Conferences and Publishing International.

Mohamed Bahrudeen, M., & S. Ribeiro, A. (2017). Tuning extrinsic noise effects on a small genetic circuit. teoksessa Proceedings of ECAL 2017: 14th European Conference on Artificial Life Massachusetts Institute of Technology. https://doi.org/10.7551/ecal_a_075

Munir, M. W., Shahid, N., Omair, S. M., Munir, G., & Ul Haque, M. Z. (2017). Comparative investigation of remote tracking devices for aging care. INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY, 9(3), 261-266. https://doi.org/10.1007/s41870-017-0034-7

Kähkönen, K., & Brandt, J. (2017). Quality evaluation on of contractor’s schedule for building renovation. teoksessa A. Ciribini , G. Alaimo , P. Capone , B. Daniotti , G. Dell’Osso , & M. Nicolella (Toimittajat), Re‐shaping the construction industry (Sivut 175-184). ISTeA Italian Society of Science, Technology and Engineering of Architecture; Maggioli Editore.

Mäntysalo, M., Vuorinen, T., Jeyhani, V., & Vehkaoja, A. (2017). Printed soft-electronics for remote body monitoring. teoksessa Hybrid Memory Devices and Printed Circuits 2017: SPIE Organic Photonics + Electronics | 6-10 August 2017 (SPIE Conference Proceedings; Vuosikerta 10366). SPIE. https://doi.org/10.1117/12.2275606

Dang, D., & Pekkola, S. (2017). Enterprise architecture and organizational reform: a project debrief. teoksessa Proceedings the 21st Pacific Asian Conference on Information Systems 2017 (PACIS’2017): Langkawi, Malay, 16-20 July, 2017 Association for Information Systems AIS.

Militano, L., Orsino, A., Araniti, G., & Iera, A. (2017). NB-IoT for D2D-enhanced content uploading with social trustworthiness in 5G systems. Future Internet, 9(3), [31]. https://doi.org/10.3390/fi9030031

Saari, M., Mäkinen, T., & Linna, P. (2017). Applying third-party moocs in programming education: a case study. teoksessa 9th International Conference on Education and New Learning Technologies: 3-5 July, 2017 Barcelona, Spain (Sivut 53-59). Barcelona, Spain: IATED. https://doi.org/10.21125/edulearn.2017.1014

Jussila, J., Menon, K., Gupta, J., & Kärkkäinen, H. (2017). Who is who in Big Social Data? A Bibliographic Network Analysis Study. teoksessa Proceedings of the 4th European Conference on Social Media ECSM 2017 (Vuosikerta 4, Sivut 161-169). Reading, UK: Academic Conferences and Publishing International Limited.

Multisilta, J., & Niemi, H. (2017). Tools, pedagogical models, and best practices for digital storytelling. teoksessa M. Khosrow-Pour (Toimittaja), Encyclopedia of information science and technology (4th toim.). IGI Global.

Ryczkowski, P., Närhi, M., Billet, C., Merolla, J. -M., Genty, G., & Dudley, J. M. (2017). Real-time measurements of dissipative solitons in a mode-locked fiber laser. arXiv eprint.

Filanovsky, I., & Tchamov, N. (2017). Maximally Flat Property and Bandwidth Enhancing by Transfer Function Zeroes IEEE-NewCAS France. teoksessa 2017 15th IEEE International New Circuits and Systems Conference (NEWCAS) IEEE. https://doi.org/10.1109/NEWCAS.2017.8010113

Riihonen, T., Korpi, D., Rantula, O., & Valkama, M. (2017). On the prospects of full-duplex military radios. teoksessa 2017 International Conference on Military Communications and Information Systems, ICMCIS 2017 IEEE. https://doi.org/10.1109/ICMCIS.2017.7956490

Rytöluoto, I., Ritamäki, M., Gitsas, A., Pasanen, S., & Lahti, K. (2017). Morphology Development, Structure and Dielectric Properties of Biaxially Oriented Polypropylene. teoksessa 25th Nordic Insulation Symposium on Materials, Components and Diagnostics (Proceeding of the Nordic Insulation Symposium; Nro 25).

Palvalin, M., Vuori, V., & Helander, N. (2017). Knowledge transfer and work productivity. teoksessa JC. Spender, G. Schiuma, & T. Gavrilova (Toimittajat), Proceedings of 12th International Forum on Knowledge Asset Dynamics: St. Petersburgh, Russia 7-9 June 2017 (Sivut 1120-1134). (Proceedings IFKAD).

Konttinen, J., Kramb, J., DeMartini, N., & Gomez-Barea, A. (2017). The role of inorganics in modelling of biomass gasification. teoksessa L. Ek, H. Ernrooth, N. Scarlat, A. Grassi, & P. Helm (Toimittajat), EUBCE 2017 Online Conference Proceedings (Sivut 443-447). (European biomass conference and exhibition proceedings). ETA-Florence Renewable Energies. https://doi.org/10.5071/25thEUBCE2017-2BO.6.4

Kiilakoski, J., Lukac, F., Koivuluoto, H., & Vuoristo, P. (2017). Cavitation wear characteristics of Al2O3-ZrO2-ceramic coatings deposited by APS and HVOF -processes. teoksessa Internationl Thermal Spray Conference ITSC 2017, Conference Proceedings: June 7-9, 2017, Düsseldorf, Germany. (Vuosikerta 336, Sivut 928-933). (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V.). Düsseldorf: DVS Media GmbH.

Laihonen, H., Sillanpää, V., & Vuolle, M. (2017). Managing intellectual liabilities by service recovery. teoksessa G. Schiuma, JC. Spender, & T. Garvilova (Toimittajat), Proceedings IFKAD 2017, 12th International Forum on Knowledge Asset Dynamics: Knowledge Management in the 21st Century: Resilience, Crativity and Co-creation, 7-9 Jun 2017, St. Petersburg, Russia. (Sivut 1570-1583). (Proceedings IFKAD). IKAM - Insitute of Knowledge Asset Management.

Jussila, J. J., Mustafee, N., Aramo-Immonen, H., Menon, K., Hajikhani, A., & Helander, N. (2017). A bibliometric study on authorship trends and research themes in knowledge management literature. teoksessa 12th International Forum on Knowledge Asset Dynamics, St. Petersburg, Russia 7-9 June 2017: Knowledge Management in the 21th Century: Resilience, Creativity and Co-creation (Vuosikerta 12, Sivut 389-397). St. Petersburg, Russia.

Aramo-Immonen, H., Vartio, M., & Jussila, J. (2017). If you know social media, you see opportunities…. teoksessa 12th International Forum on Knowledge Asset Dynamics: Knowledge Management in the 21th Century: Resilience, Creativity and Co-creation (Vuosikerta 12, Sivut 575-584)

Myllärniemi, J., Pekkola, S., & Helander, N. (2017). Lessons for data-based value creation. teoksessa 12th International Forum on Knowledge Asset Dynamics, IFKAD 2017 (Sivut 398-407). (Proceedings IFKAD).

Väyrynen, H., & Manu, M. (2017). Why don't one maximizes database utilization in product and service development in manufacturing? teoksessa Proceedings of the 12th International Forum on Knowledge Asset Dynamics 2017: St. Petersburg, Russia, 7-9 June 2017 (Sivut 93-105). (Proceedings IFKAD). St. Petersburg, Russia .

Ketonen-Oksi, S., & Jalonen, H. (2017). Advocator, jester, spokesperson, provocateur and boundary spanner? Exploring different communication styles at twitter. teoksessa 12th Conference proceedings of IFKAD2017: St.Petersburg, Russia, 7-9 June 2017 (Proceedings IFKAD).

Helander, N., Sillanpää, V., Vuori, V., & Uusitalo, O. (2017). Customer Perceived Value - A Key in Marketing of Integrated Solutions. teoksessa A. Kavoura, D. Sakas, & P. Tomaras (Toimittajat), The 5th International Conference on Strategic Innovative Marketing., At Athens, Greece, Volume: 5: September 23-26, 2016 (Sivut 37-42). (Springer Proceedings in Business and Economics). Springer. https://doi.org/10.1007/978-3-319-56288-9_6

Jussila, J., Vuori, V., Okkonen, J., & Helander, N. (2017). Reliability and Perceived Value of Sentiment Analysis for Twitter Data. teoksessa A. Kavoura, D. Sakas, & P. Tomaras (Toimittajat), 5th International Conference on Strategic Innovative Marketing, At Athens, Greece,: September 23-26, 2016 (Sivut 43-48). (Springer Proceedings in Business and Economics). Springer. https://doi.org/10.1007/978-3-319-56288-9_7

Jussila, J., Boedeker, M., Jalonen, H., & Helander, N. (2017). Social Media Analytics Empowering Customer Experience Insight. teoksessa A. Kavoura, D. Sakas, & P. Tomaras (Toimittajat), 5th International Conference on Strategic Innovative Marketing, Volume: 5: September 23-26, 2016 At Athens, Greece (Sivut 25-30). (Springer Proceedings in Business and Economics). Springer.

Jaakkola, H., & Thalheim, B. (2017). Culture-Aware Web Information Systems in Dependence of Context. teoksessa V. Sornlertlamvanich, P. Chawakitchareon, A. Hansuebsai, C. Koopipat, Y. Kiyoki, H. Jaakkola, B. Thalheim, ... N. Yoshida (Toimittajat), The Proceedings of the 27th International Conference on Information Modelling and Knowledge Bases (Sivut 309-331). Sirindhorn International Institute of Technology, Thammasat University, Thailand.

Silwal, B., Rasilo, P., Belahcen, A., & Arkkio, A. (2017). Influence of the rotor eccentricity on the torque of a cage induction machine. Archives of Electrical Engineering, 66(2), 383-396. https://doi.org/10.1515/aee-2017-0029

Vuorinen, L., & Martinsuo, M. (2017). Managing different types of changes during the lifecycle of a complex delivery project. teoksessa The 2017 European Academy of Management (EURAM) Conference: Glasgow, Scotland, 21-24 June, 2017. EURAM.

Lehtoranta, K., Murtonen, T., Vesala, H., Koponen, P., Alanen, J., Simonen, P., ... Korhonen, S. (2017). Natural Gas Engine Emission Reduction by Catalysts. Emission Control Science and Technology, 3(2), 142-152. https://doi.org/10.1007/s40825-016-0057-8

Eteläaho, A., Soini, J., Jaakkola, H., & Mattila, A-L. (2017). Visual Data Mining in Software Repositories: A Survey. teoksessa V. Sornlertlamvanich, P. Chawakitchareon, A. Hansuebsai, C. Koopipat, Y. Kiyoki, H. Jaakkola, B. Thalheim, ... N. Yoshida (Toimittajat), The Proceedings of the 27th International Conference on Information Modelling and Knowledge Bases (Sivut 367-385). Sirindhorn International Institute of Technology, Thammasat University, Thailand.

Virtanen, J., Kamppi, A., Pekkarinen, E., Määttä, J-M., Järvinen, J., Matilainen, L. J., ... Hämäläinen, T. (2017). Kactus2: A graphical EDA tool built on the IP-XACT standard. The Journal of Open Source Software, 2(13), 1. https://doi.org/10.21105/joss.00151

Rojas, V., Martinez, F., Bernede, J. C., Guenadez, L. C., Efimov, A., & Lemmetyinen, H. (2017). Alkyl thiophene vinylene electropolymerization in C8mimPF6, potential use in solar cells. Materials Sciences and Applications, 8(5), 405-417. https://doi.org/10.4236/msa.2017.85013

Juuti, P. S. (2017). Editorial: Information to support decision-making. Ympäristöhistoria: Finnish Journal of Environmental History, 2017(1), 5-6.

Juuti, P. S., Kurki, V., & Rajala, R. (2017). Local narratives in the long term water conflicts: Case of Turku Region in Finland. Ympäristöhistoria: Finnish Journal of Environmental History, 2017(1), 39-49.

Valmari, A., & Hella, L. (2017). The logics taught and used at high schools are not the same. teoksessa J. Karhumäki, Y. Matiyasevich, & A. Saarela (Toimittajat), Proceedings of the Fourth Russian Finnish Symposium on Discrete Mathematics (Sivut 172-186). (TUCS Lecture Notes; Nro 26). Turku: TURKU CENTRE FOR COMPUTER SCIENCE.

Juuti, P. (2017). Vesi, ongelma ennen ja nyt? Ympäristöhistoria: Finnish Journal of Environmental History, 2017(1), 54-65.

Asp, O., & Laaksonen, A. (2017). Instrumentation and monitoring of large-span culvert built under a railway, in Finland. teoksessa A. Madaj, & I. Jankowiak (Toimittajat), Archives of Institute of Civil Engineering: 3rd European Conference on Buried Flexible Steel Structures, Rydzyna, Poland, 24-25 April 2017 (23 toim., Vuosikerta 2017, Sivut 53-60). Poznan: Wydawnictwo Politechniki Poznanskiej. https://doi.org/10.21008/j.1897-4007.2017.23.05

Zare, A., Sreedhar, K. K., Vadakital, V. K. M., Aminlou, A., Hannuksela, M. M., & Gabbouj, M. (2017). HEVC-compliant viewport-adaptive streaming of stereoscopic panoramic video. teoksessa 2016 Picture Coding Symposium, PCS 2016 IEEE. https://doi.org/10.1109/PCS.2016.7906401

Olshannikova, E., Ometov, A., Anagnostaki, T., Hasan, N., Kuketaeva, A., Ahtinen, A., ... Koucheryavy, Y. (2017). Towards better knowledge work experiences with new Ambient workspace: Concept and prototype. teoksessa Proceedings of the 19th Conference of Open Innovations Association, FRUCT 2016 (Sivut 173-181). IEEE COMPUTER SOCIETY PRESS. https://doi.org/10.23919/FRUCT.2016.7892198

Teymouri, S., Calejo, M. T., Hiltunen, M., Sorkio, A. E., Juuti-Uusitalo, K., Skottman, H., & Kellomäki, M. (2017). Collagen-immobilized polyimide membranes for retinal pigment epithelial cell adherence and proliferation. Cogent Chemistry, 3(1). https://doi.org/10.1080/23312009.2017.1292593

Brechet, N., Ginestet, G., Moradi, E., Ukkonen, L., Torres, J., Björninen, T., & Virkki, J. (2017). Cost- and time-effective sewing patterns for embroidered passive UHF RFID tags. teoksessa Proceedings of IEEE 2017 International Workshop on Antenna Technology (Sivut 30-33). IEEE. https://doi.org/10.1109/IWAT.2017.7915289

Karhu, M., Lagerbom, J., Kivikytö-Reponen, P., Ismailov, A., & Levänen, E. (2017). Reaction heat utilization in aluminosilicate-based ceramics synthesis and sintering. Journal of Ceramic Science and Technology, 8(1), 101-112. https://doi.org/10.4416/JCST2016-00094

Khan, M. W. A., Björninen, T., Sydänheimo, L., & Ukkonen, L. (2017). Wirelessly powered implantable system for wireless long-term monitoring of intracranial pressure. teoksessa Proceedings of IEEE 2017 International Workshop on Antenna Technology (Sivut 122-124). IEEE. https://doi.org/10.1109/IWAT.2017.7915334

Singh, A., Vihinen, J., Frankberg, E., Hyvärinen, L., Honkanen, M., & Levänen, E. (2017). Effect of Laser Power on Yield of TiO2 Nanoparticles Synthesized by Pulsed Laser Ablation in Water. Journal of Ceramic Science and Technology, 8(1), 39-43. https://doi.org/10.4416/JCST2016-00071

Viheriälä, J., Aho, A., Virtanen, H., Koskinen, M., Dumitrescu, M., & Guina, M. (2017). 1180 nm GaInNAs quantum well based high power DBR laser diodes. teoksessa M. S. Zediker (Toimittaja), High-Power Diode Laser Technology XV [100860K] (Proceedings of SPIE; Vuosikerta 10086). SPIE. https://doi.org/10.1117/12.2251317

Li, L., Ghazi, A., Boutellier, J., Anttila, L., Valkama, M., & Bhattacharyya, S. S. (2017). Evolutionary multiobjective optimization for adaptive dataflow-based digital predistortion architectures. EAI Endorsed Transactions on Cognitive Communications, 17(10), [e3]. https://doi.org/10.4108/eai.23-2-2017.152187

Karioja, P., Alajoki, T., Cherchi, M., Ollila, J., Harjanne, M., Heinilehto, N., ... Kalinowski, P. (2017). Multi-wavelength mid-IR light source for gas sensing. teoksessa Proc. SPIE 10110: Photonic Instrumentation Engineering IV (Vuosikerta 10110). [101100P] (Proceedings of SPIE; Vuosikerta 10110). SPIE. https://doi.org/10.1117/12.2249126

Tiira, J., Radevici, I., Haggren, T., Hakkarainen, T., Kivisaari, P., Lyytikäinen, J., ... Oksanen, J. (2017). Intracavity double diode structures with GaInP barrier layers for thermophotonic cooling. teoksessa Proc. SPIE 10121: Optical and Electronic Cooling of Solids II (Vuosikerta 10121). [1012109] (Proceedings of SPIE; Vuosikerta 10121). SPIE. https://doi.org/10.1117/12.2250843

Sislian, R., da Silva, F. V., Gedraite, R., Jokinen, H., & Rajan, D. K. (2017). The use of mathematical modeling for the development of a low cost fuzzy gain schedule neutralization control system. teoksessa Transactions on Engineering Technologies: World Congress on Engineering and Computer Science 2015 (Sivut 525-539). Springer Singapore. https://doi.org/10.1007/978-981-10-2717-8_37

Murayama, M., Oguro, D., Kikuchi, H., Huttunen, H., Ho, Y. S., & Shin, J. (2017). Color-distribution similarity by information theoretic divergence for color images. teoksessa 2016 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2016 IEEE. https://doi.org/10.1109/APSIPA.2016.7820681

Matikainen, V., Rubio, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdková, S., & Vuoristo, P. (2017). Cavitation erosion, slurry erosion and solid particle erosion performance of metal matrix composite (MMC) coatings sprayed with modern high velocity thermal spray processes. teoksessa Materials Science and Technology Conference and Exhibition 2017, MS and T 2017: October 8-12, 2017, Pittsburgh, Pennsylvania USA (Vuosikerta 2, Sivut 1161-1163). Association for Iron and Steel Technology, AISTECH.

Suokas, E. (2017). Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating. teoksessa 16th TAPPI European PLACE Conference 2017 (Sivut 529-544). TAPPI Press.

Lahti, J., Kamppuri, T., & Kuusipalo, J. (2017). Novel bio-based materials for active and intelligent packaging. teoksessa 16th TAPPI European PLACE Conference 2017 TAPPI Press.

Lahti, J., Kuusipalo, J., & Auvinen, S. (2017). Novel equipment to simulate hot air heat sealability of packaging materials. teoksessa 16th TAPPI European PLACE Conference 2017 (Sivut 237-248). TAPPI Press.

Kuusipalo, J., & Lahti, J. (2017). Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland. teoksessa 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017 (Vuosikerta May-2017). TAPPI Press.

Lenarduzzi, V., Stan, A. C., Taibi, D., Tosi, D., & Venters, G. (2017). A dynamical quality model to continuously monitor software maintenance. teoksessa Proceedings of the 11th European Conference on Information Systems Management, ECISM 2017 (Sivut 168-178). Academic Conferences and Publishing International Limited.

Zare, M., Neeli-Venkata, R., Martins, L., Peltonen, S., Ruotsalainen, U., & Ribeiro, A. S. (2017). Automatic Classification of Z-ring Formation Stages at the Single Cell Level in Escherichia Coli by Machine Learning. teoksessa M. Silveira, A. Fred, H. Gamboa, & M. Vaz (Toimittajat), Proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies, Vol 2: Bioimaging (Sivut 72-76). SCITEPRESS.

Myllärniemi, J., Helander, N., Hellsten, P., Mahlamäki, T., & Repo, S. (2017). Business intelligence approach – a practical tool for competence based curriculum development. teoksessa EDULEARN17 Proceedings. 9th International Conference on Education and New Learning Technologies: 3-5 July, 2017, Barcelona, Spain (Sivut 6387-6393). IATED. https://doi.org/10.21125/edulearn.2017.2451

Pöllänen, M., Utriainen, R., & Viri, R. (2017). Challenges in the paradigm change from mobility as a self-service to mobility as a service. teoksessa Conference Proceedings 1st International Conference of Mobility as a Service: ICoMaaS, Tampere 28.-29.11.2017 (Sivut 246-265). Tampere University of Technology.

López Baeza, J., Cerrone, D., & Männigo, K. (2017). Comparing two methods for Urban Complexity calculation using Shannon-Wiener index. teoksessa Comparing two methods for Urban Complexity calculation using Shannon-Wiener index (Sivut 369-378). (WIT Transactions on Ecology and The Environment; Vuosikerta 226). WIT Press. https://doi.org/10.2495/SDP170321

Minaev, G., Visa, A., & Piche, R. (2017). Comprehensive survey of similarity measures for ranked based location fingerprinting algorithm. teoksessa Indoor Positioning and Indoor Navigation (IPIN), 2017 International Conference on IEEE. https://doi.org/10.1109/IPIN.2017.8115922

Katkovnik, V., Shevkunov, I., Petrov, N. V., & Egiazarian, K. (2017). Computational wavelength resolution for in-line lensless holography: Phase-coded diffraction patterns and wavefront group-sparsity. teoksessa Digital Optical Technologies 2017 [1033509] (Proceedings of SPIE; Vuosikerta 10335). SPIE. https://doi.org/10.1117/12.2269327

Cakir, E., & Virtanen, T. (2017). Convolutional Recurrent Neural Networks for Rare Sound Event Detection. teoksessa Proceedings of the Detection and Classification of Acoustic Scenes and Events 2017 Workshop (DCASE2017) (Sivut 27-31). Tampere University of Technology. Laboratory of Signal Processing.

Stoykova, E., Nazarova, D., Berberova, N., Gotchev, A., Ivanov, B., & Mateev, G. (2017). Dynamic laser speckle metrology with binarization of speckle patterns. teoksessa 19th International Conference and School on Quantum Electronics: Laser Physics and Applications [102260R] (Proceedings of SPIE; Vuosikerta 10226). SPIE. https://doi.org/10.1117/12.2262330

Christiansen, J., Birkinshaw, J., Le Massaon, P., & Mäkinen, S. (2017). Editorial: Experiments in an Organisational Context. CERN IdeaSquare Journal of Experimental Innovation, 1(2). https://doi.org/10.23726/cij.2017.684

Partanen, T., Niemelä, P., Mannila, L., & Poranen, T. (2017). Educating Computer Science Educators Online - A Racket MOOC for Elementary Math Teachers of Finland. teoksessa Proceedings of the 9th International Conference on Computer Supported Education (Sivut 47-58). SCITEPRESS - Science and Technology Publications. https://doi.org/10.5220/0006257800470058

Munnukka, J., Karjaluoto, H., Mahlamäki, T., & Hokkanen, V. (2017). Effects of Social Media on Consumers' Sports Brand Experiences and Loyalty. teoksessa M. Stieler (Toimittaja), Creating Marketing Magic and Innovative Future Marketing Trends: Proceedings of the 2016 Academy of Marketing Science (AMS) Annual Conference (Sivut 1051-1064). ( Developments in Marketing Science: Proceedings of the Academy of Marketing Science). Springer International Publishing. https://doi.org/10.1007/978-3-319-45596-9_194

Andersson, T., Boedeker, M., & Vuori, V. (2017). Emotion-Gauge: Analyzing affective experiences in B2B customer journeys. teoksessa A. Kavoura, D. Sakas, & P. Tomaras (Toimittajat), Strategic Innovative Marketing : 5th IC-SIM, Athens, Greece, September 23-26, 2016 (Sivut 31-36). (Springer Proceedings in Business and Economics). Springer.

Sorri, J., Heljo, J., Uotila, U., & Ruusala, A. (2017). Energiatehokkuusinformaatio palvelurakennuksissa. teoksessa Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut : 24.-26.10.2017, Tampere (Vuosikerta 1, Sivut 325-330). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.). Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Heljo, J., Sorri, J., & Harsia, P. (2017). Energiatehokkuus on entistä enemmän sähkötehon hallintaa. teoksessa J. Vinha, & H. Kivioja (Toimittajat), Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere (Vuosikerta 1, Sivut 281-286). (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.). Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Kelo, T., & Eronen, J. (2017). Experiences from development of security audit criteria. teoksessa Proceedings of the 16th European Conference on Cyber Warfare and Security, ECCWS 2017 (Sivut 208-215). TAPPI Press; Curran Associates, Inc.

Tosi, D., Lenarduzzi, V., Morasca, S., & Taibi, D. (2017). Experimenting traditional and modern reliability models in a 3-years european software project. teoksessa Proceedings of the 11th European Conference on Information Systems Management, ECISM 2017 (Sivut 304-314). Academic Conferences and Publishing International Limited.

Perttula, A. (2017). Eye tracking studies focusing on mathematics: a literature review. teoksessa INTED2017. The 11th annual International Technology, Education and Development Conference: Valencia, 6th - 8th of March, 2017. [2166-2173] IATED Academy. https://doi.org/10.21125/inted.2017.0639

Kiili, K. (2017). From theories to game mechanics: Developing a game for training rational numbers. teoksessa Proceedings of the 11th European Conference on Games Based Learning, ECGBL 2017 (Sivut 328-334). Academic Conferences and Publishing International Limited.

Perttula, A., & Tuomi, P. (2017). Gamification at School. teoksessa EDULEARN17: The 9th International Conference on Education and New Learning Technologies (Sivut 9334-9340) https://doi.org/10.21125/edulearn.2017.0756

Nommeots-Nomm, A., & Massera, J. (2017). Glass and Glass-Ceramic Scaffolds: Manufacturing Methods and the Impact of Crystallization on In-Vitro Dissolution. teoksessa Scaffolds in Tissue Engineering - Materials, Technologies and Clinical Applications InTech Open Access Publisher. https://doi.org/10.5772/intechopen.70242

Mokhtarian, H., Coatanea, E., Paris, H., & Vihinen, J. (2017). Identification of fundamental requirements for ideal metamodeling framework in additive manufacturing. teoksessa J. Aaltonen, R. Virkkunen, K. T. Koskinen, & R. Kuivanen (Toimittajat), Proceedings of the 2nd Annual SMACC Research Seminar 2017 (Sivut 29-31)

Meriläinen, K., Vuori, V., & Helander, N. (2017). Inter-organizational knowledge sharing barriers within an sme network: a case study. teoksessa Proceedings of the 18th European Conference on Knowledge Management: Barcelona, Spain, 7-8 September 2017 (Sivut 690-697). Reading, UK: Academic Conferences and Publishing International Limited.

Cenev, Z., Zhang, H., Sariola, V., Rahikkala, A., Liu, D., Santos, H. A., & Zhou, Q. (2017). Manipulating Superparamagnetic Microparticles with an Electromagnetic Needle. Advanced Materials Technologies, 3(1), [1700177]. https://doi.org/10.1002/admt.201700177

Begishev, V., Samuylov, A., Moltchanov, D., & Samouylov, K. (2017). Modeling the process of dynamic resource sharing between LTE and NB-IoT services. teoksessa Distributed Computer and Communication Networks - 20th International Conference, DCCN 2017, Proceedings (Sivut 1-12). (Communications in Computer and Information Science; Vuosikerta 700). Springer Verlag. https://doi.org/10.1007/978-3-319-66836-9_1

Gomez Casco, D., Lohan, E-S., Lopez-Salcedo, J. A., & Seco-Granados, G. (2017). Multilag Frequency Estimation for High-Order BOC Signals in the Acquisition Stage. teoksessa 2016 8th ESA Workshop on Satellite Navigation Technologies and European Workshop on GNSS Signals and Signal Processing (NAVITEC) IEEE. https://doi.org/10.1109/NAVITEC.2016.7849325

Mahlamäki, T., Valkeinen, T., Myllärniemi, J., Hellsten, P., & Repo, S. (2017). Personality's effect on peer assessment ability in case method context. teoksessa EDULEARN17 Proceedings. 9th International Conference on Education and New Learning Technologies: 3-5 July, 2017, Barcelona, Spain (Sivut 6401-6405). (Edulearn proceedings). IATED. https://doi.org/10.21125/edulearn.2017.2455

Okkonen, J., & Vuori, V. (2017). Perspectives on tools and applications supporting co-creation in knowledge work. teoksessa Proceedings of the 12th International Forum on Knowledge Asset Dynamics 2017: 7-9 Jun. 2017, St. Petersburg, Russia (Sivut 369-376). (Proceedings IFKAD).

Hakkarainen, T., Leahu, G., Petronijevic, E., Belardini, A., Centini, M., Li Voti, R., ... Sibilia, C. (2017). Photo-acoustic Spectroscopy of Resonant Absorption in III-V Semiconductor Nanowires. teoksessa CLEO: Applications and Technology 2017: San Jose, California United States 14–19 May 2017 [JTh2A.48] The Optical Society; OSA. https://doi.org/10.1364/CLEO_AT.2017.JTh2A.48

Filippov, V., Vorotynskii, A., Noronen, T., Gumenyuk, R., Chamorovskii, Y., & Golant, K. (2017). Picosecond MOPA with ytterbium doped tapered double clad fiber. teoksessa Fiber Lasers XIV: Technology and Systems (Vuosikerta 10083). [100831H] (Proceedings of SPIE; Nro 10083). SPIE. https://doi.org/10.1117/12.2252006

Messo, T., Luhtala, R., Roinila, T., Yang, D., Wang, X., & Blaabjerg, F. (2017). Real-Time Impedance-Based Stability Assessment of Grid Converter Interactions. teoksessa IEEE Workshop on Control and Modeling for Power Electronics https://doi.org/10.1109/COMPEL.2017.8013384

Ketonen-Oksi, S. (2017). Reinventing organisational creativity and innovation through adapting a service-based working culture. teoksessa G. Schiuma, & A. Lerro (Toimittajat), Integrating arts and creativity into business practice (Sivut 1-20). IGI Global. https://doi.org/10.4018/978-1-5225-2050-4

Utriainen, R., & Pöllänen, M. (2017). Review on mobility as a service in scientific literature. teoksessa Conference Proceedings 1st International Conference on Mobility as a Service: ICoMaaS, Tampere 28.-29.11.2017 (Sivut 141-155). [15] Tampere University of Technology.

Zhang, B., Veijalainen, J., & Kotkov, D. (2017). Samsung and Volkswagen crisis communication in Facebook and Twitter: A comparative study. teoksessa WEBIST 2017 - Proceedings of the 13th International Conference on Web Information Systems and Technologies (Sivut 312-323). SCITEPRESS. https://doi.org/10.5220/0006301403120323

Juuti, P., & Rajala, R. (2017). Sata vuotta Suomen suurimmasta lavantautiepidemiasta. Vesitalous, 2017(1), 12-14.

Marttila, T., Annila, P., Suonketo, J., Kero, P., & Pentti, M. (2017). Securing the flow of information in renovation projects: Sustainable synergies from buildings to the urban scale. PROCEDIA ENVIRONMENTAL SCIENCES, 38, 228-233. https://doi.org/10.1016/j.proenv.2017.03.109

Katko, T. S. (2017). Suomen vesihuollon kehitys ja opit kansainvälisessä kontekstissa. Vesitalous, 58(1), 8-11.

Miettinen, P., Ahokas, M., Engström, T., Heinonen, J., & Auvinen, S. (2017). The role of base substrate on barrier and convertability properties of Water based barrier coated (WBBC) paper and paperboard. teoksessa Paper Conference and Trade Show, PaperCon 2017: Renew, Rethink, Redefine the Future, Minneapolis, Minnesota, USA, 23-26 April 2017 (Vuosikerta 1, Sivut 220-232). TAPPI Press.

Jääskeläinen, A., Thitz, O., & Heikkilä, J. (2017). The role of performance measurement in supplier-buyer value-creation. teoksessa Proceedings of 9th Conference on Performance Measurement and Management Control: 13-15 September 2017, Nice, France (Conference on Performance Measurement and Management Control). EIASM.

Taivalsaari, A., & Mikkonen, T. (2017). The Web as a software platform: Ten years later. teoksessa WEBIST 2017 - Proceedings of the 13th International Conference on Web Information Systems and Technologies (Sivut 41-50). SCITEPRESS. https://doi.org/10.5220/0006234800410050

Laudyn, U. A., Kwaśny, M., Karpierz, M. A., & Assanto, G. (2017). Three-color vector nematicon. Photonics Letters of Poland, 9(2), 36-38. https://doi.org/10.4302/plp.v9i2.718

Vanhalakka, J., Ilvonen, I., & Väätäjä, H. (2017). Utilizing knowledge networks in virtual or augmented reality solution creation. teoksessa F. Marimon, M. Mas-Machuca, J. Berbegal-Mirabent, & R. Bastida (Toimittajat), Proceedings of the 18th European Conference on knowledge Management ECKM 2017: 7-8 September 2017, Barcelona, Spain (Sivut 1008-1014). Academic Conferences and Publishing International.

Juuti, P., & Rajala, R. (2017). Valkea kaupunki, mustat vedet. Vesitalous, 2017(1), 15-17.

Ahmad, I., Rantanen, P., Sillberg, P., Laaksonen, J., Liu, S., Forss, T., ... Soini, J. (2017). VisualLabel: An Integrated Multimedia Content Management and Access Framework. teoksessa The Proceedings of the 27th International Conference on Information Modelling and Knowledge Bases, EJC 2017: June 5-9, 2017, Krabi, Thailand (Sivut 332-353)

Sillberg, P., Veesommai, C., Soini, J., & Jaakkola, H. (2017). Web-user-interface system utilizing rhmei and open data for a water quality analyzer. teoksessa V. Sornlertlamvanich, P. Chawakitchareon, A. Hansuebsai, C. Koopipat, Y. Kiyoki, H. Kangassalo, B. Thalheim, ... N. Yoshida (Toimittajat), The Proceedings of the 27th International Conference on Information Modelling and Knowledge Bases, EJC 2017: June 5-9, 2017, Krabi, Thailand (Sivut 444-451). Sirindhorn International Institute of Technology, Thammasat University, Thailand.

Ketonen-Oksi, S. (2016). Re-inventing organizational creativity and innovation through adopting a service-based working culture. teoksessa Integrating Art and Creativity into Business Practice (Sivut 1-20). IGI Global. https://doi.org/10.4018/978-1-5225-2050-4.ch001

Nisula, K., & Pekkola, S. (2016). Assessing business learning by analysing ERP simulation log files. teoksessa AIS SIGED 2016 Conference on IS education and Research. : Dublin, Ireland, December 10-11, 2016 Dublin.

Devos, M., Ometov, A., Mäkitalo, N., Aaltonen, T., Andreev, S., & Koucheryavy, Y. (2016). D2D communications for mobile devices: Technology overview and prototype implementation. teoksessa 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT) (Sivut 124-129). IEEE. https://doi.org/10.1109/ICUMT.2016.7765344

Galinina, O., Turlikov, A., Andreev, S., & Koucheryavy, Y. (2016). Improving reliability of replicated message delivery in cellular machine-type communications. teoksessa 2016 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT) (Sivut 106-110). IEEE. https://doi.org/10.1109/ICUMT.2016.7765341

Ranta, V., Aarikka-Stenroos, L., & Mäkinen, S. (2016). Business models in the circular economy: a structured multiple-case analysis. teoksessa Proceedings of ISPIM Innovation Summit, Kuala Lumpur, Malaysia. The International Society for Professional Innovation Management (ISPIM): 4-7 December 2016

Aarikka-Stenroos, L., Boedeker, S., Köppä, L., & Langwaldt, J. (2016). How to develop a new innovation education tool: case of impact canvas. teoksessa In the Proceedings of ISPIM Innovation Summit. The International Society for Professional Innovation Management (ISPIM). : 4-7 December 2016, Kuala Lumpur, Malaysia.

Lampio, K., & Karvinen, R. (2016). Multi-Objective Optimization of Fin Array Heat Sinks. teoksessa Therminic 2016: 22nd international workshop Thermal investigations of ICs and Systems IEEE. https://doi.org/10.1109/THERMINIC.2016.7749070

Kekonen, A., Bergelin, M., Eriksson, J-E., Ylänen, H., Kielosto, S., & Viik, J. (2016). Bioimpedance measurement system for evaluation of the status of wound healing. teoksessa 2016 15th Biennial Baltic Electronics Conference (BEC) (Sivut 175-178). IEEE. https://doi.org/10.1109/BEC.2016.7743757

Collin, J., Perttula, A., Parviainen, J., Racko, J., & Brida, P. (2016). Pedestrian Dead Reckoning with Particle Filter for Handheld Smartphone. teoksessa 2016 International Conference on Indoor Positioning and Indoor Navigation (IPIN) IEEE. https://doi.org/10.1109/IPIN.2016.7743608

Systä, K., Vuori, M., Järvinen, H-M., Ahtee, T., & Sten, H. (2016). Project types and industrial collaboration in project-based learning. teoksessa H-M. Järvinen, & R. Clark (Toimittajat), Proceedings of SEFI 2016 annual conference Tampere / Brussels: European Society for Engineering Education SEFI.

Lohan, E-S., Kauppinen, T., & Debnath, S. B. C. (2016). A Survey of People Movement Analytics Studies in the Context of Smart Cities. teoksessa Proceedings of the FRUCT’19 (Sivut 151-158) https://doi.org/10.23919/FRUCT.2016.7892195

Holopainen, S., & Kouhia, R. (2016). Continuum approach for modeling fatigue in amorphous glassy polymers. Applications to the investigation of damage mechanisms in polycarbonate.

Petrov, V., Pyattaev, A., Moltchanov, D., & Koucheryavy, Y. (2016). Terahertz band communications: Applications, research challenges, and standardization activities. teoksessa 2016 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT) (Sivut 1-8). IEEE. https://doi.org/10.1109/ICUMT.2016.7765354

Tamminen, P., & Viheriäkoski, T. (2016). Charged cable-system ESD event. teoksessa 2016 38th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD) IEEE. https://doi.org/10.1109/EOSESD.2016.7592559

Viheriäkoski, T., Kärjä, E., Hillberg, J., & Tamminen, P. (2016). Charge relaxation of slowly dissipative polymers. teoksessa 2016 38th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD) (Sivut 1-9). IEEE. https://doi.org/10.1109/EOSESD.2016.7592533

Aldawood, S., Fowley, F., Pahl, C., Taibi, D., & Liu, X. (2016). A coordination-based brokerage architecture for multi-cloud resource markets. teoksessa Proceedings - 2016 4th International Conference on Future Internet of Things and Cloud Workshops, W-FiCloud 2016 (Sivut 7-14). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/W-FiCloud.2016.19

Gudkova, I., Markova, E., Masek, P., Andreev, S., Hosek, J., Yarkina, N., ... Koucheryavy, Y. (2016). Modeling the utilization of a multi-tenant band in 3GPP LTE system with Licensed Shared Access. teoksessa 2016 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT) (Sivut 119-123). IEEE. https://doi.org/10.1109/ICUMT.2016.7765343

Amiot, C. G., Ryczkowski, P., Aalto, A., Toivonen, J., & Genty, G. (2016). Mid-Infrared Sources for Ultra-Broadband Cavity Enhanced Spectroscopy. teoksessa Frontiers in Optics 2016 [FTh5A.3] OSA.

Moilanen, C., Björkqvist, T., Ovaska, M., Koivisto, J., Miksic, A., Engberg, B., ... Alava, M. (2016). Modelling and Simulation of Radial Spruce Compression to Optimize Energy Efficiency in Mechanical Pulping. teoksessa 2016 International Mechanical Pulping (IMPC) Conference Proceedings, Monday, September 26 - Wednesday, September 28, Jacksonville, Florida, USA (Sivut 53-70). [1.3] USA: TAPPI.

Jussila, J., Helander, N., Vuori, V., & Okkonen, J. (2016). Sosiaalinen media brändi- ja asiakastiedon lähteenä. teoksessa P. Tuomi (Toimittaja), TiedeAreena 2016 (Vuosikerta 11, Sivut 55-56). Pori: Tampereen teknillinen yliopisto, Porin laitos.

Myllykoski, T., Pohjolainen, S., & Ali-Löytty, S. (2016). Students’ Use of Learning Tools and Tool Types: Solving Self-Study Assignments on an Online Platform. teoksessa SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation European Society for Engineering Education SEFI.

Joutsenlahti, J., Ali-Löytty, S., & Pohjolainen, S. (2016). Developing Learning and Teaching in Engineering Mathematics with and without Technology. teoksessa SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation European Society for Engineering Education SEFI.

Laine, K., Sipilä, E., Anderson, M., & Sydänheimo, L. (2016). Electronic Exam in Electronics Studies. teoksessa SEFI Annual Conference 2016: Engineering Education on Top of the Wolrd: Industry University Cooperation

Rekola, J., & Suntio, T. (2016). Implementing of Activating Learning Strategy for a Course on Electric Drives. teoksessa SEFI 2016 Annual Conference Proceedings: Implementing of Activating Learning Strategy for a Course on Electric Drives (Sivut 1-8). European Society for Engineering Education SEFI.

Helander, N., Boedeker, M., Hellsten, P., Jussila, J., Myllärniemi, J., & Tukiainen, M. (2016). Affective experiences and student engagement in higher education. teoksessa 44th Annual Conference Of The European Society For Engineering Education: 12-15 September 2016, Tampere, Finland Tampere.

Tukiainen, M. O. (2016). Students as mystery shoppers: lowering knowledge sharing barriers in higher education. teoksessa 44th Annual Conference Of The European Society For Engineering Education: 12-15 September 2016, Tampere, Finland Tampere.

Järvinen, H-M., & Mikkonen, T. (2016). Industrial impact on topics and types of Master's theses: Empirical study of software engineering theses made in 1990-2016. teoksessa H-M. Järvinen, & R. Clark (Toimittajat), Proceedings of SEFI 2016 Annual Conference European Society for Engineering Education SEFI.

Ketola, S., Sipilä, E., Pajarre, E., & Takala, J. (2016). New introducotry courses and teacher tutoring: Keys to an efficient beginning for university studies in engineering. teoksessa SEFI Annual Conference 2016: Engineering Education on Top of the Wolrd: Industry University Cooperation

Kuula, P. H., Leppänen, M. M., & Penttilä, M. E. (2016). Towards better learning by increased student engagement. teoksessa T. Niemi, & H-M. Järvinen (Toimittajat), Proceedings of the 44th SEFI Annual Conference 2016: 12th-15th September 2016, Tampere, Finland Tampere: European Society for Engineering Education SEFI.

Komar, M., Edelev, S., & Koucheryavy, Y. (2016). Handheld wireless authentication key and secure documents storage for the Internet of Everything. teoksessa Proceedings of the 18th Conference of Open Innovations Association FRUCT and Seminar on Information Security and Protection of Information Technolog, FRUCT-ISPIT 2016 (Sivut 120-130). IEEE COMPUTER SOCIETY PRESS. https://doi.org/10.1109/FRUCT-ISPIT.2016.7561517

Orsino, A., & Ometov, A. (2016). Validating information security framework for offloading from LTE onto D2D links. teoksessa Proceedings of the 18th Conference of Open Innovations Association FRUCT and Seminar on Information Security and Protection of Information Technolog, FRUCT-ISPIT 2016 (Sivut 241-247). IEEE COMPUTER SOCIETY PRESS. https://doi.org/10.1109/FRUCT-ISPIT.2016.7561534

Vuori, V., & Helander, N. (2016). Knowledge barriers in university-industry knowledge networks. teoksessa 17th European Conference on Knowledge Management, At Belfast, Northern Ireland, UK.: 1-2 Sep. 2016 (Sivut 952-959). Academic Conferences and Publishing International Limited Reading.

Valenti, M., Diment, A., Parascandolo, G., Squartini, S., & Virtanen, T. (2016). DCASE 2016 Acoustic Scene Classification Using Convolutional Neural Networks. teoksessa Proceedings of the Detection and Classification of Acoustic Scenes and Events 2016 Workshop (DCASE2016) Tampere University of Technology. Department of Signal Processing.

Pertilä, P., & Brutti, A. (2016). Increasing the environment-awareness of rake beamforming for directive acoustic sources. teoksessa 15th International Workshop on Acoustic Signal Enhancement (IWAENC)

Machado, M. A., Magnier-Watanabe, R., & Peltola, T. (2016). Capturing knowledge from research projects: From project reports to storytelling. teoksessa 2016 Portland International Conference on Management of Engineering and Technology (PICMET) (Sivut 2048-2057). IEEE. https://doi.org/10.1109/PICMET.2016.7806602

Takala, A., & Korhonen-Yrjänheikki, K. (2016). Finnish Engineering Education for Sustainable Development in 2016 - Call for collaborative learning. teoksessa SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation European Society for Engineering Education SEFI.

Väätäjä, H., & Ahtinen, A. (2016). Integrating mobile orienteering to team forming activity in a software engineering course. teoksessa SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation European Society for Engineering Education SEFI.

Valmari, A., & Kaarakka, T. (2016). MathCheck: a tool for checking math solutions in detail. teoksessa SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation European Society for Engineering Education SEFI.

Kangas, J., & Lunden, O-P. (2016). Strengthening student engagement by integrating the contents of a flipped course around a well-confined real life theme. teoksessa SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the Wolrd: Industry University Cooperation

Santinha, J., Gupta, A., Martins, L., Annila, T., Häkkinen, A., Mora, A., ... Fonseca, J. R. (2016). icellfusion: Tool for fusion and analysis of live-cell images from time-lapse multimodal microscopy. teoksessa Biometrics: Concepts, Methodologies, Tools, and Applications (Sivut 806-834). IGI Global. https://doi.org/10.4018/978-1-5225-0983-7.ch033

Vainio, T., & Walsh, T. (2016). Learning Maths with mobiles: Cross-cultural design of technology with experiences in South-Africa and Finland. teoksessa Blended Learning: Concepts, Methodologies, Tools, and Applications (Vuosikerta 4, Sivut 741-759). IGI Global. https://doi.org/10.4018/978-1-5225-0783-3.ch037

Dumitrescu, M., Uusitalo, T., Virtanen, H., Laakso, A., Bardella, P., & Montrosset, I. (2016). Simulation of photon-photon resonance enhanced direct modulation bandwidth of DFB lasers. teoksessa 16th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2016 (Sivut 147-148). IEEE. https://doi.org/10.1109/NUSOD.2016.7547075

Virtanen, H., Uusitalo, T., & Dumitrescu, M. (2016). Simulation studies of DFB laser longitudinal structures for narrow linewidth emission. teoksessa 16th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2016 (Sivut 153-154). IEEE. https://doi.org/10.1109/NUSOD.2016.7547078

Uusitalo, T., Virtanen, H., & Dumitrescu, M. (2016). Transverse structure optimization of laterally-coupled ridge waveguide DFB lasers. teoksessa 16th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2016 (Sivut 79-80). [7547038] IEEE. https://doi.org/10.1109/NUSOD.2016.7547038

Silverajan, B., Vajaranta, M., & Kolehmainen, A. (2016). Home Network Security: Modelling Power Consumption to Detect and Prevent Attacks on Homenet Routers. teoksessa Proceedings of the 11th Asia Joint Conference on Information Security (AsiaJCIS 2016), Fukuoka, Japan, August 4-5, 2016 (Sivut 9-16). IEEE. https://doi.org/10.1109/AsiaJCIS.2016.10

Vajaranta, M., Kannisto, J., & Harju, J. (2016). Implementation Experiences and Design Challenges for Resilient SDN Based Secure WAN Overlays. teoksessa 2016 11th Asia Joint Conference on Information Security (AsiaJCIS) (Sivut 17-23). IEEE. https://doi.org/10.1109/AsiaJCIS.2016.25

Nurmi, J., Kannisto, J., & Vajaranta, M. (2016). Observing Hidden Service Directory Spying with a Private Hidden Service Honeynet. teoksessa Proceedings of the 11th Asia Joint Conference on Information Security (AsiaJCIS 2016), Fukuoka, Japan, August 4-5, 2016 (Sivut 55-59) https://doi.org/10.1109/AsiaJCIS.2016.31

Nenonen, S., Rahtola, R., & Kojo, I. (2016). Third places and user preferences – affordances in the cities. teoksessa P. A. Jensen (Toimittaja), Proceedings of CFM's Second Nordic Conference: Facilities Management Research and Practice;: 29-30 AUGUST 2016, Denmark (Sivut 17-25)

Saari, U., & Mäkinen, S. (2016). Study on the capability to measure stakeholders’ brand experiences with a consumer-centric measurement framework. teoksessa Global Marketing Conference Proceedings 2016 Hong Kong, July 21 - 24: Track: Stakeholders-brand Relationships (Sivut 1034-1035). (Proceedings of the Global Marketing Conference).

Helander, N., & Myllylä, M. (2016). Teoriaa ja kokemuksia arvioinnista MOOCien aikakaudella. TAMPEREEN AMMATTIKORKEAKOULUN JULKAISUJA. SARJA B, RAPORTTEJA, 70-77.

Suominen, A., & Mäenpää, S. (2016). Power bases in lead organization network governance form: a multi-level approach. Julkaisun esittämispaikka: European Group for Organizational Studies Colloquium, .

Ala-Maakala, M., & Liimatainen, H. (2016). Customer value management framework for supply chains. teoksessa K. Pawar (Toimittaja), The proceedings of 21st international symposium on logistics (ISL 2016): Sustainable transport and supply chain innovation, Kaohsiung, Taiwan 3-6 July 2016 (Sivut 447-456)

Sorokin, M., Strokina, N., Eerola, T., Lensu, L., Karttunen, K., & Kalviainen, H. (2016). Image-based characterization of the pulp flows. Pattern Recognition and Image Analysis, 26(3), 630-637. https://doi.org/10.1134/S1054661816030196

Goncalves, N. S. M., Martins, L., Tran, H., Oliveira, S. M. D., Neeli-Venkata, R., Fonseca, J., & Ribeiro, A. S. (2016). In vivo single-molecule dynamics of transcription of the viral T7 Phi 10 promoter in Escherichia coli. teoksessa The 8th International Conference on Bioinformatics, Biocomputational Systems and Biotechnologies (BIOTECHNO2016) (Sivut 9-15). IARIA.

Ribeiro, A., & Oliveira, S. (2016). Using a synthetic probe to study the robustness of the segregation process of protein aggregates in Escherichia coli. teoksessa The 8th International Conference on Bioinformatics, Biocomputational Systems and Biotechnologies (BIOTECHNO2016) (Sivut 21-22). IARIA.

Suominen, O., Mörsky, V., Ritala, R., & Vilkko, M. (2016). Framework for optimization and scheduling of a copper production plant. teoksessa 26th European Symposium on Computer Aided Process Engineering, 2016 (Vuosikerta 38, Sivut 1243-1248). (Computer Aided Chemical Engineering). Elsevier Science B.V.. https://doi.org/10.1016/B978-0-444-63428-3.50212-5

Huuhka, S. (2016). Demolished buildings: Empirical evidence on types, ages and construction materials. teoksessa P. Hajek, J. Tywoniak, A. Lupisek, & K. Sojkova (Toimittajat), CESB16 - Central Europe towards Sustainable Building 2016: Innovations for Sustainable Future, June 22-24, 2016, Prague (Sivut 1105-1112). Prague: Czech Technical University in Prague.

Huuhka, S. (2016). Demolition Rates of Buildings with Different Functions and Construction Materials. teoksessa J. Zelezna, P. Hajek, J. Tywoniak, A. Lupisek, & K. Sojkova (Toimittajat), YRSB16 - iiSBE Forum of Young Researchers in Sustainable Building 2016: Innovations for Sustainable Future June 21, 2016, Prague (Sivut 301-307). Prague: Czech Technical University in Prague.

Mäenpää, S., Suominen, A., & Breite, R. (2016). Knowledge integration method development for multi-stakeholder innovation. teoksessa Proceedings of The XXVII ISPIM Conference 2016 Porto, Portugal - 19-22 June 2016 : Blending Tomorrow’s Innovation Vintage

Saari, U. A., & Mäkinen, S. J. (2016). Exploring how brand experience measurement could be used for integrating marketing and R&D. teoksessa XXVII ISPIM Innovation Conference 2016: Porto, 19-22 June, 2016

Aarikka-Stenroos, L., Peltola, T., Rikkiev, A., & Saari, U. (2016). Multiple facets of innovation and business ecosystem research: the foci, methods and future agenda. teoksessa XXVII ISPIM Innovation Conference 2016: Porto, 19-22 June, 2016 (Sivut 1-33)

Michele Felicetti, A., Ammirato, S., Raso, C., Aramo-Immonen, H., & Jussila, J. (2016). Being a start-upper in Italy: Motivations, obstacles and success factors. teoksessa Proceedings of the 11th forum on knowledge asset dynamics: Towards a new architecture of knowledge: big data, culture and creativity (Sivut 1370-1383). [182] Dresden.

Stormi, K., Laine, T., & Suomala, P. (2016). Customer lifetime value in manufacturing services. teoksessa Proceedings of the Manufacturing Accounting Research Conference 2016: Lisbon, Portugal, June 15-17, 2016 Belgium: European Institute for Advanced Studies in Management EIASM.

Jussila, J., Aramo-Immonen, H., Rouvari, O., Porkka, P., & Ammirato, S. (2016). Does Strategic and Innovative Fit Indicate Smart Social Media use in a Company? teoksessa Proceedings of the 11th International Forum on Knowledge Asset Dynamics: Towards a New Architecture of Knowledge: Big Data, Culture and Creativity, Dresden -Germany 15-17 June 2016 (Sivut 1973-1983). [249] Dresden.

Tenucci, A., & Laine, T. (2016). Management accounting and new service development under servitization: literature review and case studies. teoksessa Proceedings of the Manufacturing Accounting Research Conference 2016: Lisbon, Portugal, June 15-17, 2016

Saukkonen, N., Laine, T., & Suomala, P. (2016). Management accounting in managerial work: engaging facts and feelings in decision making. teoksessa Proceedings of the Manufacturing Accounting Research Conference 2016: Lisbon, Portugal, June 15-17, 2016 (Proceedings of the Manufacturing Accounting Research Conference ). European Institute for Advanced Studies in Management EIASM.

Haapanen, J., Krohns-Välimäki, H., & Verho, P. (2016). Improving the Situation Awareness of DSOs in Major Disturbances by Visualizing the State of Mobile Networks. teoksessa CIRED Workshop 2016

Ketonen-Oksi, S. (2016). Adapting service-based working culture as the key driver for organisational creativity and innovation. teoksessa Towards a new architecture of knowledge : Big Data, culture and creativity: IFKAD 2016-11th International Forum on Knowledge Asset Dynamics, Dresden 15-17.6.2016, Germany

Helander, N., Okkonen, J., Vuori, V., Paavilainen, N., & Kujala, J. (2016). Enablers and Restraints of Knowledge Work – Does profession make a difference? teoksessa Towards a new architecture of knowledge : Big Data, culture and creativity: IFKAD 2016-11th International Forum on Knowledge Asset Dynamics, Dresden 15-17.6.2016, Germany (Sivut 40-52)

Burd, S. C., Leinonen, T., Penttinen, J. P., Allcock, D. T. C., Slichter, D. H., Srinivas, R., ... Wineland, D. J. (2016). Single-frequency 571nm VECSEL for photo-ionization of magnesium. teoksessa Proceedings of SPIE: Vertical External Cavity Surface Emitting Lasers (VECSELs) VI (Vuosikerta 9734). [973411] (SPIE Conference Proceedings). San Francisco: SPIE. https://doi.org/10.1117/12.2213398

Róg, T., Orłowski, A., Llorente, A., Skotland, T., Sylvänne, T., Kauhanen, D., ... Vattulainen, I. (2016). Data including GROMACS input files for atomistic molecular dynamics simulations of mixed, asymmetric bilayers including molecular topologies, equilibrated structures, and force field for lipids compatible with OPLS-AA parameters. Data in Brief, 7, 1171-1174. https://doi.org/10.1016/j.dib.2016.03.067

Vuorinen, L., & Martinsuo, M. (2016). Practice of project control under different levels of complexity in engineering projects. teoksessa EURAM (European Academy of Management) conference 2016: Manageable cooperation? June 1-4, 2016 Paris

Huttunen, H., Shokrollahi Yancheshmeh, F., & Chen, K. (2016). Car Type Recognition with Deep Neural Networks. teoksessa 2016 IEEE Intelligent Vehicles Symposium, IV 2016 (Sivut 1115-1120). IEEE. https://doi.org/10.1109/IVS.2016.7535529

Ritala, P., & Aarikka-Stenroos, L. (2016). Disruptive innovation in ecosystems: Path-creation and institutional barriers. teoksessa XXVI ISPIM Conference: Porto, Portugal (2016) Blending Tomorrow’s Innovation Vintage.: The International Society for Professional Innovation Management, Jun. 2016 (Sivut 1-16). Manchester: International Society for Professional Innovation Management ISPIM.

Lummi, K., Rautiainen, A., Järventausta, P., Heine, P., Lehtinen, J., & Hyvärinen, M. (2016). Electricity Distribution Network Tariffs - Present Practices, Future Challenges and Development Possibilities. teoksessa CIRED Workshop 2016

Kulmala, A., & Repo, S. (2016). Handling exceptional situations in a distribution network congestion management algorithm. teoksessa CIRED Workshop 2016 Helsinki, Finland. https://doi.org/10.1049/cp.2016.0663

Wang, Y., Lan, R., Mateos, X., Li, J., Pan, Y., Suomalainen, S., ... Petrov, V. (2016). In-band-pumped mode-locked Ho:YAG ceramic laser at 2.1 μm. teoksessa 2016 Conference on Lasers and Electro-Optics (CLEO) (Sivut 1-2). IEEE.

Nenonen, S., Vaittinen, E., & Martinsuo, M. (2016). Incremental service innovations in a manufacturing firm’s delivery chain. teoksessa 23rd Innovation and Product Development Management Conference (IPDMC): Glasgow, U. K. June 12-14, 2016 (Innovation and Product Development Management Conference).

Martinsuo, M., & Väliaho, V. (2016). Service orientation and innovation in the strategies of manufacturing SMEs. teoksessa 23rd Innovation and Product Development Management Conference (IPDMC): 12-14 June, 2016, Glasgow, U.K. EIASM.

Vats, S., & Rissanen, M. (2016). Parameters Affecting the Upcycling of Waste Cotton and PES/CO Textiles. Recycling, 1(1), 166-177. https://doi.org/10.3390/recycling1010166

Oostra, M., & Huovinen, P. (2016). Radical programmes for developing the EU residential building sectors as exemplified by Finland and the Netherlands. teoksessa Proceedings of CIB World Building Congress 2016, May 30 - June 3, 2016 Tampere, Finland: Creating built environments of new opportunities (Vuosikerta I, Sivut 17-28). Tampere: Tampere University of Technology. Department of Civil Engineering.

Huovinen, P. (2016). Relevance of five generic business ideation approaches vis-a-vis contexts embedded within construction markets. teoksessa N. Achour (Toimittaja), Proceedings of the CIB World Building Congress 2016, May 30 - June 3, 2016, Tampere, Finland: Advancing products and services (Vuosikerta V, Sivut 1129-1140). Tampere: Tampere University of Technology. Department of Civil Engineering.

Vihola, J., & Edelman, H. (2016). Life-Cycle Economics of Rentable Prefabricated School Facility Units in Municipal Real Estate Procurement. teoksessa Proceedings of the CIB World Building Congress 2016: Volume V: Advancing Products and Services (Sivut 76-87). Tampere University of Technology. Department of Civil Engineering.

Kähkönen, K., & Keinänen, M. (Toimittajat) (2016). Proceedings of the CIB World Building Congress 2016: Volume I - Creating built environments of new opportunities. (Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics. Report; Vuosikerta 18). Tampere University of Technology. Department of Civil Engineering.

Saari, A., & Huovinen, P. (Toimittajat) (2016). Proceedings of the CIB World Building Congress 2016: Volume III - Building Up Business Operations and Their Logic. Shaping Materials and Technologies. (Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics. Report; Vuosikerta 18). Tampere University of Technology. Department of Civil Engineering.

Nenonen, S., & Junnonen, J-M. (Toimittajat) (2016). Proceedings of the CIB World Building Congress 2016: Volume IV - Understanding Impacts and Functioning of Different Solutions. (Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics. Report; Vuosikerta 18). Tampere University of Technology. Department of Civil Engineering.

Jussila, J., Boedeker, M., Jalonen, H., & Helander, N. (2016). Social media analytics empowering marketing insight- A framework for analyzing affective experiences from social media content. Julkaisun esittämispaikka: EMAC 2016, Oslo, Norja.

Paloniitty, M. (2016). Durability study on high speed water hydraulic miniature on/off-valve. teoksessa DFP16, Proceedings of the eighth workshop on digital fluid power, May 24-25, 2016, Tampere, Finland (Sivut 201-211). Tampere.

Fouladi, A., Järvenhaara, J., Filanovsky, I. M., & Tchamov, N. T. (2016). A Variable Battery Supply DC-DC Buck Converter Designed for 45nm-CMOS Technology. teoksessa 2016 IEEE Canadian Conference on Electrical and Computer Engineering (CCECE), Vancouver, May 15-18, 2016. https://doi.org/10.1109/CCECE.2016.7726839

Filanovsky, I. M., Järvenhaara, J. K., & Tchamov, N. T. (2016). On Moderate Inversion/Saturation Regions As Approximations to "Reconciliation" Model. teoksessa 2016 IEEE Canadian Conference on Electrical and Computer Engineering (CCECE), Vancouver, May 15-18, 2016 IEEE. https://doi.org/10.1109/CCECE.2016.7726696

Raunio, J-P., & Ritala, R. (2016). Optimal operation of a QCS scanner in a paper machine based on the information of QCS and WIS measurements. teoksessa PaperCon 2016 Conference Proceedings -TAPPI (Sivut 1-11). Cincinnati, USA: TAPPI.

Passinmäki, P. (2016). Architecture beyond signs and symbols : Zumthor's response to the problems of aesthetics. ARQ-Architectural Research Quarterly, 19(4), 325-328. https://doi.org/10.1017/S1359135516000038

Habib, M., Hussain, A., Rasheed, S., & Ali, M. (2016). Adaptive fuzzy inference system based directional median filter for impulse noise removal. AEU International Journal of Electronics and Communication, 70(5), 689-697. https://doi.org/10.1016/j.aeue.2016.02.005

Vaittinen, E., Martinsuo, M., & Nenonen, S. (2016). Enhancing the acceptance of advanced services among users of complex systems. teoksessa T. Baines, D. Harrison, & J. Zolkiewski (Toimittajat), Servitization: Shift, Transform, Grow: Proceedings of the Spring Servitization Conference, 16-17 May 2016 (SSC2016) (Sivut 162-170)

Di Buo, B., D'Ignazio, M., Selänpää, J., & Länsivaara, T. (2016). Preliminary results from a study aiming to improve ground investigation data. teoksessa Proceedings of the 17th Nordic Geotechnical Meeting: Challenges in Nordic Geotechnic 25th-28th of May (Sivut 187-197). Reykjavik: Icelandic Geotechnical Society.

D'Ignazio, M., & Länsivaara, T. (2016). Strength increase below an old test embankment in Finland. teoksessa The 17th Nordic Geotechnical Meeting: Conference proceedings (Sivut 357-366). Reykjavik: Icelandic Geotechnical Society.

Pakkala, T., Lemberg, A-M., & Lahdensivu, J. (2016). The effect of climate change on the amount of wind driven rain on concrete facades. teoksessa M. Prins, H. Wamelink, B. Giddings, K. Ku, & M. Feenstra (Toimittajat), Proceedings of the CIB World Building Congress 2016: Vol 2 : Environmental opportunities and challenges, Constructing commitment and acknowledging human experiences (Vuosikerta 2, Sivut 153-165). Tampere: Tampere University of Technology. Department of Civil Engineering.

Ometov, A., Masek, P., Malina, L., Florea, R., Hosek, J., Andreev, S., ... Koucheryavy, Y. (2016). Feasibility characterization of cryptographic primitives for constrained (wearable) IoT devices. teoksessa 2016 IEEE International Conference on Pervasive Computing and Communication Workshops, PerCom Workshops 2016 IEEE. https://doi.org/10.1109/PERCOMW.2016.7457161

Vilmi, P., Nelo, M., Voutilainen, J-V., Palosaari, J., Pörhönen, J., Tuukkanen, S., ... Fabritius, T. (2016). Fully printed memristors for a self-sustainable recorder of mechanical energy. Flexible and Printed Electronics, 1(2), [025002]. https://doi.org/10.1088/2058-8585/1/2/025002

Bernhardt, J., Helander, N., Jussila, J., & Kärkkäinen, H. (2016). Crowdsourcing in Business-to-Business Markets: A Value Creation and Business Model Perspective. teoksessa Encyclopedia of E-Commerce Development, Implementation, and Management (Sivut 933-943). [66] United States: IGI Global. https://doi.org/10.4018/978-1-4666-9787-4.ch066

Karimi, N., Alberucci, A., Virkki, M., Priimägi, A., Kauranen, M., & Assanto, G. (2016). Quenching nematicon fluctuations via photo-stabilization. Photonics Letters of Poland, 8(1), 2-4. https://doi.org/10.4302/plp.2016.1.02

Tiihonen, J., Schramm, A., Kylänpää, I., & Rantala, T. (2016). Finite temperature path-integral modeling of quantum dot cellular automata. Julkaisun esittämispaikka: PHYSICS DAYS / FYSIIKAN PÄIVÄT : ANNUAL MEETING OF THE FINNISH PHYSICAL SOCIETY, .

Mari, T., Leivo, V., Pekkonen, M., Aaltonen, A., Kiviste, M., & Haverinen-Shaughnessy, U. (2016). Sisäympäristön laadun ja terveellisyyden arviointi energiaparannuskohteissa. teoksessa Sisäilmastoseminaari 2016, Sisäilmayhdistys raportti 34 (Sivut 13-18). SIY SISÄILMATIETO OY.

Parrotta, D., Casula, R., Penttinen, J-P., Leinonen, T., Kemp, A., Guina, M., & Hastie, J. (2016). InGaAs-QW VECSEL emitting >1.300-nm via intracavity Raman conversion. teoksessa Vertical External Cavity Surface Emitting Lasers (VECSELs) VI (Proceedings of SPIE). https://doi.org/10.1117/12.2217593

Uusitalo, T., Virtanen, H., Viheriälä, J., Salmi, J., Aho, A. T., & Dumitrescu, M. (2016). Difference frequency modulation of multi-section dual-mode lasers with nanoscale surface gratings. teoksessa A. A. Belyanin, & P. M. Smowton (Toimittajat), SPIE Proceedings: Novel In-Plane Semiconductor Lasers XV (Vuosikerta 9767). [97670S ] (Proceedings of SPIE). SPIE. https://doi.org/10.1117/12.2213888

Habib, M., Rasheed, S., Hussain, A., & Ali, M. (2016). Random Value Impulse Noise Removal Based on Most Similar Neighbors. teoksessa 2015 13th International Conference on Frontiers of Information Technology (FIT) (Sivut 329-333). IEEE. https://doi.org/10.1109/FIT.2015.64

El-Khozondar, H., El-Khozondar, R., Matter, K., & Suntio, T. (2016). A review study of photovoltoltaic array maximum power point tracking algorithms. Renewables: Wind, Water, and Solar, 3(1). https://doi.org/10.1186/s40807-016-0022-8

Ropo, M., Schneider, M., Baldauf, C., & Blum, V. (2016). First-principles data set of 45,892 isolated and cation-coordinated conformers of 20 proteinogenic amino acids. Scientific Data, 3, [160009]. https://doi.org/10.1038/sdata.2016.9

Tokola, H., Niemi, E., & Väistö, V. (2016). Lean manufacturing methods in simulation literature: Review and association analysis. teoksessa 2015 Winter Simulation Conference (WSC) (Sivut 2239-2248) https://doi.org/10.1109/WSC.2015.7408336

Filippov, V., Chamorovskii, Y. K., Golant, K. M., Vorotynskii, A., & Okhotnikov, O. G. (2016). Optical amplifiers and lasers based on tapered fiber geometry for power and energy scaling with low signal distortion. teoksessa J. Ballato (Toimittaja), Proceedings of SPIE: Fiber Lasers XIII: Technology, Systems, and Applications (Vuosikerta 9728). [97280V-1] ( SPIE conference proceedings). SPIE. https://doi.org/10.1117/12.2218051

Saarinen, E. J., Lyytikäinen, J., Ranta, S., Rantamäki, A., Saarela, A., Sirbu, A., ... Okhotnikov, O. G. (2016). A 1.5-W frequency doubled semiconductor disk laser tunable over 40 nm at around 745 nm. teoksessa Proceedings of SPIE: Vertical External Cavity Surface Emitting Lasers (VECSELs) VI (Vuosikerta 9734). [97340P-8] (Spie conference proceedings). SPIE. https://doi.org/10.1117/12.2209384

Davidson, P., Raunio, J. P., & Piché, R. (2016). Accurate depth estimation from a sequence of monocular images supported by proprioceptive sensors. teoksessa 23rd Saint Petersburg International Conference on Integrated Navigation Systems, ICINS 2016 - Proceedings (Sivut 249-257). State Research Center of the Russian Federation.

Kauppila, P., Kouhia, R., Ojanperä, J., Saksala, T., & Sorjonen, T. (2016). A continuum damage model for creep fracture and fatigue analyses. teoksessa 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy (Sivut 887–894). (Procedia Structural Integrity; Vuosikerta 2). https://doi.org/10.1016/j.prostr.2016.06.114

Vainio, V. V., & Pulkkinen, A. (2016). A follow-up case study of the relation of PLM Architecture, Maturity and Business processes. teoksessa Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers (Sivut 867-873). (IFIP Advances in Information and Communication Technology; Vuosikerta 467). Springer New York LLC. https://doi.org/10.1007/978-3-319-33111-9_79

Stormi, K., Laine, T., & Korhonen, T. (2016). Agile methods in performance management system development process. teoksessa 10th Conference On New Directions In Management Accounting, Brussels, Belgium, December 14-16, 2016

Van Mellaert, R., Mela, K., Tiainen, T., Heinisuo, M., Lombaert, G., & Schevenels, M. (2016). A mixed-integer linear programming approach for global discrete size optimization of frame structures. teoksessa ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering: Crete; Greece; 5 June 2016 through 10 June 2016 (Vuosikerta 2, Sivut 3395-3408). National Technical University of Athens.

Alexandru, R. C., & Lohan, E-S. (2016). Analysis of Real Mobility Records in Urban and Suburban Environments. teoksessa 26TH DAAAM International Symposium on Intelligent Manufacturing and Automation (Sivut 0688-0692). DAAAM International. https://doi.org/10.2507/26th.daaam.proceedings.094

Alberucci, A., Pannian, J. C., Slussarenko, S., Piccirillo, B., Santamato, E., Marrucci, L., & Assanto, G. (2016). A new waveguiding mechanism based upon geometric phase. teoksessa Frontiers in Optics 2016 [FF3H.3] Optical Society of America (OSA).

Prudanov, A., Tkachev, S., Golos, N., Masek, P., Hosek, J., Fujdiak, R., ... Misurec, J. (2016). A trial of yoking-proof protocol in RFID-based smart-home environment. teoksessa Distributed Computer and Communication Networks - 19th International Conference, DCCN 2016, Revised Selected Papers (Vuosikerta 678, Sivut 25-34). (Communications in Computer and Information Science; Vuosikerta 678). Springer Verlag. https://doi.org/10.1007/978-3-319-51917-3_3

Kouhia, R., Holopainen, S., Ottosen, N. S., Matti, R., & Saksala, T. (2016). A unified lcf-hcf model based on continuum mechanics. Julkaisun esittämispaikka: Nordic Seminar on Computational Mechanics, .

Lehtonen, V., & Länsivaara, T. (2016). Back-calculation of the Saint-Alban A test embankment with a new modelling approach in LEM. teoksessa Proceedings of the The 17th Nordic Geotechnical Meeting, Reykjavik Iceland: 25th - 28th of May 2016 (Sivut 691-699)

Salo, K., Giova, D., & Mikkonen, T. (2016). Backend infrastructure supporting audio augmented reality and storytelling. teoksessa Human Interface and the Management of Information: Applications and Services: 18th International Conference, HCI International 2016 Toronto, Canada, July 17-22, 2016. Proceedings, Part II (Sivut 325-335). (Lecture Notes in Computer Science; Vuosikerta 9735). Springer Verlag. https://doi.org/10.1007/978-3-319-40397-7_31

Ojala, M., & Mahlamäki, T. (2016). Benefits of digitally guided buying in B2B markets. teoksessa 25th annual IPSERA Conference: Dortmund, Sunday 20 March - Wednesday 23 March 2016 Dortmund.

Sorri, J., Heljo, J., Järventausta, P., Honkapuro, S., & Harsia, P. (2016). Building Codes and Demand Response of Energy Use. teoksessa S. Nenonen, & J-M. Junnonen (Toimittajat), Proceedings of the CIB World Building Congress 2016: Volume IV: Understanding Impacts and Functioning of Different Solutions (Vuosikerta 4, Sivut 8-21). Tampere University of Technology. Department of Civil Engineering.

Haverinen-Shaughnessy, U., Pekkonen, M., Turunen, M., Aaltonen, A., & Leivo, V. (2016). Building energy retrofits, occupant health and wellbeing. teoksessa M. Prins, H. Wamelink, B. Giddings, K. Ku, & M. Feenstra (Toimittajat), CIB World Building Congress 2016 Proceedings : Volume 2 Environmental Opportunities and challenges - Constructing commitment and acknowledging human experiences (Vuosikerta 2, Sivut 679-687). Tampere University of Technology. Department of Civil Engineering.

Kurvinen, A., & Sorri, J. (2016). Bus Transportation Accessibility - Does It Impact Housing Values? teoksessa S. Nenonen, & J-M. Junnonen (Toimittajat), Proceedings of the CIB World Building Congress 2016: Understanding impacts and functioning of different solutions (Vuosikerta IV, Sivut 321-331). Tampere: Tampere University of Technology. Department of Civil Engineering.

Nenonen, S., Eriksson, R., Niemi, O., Junghans, A., Nielsen, S. B., & Lindahl, G. (2016). Campus retrofitting (CARE) methodology: a way to co-create future learning environments. teoksessa Proceedings of the 20th CIB World Building Congress 2016: May 30-June 3, 2016, Tampere, Finland (Sivut 738-749)

Pulkkinen, A., Huhtala, P., Leino, S-P., Anttila, J. P., & Vainio, V. V. (2016). Characterising the industrial context of engineering change management. teoksessa Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers (Sivut 618-627). (IFIP Advances in Information and Communication Technology; Vuosikerta 467). Springer New York LLC. https://doi.org/10.1007/978-3-319-33111-9_56

Koivisto, K., Forsman, J., Ronkainen, M., Lahtinen, P., Kolisoja, P., & Kuula, P. (2016). Commercialising reclaimed materials in earthworks – guidelines for productization and the process of appending these materials in the Finnish national code of practice. teoksessa Proceedings of the 17th Nordic Geotechnical Meeting Reykjavik Iceland: Challenges in Nordic Geotechnic 25th - 28th of May Reykjavik: Icelandic Geotechnical Society.

Pyrhönen, V-P., Seppälä, J., & Salmenperä, M. (2016). Computer-supported collaborative learning: Praxes in new cell-oriented configurable PC-classroom. teoksessa SEFI conference 2016: Engineering Education on Top of the World: Industry University Cooperation

Davidson, P., & Merkulova, I. (2016). Computer vision aided navigation systems. teoksessa 23rd Saint Petersburg International Conference on Integrated Navigation Systems, ICINS 2016 - Proceedings (Sivut 560-562). State Research Center of the Russian Federation.

Keinänen, M., Uotila, U., Sorri, J., Teriö, O., & Kähkönen, K. (2016). Consensus building in the pre-design phase of building projects. teoksessa M. Prins, H. Wamelink, B. Giddings, K. Ku, & M. Feenstra (Toimittajat), WBC16 Proceedings of the CIB World Building Congress 2016 Volume II : Environmental Opportunties and challenges, Constructing commitment and acknowledging human experiences (Vuosikerta Volume II , Sivut 561-572). (Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics.). Tampere University of Technology. Department of Civil Engineering.

Rautiainen, A., Lummi, K., Järventausta, P., Tikka, V., & Lana, A. (2016). Control of Electric Vehicle Charging in Domestic Real Estates as Part of Demand Response Functionality. teoksessa Cired Workshop 2016 [0240]

Mäki, A-J., Kontunen, A., Ryynänen, T., Verho, J., Kreutzer, J., Lekkala, J., & Kallio, P. (2016). Design and simulation of a thermal flow sensor for gravity-driven microfluidic applications. teoksessa IEEE 11th Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS) (Sivut 125-129). IEEE. https://doi.org/10.1109/NEMS.2016.7758214

Salmisto, A., Keinänen, M., & Kähkönen, K. (2016). Development of students’ multidisciplinary collaboration skills by simulation of the design process. teoksessa Proceedings of the CIB World Building Congress 2016: Volume I - Creating built environments of new opportunities. (Vuosikerta 1, Sivut 348-360)

Hokka, M., Mirow, N., Nagel, H., Vogt, S., & Kuokkala, V-T. (2016). DIC measurements of the human heart during cardiopulmonary bypass surgery. teoksessa Conference Proceedings of the Society for Experimental Mechanics Series (Vuosikerta 6, Sivut 51-59). Springer New York LLC. https://doi.org/10.1007/978-3-319-21455-9_6

Kärkkäinen, H., & Silventoinen, A. (2016). Different approaches of the PLM maturity concept and their use domains –analysis of the state of the art. teoksessa Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers (Sivut 89-102). (IFIP Advances in Information and Communication Technology; Vuosikerta 467). Springer New York LLC. https://doi.org/10.1007/978-3-319-33111-9_9

Pannian, J. C., Alberucci, A., Boardman, A., & Assanto, G. (2016). Diffraction compensation of finite beams in hyperbolic metamaterials. teoksessa Laser science 2016 [JW4A.10] Optical Society of America (OSA).

Narhi, M., Wetzel, B., Billet, C., Merolla, J-M., Toenger, S., Sylvestre, T., ... Dudley, J. M. (2016). Direct Measurement of Temporal Rogue Waves Generated by Spontaneous Modulation Instability. teoksessa Frontiers in Optics 2016 [FTu3I.4 ] Optical Society of America.

Isotalo, T. J., & Niemi, T. (2016). Dots-on-the-fly electron beam lithography. teoksessa C. Bencher (Toimittaja), SPIE Proceedings: Alternative Lithographic Technologies VIII (Vuosikerta 9777). [97771E] (Proceedings of SPIE). SPIE. https://doi.org/10.1117/12.2219136

Niemelä, P., Di Flora, C., Helevirta, M., & Isomöttönen, V. (2016). Educating future coders with a holistic ICT curriculum and new learning solutions. teoksessa 7th International Multi-Conference on Complexity, Informatics and Cybernetics, IMCIC 2016 and 7th International Conference on Society and Information Technologies, ICSIT 2016 (Vuosikerta 2, Sivut 132-136). IIIS.

Viita, J., & Junnonen, J-M. (2016). Empowerment in construction: a qualitative analysis of subcontractors' quality assurance. teoksessa Proceedings of the CIB World Building Congress 2016: Volume II - Environmental Opportunies and Challenges. Constructing Commitment and Acknowledging Human Experiences (Sivut 436-448). Tampere University of Technology. Department of Civil Engineering.

Pyrhönen, V-P. (2016). Enhancing old laboratory experiment using flipped learning: Towards self-regulating collaborative groups in blended learning environment. teoksessa SEFI conference 2016: Engineering Education on Top of the World: Industry University Cooperation

Holopainen, S. (2016). Evolution equations based approach for modeling of fatigue in amorphous glassy polymers. On the investigation of fatigue damage development in polycarbonate. teoksessa M. Papadrakakis, V. Papadopoulos, G. Stefanou, & V. Plevris (Toimittajat), Proc. of VII European Congress on Computational Methods in Applied Sciences and Engineering , ECCOMAS Congress 2016. : M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) . Crete Island, Greece, 5 – 10 June 2016 (Sivut 6675-6687) https://doi.org/10.7712/100016.2289.11047

Hynynen, A. (2016). Extending Professional Fields. Architectural Research and Regional Development. teoksessa K. Kähkönen, & M. Keinänen (Toimittajat), Proceedings of the CIB World Building Congress 2016.: Volume I - Creating built environments of new opportunities (Vuosikerta I, Sivut 372-383). Tampere University of Technology. Department of Civil Engineering.

Zia, N., Viheriälä, J., Koskinen, R., Koskinen, M., Suomalainen, S., & Guina, M. (2016). Fabrication and characterization of broadband superluminescent diodes for 2 μm wavelength. teoksessa Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XX [97680Q] (Proceedings of SPIE; Vuosikerta 9768). SPIE. https://doi.org/10.1117/12.2209720

Smith, J., Kuokkala, V-T., Seidt, J., & Gilat, A. (2016). Full-Field Temperature and Strain Measurement in Dynamic Tension Tests on SS 304. teoksessa Dynamic Behavior of Materials, Volume 1: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics (Sivut 37-44). (Conference proceedings of the Society for Experimental Mechanics). Springer International Publishing. https://doi.org/10.1007/978-3-319-41132-3_6

Pluduma, L., Freimanis, E., Gross, K., Koivuluoto, H., Algate, K., Haynes, D., & Vuoristo, P. (2016). Functionalizing Surface Electrical Potential of Hydroxyapatite Coatings. teoksessa 11th International Conference Medical Applications of Novel Biomaterials and Nanotechnology (Vuosikerta 102, Sivut 12-17). (Advances in Science and Technology; Vuosikerta 102).

Porkka, P. L. (2016). Functional model for organisational and safety culture. teoksessa Chemical Engineering Transactions (Sivut 907-912). (Chemical Engineering Transactions; Vuosikerta 48). Italian Association of Chemical Engineering AIDIC. https://doi.org/10.3303/CET1648152

Hynynen, A. (2016). Future in wood? Timber construction in boosting local development. European Spatial Research and Policy, 23(1), 127-139. https://doi.org/10.1515/esrp-2016-0007

Närhi, M., Tengvall, M., Toivonen, J., Dudley, J. M., & Genty, G. (2016). High Dynamic Range Single-Shot Spectral Measurements of Spontaneous Modulation Instability. teoksessa Frontiers in Optics 2016 [FF2B.1] Optical Society of America (OSA).

Tukiainen, A., Aho, A., Polojärvi, V., Ahorinta, R., & Guina, M. (2016). High efficiency dilute nitride solar cells: Simulations meet experiments. Journal of Green Engineering, 5(3-4), 113-132. [8]. https://doi.org/10.13052/jge1904-4720.5348

Viheriälä, J., Aho, A. T., Mäkelä, J., Salmi, J., Virtanen, H., Leinonen, T., ... Guina, M. (2016). High-power 1550 nm tapered DBR lasers fabricated using soft UV-nanoimprint lithography. teoksessa High-Power Diode Laser Technology and Applications XIV [97330Q] (SPIE Conference Proceedings; Vuosikerta 9733). SPIE. https://doi.org/10.1117/12.2207423

Matikainen, V., Bolelli, G., Koivuluoto, H., Sassatelli, P., Lusvarghi, L., & Vuoristo, P. (2016). High-temperature sliding wear behaviour of thermally sprayed Cr3C2-based coatings. teoksessa Proceedings of The 17th Nordic Symposium on Tribology - NORDTRIB 2016

Sandström, N., Hytti, V., Nenonen, S., & Lonka, K. (2016). How is it sustainable? Identifying key indicators for sustainable educational design. teoksessa L. Gómes Chova, A. López Martínez, & I. Candel Torres (Toimittajat), 10th INTED 2016 Conference Proceedings: 7-9 March, 2016, Valencia, Spain (Sivut 4217-4219). (INTED proceedings). https://doi.org/10.21125/inted.2016.2037

Juuti, T., Kopra, M. J., Rättyä, K., & Lehtonen, T. (2016). How to benefit from learning logs in engineering education? teoksessa 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016 European Society for Engineering Education SEFI.

Vasell, T., Vuolle, M., Petrulaitiene, V., Nenonen, S., & Jylhä, T. (2016). Identifying and measuring customer value - case multi-locational worker. teoksessa S. Nielsen, & P. A. Jensen (Toimittajat), Research papers for EuroFM's 15th research symposium at EFMC2016: 8-9 June 2016 in Milan, Italy (Sivut 143-151). EuroFM.

Lahti, J., Lavonen, J., Lahtinen, K., Johansson, P., Seppänen, T., & Cameron, D. C. (2016). Improved properties for packaging materials by nanoscale surface modification and ALD barrier coating. teoksessa TAPPI International Conference on Nanotechnology for Renewable Materials 2016 (Vuosikerta 2, Sivut 684-706). TAPPI Press.

Okun, O., Kravchenko, Y., & Korpinen, L. (2016). Influence of environmental conditions on EMF levels in a span of overhead transmission lines. Progress in Electromagnetics Research C, 63, 163-171. https://doi.org/10.2528/PIERC16021106

Katko, T. S., & Hukka, J. J. (2016). Institutional development is the key for sustainable water services in the built environment. teoksessa S. Nenonen, & J-M. Junnonen (Toimittajat), Proceedings of the CIB World Building Congress 2016: Volume IV - Understanding impacts and functioning of different solutions (Sivut 419-430). Tampere: Tampere University of Technology. Department of Civil Engineering.

Hukka, J. J., Nyanchaga, E. N., & Katko, T. S. (2016). Integrated urban water management, the green economy and institutional eco-innovations. teoksessa A. Saari, & P. Huovinen (Toimittajat), Proceedings of the CIB World Building Congress 2016: Volume III - Building up business operations and their logic. Shaping materials and technologies (Sivut 260-271). Tampere: Tampere University of Technology. Department of Civil Engineering.

Aalto, T., Harjanne, M., Offrein, B. J., Caër, C., Neumeyr, C., Malacarne, A., ... Melanen, P. (2016). Integrating III-V, Si, and polymer waveguides for optical interconnects: RAPIDO. teoksessa Optical Interconnects XVI [97530D] (Proceedings of SPIE; Vuosikerta 9753). SPIE. https://doi.org/10.1117/12.2214786

Rundgren, A., Joutsenlahti, J., & Mäkinen, J. (2016). Is languaging experienced to improve understanding of structural mechanics? teoksessa 44th SEFI 2016 Annual Conference: 12-15 September 2016 in Tampere, Finland

Lehtonen, T., Juuti, T., Vanhatalo, M., Kopra, M. J., & Rättyä, K. (2016). Leadership instead of grading - The new goals of assessment. teoksessa 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016 European Society for Engineering Education SEFI.

Olsson, T., Väätäjä, H., Ihamäki, H., Jaana, O., Länsisalo, M., Veera, U., & Lehto-Lunden, T. (2016). Lean Software Design, Lean Education? Lessons from a Collaborative University-Industry Seminar. teoksessa SEFI’16 - 44th Annual Conference of the European Society for Engineering Education European Society for Engineering Education SEFI.

Takala, A. (2016). Learning for sustainable water and sanitation services. teoksessa B. Mazijn (Toimittaja), Proceedings of the 8th International Conference on Engineering Education for Sustainable Development (Bruges, 4-7 September 2016) : Building a circular economy together (Sivut 250-258). [D.3.2] Brugge: Instituut vóór Duu rzame Ontwikkeling vzw.

Laudyn, U. A., Kwaśny, M., Jung, P. S., Trippenbach, M., Assanto, G., & Karpierz, M. A. (2016). Linear and nonlinear light beam propagation in chiral nematic liquid crystal waveguides. Photonics Letters of Poland, 8(1), 11-13. https://doi.org/10.4302/plp.2016.1.05

Heikkilä, J., Jääskeläinen, A., & Thitz, O. (2016). Long-term effects of purchasing: fact or fiction? teoksessa Proceedings of 25th IPSERA 2016 conference, 20-23.3.2016, Dortmund, Germany. International Purchasing and Supply Education and Research Association IPSERA.

Lappalainen, K., & Valkealahti, S. (2016). Mathematical Parametrisation of Irradiance Transitions Caused by Moving Clouds for PV System Analysis. teoksessa 32nd European Photovoltaic Solar Energy Conference and Exhibition (32nd EU PVSEC), 20–24 June, 2016, Munich, Germany (Sivut 1485-1489) https://doi.org/10.4229/EUPVSEC20162016-5AO.8.4

Mutanen, A., Niska, H., & Järventausta, P. (2016). Mining smart meter data - Case Finland. teoksessa CIRED Workshop 2016 Institution of Engineering and Technology. https://doi.org/10.1049/cp.2016.0776

Teriö, O., Hämäläinen, J., Uotila, U., Sorri, J., & Saari, A. (2016). Moisture and building processes in Finland. teoksessa K. Kähkönen, & M. Keinänen (Toimittajat), Proceedings of the 20th CIB World Building Congress 2016: Volume I - Creating built environments of new opportunities. (Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics. Report; Vol. 18). (Vuosikerta I, Sivut 907-917). Tampere: Tampere University of Technology. Department of Civil Engineering.

Rasilo, P., Aydin, U., Singh, D., Martin, F., Kouhia, R., Belahcen, A., & Arkkio, A. (2016). Multiaxial magneto-mechanical modelling of electrical machines with hysteresis. teoksessa Proceedings of the 8th IET International Conference on Power Electronics, Machines and Drives, PEMD 2016 IET, The Institution of Engineering and Technology. https://doi.org/10.1049/cp.2016.0183

Yli-Kaakinen, J., Renfors, M., & Tuomivaara, H. (2016). Multicarrier modulation for HF communications. teoksessa 2016 International Conference on Military Communications and Information Systems (ICMCIS) IEEE. https://doi.org/10.1109/ICMCIS.2016.7496542

Lahti, J. (2016). Nanoscale barrier coating on BOPP packaging film by ALD. teoksessa TAPPI PLACE Conference 2016: Exploring New Frontiers (Sivut 493-505). TAPPI Press.

Behailu, B. M., & Mattila, H. (2016). Need of Services and Understanding of Service Providers in Water and Sanitation: A Case of Ethiopia. teoksessa S. Nenonen, & J-M. Junnonen (Toimittajat), Proceedings of the CIB World Building Congress 2016 Volume IV: Understanding impacts and functioning of different solutions (Sivut 431-440). Tampere University of Technology.

Kurki, V. (2016). Negotiating water governance: towards cooperation in contentious groundwater recharge projects. teoksessa Proceedings of the CIB World Building Congress 2016: Volume I - Creating built environments of new opportunities (Sivut 91-102). Tampere University of Technology. Department of Civil Engineering.

Virtanen, J-P., Hyyppä, H., Ståhle, P., Kalliokoski, S., Kähkönen, K. E., Ahlavuo, M., ... Julin, A. (2016). New value chains to construction: advancing products and services. teoksessa N. Achour (Toimittaja), Proceedings of the 20th CIB World Building Congress 2016: Advancing products and services (Vuosikerta V, Sivut 954-965). Tampere University of Technology. Department of Civil Engineering.

Alberucci, A., Piccardi, A., Kravets, N., Buchnev, O., Pannian, J. C., & Assanto, G. (2016). Nonperturbative nonlinear optics in liquid crystals. teoksessa Laser science 2016 [JW4A.12] Optical Society of America (OSA).

Humaloja, J-P., Hämäläinen, T., & Pohjolainen, S. (2016). On Detecting the Shape of an Unknown Object in an Electric Field. teoksessa G. Russo, V. Capasso, G. Nicosia, & V. Romano (Toimittajat), Progress in Industrial Mathematics at ECMI 2014 (Mathematics in Industry; Vuosikerta 22). Springer International Publishing. https://doi.org/10.1007/978-3-319-23413-7

Harmanen, J., & Mikkonen, T. (2016). On Polyglot Programming in the Web. teoksessa Modern Software Engineering Methodologies for Mobile and Cloud Environments (Sivut 102-119). IGI Global. https://doi.org/10.4018/978-1-4666-9916-8.ch006

Fotiadi, A. A., Korobko, D. A., Okhotnikov, O. G., & Zolotovskii, I. O. (2016). Optical fiber amplifier with spectral compression elements for high-power laser pulse generation. teoksessa Nonlinear Optics and its Applications IV (Vuosikerta 9894). [989411] (Proceedings of SPIE; Vuosikerta 9894). SPIE. https://doi.org/10.1117/12.2223637

Kostiainen, E., & Nenonen, S. (2016). Perspective of Social Usability in the Change Processes of an Academic Workplace. teoksessa Proceedings of the CIB World Building Congress 2016: Volume II - Environmental Opportunies and Challenges. Constructing Commitment and Acknowledging Human Experiences (Sivut 688-701). Tampere University of Technology. Department of Civil Engineering.

Pohjola, J., Turunen, J., Lipping, T., & Ikonen, A. T. K. (2016). Probabilistic Framework for Modelling the Evolution of Geomorphic Features in 10,000-Year Time Scale: The Eurajoki River Case. teoksessa Geospatial Data in a Changing World: Selected papers of the 19th AGILE Conference on Geographic Information Science (Sivut 369-382). (Lecture Notes in Geoinformation and Cartography). Springer Verlag. https://doi.org/10.1007/978-3-319-33783-8

Jaakkola, H., Thalheim, B., Kiyoki, Y., & Yoshida, N. (Toimittajat) (2016). Proceedings of the 26th International Conference on Information Modelling and Knowledge Bases - EJC 2016: June 6-10, 2016, Tampere, Finland. . (Tampere University of Technology, Pori Department Publications). Tampere: Tampere University of Technology.

Virtanen, T., Mesaros, A., Heittola, T., Plumbley, M. D., Foster, P., Benetos, E., & Lagrange, M. (Toimittajat) (2016). Proceedings of the Detection and Classification of Acoustic Scenes and Events 2016 Workshop (DCASE2016). Tampere University of Technology. Department of Signal Processing.

Markkula, J., Vilppo, O., Järventausta, P., Hakala, T., & Lähdeaho, T. (2016). Profitability of different li-ion batteries as back-up power in LVDC distribution network. teoksessa CIRED Workshop 2016 https://doi.org/10.1049/cp.2016.0787

Startceva, S., Chandraseelan, J. G., Visa, A., & Ribeiro, A. S. (2016). Quantitative Estimation of Long-living Fluorescent Molecules from Temporal Fluorescence Intensity Data Corrupted by Nonzero-mean Noise. teoksessa BIOSIGNALS 2016 - 9th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 9th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2016 (Sivut 17-24). SCITEPRESS.

Narhi, M., Wetzel, B., Billet, C., Merolla, J-M., Toenger, S., Sylvestre, T., ... Dudley, J. M. (2016). Real Time Measurements of Temporal Rogue Waves and Spontaneous Modulation Instability in Optical Fiber. teoksessa CLEO: QELS_Fundamental Science 2016 [FF2A.7] Optical Society of America. https://doi.org/10.1364/CLEO_QELS.2016.FF2A.7

Jaakkola, H., & Thalheim, B. (2016). Recognising the culture context in information search. teoksessa H. Jaakkola, B. Thalheim, Y. Kiyoki, & N. Yoshida (Toimittajat), Proceedings of the 26th International Conference on Information Modelling and Knowledge Bases - EJC 2016. : June 6-10, 2016, Tampere, Finland. (Vuosikerta 18, Sivut 167-185). (Tampere University of Technology Pori Department Publications; Nro 18). Tampere: Tampere University of Technology Pori Department.

Köliö, A., Lahdensivu, J., & Pentti, M. (2016). Reinforcement Corrosion Modelling in Renovation Strategy for Concrete Facades. teoksessa Proceedings of the CIB World Building Congress 2016: Volume III - Building Up Business Operations and Their Logic. Shaping Materials and Technologies (Sivut 199-211). Tampere University of Technology. Department of Civil Engineering.

Salmisto, A., Postareff, L., & Nokelainen, P. (2016). Relations between civil engineering students’ approaches to learning, perceptions of the development of professional skills and perceived workload. teoksessa 44th Annual Conference of the European Society for Engineering Education SEFI2016: Proceedings: 12-15 September 2016, Tampere, Finland

Bragadin, M. A., & Kähkönen, K. (2016). Resource – Space Charts for Construction Workspace Scheduling. teoksessa Proceedings of the CIB World Building Congress 2016: Volume III - Building Up Business Operations and Their Logic. Shaping Materials and Technologies (Sivut 677-688). Tampere University of Technology. Department of Civil Engineering.

Kumpulainen, L., Kauhaniemi, K., Repo, S., Valkealahti, S., Honkapuro, S., Partanen, J., ... Järventausta, P. (2016). Roadmap towards the vision of the future power system and electricity market. teoksessa CIRED Workshop 2016 Institution of Engineering and Technology. https://doi.org/10.1049/cp.2016.0690

Naaranoja, M., Kähkönen, K., & Keinänen, M. (2016). Role of Power and Sense Making in the Briefing of a Small Renovation Project. teoksessa Proceedings of the CIB World Building Congress 2016: Volume I - Creating built environments of new opportunities (Sivut 611-621). Tampere University of Technology. Department of Civil Engineering.

Pietilä, P., Arvonen, V., & Katko, T. (2016). Role of Water Cooperatives in Water Service Production - Lessons from Finland and Denmark. teoksessa N. Achour (Toimittaja), Proceedings of the 20th CIB World Building Congress 2016: May 30 – June 3, 2016 Tampere Finland (Vuosikerta V, Sivut 1152-1161). Tampere University of Technology.

Saarnisaari, H., Hovinen, V., Tuomivaara, H., & Yli-Kaakinen, J. (2016). Short range HF radio channel measurements: Search for one path channels. teoksessa 2016 International Conference on Military Communications and Information Systems (ICMCIS) https://doi.org/10.1109/ICMCIS.2016.7496559

Frantc, V. A., Makov, S. V., Voronin, V. V., Marchuk, V. I., Semenishchev, E. A., Egiazarian, K. O., & Agaian, S. (2016). Simultenious binary hash and features learning for image retrieval. teoksessa Mobile Multimedia/Image Processing, Security, and Applications 2016 [986902] (SPIE Conference Proceedings; Vuosikerta 9869). SPIE. https://doi.org/10.1117/12.2223605

Ryczkowski, P., Barbier, M., Friberg, A. T., Dudley, J. M., & Genty, G. (2016). Single Shot Time Domain Ghost Imaging using Wavelength Multiplexing. teoksessa Frontiers in Optics 2016 [FTh5C.6] Optical Society of America (OSA). https://doi.org/10.1364/FIO.2016.FTh5C.6

Hakkarainen, T., Tommila, J., Schramm, A., Simonen, J., Niemi, T., Strelow, C., ... Guina, M. (2016). Site-controlled InAs Quantum Dots for Plasmonics. teoksessa Conference on Lasers and Electro-Optics 2016: QELS_Fundamental Science [FM1B.3 ] OSA - The Optical Society. https://doi.org/10.1364/CLEO_QELS.2016.FM1B.3

Adavanne, S., Parascandolo, G., Pertilä, P., Heittola, T., & Virtanen, T. (2016). Sound Event Detection in Multichannel Audio Using Spatial and Harmonic Features. teoksessa Proceedings of the Detection and Classification of Acoustic Scenes and Events 2016 Workshop (DCASE2016) (Sivut 6-10). Tampere University of Technology. Department of Signal Processing.

Airo, K., Vaara, L., & Nenonen, S. (2016). Spatial borders and affordances of a temporary school building – Enhancing the school engagement and learning experience. teoksessa Proceedings of the CIB World Building Congress 2016: Volume II - Environmental Opportunies and Challenges. Constructing Commitment and Acknowledging Human Experiences (Sivut 715-725). Tampere University of Technology. Department of Civil Engineering.

Mäkelä, A-M., Ali-Löytty, S., Humaloja, J-P., Joutsenlahti, J., Kauhanen, J., & Kaarakka, T. (2016). STACK assignments in university mathematics education. teoksessa Proceedings of the 44th SEFI Conference, 12 - 15 September 2016, Tampere, Finland European Society for Engineering Education SEFI.

Garifullin, M. R., Barabash, A. V., Naumova, E. A., Zhuvak, O. V., Jokinen, T., & Heinisuo, M. (2016). Surrogate modeling for initial rotational stiffness of welded tubular joints. Magazine of Civil Engineering, 63(3), 53-76. https://doi.org/10.5862/MCE.63.4

Rantanen, P., Sillberg, P., Soini, J., & Jaakkola, H. (2016). Tag suggestions from social media profiles. teoksessa H. Jaakkola, B. Thalheim, Y. Kiyoki, & N. Yoshida (Toimittajat), Proceedings of the 26th International Conference on Information Modelling and Knowledge Bases - EJC 2016. : June 6-10, 2016, Tampere, Finland. (Vuosikerta 18, Sivut 387-394). (Tampere University of Technology Pori Department Publications). Tampere: Tampere University of Technology.

Hosseini, S. S. S., Jamali, M. M., Astola, J., & Gorsevski, P. V. (2016). Target tracking via combination of particle filter and optimisation techniques. International Journal of Mathematical Modelling and Numerical Optimization, 7(2), 212-229. https://doi.org/10.1504/IJMMNO.2016.077068

Jääskeläinen, A., Thitz, O., & Heikkilä, J. (2016). The role of the purchasing function in non-financial value creation. teoksessa 25th Proceedings of IPSERA 2016 conference, : 20-23.3.2016, Dortmund, Germany.

Huhtelin, M., & Nenonen, S. (2016). The Workplace for Researchers – Enhancing Concentration and Face-to-face Interaction. teoksessa Proceedings of the CIB World Building Congress 2016: Volume I - Creating built environments of new opportunities (Sivut 753-764). Tampere University of Technology. Department of Civil Engineering.

Petrulaitiene, V., Rytkönen, E., & Nenonen, S. (2016). Towards responsive workspaces - identification of service paths for time-and-place independent work. teoksessa N. Achour (Toimittaja), Proceedings of the 20th CIB World Building Congress 2016: May 30 – June 3, 2016 Tampere Finland (Vuosikerta V, Sivut 1141-1151). Tampere University of Technology.

Ylinen, A., Mäkinen, J., & Kouhia, R. (2016). Two models for hydraulic cylinders in flexible multibody simulations. teoksessa Computational Methods for Solids and Fluids: Multiscale Analysis, Probability Aspects and Model Reduction (Sivut 463-493). (Computational Methods in Applied Sciences; Vuosikerta 41). Springer. https://doi.org/10.1007/978-3-319-27996-1_17

Turquet, L., Kauranen, M., & Bautista, G. (2016). Use of high-order beams to calibrate spatial light modulators for microscopy.

Ilomets, S., Kalamees, T., & Lahdensivu, J. (2016). Validation of the method to evaluate the corrosion propagation stage by hygrothermal simulation. teoksessa CESB 2016 - Central Europe Towards Sustainable Building 2016: Innovations for Sustainable Future (Sivut 1113-1120). Czech Technical University in Prague.

Leivo, V., Aaltonen, A., Turunen, M., Du, L., Kiviste, M., & Haverinen-Shaughnessy, U. (2016). Ventilation rates and CO2-levels before and after energy retrofit in Finnish apartment buildings. teoksessa P. Kvols Heiselberg (Toimittaja), CLIMA 2016 - Proceedings of the 12th REHVA World Congress. Aalborg. Aalborg University. Department of Civil Engineering. : Volume 1. Building Retrofit (Vuosikerta 1). [192 (in vol 1)] Aalborg: Aalborg university, Department of Civil Engineering.

Nyuppieva, E., Laine, T., & Lyly-Yrjänäinen, J. (2016). Visual narratives in the value chain of new management accounting knowledge. teoksessa 10th Conference On New Directions In Management Accounting: Brussels, Belgium, December 14-16, 2016

Müller, P., Raitoharju, M., Ali-Löytty, S., Wirola, L., & Piche, R. (2016). Обзор параметрических методов позиционирования на основе концепции отпечатка пальца. Giroskopiya I Navigatsiya, 24(1), 3-35. https://doi.org/10.17285/0869-7035.2016.24.1.003-035

Tappura, S., Hyytinen, T., Kivistö-Rahnasto, J., Nenonen, N., & Vasara, J. (2015). Turvallisuuden johtajat - Esimiesten johtajuus, osaaminen ja sitoutuminen. Tampere: Tampereen teknillinen yliopisto; Tampereen yliopisto.

Naumenko, V., Solodovnik, V., Totsky, A., Zelensky, A., & Astola, J. (2015). Bispectrum-based demodulation technique using triple-channel heterodyning of triplet-signal. teoksessa 2015 Second International Scientific-Practical Conference Problems of Infocommunications Science and Technology (PIC S&T) (Sivut 224-226). IEEE. https://doi.org/10.1109/INFOCOMMST.2015.7357319

Rubel, O., Ponomarenko, N., Lukin, V., Astola, J., & Egiazarian, K. (2015). HVS-based local analysis of denoising efficiency for DCT-based filters. teoksessa 2015 2nd International Scientific-Practical Conference Problems of Infocommunications Science and Technology, PIC S and T 2015 - Conference Proceedings (Sivut 189-192). IEEE. https://doi.org/10.1109/INFOCOMMST.2015.7357309

Kozhemiakina, N., Lukin, V., Ponomarenko, N., Akulynichev, A., Astola, J., & Egiazarian, K. (2015). Method of data compression for traffic monitoring. teoksessa 2015 2nd International Scientific-Practical Conference Problems of Infocommunications Science and Technology, PIC S and T 2015 - Conference Proceedings (Sivut 153-156). IEEE. https://doi.org/10.1109/INFOCOMMST.2015.7357299

Seppänen, M., Dedehayir, O., Still, K., Valkokari, K., & Suominen, A. (2015). Platform Competences to Enhance Network Effects in Business Ecosystems. teoksessa 2015 ISPIM Innovation Summit in Brisbane, Australia - 6-9 December 2015 International Society for Professional Innovation Management ISPIM.

Kuuliala, L., Pippuri, T., Hultman, J., Auvinen, S-M., Kolppo, K., Nieminen, T., ... Jääskeläinen, E. (2015). Preparation and antimicrobial characterization of silver-containing packaging materials for meat. Food Packaging and Shelf Life, 6, 53-60. [67]. https://doi.org/10.1016/j.fpsl.2015.09.004

Bartsch, H., Himmerlich, M., Fischer, M., Demko, L., Hyttinen, J., & Schober, A. (2015). LTCC-Based Multi-Electrode Arrays for 3D in Vitro Cell Cultures. Journal of Ceramic Science and Technology, 6(4), 315-324. https://doi.org/10.4416/JCST2015-00056

Karjalainen, P., Timonen, H., Saukko, E., Kuuluvainen, H., Saarikoski, S., Aakko-Saksa, P., ... Rönkkö, T. (2015). Time-resolved characterization of primary and secondary particle emissions of a modern gasoline passenger car. Atmospheric Chemistry and Physics Discussions, 15(22), 33253-33282. https://doi.org/10.5194/acpd-15-33253-2015

Hackenberg, J., Spiecker, H., Calders, K., Disney, M., & Raumonen, P. (2015). SimpleTree: An Efficient Open Source Tool to Build Tree Models from TLS Clouds. Forests: Open Access Journal, 6(11), 4245-4294. https://doi.org/10.3390/f6114245

Sariola-Leikas, E. (2015). Organic Chromophores in Self-Assembled Monolayers and Supramolecular Arrays. (Tampere University of Technology. Publication; Vuosikerta 1334). Tampere University of Technology.

Naukkarinen, J. (2015). What Engineering Scientists Know and How They Know It: Towards Understanding the Philosophy of Engineering Science in Finland. (Tampere University of Technology. Publication; Vuosikerta 1344). Tampere University of Technology.

Tukiainen, M., Helander, N., & Mäkinen, M. (2015). MYSTERY SHOPPERS RECOGNISING KNOWLEDGE SHARING BARRIERS IN HIGHER EDUCATION. teoksessa ICERI2015 Proceedings: 8th annual International Conference of Education, Research and Innovation Seville (Spain). 16th - 18th of November, 2015.

Tukiainen, M., Mäkinen, M., & Helander, N. (2015). University Students’ Perceptions of Academic Writing: An Academic Literacies Perspective. teoksessa ICERI2015 Proceedings: 8th annual International Conference of Education, Research and Innovation Seville (Spain). 16th - 18th of November, 2015. (Sivut 7589-7595)

Yang, H. (2015). Markov Chain Monte Carlo Estimation of Stochastic Volatility Models with Finite and Infinite Activity Lévy Jumps: Evidence for Efficient Models and Algorithms. (Tampere University of Technology. Publication; Vuosikerta 1331). Tampere University of Technology.

Kaarakka, T. (2015). Fractional Ornstein-Uhlenbeck Processes. (Tampere University of Technology. Publication; Vuosikerta 1338). Tampere University of Technology.

Jussila, J. (2015). Social Media in Business-to-Business Companies' Innovation. (Tampere University of Technology. Publication; Vuosikerta 1333). Tampere University of Technology.

Du, L., Leivo, V., Prasauskas, T., Turunen, M., Kiviste, M., Martuzevicius, D., & Haverinen-Shaughnessy, U. (2015). Energy Retrofits in Multi-family Buildings in North-east Europe: The Impacts on Thermal Conditions. Energy Procedia, 78, 860-864. https://doi.org/10.1016/j.egypro.2015.11.008

Hannus, S. (2015). Value Creation in Private Equity: A Case Study of Outperforming Buyouts in the Nordic Countries. (Tampere University of Technology. Publication; Vuosikerta 1328). Tampere University of Technology.

Hongisto, V., Kylliäinen, M., & Hyönä, J. (2015). ÄKK-hankkeen suositukset tulevaisuuden ääneneristysmääräyksiä koskien. teoksessa Rakennusfysiikka 2015 (Sivut 561-566). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Kovalainen, V., & Kylliäinen, M. (2015). Menetelmä parvekelasien ääneneristävyyden mitoittamiseksi liikennemelualueilla. teoksessa Rakennusfysiikka 2015 (Sivut 617-622). Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Junttila, H., Laukkarinen, A., & Vinha, J. (2015). Puurunkoisten tuuletettujen yläpohjien kosteustekninen toiminta. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. (Sivut 77-82). (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; Nro 4). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Latvanne, P., & Kylliäinen, M. (2015). Puuvälipohjien akustiset ominaisuudet. teoksessa Rakennusfysiikka 2015 (Sivut 567-572). Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Annila, P., Lahdensivu, J., Pikkuvirta, J., & Pakkala, T. (2015). By64 Tuulettuvat julkisivut 2016 -suunnittelu- ja toteusohjeen laadinta. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere (Sivut 109-114). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Teriö, O., & Sorri, J. (2015). Energiatehokkuus rakennusalan ammattityövoiman täydennyskoulutuksessa. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere (Sivut 97-102). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Kankkunen, T., & Kero, P. (2015). Hometalolle suoritettavat toimenpiteet ja niiden valinta - case-esimerkki. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere (Sivut 265-270). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Tuominen, E., & Vinha, J. (2015). Kapillaaristen vedenimuominaisuuksien määrittämiseen sopivan vapaan vedenimukoelaitteiston kehittäminen. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere (Sivut 233-238). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Hilliaho, K., Nordquist, B., & Wallentén, P. (2015). Koko Julkisivua peittävän lasijulkisivun vaikutus Etelä-Ruotsissa sijaitsevan rakennuksen energiatehokkuuteen. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere (Sivut 509-516). (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu 4; Nro 4). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Tuominen, E., & Vinha, J. (2015). Laastien vedenimukertoimen määrittämisen virhelähdekokeet. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere (Sivut 239-244). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Ruuska, T., & Vinha, J. (2015). Laastin ja betonin lämmönjohtavuuden ja ominaislämpökapasiteetin määrittäminen lämpövirtalevylaitteella. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere (Sivut 227-232). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Laukkarinen, A., & Hilliaho, K. (2015). Lasitetun parvekkeen lämpötilan ja lämpöhäviöiden laskenta. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere (Sivut 181-186). (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; Nro 4). Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Marttila, T., Suonketo, J., Kero, P., & Annila, P. (2015). Onnistumistekijät valtion tukemissa homekorjaushankkeissa. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut, 20-22.10.2015, Tampere (Vuosikerta 4, Sivut 253-258). [152] Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Heljo, J., & Kauppinen, T. (2015). Pystytäänkö haitallisia ilmanvaihtovikoja havaitsemaan ja poistamaan. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere (Sivut 325-330). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Köliö, A., Hohti, H., Pakkala, T., Laukkarinen, A., Lahdensivu, J., & Mattila, J. (2015). Raudoitteiden korroosionopeuden määrittäminen betonijulkisivussa korkean aikaresoluution säädatan avulla. teoksessa Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. (Sivut 195-202). (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; Nro 4). Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Vinha, J., Hedman, M., Sirén, K., Harsia, P., Pentti, M., Teriö, O., ... Pihlajamaa, P. (2015). Uudessa COMBI-hankkeessa tutkitaan energiatehokkaan palvelurakentamisen haasteita ja ratkaisuja. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. (Sivut 487-496). (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; Nro 4). Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Vinha, J. (2015). Uusi Rakennusfysiikan käsikirja - perustiedot rakennusfysikaalisesta suunnittelusta ja tutkimuksista. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere (Sivut 115-120). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Pekkola, S. (2015). Enterprise architecture as strategy, practice, or approach. teoksessa 4th Innovation in Information Infrastructures (III) Workshop Warwick, UK: University of Warwick.

Karjalainen, P. (2015). Muuttuvat ajotilanteet aiheuttavat uudentyyppisiä ajoneuvojen hiukkaspäästöjä. Ympäristö ja terveys, 46(6), 28-31.

Nurminen, H., Ardeshiri, T., Piche, R., & Gustafsson, F. (2015). A NLOS-robust TOA positioning filter based on a skew-t measurement noise model. teoksessa 2015 International Conference on Indoor Positioning and Indoor Navigation (IPIN) (Sivut 1-7). IEEE. https://doi.org/10.1109/IPIN.2015.7346786

Rinkinen, J., & Elo, L. (2015). Clean Components of Fluid Power System Reduce Maintenance Costs. teoksessa Maintenance, Condition Monitoring and Diagnostics; Maintenance Performance Measurement and Management: MCMD 2015 and MPMM 2015 [2 (2015-10-01)]

Sislian, R., Da Silva, F. V., Gedraite, R., Jokinen, H., & An, D. K. R. (2015). Development of a Low-Cost Fuzzy Gain Schedule Neutralization Control System. teoksessa WCECS 2015 - World Congress on Engineering and Computer Science 2015 (Vuosikerta II, Sivut 575-578). (Lecture Notes in Engineering and Computer Science; Vuosikerta 2220). Newswood Limited.

Karimi, N., Kunwar, P., & Toivonen, J. (2015). Direct Laser Writing of Fluorescent Silver Nanoclusters in Polyvinyl Alcohol Films. teoksessa Frontiers in Optics 2015: Proceedings [FTu5E.4] https://doi.org/10.1364/FIO.2015.FTu5E.4

Saari, S., Karjalainen, P., Kalliohaka, T., Taipale, A., & Rönkkö, T. (2015). Generation of characteristic traffic emission aerosol in particulate filter collection efficiency tests. teoksessa The 11th International Conference on Industrial Ventilation, Shanghai, China

Pakkala, T., Lemberg, A-M., Köliö, A., & Lahdensivu, J. (2015). Ilmastonmuutoksen vaikutus betonijulkisivujen vaurioitumisen etenemiseen. teoksessa J. Vinha, & T. Ruuska (Toimittajat), Rakennusfysiikka 2015: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut, 20.-22.10.2015, Tampere (Sivut 203-210). Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka.

Järveläinen, M., Yli-Hallila, T., Salpavaara, T., Verho, J., Vilkko, M., & Levänen, E. (2015). Kolloidisten suspensioiden online -analysointi: tutkimuksesta liiketoimintaa. Materia, (5/2015), 54-57.

Frankberg, E. J. (2015). Suomen keraaminen seura - Keramiska sällskapet i Finland. Materia, 5, 58-58.

Viheriäkoski, T., Kohtamäki, J., Peltoniemi, T., & Tamminen, P. (2015). Benchmarking of Factory Level ESD Control. teoksessa Electrical Overstress/Electrostatic Discharge Symposium Proceedings 2015 (Vuosikerta 2015). [6B.1] USA: IEEE COMPUTER SOC. https://doi.org/10.1109/EOSESD.2015.7314769