Veber, A., M.M. Smedskjaer ja D. de Ligny. "Relaxation behavior of densified sodium aluminoborate glass". Acta Materialia. 2020, 198. 153-167. https://doi.org/10.1016/j.actamat.2020.07.068

Ojha, N. et al. "Effect of heat-treatment on the upconversion of NaYF4:Yb3+, Er3+ nanocrystals containing silver phosphate glass". Journal of Non-Crystalline Solids. 2020. 544. https://doi.org/10.1016/j.jnoncrysol.2020.120243

Kleiven, David ja Jaakko Akola. "Precipitate formation in aluminium alloys: Multi-scale modelling approach". Acta Materialia. 2020, 195. 123-131. https://doi.org/10.1016/j.actamat.2020.05.050

Laurikainen, P. et al. "Identification and compensation of error sources in the microbond test utilising a reliable high-throughput device". Composites Part A: Applied Science and Manufacturing. 2020. 137. https://doi.org/10.1016/j.compositesa.2020.105988

Tainio, J. M. et al. "Structure and in vitro dissolution of Mg and Sr containing borosilicate bioactive glasses for bone tissue engineering". Journal of Non-Crystalline Solids. 2020. 533. https://doi.org/10.1016/j.jnoncrysol.2020.119893

Hongisto, M. et al. "Transparent Yb3+ doped phosphate glass-ceramics". Ceramics International. 2020. https://doi.org/10.1016/j.ceramint.2020.01.121

Eyckens, Daniel J. et al. "Examining interfacial interactions in a range of polymers using poly(ethylene oxide) functionalized carbon fibers". Composites Part A: Applied Science and Manufacturing. 2020. 138. https://doi.org/10.1016/j.compositesa.2020.106053

Karhu, Marjaana et al. "Mining tailings as a raw material for glass-bonded thermally sprayed ceramic coatings: Microstructure and properties". Journal of the European Ceramic Society. 2020, 40(12). 4111-4121. https://doi.org/10.1016/j.jeurceramsoc.2020.04.038

Del Cerro, Paloma Roldán et al. "Novel borosilicate bioactive scaffolds with persistent luminescence". Biomedical Glasses. 2020, 6(1). 1-9. https://doi.org/10.1515/bglass-2020-0001

Ruuskanen, J. et al. "Modelling thermodynamics in a high erature superconducting dipole magnet: An inverse problem based approach". Superconductor Science and Technology. 2019. 32(9). https://doi.org/10.1088/1361-6668/ab2bc9

Hannula, M. et al. "Highly efficient charge separation in model Z-scheme TiO2/TiSi2/Si photoanode by micropatterned titanium silicide interlayer". Acta Materialia. 2019, 174. 237-245. https://doi.org/10.1016/j.actamat.2019.05.032

Jokinen, J. ja M. Kanerva. "Simulation of Delamination Growth at CFRP-Tungsten Aerospace Laminates Using VCCT and CZM Modelling Techniques". Applied Composite Materials. 2019, 26(3). 709-721. https://doi.org/10.1007/s10443-018-9746-5

Zhang, Zhifang et al. "Vibration-based delamination detection in curved composite plates". Composites Part A: Applied Science and Manufacturing. 2019, 119. 261-274. https://doi.org/10.1016/j.compositesa.2019.02.002

Edwards, Thomas Edward James et al. "Transverse deformation of a lamellar TiAl alloy at high temperature by in situ microcompression". Acta Materialia. 2019, 166. 85-99. https://doi.org/10.1016/j.actamat.2018.11.050

Karhu, Marjaana et al. "Mining tailings as raw materials for reaction-sintered aluminosilicate ceramics: Effect of mineralogical composition on microstructure and properties". Ceramics International. 2019, 45(4). 4840-4848. https://doi.org/10.1016/j.ceramint.2018.11.180

Kanerva, M. et al. "DLC-treated aramid-fibre composites: Tailoring nanoscale-coating for macroscale performance". Composites Science and Technology. 2019, 171. 62-69. https://doi.org/10.1016/j.compscitech.2018.11.043

Edwards, Thomas Edward James et al. "Deformation of lamellar γ-TiAl below the general yield stress". Acta Materialia. 2019, 163. 122-139. https://doi.org/10.1016/j.actamat.2018.09.061

Lopez-Iscoa, Pablo et al. "Design, processing, and characterization of an optical core-bioactive clad phosphate fiber for biomedical applications". JOURNAL OF THE AMERICAN CERAMIC SOCIETY. 2019. https://doi.org/10.1111/jace.16553

Mereuta, Alexandru et al. "Flip-chip Wafer-fused OP-VECSELs emitting 3.65 W at the 1.55-μm waveband". IEEE Journal of Selected Topics in Quantum Electronics. 2019. 25(6). https://doi.org/10.1109/JSTQE.2019.2922819

Passananti, Monica et al. "How well can we predict cluster fragmentation inside a mass spectrometer?". Chemical Communications. 2019, 55(42). 5946-5949. https://doi.org/10.1039/c9cc02896j

Mishra, Ayush et al. "In-vitro dissolution characteristics and human adipose stem cell response to novel borophosphate glasses". Journal of Biomedical Materials Research - Part A. 2019. https://doi.org/10.1002/jbm.a.36722

Barberi, Jacopo et al. "Mechanical characterization of pore-graded bioactive glass scaffolds produced by robocasting". Biomedical Glasses. 2019, 5(1). 140-147. https://doi.org/10.1515/bglass-2019-0012

Veber, Alexander et al. "Nano-structured optical fibers made of glass-ceramics, and phase separated and metallic particle-containing glasses". Fibers. 2019. 7(12). https://doi.org/10.3390/fib7120105

Narongthong, Jirawat et al. "An efficient highly flexible strain sensor: Enhanced electrical conductivity, piezoresistivity and flexibility of a strongly piezoresistive composite based on conductive carbon black and an ionic liquid". Composites Part A: Applied Science and Manufacturing. 2018, 113. 330-338. https://doi.org/10.1016/j.compositesa.2018.08.004

Maina, Martin Ruthandi et al. "High surface quality welding of aluminum using adjustable ring-mode fiber laser". Journal of Materials Processing Technology. 2018, 258. 180-188. https://doi.org/10.1016/j.jmatprotec.2018.03.030

Kaunisto, Kimmo et al. "The effect of carbon and nickel additions on the precursor synthesis of Cr3C2-Ni nanopowder". Ceramics International. 2018, 44(8). 9338-9346. https://doi.org/10.1016/j.ceramint.2018.02.146

Ojha, N. et al. "Influence of the phosphate glass melt on the corrosion of functional particles occurring during the preparation of glass-ceramics". Ceramics International. 2018, 44(10). 11807-11811. https://doi.org/10.1016/j.ceramint.2018.03.267

Goyos-Ball, Lidia et al. "The effects of laser patterning 10CeTZP-Al2O3 nanocomposite disc surfaces: Osseous differentiation and cellular arrangement in vitro". Ceramics International. 2018, 44(8). 9472-9478. https://doi.org/10.1016/j.ceramint.2018.02.164

Nugteren, J. Van et al. "Powering of an HTS dipole insert-magnet operated standalone in helium gas between 5 and 85 K". Superconductor Science and Technology. 2018. 31(6). https://doi.org/10.1088/1361-6668/aab887

Magarkar, Aniket et al. "Membrane bound COMT isoform is an interfacial enzyme: General mechanism and new drug design paradigm". Chemical Communications. 2018, 54(28). 3440-3443. https://doi.org/10.1039/c8cc00221e

Glorieux, Benoit et al. "Better understanding of the role of SiO2, P2O5 and Al2O3 on the spectroscopic properties of Yb3+ doped silica sol-gel glasses". Journal of Non-Crystalline Solids. 2018, 482. 46-51. https://doi.org/10.1016/j.jnoncrysol.2017.12.021

Orell, Olli et al. "Characterization of elastic constants of anisotropic composites in compression using digital image correlation". Composite Structures. 2018, 185. 176-185. https://doi.org/10.1016/j.compstruct.2017.11.008

Järvinen, Henri et al. "Effect of paint baking treatment on the properties of press hardened boron steels". Journal of Materials Processing Technology. 2018, 252. 90-104. https://doi.org/10.1016/j.jmatprotec.2017.08.027

Durandin, Nikita A. et al. "Efficient photon upconversion at remarkably low annihilator concentrations in a liquid polymer matrix: when less is more". Chemical Communications. 2018, 54(99). 14029-14032. https://doi.org/10.1039/c8cc07592a

Kiilakoski, J. et al. "Evaluating the toughness of APS and HVOF-sprayed Al2O3-ZrO2-coatings by in-situ- and macroscopic bending". Journal of the European Ceramic Society. 2018, 38(4). 1908-1918. https://doi.org/10.1016/j.jeurceramsoc.2017.11.056

Saarinen, M. et al. "Persistent luminescent particles containing bioactive glasses: Prospect toward tracking in-vivo implant mineralization using biophotonic ceramics". Journal of the European Ceramic Society. 2018, 38(1). 287-295. https://doi.org/10.1016/j.jeurceramsoc.2017.08.024

Layek, Rama K. et al. "Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic". Composites Part B : Engineering. 2017, 128. 155-163. https://doi.org/10.1016/j.compositesb.2017.07.010

Sethi, Jatin et al. "The effect of multi-wall carbon nanotube morphology on electrical and mechanical properties of polyurethane nanocomposites". Composites Part A: Applied Science and Manufacturing. 2017, 102. 305-313. https://doi.org/10.1016/j.compositesa.2017.08.014

Sarlin, Essi et al. "The effect of matrix type on ageing of thick vinyl ester glass-fibre-reinforced laminates". Composite Structures. 2017, 168. 840–850. https://doi.org/10.1016/j.compstruct.2017.02.086

Mentink, M. ja T Salmi. "Quench absorption coils: A quench protection concept for high-field superconducting accelerator magnets". Superconductor Science and Technology. 2017. 30(6). https://doi.org/10.1088/1361-6668/aa6678

Lopez-Iscoa, Pablo et al. "Effect of the addition of Al2O3, TiO2 and ZnO on the thermal, structural and luminescence properties of Er3+-doped phosphate glasses". Journal of Non-Crystalline Solids. 2017, 460. 161-168. https://doi.org/10.1016/j.jnoncrysol.2017.01.030

Karhu, M. et al. "Reaction heat utilization in aluminosilicate-based ceramics synthesis and sintering". Journal of Ceramic Science and Technology. 2017, 8(1). 101-112. https://doi.org/10.4416/JCST2016-00094

Ruuskanen, J. et al. "Electromagnetic nonlinearities in a Roebel-cable-based accelerator magnet prototype: Variational approach". Superconductor Science and Technology. 2017. 30(2). https://doi.org/10.1088/1361-6668/30/2/024008

Morandi, Antonio et al. "The 5th international workshop on numerical modelling of high temperature superconductors". Superconductor Science and Technology. 2017. 30(8). https://doi.org/10.1088/1361-6668/aa7676

Javanainen, Matti et al. "Two cations, two mechanisms: Interactions of sodium and calcium with zwitterionic lipid membranes". Chemical Communications. 2017, 53(39). 5380-5383. https://doi.org/10.1039/c7cc02208e

Cui, S. et al. "Novel oxyfluorophosphate glasses and glass-ceramics". Journal of Non-Crystalline Solids. 2016, 445-446. 40-44. https://doi.org/10.1016/j.jnoncrysol.2016.05.005

Calejo, Maria Teresa et al. "Honeycomb porous films as permeable scaffold materials for human embryonic stem cell-derived retinal pigment epithelium". Journal of Biomedical Materials Research. Part A. 2016, 104(7). 1646-1656. https://doi.org/10.1002/jbm.a.35690

Soltani, I. et al. "Thermal, structural and optical properties of Er3+ doped phosphate glasses containing silver nanoparticles". Journal of Non-Crystalline Solids. 2016, 438. 67-73. https://doi.org/10.1016/j.jnoncrysol.2015.12.022

Kanerva, Ulla et al. "Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis". International Journal of Refractory Metals and Hard Materials. 2016, 56. 69-75. https://doi.org/10.1016/j.ijrmhm.2015.11.014

Bansod, Naresh D. et al. "Compatibilization of natural rubber/nitrile rubber blends by sol–gel nano-silica generated by in situ method". JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY. 2016, 80(2). 548–559. https://doi.org/10.1007/s10971-016-4114-0

Hupa, Leena et al. "Dissolution behavior of the bioactive glass S53P4 when sodium is replaced by potassium, and calcium with magnesium or strontium". Journal of Non-Crystalline Solids. 2016, 41-46. https://doi.org/10.1016/j.jnoncrysol.2015.03.026

Järveläinen, Matti et al. "Thermal flow permeametry - A rapid method for finding local changes in flow channels". Composites Part A: Applied Science and Manufacturing. 2015, 79. 138-145. https://doi.org/10.1016/j.compositesa.2015.09.013

Massera, J. et al. "Processing and characterization of phosphate glasses containing CaAl2O4:Eu2+,Nd3+ and SrAl2O4:Eu2+,Dy3+ microparticles". Journal of the European Ceramic Society. 2015, 35(14). 3863-3871. https://doi.org/10.1016/j.jeurceramsoc.2015.06.031

Kanerva, Ulla et al. "Evaluation of crushing strength of spray-dried MgAl2O4 granule beds". Ceramics International. 2015, 41(7). 8494-8500. https://doi.org/10.1016/j.ceramint.2015.03.056

Ribeiro, Clarisse et al. "Dynamic piezoelectric stimulation enhances osteogenic differentiation of human adipose stem cells". Journal of Biomedical Materials Research. Part A. 2015, 103(6). 2172-2175. https://doi.org/10.1002/jbm.a.35368

Sorkio, Anni E. et al. "Biomimetic collagen I and IV double layer Langmuir-Schaefer films asmicroenvironment for human pluripotent stem cell derived retinal pigment epithelial cells". Biomaterials. 2015, 51. 257-269. https://doi.org/10.1016/j.biomaterials.2015.02.005

Parssinen, Jenita et al. "Enhancement of adhesion and promotion of osteogenic differentiation of human adipose stem cells by poled electroactive poly(vinylidene fluoride)". Journal of Biomedical Materials Research. Part A. 2015, 103(3). 919-928. https://doi.org/10.1002/jbm.a.35234

Rooj, S. et al. "'Expanded organoclay' assisted dispersion and simultaneous structural alterations of multiwall carbon nanotube (MWCNT) clusters in natural rubber". Composites Science and Technology. 2015, 107. 36-43. https://doi.org/10.1016/j.compscitech.2014.11.018

Kalimeri, Maria, Philippe Derreumaux ja Fabio Sterpone. "Are coarse-grained models apt to detect protein thermal stability? the case of OPEP force field". Journal of Non-Crystalline Solids. 2015, 407. 494-501. https://doi.org/10.1016/j.jnoncrysol.2014.07.005

Pärnänen, T. et al. "Debonding and impact damage in stainless steel fibre metal laminates prior to metal fracture". Composite Structures. 2015, 119. 777-786. https://doi.org/10.1016/j.compstruct.2014.09.056

Ojuva, Arto et al. "Mechanical performance and CO2 uptake of ion-exchanged zeolite A structured by freeze-casting". Journal of the European Ceramic Society. 2015, 35(9). 2607-2618. https://doi.org/10.1016/j.jeurceramsoc.2015.03.001

Stumpel, Jelle E., Dirk J. Broer ja Albertus P H J Schenning. "Stimuli-responsive photonic polymer coatings". Chemical Communications. 2014, 50(100). 15839-15848. https://doi.org/10.1039/c4cc05072j

Zhang, Dawei et al. "A 3D Alzheimer's disease culture model and the induction of P21-activated kinase mediated sensing in iPSC derived neurons". Biomaterials. 2014, 35(5). 1420-1428. https://doi.org/10.1016/j.biomaterials.2013.11.028

Le, H. H. et al. "Dispersion and distribution of carbon nanotubes in ternary rubber blends". Composites Science and Technology. 2014, 90. 180-186. https://doi.org/10.1016/j.compscitech.2013.11.008

Suhonen, T. et al. "Residual stress development in cold sprayed Al, Cu and Ti coatings". Acta Materialia. 2013, 61(17). 6329-6337. https://doi.org/10.1016/j.actamat.2013.06.033

Rooj, Sandip et al. "Influence of " expanded clay" on the microstructure and fatigue crack growth behavior of carbon black filled NR composites". Composites Science and Technology. 2013, 76. 61-68. https://doi.org/10.1016/j.compscitech.2012.12.020

Subramaniam, Kalaivani, Amit Das ja Gert Heinrich. "Improved oxidation resistance of conducting polychloroprene composites". Composites Science and Technology. 2013, 74. 14-19. https://doi.org/10.1016/j.compscitech.2012.10.002

Das, Amit et al. "Rubber composites based on graphene nanoplatelets, expanded graphite, carbon nanotubes and their combination: A comparative study". Composites Science and Technology. 2012, 72(16). 1961-1967. https://doi.org/10.1016/j.compscitech.2012.09.005

Kapgate, Bharat P. et al. "Effect of sol-gel derived in situ silica on the morphology and mechanical behavior of natural rubber and acrylonitrile butadiene rubber blends". JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY. 2012, 63(3). 501-509. https://doi.org/10.1007/s10971-012-2812-9

Massera, Jonathan et al. "Crystallization mechanism of the bioactive glasses, 45S5 and S53P4". JOURNAL OF THE AMERICAN CERAMIC SOCIETY. 2012, 95(2). 607-613. https://doi.org/10.1111/j.1551-2916.2011.05012.x

Giammarco, James et al. "Towards universal enrichment nanocoating for IR-ATR waveguides". Chemical Communications. 2011, 47(32). 9104-9106. https://doi.org/10.1039/c1cc12780b

Subramaniam, Kalaivani, Amit Das ja Gert Heinrich. "Development of conducting polychloroprene rubber using imidazolium based ionic liquid modified multi-walled carbon nanotubes". Composites Science and Technology. 2011, 71(11). 1441-1449. https://doi.org/10.1016/j.compscitech.2011.05.018

Musgraves, J. D. et al. "Comparison of the optical, thermal and structural properties of Ge-Sb-S thin films deposited using thermal evaporation and pulsed laser deposition techniques". Acta Materialia. 2011, 59(12). 5032-5039. https://doi.org/10.1016/j.actamat.2011.04.060

Daculsi, Guy et al. "Osteoconductive properties of poly(96L/4D-lactide)/beta-tricalcium phosphate in long term animal model". Biomaterials. 2011, 32(12). 3166-3177. https://doi.org/10.1016/j.biomaterials.2011.01.033

Das, A. et al. "Reinforcement and migration of nanoclay in polychloroprene/ethylene-propylene-diene-monomer rubber blends". Composites Science and Technology. 2011, 71(3). 276-281. https://doi.org/10.1016/j.compscitech.2010.11.009

Lagerbom, Juha et al. "Gas atomized thermal spray powders of various metals and alloys". Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011. European Powder Metallurgy Association (EPMA). 2011.

Colace, Lorenzo et al. "Germanium-on-glass solar cells". 8th IEEE International Conference on Group IV Photonics, GFP 2011. 2011, 255-257. https://doi.org/10.1109/GROUP4.2011.6053781

Colace, Lorenzo, Andrea Scacchi, ja Gaetano Assanto "Noise characterization of Ge/Si photodetectors". 8th IEEE International Conference on Group IV Photonics, GFP 2011. 2011, 290-292. https://doi.org/10.1109/GROUP4.2011.6053793

Salminen, M. ja M. Heinisuo "Shear buckling and resistance of thin-walled steel plate at non-uniform elevated temperatures". 10th International Conference on Steel Space and Composite Structures. CI-Premier Pte Ltd. 2011, 267-276.