Haiko, Oskari et al. "Effect of tempering on the impact-abrasive and abrasive wear resistance of ultra-high strength steels". Wear. 2019. 440-441. https://doi.org/10.1016/j.wear.2019.203098

Mäntyranta, Aino et al. "Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution". Tribology International. 2019, 138. 250-262. https://doi.org/10.1016/j.triboint.2019.05.032

Lehmusto, Juho et al. "Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF". Materials and Corrosion. 2019. https://doi.org/10.1002/maco.201910964

Kiilakoski, J. et al. "Characterizing the micro-impact fatigue behavior of APS and HVOF-sprayed ceramic coatings". Surface and Coatings Technology. 2019, 371. 245-254. https://doi.org/10.1016/j.surfcoat.2018.10.097

Rissanen, Ilari ja Lasse Laurson. "Magnetic non-contact friction from domain wall dynamics actuated by oscillatory mechanical motion". Journal of Physics D: Applied Physics. 2019. 52(44). https://doi.org/10.1088/1361-6463/ab351f

Matikainen, V. et al. "Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes". Surface and Coatings Technology. 2019, 370. 196-212. https://doi.org/10.1016/j.surfcoat.2019.04.067

Juoksukangas, Janne et al. "Characterization of cracks formed in large flat-on-flat fretting contact". International Journal of Fatigue. 2019, 124. 361-370. https://doi.org/10.1016/j.ijfatigue.2019.03.004

Banerjee, Shib Shankar et al. "Water-Responsive and Mechanically Adaptive Natural Rubber Composites by in Situ Modification of Mineral Filler Structures". Journal of Physical Chemistry B. 2019, 123(24). 5168-5175. https://doi.org/10.1021/acs.jpcb.9b02125

Isoaho, Riku et al. "Photovoltaic properties of low-bandgap (0.7–0.9 eV) lattice-matched GaInNAsSb solar junctions grown by molecular beam epitaxy on GaAs". Solar Energy Materials and Solar Cells. 2019, 195. 198-203. https://doi.org/10.1016/j.solmat.2019.02.030

Chintha, A. R. et al. "Role of fracture toughness in impact-abrasion wear". Wear. 2019, 428-429. 430-437. https://doi.org/10.1016/j.wear.2019.03.028

Ferraris, S. et al. "Surface reactivity and silanization ability of borosilicate and Mg-Sr-based bioactive glasses". Applied Surface Science. 2019, 475. 43-55. https://doi.org/10.1016/j.apsusc.2018.12.218

Vuoristo, Petri et al. "Corrosion properties of thermally sprayed bond coatings under plasma sprayed chromia coating in sulfuric acid solutions"., Azarmi, F., Lau, Y., Veilleux, J., Widener, C. Toma, F. Koivuluoto, H. Balani, K. Li, H. Shinoda, K. (toimittaneet). International Thermal Spray Conference and Exposition, ITSC 2019: New Waves of Thermal Spray Technology for Sustainable Growth. Proceedings of the International Thermal Spray Conference. ASM International. 2019, 923-930.

Valtonen, Kati et al. "Comparison of various high-stress wear conditions and wear performance of martensitic steels". Wear. 2019, 426-427(Part A). 3-13. https://doi.org/10.1016/j.wear.2018.12.006

Hintikka, Jouko et al. "Stable and unstable friction in fretting contacts". Tribology International. 2019, 131. 73-82. https://doi.org/10.1016/j.triboint.2018.10.014

Nurmi, Verner et al. "The formation and characterization of fretting-induced degradation layers using quenched and tempered steel". Tribology International. 2019, 131. 258-267. https://doi.org/10.1016/j.triboint.2018.09.012

Karhu, Marjaana et al. "Mining tailings as raw materials for reaction-sintered aluminosilicate ceramics: Effect of mineralogical composition on microstructure and properties". Ceramics International. 2019, 45(4). 4840-4848. https://doi.org/10.1016/j.ceramint.2018.11.180

Kiilakoski, Jarkko et al. "Characterization of Powder-Precursor HVOF-Sprayed Al2O3-YSZ/ZrO2 Coatings". Journal of Thermal Spray Technology. 2019, 28(1-2). 98-107. https://doi.org/10.1007/s11666-018-0816-x

Huttunen-Saarivirta, E. et al. "Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion". Tribology International. 2019, 129. 257-271. https://doi.org/10.1016/j.triboint.2018.08.021

Valtonen, Kati et al. "Impact wear and mechanical behavior of steels at subzero temperatures". Tribology International. 2019, 129. 476-493. https://doi.org/10.1016/j.triboint.2018.08.016

Haapanen, Janne et al. "On the limit of superhydrophobicity: Defining the minimum amount of TiO2 nanoparticle coating". Materials Research Express. 2019. 6(3). https://doi.org/10.1088/2053-1591/aaf2ee

Kiilakoski, Jarkko et al. "Process Parameter Impact on Suspension-HVOF-Sprayed Cr2O3 Coatings". Journal of Thermal Spray Technology. 2019. https://doi.org/10.1007/s11666-019-00940-7

Linjamaa, A. et al. "Running-in effects on friction of journal bearings under slow sliding speeds". Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2019. https://doi.org/10.1177/1350650119864758

Banerjee, Shib Shankar et al. "Temperature scanning stress relaxation behavior of water responsive and mechanically adaptive elastomer nanocomposites". Journal of Applied Polymer Science. 2019. https://doi.org/10.1002/app.48344

Rajan, Rathish et al. "Mechanical, thermal, and burning properties of viscose fabric composites: Influence of epoxy resin modification". Journal of Applied Polymer Science. 2018. 135(36). https://doi.org/10.1002/app.46673

Hiltunen, Arto et al. "Design aspects of all atomic layer deposited TiO2–Fe2O3 scaffold-absorber photoanodes for water splitting". Sustainable Energy & Fuels. 2018, 2(9). 2124-2130. https://doi.org/10.1039/C8SE00252E

Kulju, S. et al. "Fluid flow simulations meet high-speed video: Computer vision comparison of droplet dynamics". Journal of Colloid and Interface Science. 2018, 522. 48-56. https://doi.org/10.1016/j.jcis.2018.03.053

Mikkonen, Riikka ja Matti Mäntysalo. "Evaluation of screen printed silver trace performance and long-term reliability against environmental stress on a low surface energy substrate". Microelectronics Reliability. 2018, 86. 54-65. https://doi.org/10.1016/j.microrel.2018.05.010

Kaunisto, Kimmo et al. "The effect of carbon and nickel additions on the precursor synthesis of Cr3C2-Ni nanopowder". Ceramics International. 2018, 44(8). 9338-9346. https://doi.org/10.1016/j.ceramint.2018.02.146

Ojha, N. et al. "Influence of the phosphate glass melt on the corrosion of functional particles occurring during the preparation of glass-ceramics". Ceramics International. 2018, 44(10). 11807-11811. https://doi.org/10.1016/j.ceramint.2018.03.267

Goyos-Ball, Lidia et al. "The effects of laser patterning 10CeTZP-Al2O3 nanocomposite disc surfaces: Osseous differentiation and cellular arrangement in vitro". Ceramics International. 2018, 44(8). 9472-9478. https://doi.org/10.1016/j.ceramint.2018.02.164

Saari, Jesse, Harri Ali-Löytty, ja Mika Valden Role of Oxide Defects in ALD grown TiO2 Coatings on Performance as Photoanode Protection Layer. 2018.

Rasappa, Sozaraj et al. "Morphology evolution of PS-b-PDMS block copolymer and its hierarchical directed self-assembly on block copolymer templates". Microelectronic Engineering. 2018, 192. 1-7. https://doi.org/10.1016/j.mee.2018.02.002

Sutka, Andris et al. "Switchable light reflectance in dilute magneto-optical colloids based on nickel ferrite nanowires". e-Journal of Surface Science and Nanotechnology. 2018, 16. 119-121. https://doi.org/10.1380/ejssnt.2018.119

Harra, Juha et al. "Characteristics of nFOG, an aerosol-based wet thin film coating technique". Journal of Coatings Technology Research. 2018, 15(3). 623-632. https://doi.org/10.1007/s11998-017-0022-7

Melcr, Josef et al. "Accurate Binding of Sodium and Calcium to a POPC Bilayer by Effective Inclusion of Electronic Polarization". Journal of Physical Chemistry B. 2018, 122(16). 4546-4557. https://doi.org/10.1021/acs.jpcb.7b12510

Magarkar, Aniket et al. "Membrane bound COMT isoform is an interfacial enzyme: General mechanism and new drug design paradigm". Chemical Communications. 2018, 54(28). 3440-3443. https://doi.org/10.1039/c8cc00221e

Matikainen, V. et al. "Effect of nozzle geometry on the microstructure and properties of hvaf-sprayed wc-10co4cr and cr3c2-25nicr coatings". Journal of Thermal Spray Technology. 2018, 27(4). 680-694. https://doi.org/10.1007/s11666-018-0717-z

Sassatelli, Paolo et al. "Properties of HVOF-sprayed Stellite-6 coatings". Surface and Coatings Technology. 2018, 338. 45-62. https://doi.org/10.1016/j.surfcoat.2018.01.078

Janka, Leo et al. "Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition". Surface and Coatings Technology. 2018, 337. 296-305. https://doi.org/10.1016/j.surfcoat.2018.01.035

Vaikuntam, Sankar Raman et al. "Entrapped Styrene Butadiene Polymer Chains by Sol-Gel-Derived Silica Nanoparticles with Hierarchical Raspberry Structures". Journal of Physical Chemistry B. 2018, 122(6). 2010-2022. https://doi.org/10.1021/acs.jpcb.7b11792

Yury, Korobov et al. "Arc-sprayed Fe-based coatings from coredwires for wear and corrosion protection in power engineering". Coatings. 2018. 8(2). https://doi.org/10.3390/coatings8020071

Suokas, E. ja J. Kuusipalo "Process time importance in the product properties evolvement during extrusion coating of different LDPE grades". 15th TAPPI Advanced Coating Fundamentals Symposium 2018: Charlotte; United States; 14 April 2018 through 15 April 2018. TAPPI Press. 2018, 151-159.

Saarimaa, Ville et al. "Convenient extraction method for quantification of thin zinc patina layers". Surface and Interface Analysis. 2018, 50(5). 564-570. https://doi.org/10.1002/sia.6429

Durandin, Nikita A. et al. "Efficient photon upconversion at remarkably low annihilator concentrations in a liquid polymer matrix: when less is more". Chemical Communications. 2018, 54(99). 14029-14032. https://doi.org/10.1039/c8cc07592a

Vuorinen, E. et al. "Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions". Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2018, 232(1). 3-13. https://doi.org/10.1177/1350650117739125

Cappelluti, F. et al. "Light-trapping enhanced thin-film III-V quantum dot solar cells fabricated by epitaxial lift-off". Solar Energy Materials and Solar Cells. 2018, 181. 83-92. https://doi.org/10.1016/j.solmat.2017.12.014

Koivuluoto, Heli et al. "Novel Online Diagnostic Analysis for In-Flight Particle Properties in Cold Spraying". Journal of Thermal Spray Technology. 2018, 27(3). 423–432. https://doi.org/10.1007/s11666-018-0685-3

Alekseev, Alexander et al. "Stable blue phase polymeric Langmuir-Schaefer films based on unsymmetrical hydroxyalkadiynyl N-arylcarbamate derivatives". Thin Solid Films. 2018, 645. 108-118. https://doi.org/10.1016/j.tsf.2017.10.018

Bolelli, Giovanni et al. "Tribology of FeVCrC coatings deposited by HVOF and HVAF thermal spray processes". Wear. 2018, 394-395. 113-133. https://doi.org/10.1016/j.wear.2017.10.014

Saarimaa, Ville et al. "Supercritical carbon dioxide treatment of hot dip galvanized steel as a surface treatment before coating". Surface and Coatings Technology. 2017, 331. 137-142. https://doi.org/10.1016/j.surfcoat.2017.10.047

Lisitsyna, Ekaterina S. et al. "Time-Resolved Fluorescence Spectroscopy Reveals Fine Structure and Dynamics of Poly(l-lysine) and Polyethylenimine Based DNA Polyplexes". Journal of Physical Chemistry B. 2017, 121(48). 10782-10792. https://doi.org/10.1021/acs.jpcb.7b08394

Santangelo, Paolo E. et al. "Infrared Thermography as a Non-destructive Testing Solution for Thermal Spray Metal Coatings". Journal of Thermal Spray Technology. 2017, 26(8). 1982–1993. https://doi.org/10.1007/s11666-017-0642-6

Sarlin, Essi et al. "Erosive wear of filled vinylester composites in water and acidic media at elevated temperature". Wear. 2017, 390-391. 84-92. https://doi.org/10.1016/j.wear.2017.07.011

Holmberg, Kenneth et al. "Global energy consumption due to friction and wear in the mining industry". Tribology International. 2017, 115. 116-139. https://doi.org/10.1016/j.triboint.2017.05.010

Brobbey, Kofi J. et al. "One-step flame synthesis of silver nanoparticles for roll-to-roll production of antibacterial paper". Applied Surface Science. 2017, 420. 558-565. https://doi.org/10.1016/j.apsusc.2017.05.143

Saari, Jesse Atomikerroskasvatusmenetelmällä kasvatetun titaanidioksidikalvon ominaisuudet valosähkökemiallisessa veden hajottamisessa 2017.

Välimäki, Hannu et al. "Fluorimetric oxygen sensor with an efficient optical read-out for in vitro cell models". Sensors and Actuators B: Chemical. 2017, 249. 738-746. https://doi.org/10.1016/j.snb.2017.04.182

Heinonen, Saara et al. "Investigation of long-term chemical stability of structured ZnO films in aqueous solutions of varying conditions". Thin Solid Films. 2017, 638. 410-419. https://doi.org/10.1016/j.tsf.2017.07.055

Isakov, M. et al. "Systematic analysis of coating-substrate interactions in the presence of flow localization". Surface and Coatings Technology. 2017, 324. 264-280. https://doi.org/10.1016/j.surfcoat.2017.05.040

Tkalich, Dmitry et al. "Wear of cemented tungsten carbide percussive drill–bit inserts: Laboratory and field study". Wear. 2017, 386-387. 106-117. https://doi.org/10.1016/j.wear.2017.05.010

Matikainen, V. et al. "A Study of Cr3C2-Based HVOF- and HVAF-Sprayed Coatings: Microstructure and Carbide Retention". Journal of Thermal Spray Technology. 2017, 26(6). 1-18. https://doi.org/10.1007/s11666-017-0578-x

Rahaman, Obaidur et al. "Configurational Disorder of Water Hydrogen-Bond Network at the Protein Dynamical Transition". Journal of Physical Chemistry Part B. 2017, 121(28). 6792-6798. https://doi.org/10.1021/acs.jpcb.7b03888

Poikelispää, Minna et al. "Vegetable fillers for electric stimuli responsive elastomers". Journal of Applied Polymer Science. 2017. 134(28). https://doi.org/10.1002/app.45081

Palola, S. et al. "Microwave induced hierarchical nanostructures on aramid fibers and their influence on adhesion properties in a rubber matrix". Applied Surface Science. 2017, 410. 145-153. https://doi.org/10.1016/j.apsusc.2017.03.070

Kotilainen, Minna et al. "Hafnium oxide thin films as a barrier against copper diffusion in solar absorbers". Solar Energy Materials and Solar Cells. 2017, 166. 140-146. https://doi.org/10.1016/j.solmat.2017.02.033

Baek, Jinseok et al. "Long-Range Observation of Exciplex Formation and Decay Mediated by One-Dimensional Bridges". Journal of Physical Chemistry C. 2017, 121(25). 13952-13961. https://doi.org/10.1021/acs.jpcc.7b04483

Kiilakoski, Jarkko et al. "Cavitation wear characteristics of Al2O3-ZrO2-ceramic coatings deposited by APS and HVOF -processes". Internationl Thermal Spray Conference ITSC 2017, Conference Proceedings: June 7-9, 2017, Düsseldorf, Germany.. DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V.. Düsseldorf: DVS Media GmbH. 2017, 928-933.

Ma, Li, Kari Laasonen, ja Jaakko Akola. "Catalytic Activity of AuCu Clusters on MgO(100): Effect of Alloy Composition for CO Oxidation". Journal of Physical Chemistry C. 2017, 121(20). 10876-10886. https://doi.org/10.1021/acs.jpcc.6b12054

Goh, Jing-Qiang, Jaakko Akola ja Riccardo Ferrando. "Geometric Structure and Chemical Ordering of Large AuCu Clusters: A Computational Study". Journal of Physical Chemistry C. 2017, 121(20). 10809-10816. https://doi.org/10.1021/acs.jpcc.6b11958

Virkki, Kirsi et al. "Photoinduced Electron Injection from Zinc Phthalocyanines into Zinc Oxide Nanorods: Aggregation Effects". Journal of Physical Chemistry C. 2017, 121(17). 9594-9605. https://doi.org/10.1021/acs.jpcc.7b01562

Sarjas, Heikki et al. "Abrasive-Erosive Wear of Thermally Sprayed Coatings from Experimental and Commercial Cr3C2-Based Powders". Journal of Thermal Spray Technology. 2017, 26(8). 2020–2029. https://doi.org/10.1007/s11666-017-0638-2

Haiko, O. et al. "Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel". Tribologia. 2017, 35(1-2). 5-21.

Janka, L. et al. "HVOF- and HVAF-Sprayed Cr3C2-NiCr Coatings Deposited from Feedstock Powders of Spherical Morphology: Microstructure Formation and High-Stress Abrasive Wear Resistance Up to 800 °C". Journal of Thermal Spray Technology. 2017, 26(7). 1720–1731. https://doi.org/10.1007/s11666-017-0621-y

Vuori, Leena et al. "Improved corrosion properties of Hot Dip Galvanized Steel by nanomolecular silane layers as hybrid interface between zinc and top coatings". Corrosion. 2017. 73(2). https://doi.org/10.5006/2206

Oksanen, V. T., A. J. Lehtovaara ja M. H. Kallio. "Load capacity of lubricated bismuth bronze bimetal bearing under elliptical sliding motion". Wear. 2017, 388-389. 72-80. https://doi.org/10.1016/j.wear.2017.05.001

Salpavaara, Timo et al. "Non-destructive and wireless monitoring of biodegradable polymers". Sensors and Actuators B: Chemical. 2017, 251. 1018-1025. https://doi.org/10.1016/j.snb.2017.05.116

Lampio, Kaj ja Reijo Karvinen. "Optimization of convectively cooled heat sinks". Microelectronics Reliability. 2017, 79. 473-479. https://doi.org/10.1016/j.microrel.2017.06.011

Baek, Jinseok et al. "Photophysical properties of porphyrin dimer-single-walled carbon nanotube linked systems". Journal of Physical Chemistry C. 2017. 121(39). https://doi.org/10.1021/acs.jpcc.7b08594

Matikainen, V. et al. "Sliding wear behaviour of HVOF and HVAF sprayed Cr3C2-based coatings". Wear. 2017, 388-389. 57-71. https://doi.org/10.1016/j.wear.2017.04.001

Hintikka, Jouko, Arto Lehtovaara ja Antti Mäntylä. "Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact". TRIBOLOGY TRANSACTIONS. 2017, 60(1). 70-78. https://doi.org/10.1080/10402004.2016.1146813

Javanainen, Matti et al. "Two cations, two mechanisms: Interactions of sodium and calcium with zwitterionic lipid membranes". Chemical Communications. 2017, 53(39). 5380-5383. https://doi.org/10.1039/c7cc02208e

Tuominen, Mikko et al. "Superamphiphobic overhang structured coating on a biobased material". Applied Surface Science. 2016, 389. 135-143. https://doi.org/10.1016/j.apsusc.2016.05.095

Hannula, Markku Kalevi et al. Thermal Modification of ALD Grown Titanium Oxide Ultra Thin Film for Photoanode Applications. 2016.

Varis, T. et al. "Optimization of HVOF Cr3C2-NiCr coating for increased fatigue performance". Surface and Coatings Technology. 2016, 305. 123-131. https://doi.org/10.1016/j.surfcoat.2016.08.012

Poikelispää, Minna et al. "Improvement of actuation performance of dielectric elastomers by barium titanate and carbon black fillers". Journal of Applied Polymer Science. 2016. 133(42). https://doi.org/10.1002/app.44116

Juoksukangas, Janne, Arto Lehtovaara ja Antti Mäntylä. "Experimental and numerical investigation of fretting fatigue behavior in bolted joints". Tribology International. 2016, 103. 440-448. https://doi.org/10.1016/j.triboint.2016.07.021

Lindgren, M. et al. "Erosion–corrosion resistance of various stainless steel grades in high-temperature sulfuric acid solution". Wear. 2016, 364-365. 10-21. https://doi.org/10.1016/j.wear.2016.06.007

Juoksukangas, J., A. Lehtovaara ja A. Mäntylä. "A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact". Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 2016, 230(10). 1273-1287. https://doi.org/10.1177/1350650116633573

Heinonen, Saara et al. "Photocatalytic and antibacterial properties of ZnO films with different surface topographies on stainless steel substrate". Thin Solid Films. 2016, 616. 842-849. https://doi.org/10.1016/j.tsf.2016.10.002

Myllymäki, Sami et al. "RF measurements to pinpoint defects in inkjet-printed, thermally and mechanically stressed coplanar waveguides". Microelectronics Reliability. 2016, 65. 142-150. https://doi.org/10.1016/j.microrel.2016.08.021

Robison, Aaron D. et al. "Polyarginine Interacts More Strongly and Cooperatively than Polylysine with Phospholipid Bilayers". Journal of Physical Chemistry Part B. 2016, 120(35). 9287-9296. https://doi.org/10.1021/acs.jpcb.6b05604

Mylläri, Ville et al. "Detergent impurity effect on recycled HDPE: Properties after repetitive processing". Journal of Applied Polymer Science. 2016. 133(31). https://doi.org/10.1002/app.43766

Kapgate, Bharat P. et al. "Reinforced chloroprene rubber by in situ generated silica particles: Evidence of bound rubber on the silica surface". Journal of Applied Polymer Science. 2016. 133(30). https://doi.org/10.1002/app.43717

Alekseev, Alexander et al. "The red, purple and blue modifications of polymeric unsymmetrical hydroxyalkadiynyl-N-arylcarbamate derivatives in Langmuir-Schaefer films". Thin Solid Films. 2016, 612. 463-471. https://doi.org/10.1016/j.tsf.2016.06.044

Suihkonen, Reija et al. "Erosion wear of vinylester matrix composites in aqueous and acidic environments at elevated temperatures". Wear. 2016, 358-359. 7-16. https://doi.org/10.1016/j.wear.2016.03.026

Bolelli, G. et al. "Sliding and abrasive wear behaviour of HVOF- and HVAF-sprayed Cr3C2-NiCr hardmetal coatings". Wear. 2016, 358-359. 32-50. https://doi.org/10.1016/j.wear.2016.03.034

Kiilakoski, Jarkko et al. "Characterization of High-Velocity Single Particle Impacts on Plasma-Sprayed Ceramic Coatings". Journal of Thermal Spray Technology. 2016, 25. 1127-1137. https://doi.org/10.1007/s11666-016-0428-2

Milanti, A. et al. "Microstructure and Sliding Wear Behavior of Fe-Based Coatings Manufactured with HVOF and HVAF Thermal Spray Processes". Journal of Thermal Spray Technology. 2016, 25(5). 1040–1055. https://doi.org/10.1007/s11666-016-0410-z

Polojärvi, Ville et al. "Influence of As/group-III flux ratio on defects formation and photovoltaic performance of GaInNAs solar cells". Solar Energy Materials and Solar Cells. 2016, 149. 213-220. https://doi.org/10.1016/j.solmat.2016.01.024

Hakola, Hanna et al. "Effect of Hole Transporting Material on Charge Transfer Processes in Zinc Phthalocyanine Sensitized ZnO Nanorods". Journal of Physical Chemistry C. 2016, 120(13). 7044-7051. https://doi.org/10.1021/acs.jpcc.6b01583

Janka, Leo et al. "Influence of heat treatment on the abrasive wear resistance of a Cr3C2NiCr coating deposited by an ethene-fuelled HVOF spray process". Surface and Coatings Technology. 2016, 291. 444-451. https://doi.org/10.1016/j.surfcoat.2016.02.066

Heydari, Golrokh et al. "Wetting hysteresis induced by temperature changes: Supercooled water on hydrophobic surfaces". Journal of Colloid and Interface Science. 2016, 468. 21-33. https://doi.org/10.1016/j.jcis.2016.01.040

Katava, Marina et al. "Stability and Function at High Temperature. What Makes a Thermophilic GTPase Different from Its Mesophilic Homologue". Journal of Physical Chemistry Part B. 2016, 120(10). 2721-2730. https://doi.org/10.1021/acs.jpcb.6b00306

Selvan, N. Tamil et al. "Piezoresistive natural rubber-multiwall carbon nanotube nanocomposite for sensor applications". Sensors and Actuators, A: Physical. 2016, 239. 102-113. https://doi.org/10.1016/j.sna.2016.01.004

Ali-Löytty, Harri et al. "Ambient-Pressure XPS Study of a Ni-Fe Electrocatalyst for the Oxygen Evolution Reaction". Journal of Physical Chemistry C. 2016, 120(4). 2247-2253. https://doi.org/10.1021/acs.jpcc.5b10931

Allolio, Christoph et al. "Guanidinium Pairing Facilitates Membrane Translocation". Journal of Physical Chemistry Part B. 2016, 120(1). 143-153. https://doi.org/10.1021/acs.jpcb.5b10404

Kiilakoski, Jarkko et al. "Fracture Characteristics of High-Velocity Suspension Flame-Sprayed Aluminum Oxide Coatings". International Thermal Spray Conference & Exposition, ITSC 2016. DVS Media GmbH. 2016, 466-471.

Lahti, Johanna et al. "Improved properties for packaging materials by nanoscale surface modification and ALD barrier coating". TAPPI International Conference on Nanotechnology for Renewable Materials 2016. TAPPI Press. 2016, 684-706.

Kotilainen, M. et al. "Influence of temperature-induced copper diffusion on degradation of selective chromium oxy-nitride solar absorber coatings". Solar Energy Materials and Solar Cells. 2016, 145. 323-332. https://doi.org/10.1016/j.solmat.2015.10.034

Tuominen, J. et al. "Microstructural and abrasion wear characteristics of laser-clad tool steel coatings". Surface Engineering. 2016, 32(12). 923-933. https://doi.org/10.1080/02670844.2016.1180496

Hintikka, Jouko, Arto Lehtovaara ja Antti Mäntylä. "Normal displacements in non-Coulomb friction conditions during fretting". Tribology International. 2016, 94. 633-639. https://doi.org/10.1016/j.triboint.2015.10.029

Saarinen, J. J. et al. "Roll-to-roll application of photocatalytic TiO2 nanoparticles for printed functionality". Advanced Manufacturing, Electronics and Microsystems: TechConnect Briefs 2016. TechConnect. 2016, 47-50.

Ratia, Vilma et al. "The role of edge-concentrated wear in impact-abrasion testing". Tribology Online. 2016, 11(2). 410-416. https://doi.org/10.2474/trol.11.410

Bolelli, Giovanni et al. "Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings". Tribology International. 2016, 95. 372-390. https://doi.org/10.1016/j.triboint.2015.11.036

Auer, Sanna et al. "Rapid and sensitive detection of norovirus antibodies in human serum with a biolayer interferometry biosensor". Sensors and Actuators B: Chemical. 2015, 221. 507-514. https://doi.org/10.1016/j.snb.2015.06.088

Oksanen, V. et al. "Comparison of laboratory rolling-sliding wear tests with in-service wear of nodular cast iron rollers against wire ropes". Wear. 2015, 340-341. 73-81. https://doi.org/10.1016/j.wear.2015.07.006

Tamminen, Pasi et al. "ESD qualification data used as the basis for building electrostatic discharge protected areas". Journal of Electrostatics. 2015, 77. 174-181. https://doi.org/10.1016/j.elstat.2015.08.009

Mylläri, Ville et al. "Production of sulfonated polyetheretherketone/polypropylene fibers for photoactive textiles". Journal of Applied Polymer Science. 2015. 132(39). https://doi.org/10.1002/app.42595

Orlowski, Adam et al. "PIP2 and Talin Join Forces to Activate Integrin". Journal of Physical Chemistry Part B. 2015, 119(38). 12381-12389. https://doi.org/10.1021/acs.jpcb.5b06457

Kiilakoski, J., V. Eronen, ja P. Vuoristo. "Wear Properties of Thermally Sprayed Tungsten-Carbide Coatings in Paper Machine Environments". Tribologia - Finnish Journal of Tribology. 2015, 33(2). 29.

Bhagavatheswaran, Eshwaran Subramani et al. "Construction of an Interconnected Nanostructured Carbon Black Network: Development of Highly Stretchable and Robust Elastomeric Conductors". Journal of Physical Chemistry C. 2015, 119(37). 21723-21731. https://doi.org/10.1021/acs.jpcc.5b06629

Milanti, A. et al. "Effect of spraying parameters on the microstructural and corrosion properties of HVAF-sprayed Fe-Cr-Ni-B-C coatings". Surface and Coatings Technology. 2015, 277. 81-90. https://doi.org/10.1016/j.surfcoat.2015.07.018

Goh, Jing Qiang ja Jaakko Akola. "Superatom Model for Ag-S Nanocluster with Delocalized Electrons". Journal of Physical Chemistry C. 2015, 119(36). 21165-21172. https://doi.org/10.1021/acs.jpcc.5b05824

Lepcha, A. et al. "Electrospun Black Titania Nanofibers: Influence of Hydrogen Plasma-Induced Disorder on the Electronic Structure and Photoelectrochemical Performance". Journal of Physical Chemistry C. 2015, 119(33). 18835-18842. https://doi.org/10.1021/acs.jpcc.5b02767

Kwolek, Urszula et al. "Effect of Phosphatidic Acid on Biomembrane: Experimental and Molecular Dynamics Simulations Study". Journal of Physical Chemistry Part B. 2015, 119(31). 10042-10051. https://doi.org/10.1021/acs.jpcb.5b03604

Kanerva, Ulla et al. "Evaluation of crushing strength of spray-dried MgAl2O4 granule beds". Ceramics International. 2015, 41(7). 8494-8500. https://doi.org/10.1016/j.ceramint.2015.03.056

Timr, Štěpán et al. "Nonlinear Optical Properties of Fluorescent Dyes Allow for Accurate Determination of Their Molecular Orientations in Phospholipid Membranes". Journal of Physical Chemistry Part B. 2015, 119(30). 9706-9716. https://doi.org/10.1021/acs.jpcb.5b05123

Virkki, Kirsi et al. "Photoinduced Electron Transfer in CdSe/ZnS Quantum Dot-Fullerene Hybrids". Journal of Physical Chemistry C. 2015, 119(31). 17561-17572. https://doi.org/10.1021/acs.jpcc.5b04251

Rahaman, Obaidur et al. "Role of Internal Water on Protein Thermal Stability: The Case of Homologous G Domains". Journal of Physical Chemistry Part B. 2015, 119(29). 8939-8949. https://doi.org/10.1021/jp507571u

Hintikka, Jouko, Arto Lehtovaara ja Antti Mäntylä. "Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel". Tribology International. 2015, 92. 191-202. https://doi.org/10.1016/j.triboint.2015.06.008

Mylläri, Ville, Tero-Petri Ruoko, ja Seppo Syrjälä. "A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation". Journal of Applied Polymer Science. 2015. 132(28). https://doi.org/10.1002/app.42246

Abou-Chahine, Fawzi et al. "Synthesis and Photophysical Properties of Two Diazaporphyrin-Porphyrin Hetero Dimers in Polar and Nonpolar Solutions". Journal of Physical Chemistry Part B. 2015, 119(24). 7328-7337. https://doi.org/10.1021/jp510903a

Salpavaara, Timo et al. "Passive resonance sensor based method for monitoring particle suspensions". Sensors and Actuators B: Chemical. 2015, 219. 324-330. https://doi.org/10.1016/j.snb.2015.04.121

Dzieciuch, Monika et al. "PEGylated liposomes as carriers of hydrophobic porphyrins". Journal of Physical Chemistry Part B. 2015, 119(22). 6646-6657. https://doi.org/10.1021/acs.jpcb.5b01351

Hladílková, Jana et al. "Hydration of hydroxyl and amino groups examined by molecular dynamics and neutron scattering". Journal of Physical Chemistry Part B. 2015, 119(21). 6357-6365. https://doi.org/10.1021/jp510528u

Song, Xuemei et al. "Effect of melting state on the thermal shock resistance and thermal conductivity of APS ZrO2-7.5wt.% Y2O3 coatings". Surface and Coatings Technology. 2015, 270. 132-138. https://doi.org/10.1016/j.surfcoat.2015.03.011

Kiilakoski, Jarkko et al. "Characterization Of High-Velocity Single Particle Impacts On Thermally Sprayed Ceramic Coatings". International Thermal Spray Conference & Exposition 2015. 2015.

Lindgren, M., R. Suihkonen, ja J. Vuorinen. "Erosive wear of various stainless steel grades used as impeller blade materials in high temperature aqueous slurry". Wear. 2015, 328-329. 391-400. https://doi.org/10.1016/j.wear.2015.03.014

Lindroos, Matti et al. "The effect of impact conditions on the wear and deformation behavior of wear resistant steels". Wear. 2015, 328-329. 197-205. https://doi.org/10.1016/j.wear.2015.02.032

Karilainen, Topi et al. "Oxidation of cholesterol does not alter significantly its uptake into high-density lipoprotein particles". Journal of Physical Chemistry Part B. 2015, 119(13). 4594-4600. https://doi.org/10.1021/acs.jpcb.5b00240

Varis, T. et al. "High temperature corrosion of thermally sprayed NiCr and FeCr coatings covered with a KCl-K2SO4 salt mixture". Surface and Coatings Technology. 2015, 265. 235-243. https://doi.org/10.1016/j.surfcoat.2014.11.012

Bolelli, G. et al. "Tribology of HVOF- and HVAF-sprayed WC-10Co4Cr hardmetal coatings: A comparative assessment". Surface and Coatings Technology. 2015, 265. 125-144. https://doi.org/10.1016/j.surfcoat.2015.01.048

Eshwaran, Subramani Bhagavatheswaran et al. "Exploring the role of stearic acid in modified zinc aluminum layered double hydroxides and their acrylonitrile butadiene rubber nanocomposites". Journal of Applied Polymer Science. 2015. 132(9). https://doi.org/10.1002/app.41539

Matikainen, Ville et al. "Advanced coatings by novel high-kinetic thermal spray processes". Materia. 2015, 73(1). 46-50.

Fatarelle, Enrico et al. "Sulfonated polyetheretherketone/polypropylene polymer blends for the production of photoactive materials". Journal of Applied Polymer Science. 2015. 132(8). https://doi.org/10.1002/app.41509

Goh, Jing-Qiang et al. "Silver sulfide nanoclusters and the superatom model". Journal of Physical Chemistry C. 2015, 119(3). 1583-1590. https://doi.org/10.1021/jp511037x

Ratia, Vilma et al. "Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels". Tribology Letters. 2015. 57(2). https://doi.org/10.1007/s11249-014-0460-7

Heiskanen, J. P. et al. "Aryl end-capped quaterthiophenes applied as anode interfacial layers in inverted organic solar cells". Thin Solid Films. 2015, 574. 196-206. https://doi.org/10.1016/j.tsf.2014.12.007

Niittymäki, Minna et al. "Dielectric Breakdown Strength of Thermally Sprayed Ceramic Coatings: Effects of Different Test Arrangements". Journal of Thermal Spray Technology. 2015, 24(3). 542-551. https://doi.org/10.1007/s11666-014-0211-1

Singh, Simran et al. "Digital correction of frequency response mismatches in 2-channel time-interleaved ADCs using adaptive I/Q signal processing". Analog Integrated Circuits and Signal Processing. 2015, 82(3). 543-555. https://doi.org/10.1007/s10470-014-0476-9

Milanti, A., H. Koivuluoto, ja P. Vuoristo. "Influence of the Spray Gun Type on Microstructure and Properties of HVAF Sprayed Fe-Based Corrosion Resistant Coatings". Journal of Thermal Spray Technology. 2015, 24(7). 1312-1322. https://doi.org/10.1007/s11666-015-0298-z

Björling, M. et al. "The correlation between gear contact friction and ball on disc friction measurements". Tribology International. 2015, 83. 114-119. https://doi.org/10.1016/j.triboint.2014.11.007

Lindroos, Matti et al. "The deformation, strain hardening, and wear behavior of chromium-alloyed hadfield steel in abrasive and impact conditions". Tribology Letters. 2015. 57(3). https://doi.org/10.1007/s11249-015-0477-6

Stumpel, Jelle E., Dirk J. Broer ja Albertus P H J Schenning. "Stimuli-responsive photonic polymer coatings". Chemical Communications. 2014, 50(100). 15839-15848. https://doi.org/10.1039/c4cc05072j

Palivec, Vladimír et al. "DNA lesion can facilitate base ionization: Vertical ionization energies of aqueous 8-oxoguanine and its nucleoside and nucleotide". Journal of Physical Chemistry Part B. 2014, 118(48). 13833-13837. https://doi.org/10.1021/jp5111086

Song, Xuemei et al. "Fabrication and Characterization of Amorphous Alumina-Yttria-Stabilized Zirconia Coatings by Air Plasma Spraying". Journal of Thermal Spray Technology. 2014, 23(8). 1302-1311. https://doi.org/10.1007/s11666-014-0124-z

Rasappa, Sozaraj et al. "Rapid, Brushless Self-assembly of a PS-b-PDMS Block Copolymer for Nanolithography". Colloids and Interface Science Communications. 2014, 2. 1-5. https://doi.org/10.1016/j.colcom.2014.07.001

Ojala, Niko et al. "Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels". Wear. 2014, 317(1-2). 225-232. https://doi.org/10.1016/j.wear.2014.06.003

Kapgate, Bharat P. et al. "Effect of silane integrated sol-gel derived in situ silica on the properties of nitrile rubber". Journal of Applied Polymer Science. 2014. 131(15). https://doi.org/10.1002/app.40531

Oksa, Maria, Tommi Varis ja Kimmo Ruusuvuori. "Performance testing of iron based thermally sprayed HVOF coatings in a biomass-fired fluidised bed boiler". Surface and Coatings Technology. 2014, 251. 191-200. https://doi.org/10.1016/j.surfcoat.2014.04.025

Kohagen, Miriam, Philip E. Mason ja Pavel Jungwirth. "Accurate description of calcium solvation in concentrated aqueous solutions". Journal of Physical Chemistry Part B. 2014, 118(28). 7902-7909. https://doi.org/10.1021/jp5005693

Werner, Josephina et al. "Surface behavior of hydrated guanidinium and ammonium ions: A comparative study by photoelectron spectroscopy and molecular dynamics". Journal of Physical Chemistry Part B. 2014, 118(25). 7119-7127. https://doi.org/10.1021/jp500867w

Mahmood, Nasir et al. "Carbon nanotubes-filled thermoplastic polyurethane-urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites". Journal of Applied Polymer Science. 2014. 131(11). https://doi.org/10.1002/app.40341

Ghabchi, Arash et al. "Damage mechanisms and cracking behavior of thermal sprayed WC-CoCr coating under scratch testing". Wear. 2014, 313(1-2). 97-105. https://doi.org/10.1016/j.wear.2014.02.017

Aho, Arto et al. "Composition dependent growth dynamics in molecular beam epitaxy of GaInNAs solar cells". Solar Energy Materials and Solar Cells. 2014, 124. 150-158. https://doi.org/10.1016/j.solmat.2014.01.044

Kuzmin, Michael G. et al. "Microphase mechanism of "superquenching" of luminescent probes in aqueous solutions of DNA and some other polyelectrolytes". Journal of Physical Chemistry Part B. 2014, 118(15). 4245-4252. https://doi.org/10.1021/jp500713q

Khan, M. Nuruzzaman ja Michael Zharnikov. "Fabrication of ssDNA/oligo(ethylene glycol) monolayers by promoted exchange reaction with thiol and disulfide substituents". Journal of Physical Chemistry C. 2014, 118(6). 3093-3101. https://doi.org/10.1021/jp411353f

Kulig, Waldemar ja Noam Agmon. "Both zundel and eigen isomers contribute to the IR spectrum of the gas-phase H9O4 + cluster". Journal of Physical Chemistry Part B. 2014, 118(1). 278-286. https://doi.org/10.1021/jp410446d

Varis, T. et al. "Formation mechanisms, structure, and properties of HVOF-sprayed WC-CoCr coatings: An approach toward process maps". Journal of Thermal Spray Technology. 2014, 23(6). 1009-1018. https://doi.org/10.1007/s11666-014-0110-5

Khan, M. Nuruzzaman ja Michael Zharnikov. "Fabrication of ssDNA/Oligo(ethylene glycol) monolayers and patterns by exchange reaction promoted by ultraviolet light irradiation". Journal of Physical Chemistry C. 2013, 117(47). 24883-24893. https://doi.org/10.1021/jp408819k

Hladilkova, Jana et al. "Release of halide ions from the buried active site of the haloalkane dehalogenase LinB revealed by stopped-flow fluorescence analysis and free energy calculations". Journal of Physical Chemistry Part B. 2013, 117(46). 14329-14335. https://doi.org/10.1021/jp409040u

Kalimeri, Maria et al. "How conformational flexibility stabilizes the hyperthermophilic elongation factor G-domain". Journal of Physical Chemistry Part B. 2013, 117(44). 13775-13785. https://doi.org/10.1021/jp407078z

Khan, M. Nuruzzaman et al. "Spectroscopic study of a DNA brush synthesized in situ by surface initiated enzymatic polymerization". Journal of Physical Chemistry Part B. 2013, 117(34). 9929-9938. https://doi.org/10.1021/jp404774x

Khan, M. Nuruzzaman ja Michael Zharnikov. "Irradiation promoted exchange reaction with disulfide substituents". Journal of Physical Chemistry C. 2013, 117(28). 14534-14543. https://doi.org/10.1021/jp4006026

Paterová, Jana et al. "Reversal of the hofmeister series: Specific ion effects on peptides". Journal of Physical Chemistry Part B. 2013, 117(27). 8150-8158. https://doi.org/10.1021/jp405683s

Thomann, O. et al. "Development and application of HVOF sprayed spinel protective coating for SOFC interconnects". Journal of Thermal Spray Technology. 2013, 22(5). 631-639. https://doi.org/10.1007/s11666-012-9880-9

Oksa, Maria, Satu Tuurna, ja Tommi Varis. "Increased lifetime for biomass and waste to energy power plant boilers with HVOF coatings: High temperature corrosion testing under chlorine-containing molten salt". Journal of Thermal Spray Technology. 2013, 22(5). 783-796. https://doi.org/10.1007/s11666-013-9928-5

Štěpánková, Veronika et al. "Cation-specific effects on enzymatic catalysis driven by interactions at the tunnel mouth". Journal of Physical Chemistry Part B. 2013, 117(21). 6394-6402. https://doi.org/10.1021/jp401506v

Borah, Dipu et al. "The sensitivity of random polymer brush-lamellar polystyrene-b-polymethylmethacrylate block copolymer systems to process conditions". Journal of Colloid and Interface Science. 2013, 393(1). 192-202. https://doi.org/10.1016/j.jcis.2012.10.070

Pitkänen, H. et al. "Ab initio study of the surface properties of austenitic stainless steel alloys". Surcface Science. 2013, 609. 190-194. https://doi.org/10.1016/j.susc.2012.12.007

Vazdar, Mario, Pavel Jungwirth ja Philip E. Mason. "Aqueous guanidinium-carbonate interactions by molecular dynamics and neutron scattering: Relevance to ion-protein interactions". Journal of Physical Chemistry Part B. 2013, 117(6). 1844-1848. https://doi.org/10.1021/jp310719g

Pluhařová, Eva et al. "Transforming anion instability into stability: Contrasting photoionization of three protonation forms of the phosphate ion upon moving into water". Journal of Physical Chemistry Part B. 2012, 116(44). 13254-13264. https://doi.org/10.1021/jp306348b

Rasappa, Sozaraj et al. "Block copolymer lithography: Feature size control and extension by an over-etch technique". Thin Solid Films. 2012, 522. 318-323. https://doi.org/10.1016/j.tsf.2012.09.017

Vikholm-Lundin, Inger et al. "Cysteine-tagged chimeric avidin forms high binding capacity layers directly on gold". Sensors and Actuators B: Chemical. 2012, 171-172. 440-448. https://doi.org/10.1016/j.snb.2012.05.008

Mason, Philip E., Erik Wernersson ja Pavel Jungwirth. "Accurate description of aqueous carbonate ions: An effective polarization model verified by neutron scattering". Journal of Physical Chemistry Part B. 2012, 116(28). 8145-8153. https://doi.org/10.1021/jp3008267

Vazdar, Mario et al. "Behavior of 4-hydroxynonenal in phospholipid membranes". Journal of Physical Chemistry Part B. 2012, 116(22). 6411-6415. https://doi.org/10.1021/jp3044219

Koskela, Jenni E. et al. "Surface-relief gratings and stable birefringence inscribed using light of broad spectral range in supramolecular polymer-bisazobenzene complexes". Journal of Physical Chemistry C. 2012, 116(3). 2363-2370. https://doi.org/10.1021/jp210706n

Heikkinen, Jarkko J. et al. "Printable and flexible macroporous organosilica film with high protein adsorption capacity". Thin Solid Films. 2012, 520(6). 1934-1937. https://doi.org/10.1016/j.tsf.2011.09.041

Ghabchi, A. et al. "HVOF process control enabling strategies". International Thermal Spray Conference and Exposition, ITSC 2012 - Air, Land, Water and the Human Body: Thermal Spray Science and Applications. ASM International. 2012, 465-471.

Wernersson, Erik et al. "Orientational dependence of the affinity of guanidinium ions to the water surface". Journal of Physical Chemistry Part B. 2011, 115(43). 12521-12526. https://doi.org/10.1021/jp207499s

Sorianello, V. et al. "Thermally evaporated single-crystal Germanium on Silicon". Thin Solid Films. 2011, 519(22). 8037-8040. https://doi.org/10.1016/j.tsf.2011.06.023

Giammarco, James et al. "Towards universal enrichment nanocoating for IR-ATR waveguides". Chemical Communications. 2011, 47(32). 9104-9106. https://doi.org/10.1039/c1cc12780b

Vikholm-Lundin, Inger, Sanna Auer ja Ann Charlotte Hellgren. "Detection of 3,4-methylenedioxymethamphetamine (MDMA, ecstasy) by displacement of antibodies". Sensors and Actuators B: Chemical. 2011, 156(1). 28-34. https://doi.org/10.1016/j.snb.2011.03.069

Heyda, Jan et al. "Urea and guanidinium induced denaturation of a Trp-cage miniprotein". Journal of Physical Chemistry Part B. 2011, 115(28). 8910-8924. https://doi.org/10.1021/jp200790h

Tuurna, S. et al. "Optimised selection of new protective coatings for biofuel boiler applications". Materials and Corrosion-Werkstoffe und Korrosion. 2011, 62(7). 642-649. https://doi.org/10.1002/maco.201005898

Borah, D. et al. "Plasma etch technologies for the development of ultra-small feature size transistor devices". Journal of Physics D: Applied Physics. 2011. 44(17). https://doi.org/10.1088/0022-3727/44/17/174012

Takahashi, Hideaki et al. "Energetic origin of proton affinity to the air/water interface". Journal of Physical Chemistry Part B. 2011, 115(16). 4745-4751. https://doi.org/10.1021/jp2015676

Sorianello, V. et al. "Micro-Raman characterization of Germanium thin films evaporated on various substrates". Microelectronic Engineering. 2011, 88(4). 492-495. https://doi.org/10.1016/j.mee.2010.10.028

Colace, L. et al. "Optical power monitors in Ge monolithically integrated on SOI chips". Microelectronic Engineering. 2011, 88(4). 514-517. https://doi.org/10.1016/j.mee.2010.10.033

Sorianello, V. et al. "Thermal evaporation of Ge on Si for near infrared detectors: Material and device characterization". Microelectronic Engineering. 2011, 88(4). 526-529. https://doi.org/10.1016/j.mee.2010.09.024

Pluhařová, Eva et al. "Ionization of purine tautomers in nucleobases, nucleosides, and nucleotides: From the gas phase to the aqueous environment". Journal of Physical Chemistry Part B. 2011, 115(5). 1294-1305. https://doi.org/10.1021/jp110388v

Gupta, Samit K. et al. "Interfacial design and structure of protein/polymer films on oxidized AlGaN surfaces". Journal of Physics D: Applied Physics. 2011. 44(3). https://doi.org/10.1088/0022-3727/44/3/034010

Stepien, Milcna et al. "Adjustable wetting properties of paperboard by liquid flame spray process". 11th Advanced Coating Fundamentals Symposium Proceedings: The Latest Advances in Coating Research and Development. 2010, 80-88.

Caglayan, H., I. Bulu ja E. Ozbay. "Observation of off-axis directional beaming via subwavelength asymmetric metallic gratings". Journal of Physics D: Applied Physics. 2009. 42(4). https://doi.org/10.1088/0022-3727/42/4/045105

Koivusaari, K. Jarmo, Tapio T. Rantala ja Seppo Leppävuori. "Calculated electronic density of states and structural properties of tetrahedral amorphous carbon". Diamond and Related Materials. 2000, 9(3). 736-740. https://doi.org/10.1016/S0925-9635(99)00286-1

Milne, D. et al. "Morphological and structural changes in laser CVD of silicon: comparison of theoretical temperature calculations with experimental results". Applied Surface Science. 1989, 43(1-4). 81-86. https://doi.org/10.1016/0169-4332(89)90194-3

Levoska, J., T. T. Rantala ja J. Lenkkeri. "Numerical simulation of temperature distributions in layered structures during laser processing". Applied Surface Science. 1989, 36(1-4). 12-22. https://doi.org/10.1016/0169-4332(89)90895-7

Mäkinen, J. et al. "Vacancy-type defect distributions near argon sputtered Al(100) surface studied by variable-energy positrons and molecular dynamics simulations". Surface Science. 1986, 175(2). 385-414. https://doi.org/10.1016/0039-6028(86)90242-6

Rantala, T. T., A. Rosén ja B. Hellsing. "A Finite Cluster Approach to the Electron-Hole Pair Damping of the Adsorbate Vibration: CO Adsorbed on Cu(100)". Studies in Surface Science and Catalysis. 1986, 26(C). 173-181. https://doi.org/10.1016/S0167-2991(09)61238-6