TUTCRIS - Tampereen teknillinen yliopisto

TUTCRIS

Julkaisut

  1. A4 Artikkeli konferenssijulkaisussa
  2. Julkaistu

    Social Media in Manufacturing: Just Hype or Concrete Benefits?

    Lanz, M. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (toim.). Switzerland: Springer International Publishing, s. 1023-1034 (Lecture Notes in Mechanical Engineering).

    Tutkimustuotosvertaisarvioitu

  3. Julkaistu

    A New technique for torsional vibration measurements with digital image correlation

    Hasanen, M., Saarenrinne, P. & Kokko, V., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. 6 Sivumäärä (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Tutkimustuotosvertaisarvioitu

  4. Julkaistu

    An Energy-Efficient High Performance Motion Control of a Hydraulic Crane Applying Virtual Decomposition Control

    Koivumäki, J. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, s. 4426-4433 8 Sivumäärä (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Tutkimustuotosvertaisarvioitu

  5. Julkaistu

    Decision support tool for retrofitting a district towards district as a service

    Florea, A., Postelnicu, C., Martinez Lastra, J. L., Larranaga, M., Marquez Contreras, J. A., Presser, M., Plambech, T., Colino, A. & Bayona Pons, V. M., 2013, Conference booklet, IECON 2013, 39th Annual Conference of the IEEE Industrial Electronics Society in conjunction with IWIES 2013: 1st International workshop on intelligent energy systems, Austria Center, Vienna, Austria, 10-14 November 2013. Piscataway, NJ: Institute of Electrical and Electronics Engineers, IEEE, s. 70-75 6 Sivumäärä (Annual Conference of the IEEE Industrial Electronics Society).

    Tutkimustuotosvertaisarvioitu

  6. Julkaistu

    Mechatronic design of a four wheel steering mobile robot with fault-tolerant odometry feedback

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2013, The 6th IFAC Symposium on Mechatronic Systems, IFAC MECH2013, April 10-12, 2013, Zhejiang University, Hangzhou, China. s. 663-669 7 Sivumäärä (Elsevier IFAC Publications / IFAC Proceedings series).

    Tutkimustuotosvertaisarvioitu

  7. Julkaistu

    Semantic information management for user and context aware smart home with social services

    Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2013, 3rd IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support (CogSIMA), February 26-28, 2013, San Diego, CA, USA. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 262-268 7 Sivumäärä (International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support).

    Tutkimustuotosvertaisarvioitu

  8. Julkaistu

    Energy Efficiency of Digital Hydraulic Valve Control Systems

    Huova, M., Linjama, M. & Huhtala, K., 2013, SAE 2013 Commercial Vehicle Engineering Congress (COMVEC), October 1-3, 2013, Rosemont, Illinois, USA. 13 Sivumäärä (SAE Technical Papers).

    Tutkimustuotosvertaisarvioitu

  9. Julkaistu

    An approach for OSGi and DPWS interoperability: bridning enterprise application with shop-floor

    Iarovyi, S., Garcia, J. & Martinez Lastra, J. L., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 200-205 6 Sivumäärä (IEEE international conference on industrial informatics).

    Tutkimustuotosvertaisarvioitu

  10. Julkaistu

    TUT-Microfactory – A small-size, modular and sustainable production system

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2013, Proceedings of 11th Global Conference on Sustainable Manufacturing GCSM - Innovative Solutions, Berlin, Germany, 23rd-25th September, 2013. Seliger, G. (toim.). Berlin: Technische Universität Berlin, s. 79-84 6 Sivumäärä (Global Conference on Sustainable Manufacturing).

    Tutkimustuotosvertaisarvioitu

  11. Julkaistu

    The Automation of Multi Degree of Freedom Hydraulic Crane by Using Virtual Decomposition Control

    Koivumäki, J. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2013, Mechatronics for Human Wellbeing, July 9-12, 2013, Wollongong, Australia. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, s. 912-919 8 Sivumäärä (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Tutkimustuotosvertaisarvioitu

  12. Julkaistu

    Geometry-Aided Angular Acceleration Sensing of Rigid Multi-Body Manipulator Using MEMS Rate Gyros and Linear Accelerometers

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, s. 2514-2520 7 Sivumäärä (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Tutkimustuotosvertaisarvioitu

  13. Julkaistu

    Capability-Based Approach for Evaluating the Impact of Product Requirement Changes on the Production System

    Järvenpää, E. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (toim.). Switzerland: Springer International Publishing, s. 173-185 13 Sivumäärä (Lecture Notes in Mechanical Engineering).

    Tutkimustuotosvertaisarvioitu

  14. Julkaistu

    Multi-objective optimization of electronics heat sink geometries

    Karvinen, R. & Lampio, K., 2013, Proceedings of IWHT2013, 2nd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control, October 18-21, 2013, Xi'an, China. s. 1-8 8 Sivumäärä (International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control).

    Tutkimustuotosvertaisarvioitu

  15. Julkaistu

    Engineering intelligence - Product-service concepts and requirements in industry

    Lanz, M., Nykänen, O., Aaltonen, J., Ranta, P. A., Koskinen, K. T. & Andersson, P. H., 2013, 2013 IEEE International Symposium on Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 138-141 4 Sivumäärä (International Symposium on Assembly and Manufacturing).

    Tutkimustuotosvertaisarvioitu

  16. Julkaistu

    Test bench for measuring technical cleanliness of assembled fluid power components

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, s. 1-13 13 Sivumäärä (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Tutkimustuotosvertaisarvioitu

  17. Julkaistu

    ISO 11783 compliant forest crane as a platform for automatic control

    Kalmari, J., Pihlajamäki, T., Hyyti, H., Luomaranta, M. & Visala, A., 2013, The 4th IFAC Conference on Modelling and Control in Agriculture, Horticulture and Post Harvest Industry, 28-30 August, 2013, Espoo, Finland. s. 164-169 6 Sivumäärä (Elsevier IFAC Publications / IFAC Proceedings series).

    Tutkimustuotosvertaisarvioitu

  18. Julkaistu

    Examples of technical cleanliness of fluid power components

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, s. 1-12 12 Sivumäärä (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Tutkimustuotosvertaisarvioitu

  19. Julkaistu

    Visualization of Information in a Service-Oriented Production Control System

    Lee, N. A. N., Moctezuma, L. E. G. & Lastra, J. L. M., 2013, 39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013, 10-13 November, 2013, Vienna, Austria. Piscataway, NJ: IEEE, s. 4422-4428 7 Sivumäärä

    Tutkimustuotosvertaisarvioitu

  20. Julkaistu

    Information flows in future advanced manufacturing ecosystems

    Lanz, M., Majuri, M. & Tuokko, R., 2013, IFIP WG 5.7 International conference, APMS 2013, State College, PA, USA, September 9-12, 2013, Advances in Production Management Systems. Sustainable Production and Service Supply Chains. Prabhu, V., Taisch, M. & Kiritsis, D. (toim.). Springer Berlin Heidelberg, s. 70-77 8 Sivumäärä (IFIP Advances in Information and Communication Technology; painos 414).

    Tutkimustuotosvertaisarvioitu

  21. Julkaistu

    Experimental results in Component Cleanliness of Fluid Power

    Rinkinen, J., Elo, L., Kuosku, M. & Pekkonen, J., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. 8 Sivumäärä (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Tutkimustuotosvertaisarvioitu

  22. Julkaistu

    Information Flows and Design Intent in the Core of Future Product-Services in the Field of Manufacturing Industry

    Lanz, M., Järvenpää, E. & Andersson, P., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (toim.). Trans Tech Publications, s. 103-106 4 Sivumäärä (Key Engineering Materials; painos 572).

    Tutkimustuotosvertaisarvioitu

  23. Julkaistu

    Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing

    Järvenpää, E., Lohtander, M. & Tuokko, R., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 105-108 3 Sivumäärä (International Symposium on Assembly and Manufacturing).

    Tutkimustuotosvertaisarvioitu

  24. Julkaistu

    Combined Virtual Iron Bird and Hardware-in-the-Loop Simulation Research Environment for Jet Fighter Hydraulic Systems

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (toim.). Linköping: Linköping University Electronic Press, s. 196-202 7 Sivumäärä (International Conference of the European Aerospace Societies; painos 4).

    Tutkimustuotosvertaisarvioitu

  25. Julkaistu

    Concept of product development simulator for an excavator using a haptic device

    El Dirdiry, O. & Ellman, A., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED13, Design for Harmonies, Vol 9: Design Methods and Tools, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Yong, S., Lee, S. W., Papalambros, P. & Chen, W. (toim.). Scotland: The Design Society, s. 031-038 8 Sivumäärä (International Conference on Engineering Design).

    Tutkimustuotosvertaisarvioitu

  26. Julkaistu

    Enhancement of industrial monitoring systems by utilizing context awareness

    Nieto Lee, A. & Martinez Lastra, J. L., 2013, 3rd IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support (CogSIMA), February 26-28, 2013, San Diego, CA, USA. Piscataway: Institute of Electrical and Electronics Engineers, IEEE, s. 277-284 8 Sivumäärä (IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support).

    Tutkimustuotosvertaisarvioitu

  27. Julkaistu

    Assessment of IEC-61499 and CDL for function block composition in factory-wide system integration

    Ramis, B., Garcia, J. & Martinez Lastra, J. L., 2013, Proceedings 2013 IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 212-217 6 Sivumäärä (IEEE international conference on industrial informatics).

    Tutkimustuotosvertaisarvioitu

  28. Julkaistu

    Real-Time Service-Oriented Architectures: A Data-Centric Implementation for Distributed and Heterogeneous Robotic System

    Alho, P. & Mattila, J., 2013, Proceedings of the 4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, Paderborn, Germany, June 2013.. Schirner, G., Götz, M., Rettberg, A., Zanella, M. C. & Rammig, F. J. (toim.). Springer, s. 262-271 10 Sivumäärä (IFIP Advances in Information and Communication Technology; painos 403).

    Tutkimustuotosvertaisarvioitu

  29. Julkaistu

    Modeling of Tangential Vibrations in Cylindrical Grinding Contact with Regenerative Chatter

    Järvenpää, V-M., Yuan, L., Kalbasi Shirvani, H. & Mehmood, F., 2013, Surveillance 7 - International conference, Institute of Technology of Chartres, France, October 29-30, 2013. 10 Sivumäärä (International Conference Surveillance).

    Tutkimustuotosvertaisarvioitu

  30. Julkaistu

    Aircraft Hydraulic Fluid On-Line Condition Monitoring System for Maintenance and Troubleshooting Purposes

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (toim.). Linköping: Linköping University Electronic Press, s. 188-195 8 Sivumäärä (International Conference of the European Aerospace Societies).

    Tutkimustuotosvertaisarvioitu

  31. Julkaistu

    Fatigue properties of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. & Kaplan, A., 2013, Proceedings of 32nd International Congress on Applications of Lasers & Electro-Optics ICALEO, October 6-10, 2013, Miami, FL, USA. Laser Institute of America, s. 998-1007 10 Sivumäärä P140. (International Congress on Applications of Lasers and Electro-Optics).

    Tutkimustuotosvertaisarvioitu

  32. Julkaistu

    Grid Resolution and Time Step Studies in the Case of URANS Simulation of a Cyclone Separator

    Karvinen, A. & Ahlstedt, H., 2013, The 7th Open Source CFD International Conference 2013, 24-25 October, Hamburg, Germany. s. 1-10 10 Sivumäärä (Open Source CFD International Conference).

    Tutkimustuotosvertaisarvioitu

  33. Julkaistu

    MEMS-based State Feedback Control of Multi-Body Hydraulic Manipulator

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, s. 4419-4425 7 Sivumäärä (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Tutkimustuotosvertaisarvioitu

  34. Julkaistu

    Hydraulics for High Inertia, Heavy Load Lifting Application - Comparing Different Options

    Kukkonen, S. & Mäkinen, E., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (toim.). s. 176-180 5 Sivumäärä

    Tutkimustuotosvertaisarvioitu

  35. Julkaistu

    Sliding wear of HVOF sprayed self-fluxing alloy matrix cermet particles reinforced composite coatings

    Surzhenkov, A., Antonov, M., Mikli, V., Latokartano, J., Vilgo, T. & Kulu, P., 2013, BALTTRIB´2013, VII International scientific conference, Aleksandras Stulginskis University, Kaunas, Lithuania, 14-15 November 2013. Padgurskas, J., Rukuiza, R., Kreivaitis, R. & Jankauskas, V. (toim.). s. 62-66 5 Sivumäärä (Proceedings of the international conference BALTTRIB).

    Tutkimustuotosvertaisarvioitu

  36. Julkaistu

    Open Automation of Manufacturing Systems through Integration of Ontology and Web Services

    Garetti, M., Fumagalli, L., Lobov, A. & Martinez Lastra, J. L., 2013, 7th IFAC Conference on manufacturing modelling, management and control, June 19-21, 2013. Saint Petersburg, Russia. Bakhtadze, N., Chernyshov, K., Dolgui, A. & Lototsky, V. (toim.). International Federation of Automatic Control, s. 198-203 6 Sivumäärä (Elsevier IFAC Publications / IFAC Proceedings series; painos 7).

    Tutkimustuotosvertaisarvioitu

  37. Julkaistu

    Pro-active content managing system for efficient human machine interaction in data intensive environments

    Nieto Lee, A. N., Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2013, Proceedings 2013 11th IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 790-796 6 Sivumäärä (IEEE international conference on industrial informatics).

    Tutkimustuotosvertaisarvioitu

  38. Julkaistu

    Computer-Assisted Bilateral Teleoperation System for Water Hydraulic Manipulator

    Viinikainen, M., Mattila, J. & Tuominen, J., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (toim.). s. 1-5 5 Sivumäärä

    Tutkimustuotosvertaisarvioitu

  39. Julkaistu

    Inverse Monitoring of Loading State with Output Measurements

    Dospel, V., Prokop, A., Ojala, P. & Miettinen, J., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. s. 1-8 8 Sivumäärä (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Tutkimustuotosvertaisarvioitu

  40. Julkaistu

    Fault-tolerant scheduling of stateful tasks in uniprocessor real-time systems

    Alexeev, P., Boström, P., Walden, M., Huova, M., Linjama, M. & Sere, K., 2013, 3rd International Conference on Pervasive Embedded Computing and Communication Systems, PECCS 2013, Barcelona, Spain, 19.-21.2.2013. Benavente-Peces, C. & Filipe, J. (toim.). SCITEPRESS, s. 189-194 6 Sivumäärä (International Conference on Pervasive Embedded Computing and Communication Systems).

    Tutkimustuotosvertaisarvioitu

  41. Julkaistu

    A genetic algorithm for optimizing vector-based paths of industrial manipulators

    Gonzalez Moctezuma, L. E., Nieto Lee, A. & Martinez Lastra, J. L., 2013, INDIN 2013, IEEE international conference on industrial informatics, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 286-292 8 Sivumäärä (IEEE international conference on industrial informatics).

    Tutkimustuotosvertaisarvioitu

  42. Julkaistu

    An extended second order polynomial model for hydraulic fluid density

    Karjalainen, J. P., Karjalainen, R. & Huhtala, K., 2013, Proceedings of the ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, s. 1-8 8 Sivumäärä (Symposium on Fluid Power and Motion Control).

    Tutkimustuotosvertaisarvioitu

  43. Julkaistu

    Process for Evaluation and Validation of Non-Original Components for Aircraft Hydraulic Systems

    Aaltonen, J., Alarotu, V., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (toim.). Linköping: Linköping University Electronic Press, s. 693-699 7 Sivumäärä (International Conference of the European Aerospace Societies).

    Tutkimustuotosvertaisarvioitu

  44. Julkaistu

    Remote Handling Control System for Water Hydraulic Mover

    Tuominen, J. & Mattila, J., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (toim.). s. 387-391 5 Sivumäärä

    Tutkimustuotosvertaisarvioitu

  45. Julkaistu

    Dynamic Modeling and Simulation of a Cylindrical Grinder in Presence of Non-linear Friction Effect

    Kalbasi Shirvani, H., Järvenpää, V-M. & Yuan, L., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (toim.). Zilina: EDIS, s. 47-52 6 Sivumäärä

    Tutkimustuotosvertaisarvioitu

  46. Julkaistu

    Capability-Based Adaptation of Production Systems - Practical Case Study in TUT-Microfactory Environment

    Järvenpää, E., Lanz, M. & Tuokko, R., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (toim.). Trans Tech Publications, s. 245-248 4 Sivumäärä (Key Engineering Materials; painos 572).

    Tutkimustuotosvertaisarvioitu

  47. Julkaistu

    New energy efficient solutions to mobile machines

    Huhtala, K., Ahopelto, M., Heikkilä, M., Backas, J., Tammisto, J., Huova, M. & Linjama, M., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (toim.). s. 38-52 15 Sivumäärä

    Tutkimustuotosvertaisarvioitu

  48. Julkaistu

    Optimal geometry of single fins and fin arrays

    Lindstedt, M. & Karvinen, R., 2013, Eurotherm Seminar No 96, Convective Heat Transfer Enhancement 17-18 September 2013, Royal Military Academy, Brussels, Belgium. Ecole Royale Militaire; von Karman Insitute for fluid dynamics; Universite de Valenciennes et du Hainaut-Cambresis, s. 1-6 6 Sivumäärä 33

    Tutkimustuotosvertaisarvioitu

  49. Julkaistu

    A positive tensions PID controller for a planar cable robot: An experimental study

    Khosravi, M. A., Taghirad, H. D. & Oftadeh, R., 2013, 2013 1st RSI/ISM International Conference on Robotics and Mechatronics, ICRoM 2013, Tehran, Iran, 13.-15.2.2013. s. 325-330 6 Sivumäärä (International Conference on Robotics and Mechatronics).

    Tutkimustuotosvertaisarvioitu

  50. Julkaistu

    Product strategies in merchant ship and airliner industries

    Lehtinen, J., Lehtonen, T., Pakkanen, J. & Riitahuhta, A., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED 13, Design for Harmonies, Vol 3: Design Organisation and Management, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., de Weck, O. & Hong, Y. S. (toim.). Scotland: The Design Society, s. 201-210 10 Sivumäärä (International Conference on Engineering Design).

    Tutkimustuotosvertaisarvioitu

  51. Julkaistu

    Stability Analysis of Two Time Delays in Cylindrical Grinding Machine by D-subdivion Method

    Mehmood, F., Yuan, L., Järvenpää, V-M. & Heshmatimanesh, F., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (toim.). Zilina: EDIS, s. 53-57 5 Sivumäärä

    Tutkimustuotosvertaisarvioitu

  52. Julkaistu

    Dynamic simulation of dependability of nickel reduction plant

    Penttilä, J. & Ikonen, V., 2013, Proceedings fo the ASEM 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013, November 15-21, 2013, San Diego, California, USA. ASME, s. 1-7 7 Sivumäärä 64308. (ASME International Mechanical Engineerig Congress and Exposition).

    Tutkimustuotosvertaisarvioitu

  53. Julkaistu

    Recognition of Operating States of a Medium-Sized Mobile Machine

    Krogerus, T., Hyvönen, M., Raivio, K. & Huhtala, K., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. s. 1-10 10 Sivumäärä (Scandinavian International Conference on Fluid Power).

    Tutkimustuotosvertaisarvioitu

  54. Julkaistu

    Agent-based control of operational conditions for smart factories: the peak load management scenario

    Florea, A., Lauttamus, J., Postelnicu, C. & Martinez Lastra, J. L., 2013, Industrial applications of holonic and multi-agent systems, Proceedings of 6th international conference, HoloMAS 2013, Prague, Czech Repulic, August 26-28, 2013. Marik, V., Martinez Lastra, J. L. & Skobelev, P. (toim.). Berlin: Springer, s. 83-94 (Lecture Notes in Computer Science; painos 8062).

    Tutkimustuotosvertaisarvioitu

  55. Julkaistu

    Aligning product design methods and tools for sustainability

    Nahkala, S., 2013, Proceedings of the 20th CIRP, International Conference on life cycle engineering, Singapore, 17-19 April, 2013. Nee, A. Y. C., Song, B. & Ong, S-K. (toim.). Springer Singapore, s. 53-58 6 Sivumäärä (Re-engineering manufacturing for sustainability).

    Tutkimustuotosvertaisarvioitu

  56. Julkaistu

    Maintaining a dynamic view of semantic web services representing factory automation systems

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2013, IEEE 20th International Conference on Web Services June 27-July 2, 2013, Santa Clara Marriott, CA, USA. O´Connor, L. (toim.). Los Alamitos, CA: Institute of Electrical and Electronics Engineers, s. 419-426 8 Sivumäärä (IEEE international conference on web services).

    Tutkimustuotosvertaisarvioitu

  57. Julkaistu

    Improved energy efficiency and controllability of mobile work machines by reduced engine rotational speed

    Ahopelto, M., Backas, J., Ghabcheloo, R. & Huhtala, K., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, s. 1-8 8 Sivumäärä 64239. (ASME International Mechanical Engineerig Congress and Exposition).

    Tutkimustuotosvertaisarvioitu

  58. Julkaistu

    Retrospective study on teaching engineering design and product development

    Lehtonen, T., Juuti, T., Rättyä, K. & Vanhatalo, M., 2013, E&PDE 2013, the 15th international conference on engineering and product design education, Design education - Growing our future, Dublin, Ireland, 5-6 September, 2013. Bohemia, E., Ion, W., Kovacevic, A., Lawlor, J., McGrath, M., McMahon, C., Parkinson, B., Reilly, G., Ring, M., Simpson, R. & Tormey, D. (toim.). Glasgow: The Design Society, Institution of Engineering Designers, s. 414-419 6 Sivumäärä (International Conference on Engineering and Product Design Education).

    Tutkimustuotosvertaisarvioitu

  59. Julkaistu

    A builder for adaptable human machine interfaces for mobile devices

    Neira, O., Nieto Lee, A., Martinez Lastra, J. L. & Camp, R. S., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 750-755 6 Sivumäärä (IEEE international conference on industrial informatics).

    Tutkimustuotosvertaisarvioitu

  60. Julkaistu

    URB-Grade: Plataforma software para la ayuda a la toma de decisiones correctoras de eficiencia energetica

    Larranaga Negro, M., Martinez Lastra, J. L., Colino, A. & Marquez Contreras, J. A., 2013, III Congreso de servicios energeticos, ESES comunicaciones, Bilbao, 1 y 2 octubre 2013, Palacio Euskalduna. Editorial tecnica el instaldor, s. 291-296 6 Sivumäärä (Congreso de servicios energeticos).

    Tutkimustuotosvertaisarvioitu

  61. Julkaistu

    Experiences of Online Measurements in Technical Cleanliness of Fluid Power System

    Elo, L., Pekkonen, J. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, s. 1-9 9 Sivumäärä (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Tutkimustuotosvertaisarvioitu

  62. Julkaistu

    Dynamics of single-hit pneumatic test drill for pulse-shaping analysis of impacting waves

    Montonen, J., Keskinen, E., Cotsaftis, M., Miettinen, J. & Seemann, W., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, s. 1-7 7 Sivumäärä 64835. (ASME International Mechanical Engineerig Congress and Exposition).

    Tutkimustuotosvertaisarvioitu

  63. Julkaistu

    Internal leakage fault detection for variable displacement axial piston pump

    Kivelä, T. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. s. 1-9 9 Sivumäärä (Symposium on Fluid Power and Motion Control).

    Tutkimustuotosvertaisarvioitu

  64. Julkaistu

    Advanced concepts for flexible data integration in heterogeneous production environments

    Dennert, A., Garcia Izaguirre Montemayor, J., Krause, J., Hesse, S., Martinez Lastra, J. L. & Wollschlaeger, M., 2013, 11th IFAC Workshop on intelligent manufacturing systems, The international federation of automatic control, May 22-24, 2013. São Paulo, Brazil. Tsuzuki, M. D. S. G. & José, R. (toim.). International Federation of Automatic Control IFAC, s. 348-353 6 Sivumäärä (Elsevier IFAC Publications / IFAC Proceedings series; painos 11).

    Tutkimustuotosvertaisarvioitu

  65. Julkaistu

    Mems sensor network based anti-sway control system for articulated hydraulic crane

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. s. 1-9 9 Sivumäärä (Symposium on Fluid Power and Motion Control).

    Tutkimustuotosvertaisarvioitu

  66. Julkaistu

    Value of virtual prototyping - a strategic resource besed view

    Leino, S-P. S., Koivisto, T. & Riitahuhta, A., 2013, Proceedings of The 19th International Conference on Engineering Design ICED13, Design for Harmonies, Vol 4: Product, Service and Systems Design, 19th-22nd August 2013 Sungkyunkwan University Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., de Weck, O. & Hong, Y. S. (toim.). Scotland: The Design Society, s. 249-258 10 Sivumäärä (International Conference on Engineering Design).

    Tutkimustuotosvertaisarvioitu

  67. Julkaistu

    Current research in component cleanliness of fluid power

    Rinkinen, J., Elo, L., Kuosku, M. & Pekkonen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, 17 Sivumäärä (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Tutkimustuotosvertaisarvioitu

  68. Julkaistu

    Generic Microcontroller Board for Automated Heavy Machinery with Modular Control System

    Karhu, O. & Huhtala, K., 2013, SAE 2013 Commercial Vehicle Engineering Congress (COMVEC), October 1-3, 2013, Rosemont, Illinois, USA. SAE, s. 1-7 7 Sivumäärä 2013-01-2386. (SAE Technical Papers).

    Tutkimustuotosvertaisarvioitu

  69. Julkaistu

    Sustainability performance indicators for supporting the realization of sustainable and energy-efficient manufacturing

    Tapaninaho, M., Koho, M., Nylund, H., Heilala, J. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (toim.). Springer International Publishing, s. 1677-1688 12 Sivumäärä (Lecture Notes in Mechanical Engineering).

    Tutkimustuotosvertaisarvioitu

  70. Julkaistu

    Early design verification of ITER remote handling systems using Digital Mock-Ups within simulation lifecycle environment

    Sibois, R., Määttä, T., Siuko, M. & Mattila, J., 2013, 2013 IEEE 25th Symposium on Fusion Engineering, SOFE 2013, San Francisco, CA, USA, 10.-14.6.2013. Institute of Electrical and Electronics Engineers IEEE, s. 1-6 6 Sivumäärä (IEEE Symposium on Fusion Engineering).

    Tutkimustuotosvertaisarvioitu

  71. Julkaistu

    Bounded-Velocity Motion Control of Four Wheel Steered Mobile Robots

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2013, Mechatronics for Human Wellbeing, July 9-12, 2013, Wollongong, Australia. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, s. 255-260 6 Sivumäärä (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Tutkimustuotosvertaisarvioitu

  72. Julkaistu

    Evaluating the confidence level of prognostic predictions

    Lumme, V. & Pylvänen, M., 2012, 2012 IEEE Conference on Prognostics and Health Management PHM, 18-21 June 2012, Denver, CO, USA. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, s. 1-6 6 Sivumäärä (IEEE International Conference on Prognostics and Health Management).

    Tutkimustuotosvertaisarvioitu

  73. Julkaistu

    A flexible laser micro-machining platform

    Vihinen, J., Latokartano, J. & Kumpulainen, T., 2012, Proceedings of The 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (toim.). Tampere: Tampere University of Technology, s. 1-6 6 Sivumäärä (International Workshop on MicroFactories).

    Tutkimustuotosvertaisarvioitu

  74. Julkaistu

    Laminated manifold for digital hydraulics - principles, challenges and benefits

    Paloniitty, M., Karvonen, M., Linjama, M. & Tiainen, T., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (toim.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, s. 27-42 (Workshop on digital fluid power).

    Tutkimustuotosvertaisarvioitu

  75. Julkaistu

    Real time surface tracking system in laser microprocessing

    Hautala, V., Määttänen, A. & Vihinen, J., 2012, Proceedings of the 31st International Congress on Applications of Lasers & Electro-optics, ICALEO 2012, 23-27 September, 2012, Anaheim, California, USA. Laser Institute of America, s. 983-990 M1102. (International Congress on Applications of Lasers & Electro-optics).

    Tutkimustuotosvertaisarvioitu

  76. Julkaistu

    Rakenteen vasteiden estimointi metamallien avulla

    Halonen, L. & Pajunen, S., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät Oulun yliopisto 29.-30.11.2012. Koivurova, H. & Malaska, M. (toim.). Oulu: Oulun yliopisto, s. 77-82 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Tutkimustuotosvertaisarvioitu

  77. Julkaistu

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, s. 385-396 (International Fluid Power Conference; painos 1).

    Tutkimustuotosvertaisarvioitu

  78. Julkaistu

    Applicability of market-based competition models for energy efficient factory automation systems

    Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 326-330 (IEEE International Conference on Industrial Informatics).

    Tutkimustuotosvertaisarvioitu

  79. Julkaistu

    A co-creation tool in walk-in virtual environment: making prospective work visible

    Tiainen, T., Kaapu, T., Ellman, A. & Kuusisto, J., 2012, Proceedings of the European Conference for Information Systems ECIS 2012, June 10-13, 2012 ESADE, Barcelona, Spain. s. 1-11 11 Sivumäärä Paper 43. (European Conference on Information Systems).

    Tutkimustuotosvertaisarvioitu

  80. Julkaistu

    A cross-layer approach to energy management in manufacturing

    Florea, A., Garcia Izaguirre Montemayor, J. A., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 304-308 (IEEE International Conference on Industrial Informatics).

    Tutkimustuotosvertaisarvioitu

  81. Julkaistu

    Free shape paths in industrial robots

    Gonzalez Moctezuma, L. E., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of the 38th Annual Conference of the IEEE Industrial Electronics Society, IECON 2012, 25-28 October, 2012, Montreal, Quebec, Canada. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, s. 3739-3743 (Annual Conference of the IEEE Industrial Electronics Society).

    Tutkimustuotosvertaisarvioitu

  82. Julkaistu

    Implementation of a digital hydraulic valve system with Bosch Rexroth sec valves

    Ketonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (toim.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, s. 161-174 (Workshop on digital fluid power).

    Tutkimustuotosvertaisarvioitu

  83. Julkaistu

    Embedded service oriented diagnostics based on energy consumption

    Postelnicu, C., Khajehzadeh, N. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE 6th International Conference on Information and Automation for Sustainability, ICIAFS 2012, 27-29 September, 2012, Beijing, China. Piscataway, NJ: IEEE, s. 42-46 (International Conference on Information and Automation for Sustainability).

    Tutkimustuotosvertaisarvioitu

  84. Julkaistu

    Evaluation of the teaching of a simple theory through different teaching disciplines

    Saarenrinne, P., 2012, ICERI2012 Proceedings, 5th International Conference of Education, Research and Innovation 19.-21.11.2012, Madrid, Spain. Barcelona: International Association of Technology, Education and Development IATED, s. 939-942 (International Conference of Education, Research and Innovation).

    Tutkimustuotosvertaisarvioitu

  85. Julkaistu

    Two thermodynamically consistent formulations of strain-rate dependent ductile-to-brittle transition model

    Hartikainen, J., Kolari, K., Kouhia, R. & Yaghoubi, S. T., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (toim.). Oulu: Oulun yliopisto, s. 185-190 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Tutkimustuotosvertaisarvioitu

  86. Julkaistu

    Simulations with fault-tolerant controller software of a digital valve

    Huova, M., Ketonen, M., Alexeev, P., Boström, P., Linjama, M., Walden, M. & Sere, K., 2012, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (toim.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, s. 223-242 (Digital fluid power).

    Tutkimustuotosvertaisarvioitu

  87. Julkaistu

    An open energy consumption-relevant factory automation dataset in the cloud

    Zhang, B., Postelnicu, C., Jokinen, J. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 792-797 (IEEE International Conference on Industrial Informatics).

    Tutkimustuotosvertaisarvioitu

  88. Julkaistu

    Capturing the flows of the product process

    Pakkanen, J., Becker, I., Lehtonen, T. & Juuti, T., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (toim.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, s. 1557-1566 (International Design Conference).

    Tutkimustuotosvertaisarvioitu

  89. Julkaistu

    Supporting manufacturing companies on utilizing environmental performance metrics

    Nylund, H., Tapaninaho, M., Kirman, B., Koho, M. & Torvinen, S., 2012, The 10th Global Conference on Sustainable Manufacturing, GCSM 2012, 31 October - 2 November, 2012, Istanbul, Turkey. Seliger, G. & Kylyc, S. E. (toim.). GCSM, s. 582-587 (Global Conference on Sustainable Manufacturing).

    Tutkimustuotosvertaisarvioitu

  90. Julkaistu

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J-W., 2012, ICIES2012, The 1st International Conference on Innovative Engineering, 7-9 December 2012, Alexandria, Egypt,. Institute of Electrical and Electronics Engineers IEEE, s. 166-171 6 Sivumäärä (International Conference on Innovative Engineering).

    Tutkimustuotosvertaisarvioitu

  91. Julkaistu

    Reliability management in conceptual design - experiences from two practical cases

    Valkokari, P., Ahonen, T., Jännes, J., Välisalo, T. & Ellman, A., 2012, Proceedings of 11the International Probabilistic Safety Assessment and Management Conference & The Annual European Safety and Reliability Conference (PSAM11, ESREL 2012), Helsinki 25-29 June 2012. Red Hook, NY: Curran Associates, s. 1085-1093 (International Probabilistic Safety Assessment and Management Conference & The Annual European Safety and Reliability Conference).

    Tutkimustuotosvertaisarvioitu

  92. Julkaistu

    A device configuration management tool for context-aware system

    Kuutti, A., Dvoryanchikova, A., Lobov, A., Martinez Lastra, J. L. & Vahtera, T., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, s. 10-15 (IEEE International Conference on Industrial Informatics).

    Tutkimustuotosvertaisarvioitu

  93. Julkaistu

    State of the art of virtual engineering based human-machine system lifecycle knowledge transfer and management

    Leino, S-P. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (toim.). Delft, Netherlands: Delft University of Technology, s. 573-585 (International Symposium on Tools and Methods of Competitive Engineering).

    Tutkimustuotosvertaisarvioitu

  94. Julkaistu

    Ecosystem oriented energy management: an implementation

    Florea, A., Postelnicu, C., Zhang, B. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, October 14-17 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, s. 912-918 (IEEE International Conference on Systems, Man, and Cybernetics).

    Tutkimustuotosvertaisarvioitu

  95. Julkaistu

    Design-optimization of cylindrical, layered composite structures using efficient laminate parameterization

    Mönicke, A., Katajisto, H., Leroy, M., Petermann, N., Kere, P. & Perillo, M., 2012, 12th European Conference on Spacecraft Structures, Materials and Environmental Testing, Noordwijk, the Netherlands, 20-23 March, 2012. ESA SP. European Space Agency, s. 1-6 6 Sivumäärä (ESA - SP; painos 691).

    Tutkimustuotosvertaisarvioitu

  96. Julkaistu

    Unified Framework for Rapid Prototyping of Linux based Real-Time Controllers with Matlab and Simulink

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2012, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2012, Ambassador Hotel, July 11-14, Kaohsiung, Taiwan. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, s. 274 - 279 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Tutkimustuotosvertaisarvioitu

  97. Julkaistu

    Effect of oil viscosity on filter performance in lubrication oil system

    Heiskanen, V., Mäkelä, T., Kapanen, P. & Rinkinen, J., 2012, Proceedings of the 11th World Filtration Congress & Exhibition, WFC11, April 16-20, 2012, Graz, Austria. Vienna, Austria: Gesellschaft Österreichischer Chemiker GÖCH, s. 1-15 15 Sivumäärä (World Filtration Congress).

    Tutkimustuotosvertaisarvioitu

  98. Julkaistu

    Retrofitting a factory automation system to address market needs and societal changes

    Gonzalez Moctezuma, L. E., Jokinen, J., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, s. 413-418 (IEEE International Conference on Industrial Informatics).

    Tutkimustuotosvertaisarvioitu

  99. Julkaistu

    Comparison of five low cost manipulators for microfactories

    Siltala, N., Vuola, A., Prusi, T., Heikkilä, R. & Tuokko, R., 2012, Proceedings of the 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (toim.). Tampere: Tampere University of Technology, s. 1-8 8 Sivumäärä (International Workshop on MicroFactories).

    Tutkimustuotosvertaisarvioitu

  100. Julkaistu

    Safety monitoring system for a manufacturing workstation using Web Service Technologies

    Karipireddy, P., Vidales, A., Jokinen, J. & Martinez Lastra, J. L., 2012, Proceedings of IEEE International Conference on Industrial Technology, IEEE-ICIT'12, 19-21 March, 2012, Athens, Greece. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, s. 800-805 (IEEE International Conference on Industrial Technology).

    Tutkimustuotosvertaisarvioitu

  101. Julkaistu

    Improving energy efficiency and productivity of existing hydraulic systems by retrofittable digital hydraulics

    Ketonen, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (toim.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, s. 63-66 (GIM Scientific Workshop).

    Tutkimustuotosvertaisarvioitu

Lataa lista Rajaa hakutulokset 1 000 tai pienemmäksi jotta voit ladata.