TUTCRIS - Tampereen teknillinen yliopisto

TUTCRIS

Temperature-induced ageing of solar absorbers on plain and anodized aluminium substrates

Tutkimustuotosvertaisarvioitu

Yksityiskohdat

AlkuperäiskieliEnglanti
Sivut244-251
Sivumäärä8
JulkaisuSolar Energy Materials and Solar Cells
Vuosikerta134
DOI - pysyväislinkit
TilaJulkaistu - maaliskuuta 2015
OKM-julkaisutyyppiA1 Alkuperäisartikkeli

Tiivistelmä

The temperature-induced ageing mechanisms and long-term stability of solar thermal absorbers having aluminium substrate with and without anodized aluminium oxide layer were investigated. A thin Al layer was used to act as an IR reflector on anodized aluminium oxide layer. The absorbers studied were industrial, sputtered chromium-based absorber coatings. The absorbers were aged by means of prolonged and extended thermal accelerated ageing studies at 248-308 degrees C.

The ageing mechanisms and degradation of the absorbers were analysed by optical measurements (solar absorptance with a UV/Vis/NIR spectrophotometer and thermal emittance by FTIR spectrophotometry), microstructural analysis using transmission electron microscope (TEM) equipped with an energy dispersive X-ray spectrometer (EDS), composition by time-of-flight elastic recoil detection analysis (TOF-ERDA), and crystal structure by grazing incidence X-ray diffraction (XRD) before and after the ageing studies. The relation between optical degradation and ageing mechanisms was studied using optical modelling and simulation with CODE Coating Designer. The results clearly demonstrated the effect of substrate material on the long-term stability of the absorber at intermediate temperatures. (C) 2014 Elsevier B.V. All rights reserved.

Tutkimusalat

Julkaisufoorumi-taso

Tilastokeskuksen tieteenalat