TUTCRIS - Tampereen teknillinen yliopisto

TUTCRIS

Thermal Cycling Reliability Analysis of an Anisotropic Conductive Adhesive Attached Large-Area Chip with Area Array Configuration

Tutkimustuotosvertaisarvioitu

Yksityiskohdat

AlkuperäiskieliEnglanti
Otsikko17th Electronics Packaging Technology Conference
KustantajaIEEE
Sivumäärä6
ISBN (elektroninen)978-1-4673-7268-8
DOI - pysyväislinkit
TilaJulkaistu - 2 joulukuuta 2015
OKM-julkaisutyyppiA4 Artikkeli konferenssijulkaisussa
TapahtumaIEEE Electronics Packaging Technology Conference -
Kesto: 1 tammikuuta 1900 → …

Conference

ConferenceIEEE Electronics Packaging Technology Conference
Ajanjakso1/01/00 → …

Tiivistelmä

The reliability of adhesive flip chip attachments was studied. A large-area chip with a great number of contacts was attached onto a flexible polyimide substrate using anisotropic conductive adhesive film (ACF). The test samples were manufactured using various bonding forces and the reliability of the assemblies was examined using a thermal cycling test. Two temperature change rates were used in the cycling test to study the effect of the change rate on the observed failure times and modes. The results show that the ACF flip chip attachment of large-area chips with matrix array interconnections is an applicable technique. Furthermore, a significant increase in the reliability of the assemblies was obtained by increasing the bonding force. However, early failures were observed in all the samples, especially in the outermost adhesive interconnections. Failure analysis performed on the samples exhibiting early failures showed signs of adhesive delamination and silicon chip cracking. No clear differences in the results between the two temperature cycling tests used were observed. However, the faster temperature change rate seemed to cause a higher number of early failures.