TUTCRIS - Tampereen teknillinen yliopisto

TUTCRIS

Thermophilic aerobic wastewater treatment, process performance, biomass characteristics, and effluent quality

Tutkimustuotosvertaisarvioitu

Yksityiskohdat

AlkuperäiskieliEnglanti
Sivut35-51
Sivumäärä17
JulkaisuReviews in Environmental Science and Bio-Technology
Vuosikerta2
Numero1
DOI - pysyväislinkit
TilaJulkaistu - 2003
Julkaistu ulkoisestiKyllä
OKM-julkaisutyyppiA1 Alkuperäisartikkeli

Tiivistelmä

Thermophilic aerobic wastewater treatment is reviewed. Thermophilic processes have been studied in laboratory and pilot-scale while full-scale applications are rare. The paper focuses on the microbiology of aerobic thermophiles, performance of the aerobic wastewater treatments, sludge yield, and alternatives to enhance performance of the thermophilic process. Thermophilic processes have been shown to operate under markedly high loading rates (30-180 kg COD m-3d-1). Reported sludge production values under thermophilic conditions vary between 0.05 and 0.3 kg SS kg CODremoved, which are about the same or lower than generally obtained in mesophilic processes. Compared to analogous mesophilic treatment, thermophilic treatment commonly suffers from poorer effluent quality, measured by lower total COD and filtrated (GF-A) COD removals. However, in the removal of soluble (bacterial membrane filtered) COD both mesophilic and thermophilic treatments have produced similar results. Sludge settleability in thermophilic processes have been reported to be better or poorer than in analogous mesophilic processes, although cases with better settling properties are rare. Combining thermophilic with mesophilic treatment or ultrafiltration may in some cases markedly improve effluent quality.