TUTCRIS - Tampereen teknillinen yliopisto

TUTCRIS

Virtual Sensing of Photovoltaic Module Operating Parameters

Tutkimustuotosvertaisarvioitu

Standard

Virtual Sensing of Photovoltaic Module Operating Parameters. / Lappalainen, Kari; Manganiello , Patrizio; Piliougine, Michel; Spagnuolo, Giovanni; Valkealahti, Seppo.

julkaisussa: IEEE Journal of Photovoltaics, Vuosikerta 10, Nro 3, 2020, s. 852-862.

Tutkimustuotosvertaisarvioitu

Harvard

Lappalainen, K, Manganiello , P, Piliougine, M, Spagnuolo, G & Valkealahti, S 2020, 'Virtual Sensing of Photovoltaic Module Operating Parameters', IEEE Journal of Photovoltaics, Vuosikerta. 10, Nro 3, Sivut 852-862. https://doi.org/10.1109/JPHOTOV.2020.2972688

APA

Lappalainen, K., Manganiello , P., Piliougine, M., Spagnuolo, G., & Valkealahti, S. (2020). Virtual Sensing of Photovoltaic Module Operating Parameters. IEEE Journal of Photovoltaics, 10(3), 852-862. https://doi.org/10.1109/JPHOTOV.2020.2972688

Vancouver

Lappalainen K, Manganiello P, Piliougine M, Spagnuolo G, Valkealahti S. Virtual Sensing of Photovoltaic Module Operating Parameters. IEEE Journal of Photovoltaics. 2020;10(3):852-862. https://doi.org/10.1109/JPHOTOV.2020.2972688

Author

Lappalainen, Kari ; Manganiello , Patrizio ; Piliougine, Michel ; Spagnuolo, Giovanni ; Valkealahti, Seppo. / Virtual Sensing of Photovoltaic Module Operating Parameters. Julkaisussa: IEEE Journal of Photovoltaics. 2020 ; Vuosikerta 10, Nro 3. Sivut 852-862.

Bibtex - Lataa

@article{e07b79de7c934d1db06e2e07e6ce174f,
title = "Virtual Sensing of Photovoltaic Module Operating Parameters",
abstract = "The single diode equivalent circuit allows describing photovoltaic panels behavior quite accurately. The values of the five parameters appearing in this model are usually identified in standard test conditions, at which irradiance and temperature values are given. Instead, when this identification has to be performed on field, suitable environmental sensors are required. In this article, a procedure for the on-site identification of the single diode model parameters as well as of the working irradiance and temperature conditions is presented. The procedure operates only on the measured panel current versus voltage curve, or on a part of it around the maximum power point, and does not need any other input data. A consolidated identification algorithm, effectively running on any embedded system for on-site application, is used. The proposed procedure is validated through a large number of experimental measurements acquired in two different geographic locations.",
author = "Kari Lappalainen and Patrizio Manganiello and Michel Piliougine and Giovanni Spagnuolo and Seppo Valkealahti",
year = "2020",
doi = "10.1109/JPHOTOV.2020.2972688",
language = "English",
volume = "10",
pages = "852--862",
journal = "IEEE Journal of Photovoltaics",
issn = "2156-3381",
publisher = "Institute of Electrical and Electronics Engineers",
number = "3",

}

RIS (suitable for import to EndNote) - Lataa

TY - JOUR

T1 - Virtual Sensing of Photovoltaic Module Operating Parameters

AU - Lappalainen, Kari

AU - Manganiello , Patrizio

AU - Piliougine, Michel

AU - Spagnuolo, Giovanni

AU - Valkealahti, Seppo

PY - 2020

Y1 - 2020

N2 - The single diode equivalent circuit allows describing photovoltaic panels behavior quite accurately. The values of the five parameters appearing in this model are usually identified in standard test conditions, at which irradiance and temperature values are given. Instead, when this identification has to be performed on field, suitable environmental sensors are required. In this article, a procedure for the on-site identification of the single diode model parameters as well as of the working irradiance and temperature conditions is presented. The procedure operates only on the measured panel current versus voltage curve, or on a part of it around the maximum power point, and does not need any other input data. A consolidated identification algorithm, effectively running on any embedded system for on-site application, is used. The proposed procedure is validated through a large number of experimental measurements acquired in two different geographic locations.

AB - The single diode equivalent circuit allows describing photovoltaic panels behavior quite accurately. The values of the five parameters appearing in this model are usually identified in standard test conditions, at which irradiance and temperature values are given. Instead, when this identification has to be performed on field, suitable environmental sensors are required. In this article, a procedure for the on-site identification of the single diode model parameters as well as of the working irradiance and temperature conditions is presented. The procedure operates only on the measured panel current versus voltage curve, or on a part of it around the maximum power point, and does not need any other input data. A consolidated identification algorithm, effectively running on any embedded system for on-site application, is used. The proposed procedure is validated through a large number of experimental measurements acquired in two different geographic locations.

U2 - 10.1109/JPHOTOV.2020.2972688

DO - 10.1109/JPHOTOV.2020.2972688

M3 - Article

VL - 10

SP - 852

EP - 862

JO - IEEE Journal of Photovoltaics

JF - IEEE Journal of Photovoltaics

SN - 2156-3381

IS - 3

ER -